SPECIAL REPAIR TO BLDG NOS P-167 ( OFFRS MD ACCN ) ,

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

Taking up or down 15 mm bore steel tubing with connections including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Dismantling wrought iron or mild steel of any description not otherwise provided for etc complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Dismantling timber scantling 40 sqcm and over in section in any position , unframed work etc complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each including all builders hardware etc complete all as specified and as directed.

Taking down shutter , not exc. 1.0 Sqm each and removing from site with all builders hardware etc complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each etc complete all as specified and as directed.

Dismantling Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for Non - Skid ceramic tiles, coloured designer tiles , 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement sand mortar (1:6), complete all as specified and as directed

M&L for Glazed ceramic coloured tiles, 300 mm X 200 mm , 7-8 mm thick, conforming to IS 15622, on vertical surfaces of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement sand mortar (1:4), complete all as specified and as directed.

M&L for 18-20 mm thick granite of any type of work , table rubbed and polished in steps , jambs , pillar , cooking platform and the like cement sand mortar ( 1:4 ) including pointing in white cement ( 1:2) with marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement sand mortar ( 1:6 ) etc complete all as specified and as directed.

S&F 15 mm bore GI water tubing , medium grade, including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union including necessary cutting , chasing , pinning and fixed on wall and ceiling using GI fasterners or laid in floor including making good to disturbed surfaces as per existing etc complete all as directed.

S&F 20 mm bore GI water tubing , medium grade, including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union including necessary cutting , chasing , pinning and fixed on wall and ceiling using GI fasterners or laid in floor including making good to disturbed surfaces as per existing etc complete all as directed.

S&F in repair Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar 1:4 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460mm x 460mm x 230mm etc complete all as directed. Make:- Nirali , model no Omni Glossy

S&F PVC waste pipe suitable for sink 450 mm long PTMT etc complete all as directed.

S&F Mild steel work as in tubular trusses , purlins, and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering /cladding to wall / eaves and similar nature of work , fixed with self-tapping screws,complete all as specified and directed.

Removal of existing detoriated decayed tarfelt or any other treatment including PCC padding , loose surfaces by scrapping and removing the debis to to a distance n. exc. 50 m and depositing etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. etc complete all as specified and directed.

M&L for Rendering 15 mm thick, cement plaster, in cement sand mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement used or as per manufactures instructions on fair faces of brick work or concrete surface etc complete all as specified and directed. Note:-(Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound ISI marked etc complete all as specified and as diretced.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces etc complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including applying two coats of aluminium paint etc complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 using 40 mm graded aggregates as in plinth protection , finishing surface even and smooth without using extra cement , complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation , filling and mass concrete etc complete all as specified and directed

M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement sand mortar 1:4 etc complete all as specified and as directed.

M&L for post constructional anti treatment treatment of soil under existing floors using approved emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement sand mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specified and as directed.

M&L for providing and injecting approved chemical emulsion for post constructional anti treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc complete all as specified and as directed.

M&L for providing and injecting approved chemical emulsion for post constructional anti treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc. in apron etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ bricks, well klin burnt , straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:6 etc complete all as directed.

M&L for Rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement used or as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: -(Water proofing compound shall be measured and paid separately)

M&L for preparation of newly or previously untreated surfaces of wall and applying two coats of cement base paint over and including a coat of wall primer etc complete all as specified and as directed.

M&L for preparation of newly or previously untreated surfaces of wall and applying two coats of oil bound distemper over and including a coat of wall primer etc complete all as specified and as directed.

S&F 2nd class hard wood timber scantlings, clean sawn and fixed with nails in any position etc complete all as specified and directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed.

M&L for Glazed and skeleton shutters,30 mm thick , open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass , etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.

M&L for 18/19 MDF board , commercial type , fixed with screws to timber frame work as in lining , panelling and similar work as in cupboard shutter , shelf , kitchen cabinet etc complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good to dismantled portion in cement sand mortar 1:3 or Plain cement concrete 1:2:4 Type B-1 ( using 20 mm graded stone aggregate ) as required etc complete all as specified and as directed.

S&F MS work such as hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars,dovetailed or welded complete all as specified and as directed.

S&F Factory made rigidlam PVC door frame of size 125 mm x 50 mm double rebated with a wall thickness of 5 mm PVC sheet , made by joining 3 nos heat bent PVC 'C' channel of 5 mm PVC foam sheet of size 35 mm x 35 mm x 25 mm & 40 mm x 55 mm x 40 mm & 25 mm x 35 mm x 35 mm using solvent cement . The toe side 'C' channel shall be reinforced with 19 mm x 19 mm MS square tube of 19 gauge. All the three 'C' channel to flat base of 5 mm PVC sheet with solvent cement.The profile shall be mitre cut at two corners and joined by inserting 4 nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19 mm x 19 mm M.S. square tubes. The two vertical door frames are to be reinforced with 40 x 20 mm MS tubes of gauges duly filled with 2nd class hard wood throughout the frame. The door frame shall be fixed to the wall using 100 mm long nickel coated dry wheel screw through the frame by using PVC fasteeners. A minimum of 08 Nos of screws to be provided for each vertical member and minimum 4 Nos for horizontal members etc complete as per manufacturers specification and direction. Make:- Rajshri / Sintex

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M&L for Factory made solid panel wiregauged PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The panel will be of wire gauze l. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

S&F mild steel 100 mm Butt hinges,medium weight,cold rolled , and fixed etc complete all as specified and directed.

S&F mild steel 75 mm Butt hinges,medium weight,cold rolled , and fixed etc complete all as specified and directed.

S&F mild steel 50 mm Butt hinges,medium weight,cold rolled , and fixed etc complete all as specified and directed.

S&F Aluminium anodised , barrel tower bolt of extruded section 200 mm size, complete all as specified and directed.

S&F Aluminium anodised , barrel tower bolt of extruded section 100 mm size, complete all as specified and directed.

S&F Aluminium alloy extruded handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.

S&F Aluminium alloy extruded handles, fabricated type, anodized, 100 mm size, complete all as specified and directed.

S&F stainless steel magnetic hinges 19 mm long L type suitable for modular kitchen cabinet shutter etc complete all as specified and directed.

S&F stainless steel sliding channel type , size 50 mm width and 450 mm long ,suitable for modular kitchen cabinet drawers / racks etc complete all as specified and directed.

S&F 3 mm dia steel cup plate rack of basket size 4'' x 17" x 20" , ISI marked , Corrossion resistence , Seamless Glossy finish. High-Quality Product. Nickel Chrome Plated etc complete all as specified and directed.

S&F 3 mm dia steel meal plate rack of basket size 6'' x 17" x 20" , ISI marked , Corrossion resistence , Seamless Glossy finish. High-Quality Product. Nickel Chrome Plated etc complete all as specified and directed.

S&F 3 mm dia steel cutlery basket size 4'' x 17" x 20" , ISI marked , Corrossion resistence , Seamless Glossy finish. High-Quality Product. Nickel Chrome Plated etc complete all as specified and directed.

S&F 3 mm dia steel bottle basket size 8'' x 17" x 20" , ISI marked , Corrossion resistence , Seamless Glossy finish. High-Quality Product. Nickel Chrome Plated etc complete all as specified and directed.

S&F 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and as directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair curtain rails, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and as directed.

S&F in repair aluminium anodised 20 mm dia small articles such as brackets , stops , roller etc complete all as specified and as directed.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to disturbed surfaces, cutting not exc 10 cm girth etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer ,surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and applying two coats of synthetic enamel paint over a coat of red oxide primer ,surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for Brick work with half sub class‘B’ bricks, well klin burnt , straight or curved on plan to any radius, built in cement sand mortar 1:4 etc complete all as directed.

M&L for Rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and as directed.

S&F rolled Mild steel Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde E-250) quality B etc complete all as specified and as directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve,dual flush , manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge Make: SLIM LINE brand of Parryware Cat no. C08090 / SLEEK brands of Hindware or Prayag cat Part no. 504 .

S&F in repair Wash basin, Vitreous China, white, size 550 mm x 440 mm ,oval shape , counter top, including brackets (flat back or angle back type) any size,waste pipe , CP coupling 32 mm dia , including cutting for and pinning in ends of brackets or erecting stand complete all as specified. Make: Prayag cat part no. 4647 or equivalent make in Hindware / Parryware / Johnson

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm length etc complete all as specified and directed.

S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum 210 gms) etc complete all as specified and directed.

S&F in repair Bib tap , cast copper alloy,chromium plated, long body with crutch or butterfly handle , fancy type 15mm , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :Prayag cat part no. 8506 or equivalent make in Parryware / Hindware.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of acrylic distemper over a coat of suitable wall primer ( smooth bodied opaque finish surface ) over and including a layer of wall care putty 1 mm thick , chalk whitening etc complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of acrylic distemper over a coat of suitable wall primer ( smooth bodied opaque finish surface ) over and including a layer of wall care putty 1 mm thick , chalk whitening etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of acrylic emulsion paint , exterior grade , weather coat (1st class quality) over and including a coat of exterior grade wall primer etc complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of acrylic emulsion paint , exterior grade , weather coat ( 1st class quality ) over and including a coat of exterior grade wall primer including necessary preparation etc complete all as specified and as directed.

M&L for preparation of old or previously treated surfaces of wood or wooden surfaces and applying a coat of synthetic enamel paint etc complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded aggregates as in sub base of floor, finishing surface even and rough without using extra etc complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile etc complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling of grid size 605 mm x 605 mm all as specified complete all as directed.

S&F 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) all as specified complete all as directed.

S&F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber / GI / Aluminium framework with screws all as specified complete all as directed.

M&L for 50 mm thick dry sand filling under interlocking paver block including watering and consolidations etc complete all as specified and directed

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed

M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 ( Using 20 mm graded stone aggregate) as in floor , finishing surfaces fair and even without using extra cement etc complete all as specified and as directed.

M&L for Non - Skid ceramic tiles, coloured designer tiles , 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement sand mortar (1:6), complete all as specified and as directed

M&L for Non - Skid ceramic tiles, coloured designer tiles , 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, in vertical surfaces such as dado / skirtings etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement sand mortar (1:4), complete all as specified and as directed

M&L for Granite slab of approved shade 20mm thick Granite (of any type) tiles machine cut, laid over and ncluding cement screed bed 20 mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing till entire satisfaction of Engineer in Charge etc complete all as specified and as directed.

M&L for PVC tiles/ sheets,laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors etc complete all as specified and as directed.

M&L for PVC tiles/ sheets,laminated plain coloured, marbled mosaic or mottled finish, laid with approved synthetic based adhesive on vertical surfaces etc complete all as specified and as directed.

M&L for Rendering 5 mm thick, cement plaster, in cement mortar (1:3) on ceiling and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of plastic emulsion paint over a coat of suitable wall primer ( smooth bodied opaque finish surface ) over and including a layer of wall care putty of 1 mm thick , chalk whitening etc complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of plastic emulsion paint over a coat of suitable wall primer ( smooth bodied opaque finish surface ) over and including two layers of wall care putty of 1 mm thick , chalk whitening etc complete all as specified and as directed.

M&L for complete removal of existing treatment surfaces of wall and applying two coats of oil bound distemper over 3 mm thick wall care putty , chalk whitening and including a coat of wall primer etc complete all as specified and as directed.

M&L for preparation of old or previously treated surfaces of wall including cornices , pilasters etc and applying a coat of white wash etc complete all as specified and as directed.

M&L for preparation of old or previously treated surfaces of ceiling and applying a coat of white wash etc complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats etc complete all as specified and as directed.

S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F expandable aluminium grill with powder coating of any colour ( thickness of powder coating not less than 50 micron ) 7.1 mm thick , weighing 2.911 kg / sqm etc. complete all as specified and as directed. (Make:- section code 22603 of Jindal or equivalent in Hindalco / Nalco)

S&F MS Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality in squares not exceeding 0.50 sqm in each pane , fixed with glazing clips, rubber beading and EDPM gasket etc complete all as specified and as directed.

S&F Solar control film 25 micron reflective type sticked to glass panes exc 1.5 sqm , as per instructions of manufacturers etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor , overall length of cover plate 150 mm etc complete all as specified and directed.

S&F 100 mm size aluminium mortice lock etc complete all as specified and directed.

S&F double action spring hinges, 150 mm mild steel with steel wire spring, stove enamelled, black etc complete all as specified and directed.

S&F aluminium extruded section door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.

S&F aluminium alloy, anodised , sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,300 mm etc complete all as specified and directed.

M&L for Preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint etc complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n.exc. 50 m etc complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-1 using 20 mm graded aggregates as in embedding of posts etc complete all as specified and as directed.

S&F mild rolled steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 -W (Gde E- 250) etc complete all as specified and as directed.

S&FMild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 5 to 10 mm etc complete all as specified and as directed.

M&L for Preparation of surfaces of new or previously untreated surfaces of steel and iron work and treated with two coats of black bituminous paint etc complete all as specified and as directed.

E&M WORKS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc removing material to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed by Engineer -in -Charge .

M&L for Point wiring ( Concealed type) with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping 20 mm bore with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one 3 pin socket outlet 5/6 Amps / one bell point / one fan point etc on independent board controlled by one one way switch / modular switches . Note :- Cutting chases of appropriate width and depth , in any type of wall for concealed wiring shall only be done by electrically driven chase cutting machine and payment of the same and making good shall be measured and paid seperately.

All as per item No 130.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as directed by Engineer -in -Charge .

All as per item No 130.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge .

All as per item No 130.00 above but for one call bell 5 Amps controlled by one modular bell push switch , point on independent board etc complete all as directed by Engineer -in -Charge .

All as per Item No.130.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed.

S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5 Amps, flush type, , 240 volts complete all as specified and as directed.

Supply and fix Socket outlet (ISI marked), 2/3 pin and 5 Amps, flush type, , 240 volts complete all as specified and as directed.

S&F Electronic fan regulator , stepped type , 230 volts etc complete all as specified and directed.

S&F Bell push , 230 volts, 5 amps, flush type etc complete all as specified and directed.

S&F Call bell, ding dong, AC, 230 V, Single pole (ISI marked) completed all as specified and directed.

Supply and fix Switch socket combination (ISI marked), 2/3 pin and 15 Amps, flush type, , 240 volts complete all as specified and as directed.

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size and taking down old unserviceable one etc complete all as specified and directed. (Note: Two runs of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex / KEI /Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F in repair MCB , SP , 6-32 amps , 240 volts , breaking capacity 10 kA ''C'' series etc complete all as specified and directed. Make:- Legrand / L&T / Siemens

S&F in repair MCB SPN 40-63 amps 240 volts , 50 Hz , breaking capacity 10 kA ''C'' series etc complete all as specified and directed. Make:- Legrand / L&T / Siemens.

S&F in repair MCB DB SPN double door, IP-43 with 200 amps rated busbar ,earth bar , neutral links , 8 ways complete including blanking plates etc complete all as specified and directed. Make:- L&T Cat No.DBSPN008DD or equivalent Model of Make Legrand/Siemens.

S&F in repair MCB , FP , 40-63 amps 240 volts , 50 Hz , breaking capacity 10 kA ''C'' series etc complete all as specified and directed. Make:- Legrand cat part No 408794 or equivalent make in L&T / Siemens.

Taking down ceiling fan / Exhaust fan of any description for overhauling , servicing , cleaning dust , oil soots etc and lubricating moveable parts with suitable grease / oil , changing bearing and capacitor of appropriate capacity to make it serviceable including testing and depositing to E/M store etc complete all as specified and as directed.

S&F in repair recess mounted LED light fittings , 12 watt , energy efficient ,down lighter, round with polycarbonate housing, and polycarbonate diffuser , lumen efficasy upto 100lm/W CRI > 80 intrgrated driver , integrated colour temperature 6500 K , surge protection 2.5 KV etc complete all as specified and directed. Make:- CG cat part No LCDEP - 12 - CDL or equivalent make in Philips / Havells.

S&F Building security light luminiries housing of versatile pressure die cast aluminium IP-66 with high power LED light 20 watt 230 volts 50 Hz including all accessories , pre-wired including connecting up with 2.5 sqmm multi stranded aluminium conductor 2 core cables not less than 3 m length ,fixed to pole / wall etc and testing etc complete all as specified and directed.Make:- Bajaj Cat part No BCLST 20W LED or equivalent make in Havells / Crompton / Crompton.

Materials and Labour for Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised earth lead wire 4.0mm. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009)

S&F Energy efficient LED light fittings , surface & wall mounted , 4ft batten with extruded housing , 3'' x 3'' PVC block 2 Nos , Lamp , driver , connector , 230 volts , 6500K , light shade cool day light etc including suitable hanging arrangement with PVC insulated three core flexible copper conductor and necessary electric connection etc complete all as specified and directed.Make:- CG Cat part No LDL-20-CDL or equivalent make in Havells / Philips / Bajaj / Surya.

S&F Exhaust fan AC single phase 230 / 240 volts of weep 200 mm with plastic self closing louver and making necessary electric connection with flexible copper conductor cable 1.5 sqmm 3 core PVC insulated including necessary fixing arrangements with shed truss etc complete all as specified and as directed. Make:- Havells model No Ventil air or equivalent make in Usha / Crompton / Bajaj.

Supply and fix Modular Socket outlet (ISI marked), 3 pin and 6/16 Amps, combined shattered, 240 volts complete all as specified and as directed.

Supply and fix Modular Socket outlet (ISI marked), 3 pin and 6 Amps, combined shattered, 240 volts complete all as specified and as directed.

Supply and fix Modular Switch (ISI marked), 16 Amps, single pole etc complete all as specified and as directed.

Supply and fix Modular Switch (ISI marked), 6 Amps, single pole etc complete all as specified and as directed.

Supply and fix Modular fan regulator , step type , 120 watt 230 volt , electronic type , 2 module , (ISI marked), 6 Amps, single pole etc complete all as specified and as directed.

Supply and fix Modular bell push 230 volt , 1 module , (ISI marked), 6 Amps, single pole etc complete all as specified and as directed.

Supply and fix Lamp holder , PVC / Polycarbonate type with back plate for batten etc complete all as specified and as directed.

Supply and fix Modular blank plate 1 module etc complete all as specified and as directed.

S&F 10W LED polycarbonate tubelight integrated LED channel , with surface or wall mounted LED fittings etc including suitable hanging arrangement with PVC insulated three core flexible copper conductor and necessary electric connection etc complete all as specified and directed.Make:- Havells E-Lite Pride plus Neo Cat part No LHEXACP7IN1W010 or equivalent make in CG / Philips / Bajaj / Surya.

S&F Energy saving new generation 10W LED light IP-65 bulkhead luminiaries with opal diffuser complete set with lamp and making electric connections with twisted unsheathed PVC Copper cable of suitable size etc complete all as specified and directed.Make:- Havells Cat part No RUGBYNEOFT10WLED860SSYMTOPC or equivalent make in CG / Philips / Bajaj / Surya.

Taking down old unserviceable aluminium sub main wiring of any size complete with PVC conduit / casing capping and removing materials from site and making good to disturbed surfaces etc complete all as specified and directed.

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of 20 mm bore etc complete all as specified and directed. (Note: Two runs of 6.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex / KEI /Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Material and labour for sub main wiring with two single core 10.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of 25 mm dia etc complete all as specified and directed. (Note: Four runs of 10.0 sqmm cable , two runs of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex / KEI /Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F PVC casing capping 25 mm wide 1.2 mm thick including with all fittings and fixtures etc complete all as specified and directed. Make- Presto Plast / Finolex / Kalinga Fusion / Supreme.

S&F in repair MCCB DB TPN double door, IP-43 with 200 amps rated busbar ,earth bar , neutral links , 4 ways , loadline blanking plates including concealed in wall / ceiling and makiing good to disturbed surfaces etc complete all as specified and directed. Make:- Havells Cat No.DHDLVDRWGOFO004 or equivalent Model of Legrand / Siemens / L&T.

S&F in repair MCCB , FP , 40 Amps , 16 kA breaking capacity 415 volts fixed thermal and magnetic etc complete all as specified and directed. Make:- Havells / Legrand / Siemens / L&T.

S&F in repair MCB , DP , 6-32 Amps , 16 kA breaking capacity 240 volts etc complete all as specified and directed. Make:- Havells / Legrand / Siemens / L&T.

S&F in repair metal DB with clad plug and socket including DP-MCB control 3 pin & earth plug with socket , 16A , 240 volts etc complete all as specified and directed. Make:- Havells cat part No DHDPBDP016 or equivalent make in Legrand / Siemens / L&T.

S&F in repair LED Bulb 12 watt etc complete all as specified and directed. Make:- Havells cat part No LHLDEUEEML8010 or equivalent make in Legrand / Siemens / L&T.

S&F in repair LED post top light fittings 40 watt CCT 3000K with aluminium housing and injection moulded opal polycarbonate diffuser and degree of protection IP-65 etc complete all as specified and directed. Make:- CG cat part No LAPTO-40-CDL or equivalent make in Bajaj / Havells / Surya.

S&F in repair LED street light fittings 45 watt CCT 5700K with single piece pressure die cast aluminium housing and secondary optics with individual LEDs , intrgrated driver , surge protection 5KV internal & 10KV external and degree of protection IP-66 etc complete all as specified and directed. Make:- Eveready cat part No LEDSLO4515-02 code- 6R57PBA7045 or equivalent make in Bajaj / Havells / Surya.

S&F in repair Building security LED light luminiries housing of versatile pressure die cast aluminium IP-65 with high power LED light 25 watt 230 volts 50 Hz including all accessories integrated driver , surge protection 10 KV , pre-wired including connecting up with 2.5 sqmm multi stranded aluminium conductor 2 core cables not less than 3 m length ,fixed to pole / wall etc and testing etc complete all as specified and directed.Make:- Eveready cat part No LEDSLO30157-02 code- 6R57PAA7030 or equivalent make in Bajaj / Havells / Surya.

S&F in repair PVC cable end terminal junction boxes , outdoor type , 30 x20 cm , PVC door sintex box provn for cable incoming and outgoing from bottom, comprising of one MCB SP 6-32 Amps , cable glands suitable and one porcelein connector four way completed fixed on wall / pole with necessary clamps screws etc complete all as specified and directed.Make:- Sintex cat part No GSJB 3020 or equivalent make in Bajaj / Havells / Surya.

S&F in repair PVC insulated sheathed aluminium conductor cables 4 sqmm twin core as service connection cable from kisok to street light through pole etc complete all as specified and directed.Make:- Finolex / KEI / Havells / Richa / RR Kabel

TANKESWAR BORA

M/S RK SAHA AND CO

M/S DHAR AND DHAR

jawaharlal jaiswal and co

M/S DILIP GOSWAMI