Construction of Gynecology and Pediatrician Hospital for 189 beds under Vilasrao Deshmukh Medical Government Institute of Medical Science, at Patel Chowk, Latur Tq. Latur Dist. Latur.

Amount

PART – A (Work Portion)

i) Civil Work

ITEM No. 1 :- Providing and Casting RCC bored cast in-situ Vertical as per IS 2911 (Part 1, Section 2) by boring through all kinds of soils/ Sand /Rock by rotary hydraulic rigs using temporary casing up to stable strata / bentonite mud circulation as specified, from tip to cut-off elevation of piles. Reinforced Cement Concrete work of filling the bore (after placement of reinforcement cage as per drawing) with M-30 grade Ready Mix Concrete using 43 Grade Ordinary Portland Cement confirming to IS : 8112, of approved make and brand with minimum cement content of 400 kg/m3 and with water -cement ratio, including the water contained in aggregates (10 millimetre to max 20 millimetre size), not exceeding 0.45, with approved plasticizer as specified, including placing of concrete from tip to minimum of 600 millimetre above the specified cutoff level, breaking pile head to cutoff level and exposing pile reinforcement for embedment in pile cap, Disposing & levelling of bored / excavated material suitably at locations approved by the local authorities including all lead and lifts, all complete for piles having diameter of (Pile will be measured for payment for length between pile tip to cut-off level along the pile axis. Reinforcement shall be paid separately) Note : Cost of temporary casing shall be incurred by the Contractor. (R2-CS-PLG-1-1-b 600 millimetre) (Material including all lead and lifts)

ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

ITEM No. 3 :- Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete.

A) Lift from 1.50 metre to 3.00 metre

B) Lift from 3.00 metre to 4.50 metre

ITEM No. 4 :- Excavation for foundation in Hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 4.5 to 6.0 metre )

A) Lift from 4.50 metre to 6.00 metre

B) Lift from 6.00 metre to 7.50 metre

ITEM No. 5 :- Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etcetera including trimming and levelling the bed, removing the excavated material with all lifts and leads beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etcetera complete. (Lift from 7.50 metre to 9.00 metre).

A) Lift from 7.50 metre to 9.00 metre

B) Lift from 9.00 metre to 10.50 metre

ITEM No. 6 :- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5.00 kilometre lead, for all loads including all lifts involved and as directed by Engineer in charge.

ITEM No. 7 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 8 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 9 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 10 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etcetera complete.

ITEM No. 11 :- Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood / steel formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface Only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 12 :- Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimetre depth, filling the joints with 6 millimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etcetera complete. (excluding Cement concrete 1:3:6 base concrete ) (Material including all lead and lifts)

ITEM No. 13 :- Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 millimetre between rough shahabad and reinforced cement concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 millimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) (Material including all lead and lifts)

ITEM No. 14 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts) (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 15 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 16 :- Providing and laying Cast in situ / Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

ITEM No. 17 :- Providing and laying Cast in situ / Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Second Floor

B) Third Floor

C) Fourth Floor

D) Fifth Floor

E) Terrace Floor

ITEM No. 18 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Basement 2

B) Basement 1

ITEM No. 19 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 20 :- Providing and laying Cast in situ / Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 21 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 22 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lead and lifts)

ITEM No. 23 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete. (Material including all lead and lifts)

ITEM No. 24 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 25 :- Providing and laying in situ cement concrete M-20 with tremix treatment for 100 millimetre thickness for flooring with groove cutting of 4millimetre wide and 20millimetre deep with necessary refilling with bitumen etcetera complete.

ITEM No. 26 :- Providing and constructing masonry in precast solid Concrete Block (Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size (300 millimetre X 200 millimetre X 150 millimetre) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etcetera complete. (Material including all lead and lifts)

ITEM No. 27 :- Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

G) Terrace Floor

ITEM No. 28 :- Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etcetera Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

H) Terrace Floor

ITEM No. 29 :- Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etcetera Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 30 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 31 :- Providing internal / external 12 millimetre thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 32 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 33 :- Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 millimetre thick in C.M. 1:4 and rough cast treatment 12millimetre thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

G) Terrace Floor

ITEM No. 34 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 35 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etcetera complete.

A) Basement 2

B) Basement 1

C) Ground Floor

ITEM No. 36 :- Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etcetera complete.

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 37 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

H) Terrace Floor

ITEM No. 38 :- Providing waterproof plaster in W.C. and bath 12 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etcetera complete. (Excluding Tiles) (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

H) Terrace Floor

ITEM No. 39 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete. (Material including all lead and lifts) (Terrace Floor)

ITEM No. 40 :- Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etcetera, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. (Material including all lead and lifts) (Terrace Floor)

ITEM No. 41 :- Providing and applying a base coat comprising of 1 Kg Polydee-MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Terrace Floor

ITEM No. 42 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 43 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 44 :- Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 45 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. a) Flooring (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 46 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. b) Skirting (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 47 :- Providing and fixing Modular false ceiling of 600 x 600 millimetre center to center and 13 millimetre thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 millimetre x 40 millimetre) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 millimetre) flanges weighing 0.19 Kilogram/m suspended on 6 millimetre diametre mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 millimetre x 40 millimetre) weighing 0.39 Kilogram/m etcetera (all alluminium sections shall be anodized) including all labour, material, lifts etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

ITEM No. 48 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

H) Terrace Floor

ITEM No. 49 :- Providing and laying machine cut machine Polished Kota stone flooring 25 millimetre to 30 millimetre thick and required width in plain / diamond pattern on bed of 1:6 cement motor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 50 :- Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 51 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

H) Terrace Floor

ITEM No. 52 :- Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 millimetre X 450 millimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 millimetre thick supports with kadappah top 35 to 40 millimetre thick and polished granite 16 to 20 millimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etcetera complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (Material including all lead and lifts)

A) First Floor

B) Second Floor

C) Third Floor

D) Fourth Floor

E) Fifth Floor

ITEM No. 53 :- Fire Door 55 millimetre 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. a) Door Frame: Supplying and Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 millimetre spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10 millimetre X 4 millimetre affixed in the slit of the Frame for fire and smoke sealing, etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 54 :- Shutter : Supplying & Fixing of 55 millimetre thick asbestos free criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2 X 8 millimetre Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100 X 32 millimetre with 32 millimetre thick infill of ceramic fiber (density 128 Kilogram / cum), vermaculite mix faced with 3 millimetre Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10 millimetre X 4 millimetre affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 55 :- Vision Panel : 2 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 millimetre inside the shutter on all sides with U- glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 56 :- Panic Bar: (For 2 Hr fire Rated single Panic bar) Supplying, fitting and fixing Surface mounted Crash Bar/ panic Bar of touch pad style, made of heavy duty cast iron/ steel body & latches with SS, BHMA certified & conforming to ANSI A 156.3 for grade-1 ( 3 hours fire rated) and suitable for surface mounting to wooden / hollow metal / Al framed door,with maximum operating force 8 Kilogram for unlocking easily and outwardly during emergency, complete in all respect as per direction and satisfaction of Engineer in charge including all taxes and incidental charges. (Note: To be installed at "FIRE EXIT"Only. under location specific instruction of Eingineer in Charge.) (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 57 :- Door Closure: (For 2 Hr fire Rated EN-3 Door Closure) Supplying, fitting and fixing Surface mounted overhead Door Closer for 2 hour fire rated doors of different size (e.g size -EN-3 for leaf width upto 900 millimetre) CE certified, marked and conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy and Magnum etcetera) fitted and fixed Complete as per direction and satisfaction of Engineer in Charge including all taxes and incidental charges. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 58 :- 12" SS Handle : (For 2 Hr fire Rated 12"SS Handle) Supplying, fitting and fixing Stainless Steel 'D' or 'H' type of size 300 millimetre x 19 millimetre tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy and Magnum etcetera) as per direction of Eingineer -in Charge fitted and fixed complete including all taxes and incidental charges. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 59 :- Providing and fixing solid core flush door shutter commercial in single leaf 32 millimetre thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 60 :- Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 X 44.75 millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre X 44.5 millimetre X 3.00 millimetre thick top rails 47.62 X 44.45 millimetre X 3.00 millimetre thick, vertical style 47.62 X 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12 millimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250 millimetre length aluminium tower bolts, 150 millimetre diameter pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 61 :- Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre X 2.40 metre with aluminium door frame of powder coated section 101.60 X 44.75 millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre X 44.5 millimetre X 3.00 millimetre thick top rails 47.62 x 44.45 millimetre X 3.00 millimetre thick, vertical style 47.62 x 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12 millimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark, with bijagiri having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250millimetre length tower bolts, 150millimetre diam. pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

G) Terrace Floor

ITEM No. 62 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts)

A) Basement 1

B) Ground Floor

C) First Floor

D) Second Floor

E) Third Floor

F) Fourth Floor

G) Fifth Floor

ITEM No. 63 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 64 :- Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per running metre, top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per running metre the shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre, Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per running metre and handle and top section 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre as per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete. With colour Anodising with box. (Material including all lead and lifts)

A) First Floor

B) Second Floor

C) Third Floor

ITEM No. 65 :- Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 millimetre thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kilogram ), G.I fasteners 100 x 8 millimetre size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two numebrs glazed & one number wire mesh panels) made of (big series) frame 116 x 45 millimetre & sash 46 X 62 millimetre both having wall thickness of 2.3 ± 0.2 millimetre and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 Square Metre). (Material including all lead and lifts)

A) Ground Floor

B) Fourth Floor

C) Fifth Floor

D) Terrace Floor

ITEM No. 66 :- Providing and fixing factory made uPVC white colour fixed glazed windows / ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 millimetre thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 millimetre size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetera, Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 millimetre & mullion 47 x 68 millimetre both having wall thickness of 1.9 ± 0.2 millimetre and single glazing bead of appropriate dimension. (Area upto 0.75 Square Metre.) (Material including all lead and lifts)

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 67 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I. S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

I) Terrace Floor

ITEM No. 68 :- Providing and applying fibre added elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in two coats @10 litre / 10 Square metre one coat of selfpriming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and second coat of undiluted elastomeric waterproofing liquid (dry film thickness of complete application / system not less than 200 microns). Followed by single coat of Silicacisous fiber reinforced 2 millimetre scratch finish Texture coat, to be top coated with two or more coats of Organo-Silicon, UV Cross linking emulsion Paint having high resistance to algae growth and Shade fading, Superior DPUR and protection against bird dropping with Paint performance of 10 years of approved manufacture and of approved colour to new plastered surface / Concrete surfaces including scaffolding, ff necessary, cleaning and preparing the surface, water for two days etcetre, complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

G) Terrace Floor

ITEM No. 69 :- Providing and fixing 45 centimetre wide mild steel ladder of 40millimetre X 6 millimetre mild steel flat stringers and steps of 18 millimetre diameter mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre and painting the ladder complete. (Anti Corossive Paint)

ITEM No. 70 :- Providing and fixing 900 millimetre high Stainless Steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and 8millimetre thick toughened glass including fabricating,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 71 :- Providing and fixing Braille indicators for handrails of the approved design and make having Braille dots raised 0.5 millimetre above base plate, to be installed at the specified locations as per the directions of the engineer in charge. (Material including all lead and lifts)

A) Basement 2

B) Basement 1

C) Ground Floor

D) First Floor

E) Second Floor

F) Third Floor

G) Fourth Floor

H) Fifth Floor

ITEM No. 72 :- Invisible Grills - Providing and Fixing invisible grills with aluminium track uses 316 marine grade stainless steel for the cables manufactured with 7 X 7 nano technology with 0.3 millimetre nylon coating; - Load Capacity - 250 Kgs / Plus Space - 1.5 inch No hot work / No Welding. (Material including all lead and lifts)

A) First Floor

B) Second Floor

C) Third Floor

D) Fourth Floor

E) Fifth Floor

ITEM No. 73 :- Providing and fixing mild steel grill gate with angle iron frame 65millimetre X 65millimetre X 10millimetre with iron bars at 150millimetre C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram per Square metre (Material including all lead and lifts)

ITEM No. 74 :- Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 millimetre diametre Galvanised Iron pipe ( Rezan/ concenti wire 0.75 millimetre diametre ) with hot dip and Galvanised iron coated hooks as per drawing supported on Mild Steel angle 50 X 50 X 6 millimetre at 2.5 metre centre to centre including fixing and fastening with wire, painting Mild Steel angles with one coat of red lead primer and two coat of oil paint etcetera complete. (Material including all lead and lifts)

ITEM No. 75 :- Design, supply, fabrication & erection of approved structural glazing using specially designed Vertical Mullion and Horizontal Transoms of Required size & as per architect's approved Grid work with aluminium rectangular sections to be fixed in masonary at interval of each floor on concrete slab with 80 millimetre X 100 millimetre X 5 millimetre thick galvanized M & Langle fixed on wall side with raw bolt size of 10 millimetre x 90 millimetre with necessary bolts & washers / nuts for the plumb the linelevels, the glass panel's shall be fixed on a specially designed architectural sub- frame using Dow Corning 995 strural sealant & GE Silicon (SSG - 4000) sub frame would be fixed on main frame grid in amanner that no aluminium frame is visible from outside & groovesbetween the glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made it air tight, water proof & dustfree thus giving it a flush look outside. Glass will be of 6 millimetre thick Glaverbel reflective type with heat strenghened toughened. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

F) Fifth Floor

G) Terrace Floor

ITEM No. 76 :- Providing and fixing glazing panels and doors using 12 millimetre thick toughen clear glass (confirming to ASTM Standards C-1048) supported by channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge, stainless steel articulated countersunk bolts threaded bolts, chemical fasterners, etcetera, glass panel size as per design and drawing including applying colourless sealant of joint including required edge polish, making glazing water tight etcetera. Destructive node joint test reports to be submitted for establishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etcetera, complete as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top. Hardware - Droma BTS 80 Floor Spring. (Material including all lead and lifts)

ITEM No. 77 :- Compacting the hard murum side widths including laying in layers on each side with Vibratory roller including artificial watering etcetera complete.

ITEM No. 78 :- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - Plant Mix Method and Grading - I Material.

ITEM No. 79 :- Wet Mix Macadam - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. (Material including all lead and lifts)

ITEM No. 80 :- Providing and laying White Topping as per IRC-SP 76-2015 over bituminous surface (Existing bituminous surface preparation to be done if necessary either by milling or levelling course with BM/DLC to correct surface profile and to be paid separately) with unreinforced M-40 grade Pavement Quality Concrete using Ordinary Portland Cement (OPC 43/OPC 53-Grade) at 357kg/cum and 105 kgs of Fly Ash (Replacement of Fly Ash to the extent of 15% and Fine aggregate by 10%) coarse aggregate, fine aggregate and Admixture confirming to IS 9130-1999 (R-2004) polymeric synthetic fibre as per ASTM (1116) such as polyester / polyethylene / polypropylene / Glass fibre at 1.20 kilogram per cubic metre, mixed in batching and mixing plant or weigh batcher as per approved mix design to achieve minimum flexural strength or modulus of rupture of concrete 4.50 MPa at 28 days limiting maximum water cement ratio to 0.40, transported to site, laid with mechanical paver finisher, spread, vibrated, compacted and finished in a continuous operation to the lines and grades as per drawing, texture finishing of surface, spraying two layers of curing compound, curing with water sprayed on hessian cloth covered over concrete surface, groove cutting grid 1 metre x 1 metre to a depth of 1/3 of the Thickness and of width 3-5 millimetre as per design including cost of all material, side form work, sealing joints labour and HOM of machineries etcetera complete as per specifications. (Material including all lead and lifts)

ITEM No. 81 :- Providing and casting in situ or precast tapering reinforced cement concrete M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125millimetre below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineer in charge. Using Concrete Batching and Mixing Plant (Material including all lead and lifts)

ITEM No. 82 :- Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 millimetre thickness of having a strength of 300 kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etcetera complete. (Material including all lead and lifts)

ITEM No. 83 :- Space - frame with Laminated Glass on Top of Atrium Space-frame with Laminated Glass on Top Design, Supply, Fabrication and Erection of Space-frame structure over atrium made up of tubular members, nodes, props, high tensile bolts, plates, sleeves etcetera duly painted with one coat of suitable primer and 2 coats of PU paint which shall be cladded with 13.52 millimetre thick clear laminated glass (6 millimetre thick clear toughened glass +1.52 millimetre thick PVB lamination + 6 millimetre thick clear toughened glass) with the help of necessary aluminum sections, epdm, screws etcetera as per above specifications. (Material including all lead and lifts).

ITEM No. 84 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etcetera complete. (Terrace Floor) (Material including all lead and lifts)

ITEM No. 85 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete. (Material including all lead and lifts)

ITEM No. 86 :- Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" designed as per accessibility standards and having 4 millimetre thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200 millimetre from FFL and as per the directions by the engineer in charge. (Material including all lead and lifts)

ITEM No. 87 :- Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system. (Material including all lead and lifts)

ITEM No. 88 :- Foundation Passive Rock Anchor : Drilling hole of 150 millimetre diametre in hard rock including all labour and Machinery as per design upto 8 metre Depth from Raft PCC level. Grouting by Conbextra Fosroc GP 2 as per design, Anchor capacity 75 T and as per direction of Engineer in Charge. (Material including all lead and lifts).

ITEM No. 89 :- Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 millimetre diametre UPVC flush pipe with fittings and clamps, 20 millimetre diamete UPVC overflow pipe, mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use). (Material including all lead and lifts)

ITEM No. 90 :- Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 millimetre diameter UPVC flush pipe with fittings and clamps,20 millimetre diameter UPVC overflow pipe, mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use.) (Material including all lead and lifts)

ITEM No. 91 :- Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

ITEM No. 92 :- Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (Material including all lead and lifts)

ITEM No. 93 :- Providing and fixing C. P. Two way BIB cock of approved make including necessary sockets / union nut etcetera complete. (Material including all lead and lifts)

ITEM No. 94 :- Providing and fixing Health Faucet with one metre long easy flex tube in chrome finish and wall flange. (Material including all lead and lifts)

ITEM No. 95 :- Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etcetera complete. (Material including all lead and lifts)

ITEM No. 96 :- Providing and fixing Coloured glazed with bottle trap earthenware Wash Hand Basin of 55 X 40 centimetre size including cold water pillar taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etcetera complete. (Material including all lead and lifts)

ITEM No. 97 :- Providing and fixing 40 X 50 centimetre size superior type Mirror with plastic frame. (Material including all lead and lifts).

ITEM No. 98 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 99 :- Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etcetera complete. (Material including all lead and lifts)

ITEM No. 100 :- Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 millimetre nominal bore. (Material including all lead and lifts)

ITEM No. 101 :- Providing and fixing C.P. model No. ALD-769 B Bottle trap (with internal partition) for Wash Basins including Waste Coupling fixed in required position with 250 millimetre long wall connection pipes and wall flange with all necessaryfittings and fixtures, etcetera complete and as directed by the Engineer in charge. (Material including all lead and lifts)

ITEM No. 102 :- Providing and fixing toilet paper holer : C.P. Brass (Material including all lead and lifts)

ITEM No. 103 :- Providing and fixing ISI marked make CP brass liquid soap dispensers with CP brass bracket capacity 250 ml. (Material including all lead and lifts)

ITEM No. 104 :- C. P.Soap dish hooker Jaquar make continental (Cat. No. AKB 35731). (Material including all lead and lifts)

ITEM No. 105 :- C.P.Towel rail 24 inches Jaquar make continental (Cat. No.ACN 1111N). (Material including all lead and lifts)

ITEM No. 106 :- Providing and fixing Single Lever High Flow Bath and Shower Mixer (Concealed Body) Wall Mounted Model with Button Spout (Composite One Piece Body) with CP brass screws and washers including drilling hole in walls with drill gun and making good the walls as per direction of Engineer in Charge. (Make : Hindware, Model No : Flora F280022 (3 in 1 system with provision of both hand shower and over head shower with 115 millimetre long bend pipe and Wall Flange or equivalent). (Material including all lead and lifts)

ITEM No. 107 :- Providing and fixing C.P. brass shower rose with 15 or 20 millimetre inlet : 150 millimeter diameter. (Material including all lead and lifts)

ITEM No. 108 :- Providing, fixing, testing and commissioning of Shower panel assembly of 1400 millimetre X 200 millimetre size including C.P. brass hot and cold water Diverter with spout, overhead shower with revolving joint pattern and concealed single lever diverter having built-in non return valves, CP wall flange with telephonic hand shower including connecting inlet and outlet to main piping, cutting and making good the walls etcetera complete and as per the technical specification and drawings. (Notes: a) Conditions mentioned in Item No.1 shall be applicable. b) Rate Quoted shall be inclusive of cost of cement, sand and other consumables like hacksaw blade etcetera) (Make : Hindaware, Model No : Amore 511691 or Equivalent). (Material including all lead and lifts)

ITEM No. 109 :- Providing, Fixing, testing and commissioning of 2 part wall to wall Shower enclosure of 2000 millimetre in Height and 1500 -2000 millimetre in width with one fixed glass and one sliding door, material of the enclosure shall be tempered Glass with CP brass screws and washers including drilling hole in walls with drill gun and making good the walls as per direction of Engineer in Charge. (Make : Hindware, Model No : Edge or Equivalent ). (Material including all lead and lifts)

ITEM No. 110 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 111 :- Providing and fixing on walls / ceiling / floor 20 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 112 :- Providing and fixing on walls / ceiling / floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 113 :- Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 114 :- Providing and fixing on walls/ ceiling/ floor 50 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete.

ITEM No. 115 :- Providing and making ISI Mark ferrule connection of 50 millimetre diameter to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

ITEM No. 116 :- Supplying and erecting cast iron double flange butterfly valve of size 50 millimetre diametre complete as per specification no. FF-VL/BFV.

ITEM No. 117 :- Supplying and erecting gun metal gate valve of size 20 millimetre diametre complete as per specification No.FF-VL/GV

ITEM No. 118 :- Supplying and erecting gun metal gate valve of size 25 millimetre diametre complete as per specification No.FF-VL/GV

ITEM No. 119 :- Supplying and erecting gun metal gate valve of size 32 millimetre diametre complete as per specification No.FF-VL/GV

ITEM No. 120 :- Supplying and erecting gun metal gate valve of size 50 millimetre diametre complete as per specification No.FF-VL/GV

ITEM No. 121 :- Supplying and erecting gun metal gate valve of size 15 millimetre diametre complete as per specification No.FF-VL/GV

ITEM No. 122 :- Supplying and erecting cast iron double flange NRV of size 100 millimetre diametre complete as per specification no. FF-VL/NRV

ITEM No. 123 :- Supplying and erecting 100 millimetre diametre end line strainer for positive suction complete as per specification No.FF-VL/ELS

ITEM No. 124 :- Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 25 millimetre diametre Pipes.

ITEM No. 125 :- Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 32 millimetre diametre Pipes.

ITEM No. 126 :- Providing and fixing white european type wall-hung, Size 360 millimetre x 360 millimetre x 575 millimetre with flush valve having flow rate up to 6.0 Litre per Minute of Jaquar/Cera/Hindware /Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100 millimetre diametre PVC plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera as directed by Engineer in charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer in charge.) (Material including all lead and lifts)

ITEM No. 127 :- Providing and fixing white european type Indian Orisa Pan, of with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100 millimetre diametre C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 128 :- Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 X 590 X 195 millimetre size with pillar cock, C.P. Angular stop cock, long thread of approved make continental including stainless steel bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black / Colour Granite of 180 millimetre thick fixed on Black Kadappa Framework etcetera complete as directed by Engineer in charge.

ITEM No. 129 :- Providing and fixing Table top white wash basin of size 120 X 635 X 405 millimetre rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to the outside face of the wall etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 130 :- Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 millimete diameter Poly Vinyl Chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 131 :- Providing and fixing of approved make white aquafree Waterless Urinal of with cartride size of 31.5 X 33 X 60centimetres including other necessary fittings etcetera complete. (Material including all lead and lifts)

ITEM No. 132 :- Providing and fixing Hand shower (health faucet) with 8 millimetre diametre 1 metre long flexible tube having wall hook with approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 133 :- Supplying and erecting storage type horizontal / vertical water heater 25 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection and as per specification. (Material including all lead and lifts)

ITEM No. 134 :- Providing fibre reinforced PVC flexible pipe upto 1 metre length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1set of 2 numbers) complete. (Material including all lead and lifts)

ITEM No. 135 :- Providing and fixing divertor with overhead shower, shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters / minutes of Jaquar / Cera / Hindware / Perryware or equivalent make including all necessary pipes, fittings excetra complete as directed by Engineer In Charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

ITEM No. 136 :- Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15millimetre diameter supply pipe including necessary bend and socket complete.

ITEM No. 137 :- Providing and fixing C.P. wall mixer with provision for overhead shower with 115 millimetre long bend pipe and wall flange jaquar or equivalent make continental (CAT. No.CON-273 UPR) including necessary sockets / union nut etcetera complete. (Material including all lead and lifts)

ITEM No. 138 :- Providing and fixing C.P.Toilet paper holder Jaquar make continental (Cat. No. AQ 7751 ) (Material including all lead and lifts)

ITEM No. 139 :- Providing and fixing C. P. soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 ) (Material including all lead and lifts)

ITEM No. 140 :- Providing and fixing C. P. Towel ring square jaquar make continental (Cat. No. ACN 1121N ) (Material including all lead and lifts)

ITEM No. 141 :- Providing and fixing C. P. Towel rail 24" jaquar make continental (Cat. No. ACN 1111N ) (Material including all lead and lifts)

ITEM No. 142 :- Providing and fixing C.P. Angular stop clock with wall flange of approved make including necessary sockets / union nut etcetera complete.

ITEM No. 143 :- Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 144 :- Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 145 :- Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 146 :- Providing and fixing Autoclosing pillar cock of pressmatic tap of Jaguar make or equivalent including all fixtures, fittings etcetera complete.

ITEM No. 147 :- Providing and fixing screw down for 25 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

ITEM No. 148 :- Providing and fixing screw down for 32 millimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete. (Material including all lead and lifts)

ITEM No. 149 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 160 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment)

ITEM No. 150 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes, all the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment). (Material including all lead and lifts)

ITEM No. 151 :- Providing and fixing 15 centimetre rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

ITEM No. 152 :- Supply, Installation and Testing of PVC SWR 75 millimtre diametre pipes (IS 13592) with fitting and required cop of minimum pressure rating of 6 Kilogram per cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip (O) ring and rubber lubricant for connection. (Material including all lead and lifts)

ITEM No. 153 :- Supply, Installation and Testing of PVC SWR 100 millimtre diametre pipes (IS 13592) with fitting and required cop of minimum pressure rating of 6 Kilogram per cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip (O) ring and rubber lubricant for connection. (Material including all lead and lifts)

ITEM No. 154 :- Supply, Installation and Testing of PVC SWR 150 millimtre diametre pipes (IS 13592) with fitting and required cop of minimum pressure rating of 6 Kilogram per cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip (O) ring and rubber lubricant for connection. (Material including all lead and lifts)

ITEM No. 155 :- Providing and laying cast iron pipes of B class of 150 millimetre diameter with sockets and spiget ends/ flanges and cast centrifugally/ vertically including specials, laying pipes and back filling the trench complete including excavation. (Material including all lead and lifts)

ITEM No. 156 :- Providing and making lead joints for 150millimetre diameter cast iron pipe line including lead and testing (Material including all lead and lifts)

ITEM No. 157 :- Providing and making flanged connection for the 150 millimetre diameter cast iron pipe line including painting rubber insertion, nuts and bolts etcetera complete. (Material including all lead and lifts)

ITEM No. 158 :- Providing and laying cast iron pipes of B class of 100 millimetre diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation. (Material including all lead and lifts)

ITEM No. 159 :- Providing and making lead joints for 100 millimetre diameter cast iron pipes line including lead and testing. (Material including all lead and lifts)

ITEM No. 160 :- Providing and making flanged connection for the 100 millimetre diameter cast iron pipe line including painting rubber insertion, nuts and bolts etcetera complete. (Material including all lead and lifts)

ITEM No. 161 :- Providing and laying cast iron pipes of B class of 80millimetre diameter with sockets and spigot ends/ flanges and cast centrifugally / vertically including specials, laying pipes and back filling the trench complete including excavation. (Material including all lead and lifts)

ITEM No. 162 :- Providing and making lead joints for 80 millimetre diameter cast iron pipe line including lead and testing. (Material including all lead and lifts)

ITEM No. 163 :- Providing and making flanged connection for the 80 millimetre diameter cast iron pipe line including painting rubber insertion, nuts and bolts etcetera complete. (Material including all lead and lifts)

ITEM No. 164 :- Supply, Installation, Testing and Commisioning of PVC Agri pipes 40 millimetre diametre Class – III (6 Kg/Cm2) (IS 4985) with all necessary fitting for connecting fo wash basin, bottle trap to multi floor trap connecting to be done by cement solvent solution and as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 165 :- Supply, Installation, Testing and Commisioning of PVC Agri pipes 50 millimetre diametre Class – IV (10 Kg/Cm2) (IS 4985) with all necessary fitting for connecting fo wash basin, bottle trap to multi floor trap connecting to be done by cement solvent solution and as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 166 :- Providing and fixing reinforced cement concrete cover of size 90 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Heavy duty (225 Kilgoram)

ITEM No. 167 :- Providing and fixing reinforced cement concrete cover of size 90 centimetre X 45 centimetre with frame over inspection chamber etcetera complete Medium duty (140 kilogram) (Material including all lead and lifts)

ITEM No. 168 :- Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Heavy duty (160 kilogram)

ITEM No. 169 :- Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Medium duty (100 Kilogram)

ITEM No. 170 :- Providing, constructing and fixing Supreme make or equivalent make Ultra 450 millimetre diameter Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 millimetre and height of 388 millimetre with 160 or 200 millimetre main inlet (s) outlet and 110 and / or 160 millimetre branch inlets, with 450 millimetre diameter Ultra shaft pipe of HDPE material having height of 460 millimetre, having reinforced cement concrete cover and frame fixing in 150 millimetre thick in c.c.1:2:4, having crushed sand bed of 150 millimetre thick of size 750 millimetre diameter Including excavation and refilling the sides of chamber by sand crushed cushioning 150 millimetre thickness, connecting all required UPVC fittings with rubber lubricant etcetera complete. (Material including all lead and lifts)

ITEM No. 171 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

ITEM No. 172 :- Providing and constructing Brick Masonry inspection trap Chamber 90 centimetre x 45 centimetre including 1:4:8 Cement concrete foundation, 1:2:4 Cement concrete channels / half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with reinforced cement concrete cover medium duty 140 kilogram etcetera complete.

ITEM No. 173 :- Rain Water Harvesting - Shallow Percolation Pit providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 metre diametre pre-cast RCC rings, 300 millimetre thick side filling around outside of RCC rings (annular space) with 40 millimetre size boulders including filling of percolation pit upto 0.50 metre depth (from bottom up) with 25-75 millimetre clean washed gravels followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera ) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) media layer including covering with RCC slab, manhole frame and cover, PVC rungs etcetre including arrangement for inlet and outlet pipe, excavation and backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. (Material including all lead and lifts)

ITEM No. 174 :- Providing and constructing Ductile Iron circular manhole 45 centimetre diametre at top 90 centimetre at bottom upto 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 centimetre thick burnt brick mansonry with 1:1 cement mortar plaster 25 millimetre thick inside and outside 20 millimetre (1:3) ductile iron heavy type cover with ring 25 Kilogram in weight, high strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etcetera as per requirement with prior approval of concerned Superitending Engineer. (Material including all lead and lifts)

ITEM No. 175 :- Providing and laying 100 millimetre dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

ITEM No. 176 :- Providing and laying concrete pipes of I.S.NP. class of 100millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

ITEM No. 177 :- Providing and laying concrete pipes of I.S.NP class of 150 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 178 :- Providing and laying concrete pipes of I.S.NP class of 225 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 179 :- Supply and installation of 600 millimetre Wide heavy duty FRP covers with required accessories & fittings. (Material including all lead and lifts)

ITEM No. 180 :- RWH - Recharge Pit Providing and constructing recharge pit of 2.0 metre deep and 1.0 metre diametre of pre-cast Reinforced cement concerete rings with 6.5" diametre X 25 metre deep borewell at the floor of recharge pit including installation of combination of solid / perforated PVC casing pipe wrapped around with netlon mesh including 300 millimetre thick side filling around outside of Reinforced cement concete rings (annular space) with 40 millimetre size boulders including filling of recharge pit upto 0.5 metre depth with 25-75 millimetre clean washed gravels from bottom up followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate ( natural sand / crushed sand VSI grade finely washed etcetera) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) media layer including covering with Reinforced cement concrete slab, manhole frame and cover, PVC rings, PVC end-caps, fittings etcetera including arrangement for inlet and outlet pipe excavation and back filling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. (Material including all lead and lifts)

ITEM No. 181 :- Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 centimetres (Consolidated thickness). (Material including all lead and lifts)

ITEM No. 182 :- Supplying on site well decomposed Farm Yard Manure for excavation area of depth of 30 centimeters (Consolidated thickness) (Consolidated thickness). (Material including all lead and lifts)

ITEM No. 184 :- Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 meters for a depth of 30 centimetres.

ITEM No. 185 :- Filling fresh garden soil / silt and manure in excavated area of depth 30 centimetres.

ITEM No. 186 :- Mixing garden soil / silt and manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etcetera complete for required depth 30 centimetre for planting lawn / shrub/ flower bed / hedges / edges / canna bed / ground cover. (1/10 of semiskilled labour).

TOTAL : I) Civil Work

II) Electrical Work

HT METERING KIOSK / TRANSFORMER / RMU / HT / LT PANELS

HT SUBSTATION

ITEM No. 188 :- Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 millimetre (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

ITEM No. 189 :- Supplying, erecting, testing and commissioning 11kV, 630A, 21kA/3sec, 3 way, outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 1 no. feeder with 1 LBS and 2 nos. feeder with 2 VCB. Compliant to IEC 62271 -100,200 and 102, as per specification.

ITEM No. 190 :- Supplying, installation, testing and commissioning 3 phase, 11/0.433 kV, 50 Hz., 1000 kVA, indoor type, vacuum cast coil (VCC) dry type cast resin transformer, Copper wound , Dyn11 vector group, delta/star connection with additional neutral brought out on load side, for indoor use continuous duty, average temp rise of winding (at Principal Tap) 115°C at ambient temp max 50°C and min -5°C at full load rating, with tapping (with off circuit tap links type tap changer) for off load +5 to - 5% @ 2.5% in +2/-2 steps, HV variation, class of insulation H/H, method of cooling AN, no load loss at rated voltage and frequency (+15% IS Tol) 2.20 KW, full load loss at rated current 9.25 kW, with 98.87 % efficiency at full load and 99.11 % at 1/2 full load, with 75 kV peak full wave lightning impulse withstand voltage with complete enclosure having IP 21 Degree of protection, cable box arrangement at HV side and bus duct at LV side ,with rating and diagram plate, base channel, earthing terminals and WTI scanner with PT-100 sensors, etcetera standard accessories complete with test certificate (as per IS:11171 and IS 2026) with necessary permissions of Electrical Inspector as per specification.

ITEM No. 191 :- Supplying, erecting ,Testing and commissioning Ceiling or wall Mounting type 1600A Capacity at 40oC ambient temperature Sandwich type Aluminium Conductor tin plated at joints /Aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% with suitable for (3L+ N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54/55 Protection, 65/80KA short circuit rating for 1sec, ,Insulation Class F (155 C) ,casing made of minimum 1.5millimetre hot / electro Galvanized /Epoxy powder coated steel sheet enclosure with required shade of paint having Mechanical strength certification up to IK10 ,overall cross sectional area not more than 0.0280 sq. Mtr., complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories as per site requirement with Horizontal / Vertical G.I. Support at required interval with External Double run 50 x 5 millimetre Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification

ITEM No. 192 :- Supplying, installing and Commissioning Vertical or Horizontal 90 Degree Elbow for Sandwich type Aluminium Compact sus trunking/ rising mains of capacity 1600A, 3 Phase 4 Wire 415 V, 50 Hz AC Supply Made of minimum 1.5millimetre Thick Galvanised sheet metal enclosure (IP54/55) duly powder coated with all necessary accessories complete

ITEM No. 193 :- Supplying, installing, testing and commissioning of Flange end with Adaptor box, as per site requirement suitable for 1600A 3 phase 4 wire 415V, 50 Hz A.C, 65/80kA short circuit rating for 1 sec Sandwich type Aluminium BBT. with necessary accessories complete confirming to IEC 61439-6 as per specification

LT PANELS-MLTP- NON CRITICAL,CRITICAL

ITEM No. 194 :- Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical and RS 232 port, backlit LCD, measure and display trivector energy, load survey, TOD, tamper detection and logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment and test certificate from manufacturer erected on provided M.S. box and connected to CTs.

ITEM No. 195 :- Supplying, installation and marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification)

ITEM No. 196 :- Supplying, installation and marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification (FOR ALL SUB PANELS)

ITEM No. 197 :- Supplying and erecting 200 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP /APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification.

ITEM No. 198 :- Supplying and erecting 250 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification.

ITEM No. 199 :- Supplying, installing, testing and commissioning air circuit breaker , Electrical-drawout type, 650V, 1600A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA, (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification.

ITEM No. 200 :- Supplying and erecting ON LOAD four pole automatic transfer switch, 415V,1600A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .

ITEM No. 201 :- Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 202 :- Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosu+E33:E35re/panel as per specification.

ITEM No. 203 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 204 :- Providing and erecting 4 Pole MCCB, 415V, 800A, rated short-circuit breaking capacity 50 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 205 :- Providing and erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 206 :- Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 207 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 208 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 209 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 210 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 211 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 212 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 213 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 214 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 216 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

ALTERNATE METER PANEL

ITEM No. 217 :- Supplying, installing, testing and commissioning air circuit breaker ,ELECTRICAL-drawout type, 650V, 630A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification. (15% Rise for Draw out)

ITEM No. 218 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 219 :- Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 220 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 221 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 222 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 223 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 224 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 226 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

FIRE FIGHTING CHANGEOVER PANEL

ITEM No. 227 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 228 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 315- 320A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3.(35%Rise as per note)

ITEM No. 229 :- Providing and erecting 4Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 230 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 231 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification

ITEM No. 232 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 233 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40millimetre (Width) X 5 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 234 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 235 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 236 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 238 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

BASEMENT VENTILATION PANEL

ITEM No. 239 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 315- 320A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3.

ITEM No. 240 :- Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 241 :- Providing and erecting 4Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 242 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 243 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 244 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 245 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40millimetre (Width) X 5 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 246 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 247 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 248 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 250 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

LIFT PANEL

ITEM No. 251 :- Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 252 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 253 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 254 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40millimetre (Width) X 5 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 255 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 256 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 257 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 259 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

ITEM No. 260 :- Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

TYPICAL FLOOR PANEL

ITEM No. 261 :- Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 262 :- Supplying, erecting and marking FPMCB 6A-32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 263 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 264 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 265 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40millimetre (Width) X 5 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 266 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 267 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 268 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 270 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

HVAC ODU PANEL-TERRACE

ITEM No. 271 :- Supplying, installing, testing and commissioning air circuit breaker manual fixed type, drawout type, 650V, 1000A rated at 50º C without deration, 12kV Impulse, 4 Pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification.

ITEM No. 272 :- Supplying, installing, testing and commissioning air circuit breaker manual fixed type, ELEdrawout type, 650V, 800A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification.

ITEM No. 273 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 274 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 275 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification

ITEM No. 276 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 277 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 278 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 280 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

UPS OUTGOING PANEL

ITEM No. 281 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification

ITEM No. 282 :- Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 283 :- Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 315A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6.

ITEM No. 284 :- Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 285 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 286 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 287 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 288 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 289 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 290 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 291 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 293 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

CRITICAL EMERGENCY LIGHTING PANEL

ITEM No. 294 :- Supplying, installing, testing and commissioning air circuit breaker manual fixed type, Electrical-drawout type, 650V, 630A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification.

ITEM No. 295 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 296 :- Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 297 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 298 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 299 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 300 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 301 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera.

ITEM No. 302 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera.

ITEM No. 304 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

COMMON AREA SERVICE PANEL

ITEM No. 305 :- Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 306 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 307 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 308 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50millimetre (Width) X 10 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 309 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification

ITEM No. 310 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 311 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 313 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

COMMON AREA UPS EMERGENCY LIGHTING

ITEM No. 314 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 315 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 316 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15millimetre (Width) X 3 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 317 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 318 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 319 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 321 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

COMMON AREA UPS PANEL

ITEM No. 322 :- Providing and erecting 4 Pole MCCB, 415 V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

ITEM No. 323 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 324 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 325 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25millimetre (Width) X 5 millimetre (Thickness) , with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

ITEM No. 326 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 327 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 328 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 330 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

DG SET, AMF and SYNCHRONIZING PANEL

ITEM No. 331 :- Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 81.90 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 690 Ltr etcetera on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification.

ITEM No. 332 :- Supplying, installing, testing and commissioning air circuit breaker manual fixed type, drawout type, 650V, 800A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection and with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification (15% Rise as per note)

ITEM No. 333 :- Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 400 kVA up to 500 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification.

ITEM No. 334 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A having 100millimetre (Width) X 5 millimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade and Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification

ITEM No. 335 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 336 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 337 :- Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring and connections etcetera

ITEM No. 339 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

ITEM No. 340 :- Lighting, Raw. UPS, Emergency Lighting Distribution Boards

ITEM No. 341 :- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2millimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

ITEM No. 342 :- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2millimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

ITEM No. 343 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2millimetre thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

ITEM No. 344 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2 millimetre thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification.

ITEM No. 345 :- Supplying and erecting triple pole mini feeder pillar with 500V, 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation complete as per specification.

ITEM No. 346 :- Supplying, erecting and marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 347 :- Supplying, erecting and commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 348 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 349 :- Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 350 :- Supplying, erecting and commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 351 :- Supplying, erecting and commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 352 :- Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 353 :- Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

POINT WIRING

ITEM No. 354 :- Point wiring for light/bell concealed type in min 20 millimetre FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 355 :- Point wiring for ceiling fan concealed type in min 20 millimetre FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 356 :- Point wiring for independent plug, concealed type in min 20 millimetre FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 357 :- Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm. earth wire in provided concealed pipes for concealed type light/bell point wiring and terminating on modular accessories in box for point wiring for light/fan/bell as per specification.

ITEM No. 358 :- Supplying and erecting mains with 3x2.5 sq.mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification

ITEM No. 359 :- Supplying and erecting mains with 3x4 sq.mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification

ITEM No. 360 :- Supplying and erecting mains with 3x6 sq.mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification

ITEM No. 361 :- Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 millimetre PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch.

ITEM No. 362 :- Secondary point wiring for additional light/ bell point, concealed type in min 20 millimetre FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification.

ITEM No. 363 :- Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete.

ITEM No. 364 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 365 :- Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

ITEM No. 366 :- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 367 :- Supplying and erecting mains with 3x2.5 sq.mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole / Bus bars or any other places as per specification.

ITEM No. 368 :- Supplying and erecting HMS PVC conduit FRLS grade 20 millimetre dia. with necessary accessories in wall/floor with chiselling appropriately as per specification

ITEM No. 369 :- Supplying and erecting mains with 3x4 sq.mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

ITEM No. 370 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background

ITEM No. 371 :- Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 372 :- Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification.

ITEM No. 373 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 374 :- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 375 :- Supplying and erecting modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.

ITEM No. 376 :- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 377 :- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 378 :- Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 379 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 380 :- Supplying and erecting modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 381 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

LIGHT / FAN /WATER HEATER

LIGHT FIXTURES

ITEM No. 382 :- Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 383 :- Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 384 :- Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

ITEM No. 385 :- Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 386 :- Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 387 :- Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 388 :- Supplying and erecting integrated LED street light fitting 85-90W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

ITEM No. 389 :- Supplying and erecting integrated LED Post Top 45W IP65 and IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification

ITEM No. 390 :- Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty.

ITEM No. 391 :- Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800millimetre 8W IP65 and IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification.

ITEM No. 392 :- Supplying and erecting Street light bracket for erection of Single fitting made from 40 millimetera diametre ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 millimetre length 100 millimetre dia duly welded as per specification

ITEM No. 393 :- Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 millimetre A/F, top 70 millimetre A/F on provided foundation as per specification.

ITEM No. 394 :- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

ITEM No. 395 :- Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

ITEM No. 396 :- Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.

ITEM No. 397 :- Supplying and erecting LED Panel Light(600millimetre X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty

Ceiling Fan/Exhaust Fan

ITEM No. 398 :- Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification.

ITEM No. 399 :- Exhaust Fan (2.10.14) Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body and blades, wire mesh, duly erected, complete.

ITEM No. 400 :- Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 401 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 402 :- Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. millimetre copper PVC wire

ITEM No. 403 :- Supplying and erecting fan hook box of 10 millimetre M.S. round bar bounded to the R.C.C. bars upto 50 millimetre length each side and pierced through a 16 S.W.G. thick aluminium / M.S. Bowl 100 millimetre diametre or equivalent square size and having depth upto 75 millimetre complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Water Heater

ITEM No. 404 :- Supplying and erecting midget type 3.0 litres instant type water heater of rustproof and shockproof ABS plastic body, high grade SS inner tank and 3kW heating element with corrosion and hard water protection, with minimum 3 safety protections (i.e. thermostat and thermal cut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250V, 50Hz, A.C. supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete.

ITEM No. 405 :- Supplying and erecting Aviation obstruction light consisting of yellow painted diecast aluminium alloy housing with Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.

EARTHING

ITEM No. 406 :- Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing and recording the results as per specification.

ITEM No. 407 :- Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 408 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 409 :- Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

ITEM No. 410 :- Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete.

ITEM No. 411 :- Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 millimetre dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

LT Cabling-HFFR XLPE

ITEM No. 412 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

ITEM No. 413 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification

ITEM No. 414 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

ITEM No. 415 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification

ITEM No. 416 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

ITEM No. 417 :- Supplying, erecting and terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

ITEM No. 418 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

ITEM No. 419 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

ITEM No. 420 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

CABLE TRAY

ITEM No. 421 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 millimetre thick) GI sheet of 300 millimetre width and 100 millimetre height comprising all required standard accessories.

ITEM No. 422 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 millimetre thick) GI sheet of 500 millimetre width and 100 millimetre height comprising all required standard accessories.

ITEM No. 423 :- Providing and erecting hot dipped galvanised perforated type Cable tray manufactured from 18 SWG (1.2 millimetre thick) GI sheet of 300 millimetre width and 20 millimetre height complete with necessary hardware.

ITEM No. 424 :- Providing and erecting hot dipped galvanised perforated type Cable tray manufactured from 18 SWG (1.2 millimetre thick) GI sheet of 500 millimetre width and 20 millimetre height complete with necessary hardware

HT CABLES and TERMINATIONS

ITEM No. 425 :- Supplying , erecting and terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification.

ITEM No. 426 :- Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification.

ITEM No. 427 :- Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification.

ITEM No. 428 :- Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification.

UPS FOR OT, COMMAND CENTER and EMERGENCY LIGHTING

ITEM No. 429 :- Supplying, erecting, testing and commissioning of 60kVA capacity online pure sine wave, with backup time of .1/2...... hrs. PWM and IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections and Isolation Transformer as per specification.

ITEM No. 430 :- Supplying, erecting, testing and commissioning of 160kVA capacity online pure sine wave, with backup time of 1/2....... hrs. PWM and IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification.

ITEM No. 431 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

ITEM No. 432 :- Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

PUMPS and ACCESSORIES

ITEM No. 433 :- Supplying and erecting minimum Three and above star rated submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 57 to 22 m and discharge from 120 to 900 litres. . per minute and pipe of Suction 75 mm/Delivery 65 millimetre diameter erected with necessary H type clamps as per specification.

ITEM No. 434 :- Supplying and erecting minimum Three and above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute and pipe of Suction 65millimetre /Delivery 50 millimetre diameter erected with necessary H type clamps as per specification.

ITEM No. 435 :- Supplying and erecting minimum Three and above star rated 1 phase, 230 V, 50 Hz, submersible pump set of 1.5 KW/2HP suitable for erection on open well, pump having delivery head from 29 to 7 m and discharge from 30 to 600 litres. . per minute and pipe of Suction 50 mm/Delivery 50 millimetre diameter erected with necessary H type clamps as per specification.

ITEM No. 436 :- Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera.

ITEM No. 437 :- Supplying and erecting D.O.L Starter suitable for 250 V, Single phase 50 cycles with overload element with necessary materials and connected to supply up to 3 H.P

ITEM No. 438 :- Supplying and erecting Water level controller 230/415 V, A.C. , Four way under ground and Over head tank operation only.

ITEM No. 439 :- Supplying and erecting PVC coated 5 millimetre dia. Brass sensor/ electrode duly wired with nuts and bolts complete (Set of 3 Nos)

ITEM No. 440 :- Supplying and erecting flat flexible 3 core 6 sq.mm. PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

ITEM No. 441 :- Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification.

ITEM No. 442 :- Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail and filter change indication system .(for TDS more than 200

SAFETY ACCESSORIES

ITEM No. 443 :- Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 millimetre thickness up to 3.3 kV

ITEM No. 444 :- Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etcetera (All above contents shall be of standard makes)

ITEM No. 445 :- Providing printed instruction chart for treating persons suffering from electric shock, printed in English and Marathi and duly laminated complete.

ITEM No. 446 :- Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete

ITEM No. 447 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete

ITEM No. 448 :- Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface and LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over and under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5millimetre duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification.

ITEM No. 449 :- Supply, Installation, Testing and Commissioning 7.2 kW AC Electric Vehicle charger (suitable for 4 wheeler) having minimum IK08 and IP54 protection suitable for single phase, 230V AC, 50Hz, incoming and 1 nos. output having capacity of output current of 32A at 230V with Type two connector as per IEC 62196-2 , Interlocking arrangement and minimum 5 meter charging cable length, 3.5" TFT screen for human interface and LED light for status indication and metering for measurement of consumed energy having metering accuracy +/- 1%, one hour battery backup for server communication, emergency push stop button, with user interface by mobile application / QR Code/RIFD Card/Password Login and having short circuit, over and under voltage, overload, earth leakage ,Over temperature, surge protection and enclosure made of minimum 1.5millimetre duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification

TELEPHONE SYSTEM

ITEM No. 450 :- Supplying and installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

ITEM No. 451 :- Add Rs. 38159.00 for additional 16 extension card for digital (hybrid) type EPABX

ITEM No. 452 :- Supplying, erecting and commissioning MDF Box 150x150 pairs made from min. 1.5 millimetre thick MS sheet as per specification

ITEM No. 453 :- Supplying, installing, testing and commissioning push button telephone instrument desk top/wall mount with caller ID and Speaker unit as per specification complete.

ITEM No. 454 :- Supplying and erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification.

ITEM No. 455 :- Supplying, erecting and commissioning 10 pair module for connection and disconnection of telephone cable as per specification

ITEM No. 456 :- Supplying, erecting and commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification.

ITEM No. 457 :- Supplying and erecting 50 pair, 0.5millimetre dia, jelly filled unarmoured telephone copper cable with poly-al laminate moisture barrier, laid in provided PVC casing capping/conduit as per specification.

ITEM No. 458 :- Supplying and erecting 4 pair telephone copper cable 0.5 millimetre diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification.

NETWORKING SYSTEM

ITEM No. 459 :- Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification.

ITEM No. 460 :- Supplying and fixing 24 U floor mount rack (Dimension-DxWxH – 800x600x1265 mm) as per specification.

ITEM No. 461 :- Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification

ITEM No. 462 :- Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.

ITEM No. 463 :- Supplying and fixing 1 m UTP patch cord of cat 6 type in position as per specification

ITEM No. 464 :- Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification.

ITEM No. 465 :- Supplying and installing cat-6 cable suitable for networking as per specification

For Rest Room Internet Point and telephone point

ITEM No. 466 :- Supplying and erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification

For TV Point

ITEM No. 467 :- Supplying and laying HMS PVC conduit FRLS grade 20 millimetre dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification.

For DATA, TEL, TV Point

ITEM No. 468 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimetre dia. with necessary accessories in wall/floor with chiselling appropriately as per specification.

ITEM No. 469 :- Supplying and laying HMS PVC conduit FRLS grade 32millimetre dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification

ITEM No. 470 :- Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 millimetre thick) GI sheet of 400 millimetre width and 20 millimetre height complete with necessary hardware.

ITEM No. 471 :- Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 millimetre thick) GI sheet of 300 millimetre width and 20 millimetre height complete with necessary hardware.

CCTV (IP) SYSTEM

ITEM No. 472 :- Supply, Installation Testing of the following equipment for IP based CCTV System : Supplying and erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 millimetre Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD / SDHC / SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.

ITEM No. 473 :- Supplying and erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 millimetre Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR) / Color / Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.

ITEM No. 474 :- Supplying and erecting of High definition 2 Megapixel IP IR PTZ Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution: minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate : minimum 30 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant. Auto Tracking, Pre-set Tour Settings, Pan : 360° endless, Tilt : From -15° to 90° (auto-flip 180°) , minimum Pan Speed - from 0.1°/s to 160°/s, minimum Preset Speed: 240°/s, minimum Tilt Speed- from 0.1°/s to 120°/s, minimum Preset Speed: 200°/s, Min Presets - 250, minimum IR distance : 100 m, Lens Type : minimum 4.3 - 125millimetre Lens min 16 x digital zoom, min 30 x optical Zoom, Focus Mode : Auto / Zooming / One Push Manual, Lux sensitivity : minimum 0.2 Lux at color, minimum 0.05 Lux at Black and White, 0.0 Lux (IR), Night Vision Distance minimum IR- 100m, Power Supply : support 12/24 VDC, 24 VAC and PoE, IP67/IP66, IK10, built in micro SD/SDHC/SDXC card slot, minimum 256 GB, built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day / Night-Auto (ICR)/Color/Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.

ITEM No. 475 :- Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification.

ITEM No. 476 :- Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification.

ITEM No. 477 :- Supplying and erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification.

ITEM No. 478 :- Supplying, installing, testing and commissioning of 32/40 Ch Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI1/VGA1 outputs, provided Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920x1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA ports, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-adaptive Ethernet interface, support multibrand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer. support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etcetera complete as per specifications

ITEM No. 479 :- Supplying and erecting 65" professional LED display with 1920 *1080 (Full HD) Display, suitable for 64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etcetera complete as per specifications.

CABLES and ACCESSORIES FOR CCTV SYSTEMS

ITEM No. 480 :- Supplying and installing enhanced cat-6 cable with 4-connector channel, performance test report as per ANSI/TIA-568.2-D suitable for networking complete as per specification.

ITEM No. 481 :- Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification.

ITEM No. 482 :- Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM4) suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification

ITEM No. 483 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification

ITEM No. 484 :- Supplying and laying (including excavation of suitable width and depth up to 90 cm) 50 millimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

ITEM No. 485 :- Supplying and fixing 24 U floor mount rack (Dimension-DxWxH – 800x600x1265 mm) as per specification

ITEM No. 486 :- Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 millimetre A/F, top 70 millimetre A/F on provided foundation as per specification

ITEM No. 487 :- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

FIRE ALARM SYSTEM

ITEM No. 488 :- Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etcetera conforming to IS 15908:2021, IS 2189: 2008, EN 54 and VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty.

ITEM No. 489 :- Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 millimetre conforming to EN 54 or UL approved with 3 years equipment replacement warranty.

ITEM No. 490 :- Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty.

ITEM No. 491 :- Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etcetera with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards

ITEM No. 492 :- Supplying, installing, testing and commissioning of intelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for high heat type detectors, in built isolation mode, suitable for industrial/ kitchen/ boiler room etcetera with 3 years equipment replacement warranty, IS : 2175-1988 reaffirmed 2000, IS 15908:2021 standards

ITEM No. 493 :- Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification.

ITEM No. 494 :- Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty

ITEM No. 495 :- Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty

ITEM No. 496 :- Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed

ITEM No. 497 :- Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

ITEM No. 498 :- Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

ITEM No. 499 :- SITC of UL/ULC/FM listed Flush-mount telephone jack compatible with pluggable fire-fighter's telephone handset to facilitate two-way communication

ITEM No. 500 :- SITC of UL/ULC/FM listed pluggable fire-fighter's telephone handset with push-to-talk capability for two-way communication.

ITEM No. 501 :- Supplying, installing, testing and commissioning XL-FRLS armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification.

PUBLIC ADDRESS SYSTEM

ITEM No. 502 :- Supply, installation, testing and commissioning of Network Controller, EN-54 Certified digital EVAC controller capable of adding minimum of 12 zones and expandable upto 400 zones using additional routers - capable of adding 24 zones in the system,can support 2000 watt amplifier, 10 Nos. external routers and 20 Nos.1000 watt amplifiers, The voice alarm controller should be able to connect directly over Ethernet. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, software dependent solutions shall not be accepted.The network controllers will be integrated using an interface module which is able to send and receive Dante audio to and from other Controllers.The transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency shall be possible.Ethernet connectors (Primary /Secondary)100/1000 Mbit/s, RJ-45,iController should have functions like the audio playing, zone control, fault monitoring, speaker line monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions:100 Priorities, Time schedule broadcasts, Its own PTT microphone, Capable of amplifier redundancy. 10 trigger inputs and 13 trigger outputs, Full DSP functionality. 8 audio inputs, 4 audio outputs. Network Controller

ITEM No. 504 :- Supplying, erecting, testing and commissioning 480 W high efficiency amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification.

ITEM No. 505 :- Supplying, Installation, testing and Commissioning of 6W ceiling mount speaker with excellent speech and music reproduction - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5/0.75W - Effective frequency range(-10 dB) :90 Hz to 20KHz - SPL at rated power (1Khz at 1 m) 98 dB BS 5839‑8 /*

ITEM No. 506 :- Supplying, installing, testing and commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V and 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification.

ITEM No. 507 :- Supply and Fixing of Volume control Switches for offices and cabin areas (Considering 12W Volume Control)

ITEM No. 508 :- Supplying, installing, testing and commissioning XL-FRLS armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification

ITEM No. 509 :- Providing and erecting hot dipped galvanised perforated type Cable tray manufactured from 18 SWG (1.2 millimetre thick) GI sheet of 150 millimetre width and 20 millimetre height complete with necessary hardware.

ITEM No. 510 :- Supplying and fixing 24 U floor mount rack (Dimension-DxWxH – 800x600x1265 mm) as per specification

ITEM No. 511 :- Supplying, Installation, testing and Commissioning of Back box for speaker.

ITEM No. 512 :- Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 140 to 120 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 93kW or of suitable kW capacity for manual/automatic operation and consisting of following

Main Fire pump Basement

ITEM No. 513 :- Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 140 to 110 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 15 kW or of suitable kW capacity for manual/automatic operation and consisting of following

Main Fire Jocky pump Basement

ITEM No. 514 :- Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification

ITEM No. 515 :- Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 millimetre thick glass wool with 1.0 millimetre thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etcetera as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification

ITEM No. 516 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 25 millimetre dia with necessary fittings complete as per specification.

For Fire fighting sprinkler lines

ITEM No. 517 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 50 millimetre dia with necessary fittings complete as per specification

ITEM No. 518 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 65 millimetre dia with necessary fittings complete as per specification

ITEM No. 519 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 75/80 millimetre dia with necessary fittings complete as per specification

ITEM No. 520 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 100 millimetre dia with necessary fittings complete as per specification.

ITEM No. 521 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 150 millimetre dia with necessary fittings complete as per specification no.

Riser

ITEM No. 522 :- Supplying and erecting G.I. pipe above ground of C class ERW of size 200 millimetre dia with necessary fittings complete as per specification

ITEM No. 523 :- Providing coating of bitumen paint and 4millimetre thick wrapping for underground 150 millimetre ring main of fire fighting system.

Gr Main Ring

ITEM No. 524 :- Supplying and erecting 100 millimetre dia end line strainer for positive suction complete as per specification.

ITEM No. 525 :- Supplying and erecting 200 millimetre dia end line strainer for positive suction complete as per specification.

ITEM No. 526 :- Supplying and erecting cast iron double flange butterfly valve of size 50 millimetre dia. complete as per specification.

ITEM No. 527 :- Supplying and erecting cast iron double flange butterfly valve of size 65 millimetre dia. complete as per specification.

ITEM No. 528 :- Supplying and erecting cast iron double flange butterfly valve of size 75/80 millimetre diametre complete as per specification.

ITEM No. 529 :- Supplying and erecting cast iron double flange butterfly valve of size 100 millimetre dia. complete as per specification.

ITEM No. 530 :- Supplying and erecting cast iron double flange butterfly valve of size 150 millimetre dia. complete as per specification.

ITEM No. 531 :- Supplying and erecting cast iron double flange butterfly valve of size 200 millimetre dia. complete as per specification

ITEM No. 532 :- Supplying and erecting cast iron double flange ball type NRV of size 75/80 millimetre dia complete as per specification

ITEM No. 533 :- Supplying and erecting cast iron double flange ball type NRV of size 150 millimetre dia complete as per specification

ITEM No. 534 :- Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification

ITEM No. 535 :- Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63 millimetre dia, 15m in length, fitted with necessary accessories complete as per specification

ITEM No. 536 :- Supplying and installing wall mounting swinging Hose reel drum fitted with 19 millimetre dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification.

ITEM No. 537 :- Supplying and erecting gun metal chrome plated nozzle, 19 millimetre dia complete as per specification

ITEM No. 538 :- Supplying and erecting fire brigade header of 150 millimetre dia, for supplying water in fire tank complete as per specification

ITEM No. 539 :- Supplying and erecting fire brigade header (Siamese connection) of 150 millimetre dia for supplying water to wet riser system complete as per specification

ITEM No. 540 :- Supplying and installing air vessel of 300 millimetre dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification.

ITEM No. 541 :- Supplying and erecting 20/25 millimetre dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification

ITEM No. 542 :- Supplying and installing pressure gauge of 100 millimetre dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 millimetre dia. pad cock valve, and G.I. pipe, elbow etcetera complete as per specification.

ITEM No. 543 :- Supplying and installing pressure switch with 12/15 millimetre dia isolation valve, G.I. nipple, elbow, etc complete as per specification.

ITEM No. 544 :- Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 millimetre outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification

ITEM No. 545 :- Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etcetera duly painted in post box red colour.

ITEM No. 546 :- Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etcetera duly painted in post box red colour.

ITEM No. 547 :- Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etcetera duly painted in post box red colour.

ITEM No. 548 :- Supplying, erecting, testing and commissioning of 15 millimetre (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification.

ITEM No. 549 :- Supplying, erecting, testing and commissioning vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 75/80 millimetre dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

ITEM No. 550 :- Supplying, erecting, testing and commissioning vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 millimetre dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

ITEM No. 551 :- Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles (Except hollow core conductors). The residual openings shall be closed with filler, as per specification

ITEM No. 552 :- Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

ITEM No. 553 :- Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut and bolts grouted in wall complete.

ITEM No. 554 :- Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

ITEM No. 555 :- Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500millimetre in length, 900millimetre in height frame made out of 30x30x4 millimetre angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

ITEM No. 556 :- Supplying and erecting wall hook 225millimetre projection for keeping fire buckets made out of 15 millimetre dia. M.S. Rod grouted in wall to a depth of minimum 15cms complete.

ITEM No. 557 :- Supplying, erecting and terminating HFFR armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification

ITEM No. 558 :- Supplying, erecting and terminating HFFR armoured cable 3 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

ITEM No. 559 :- Supply, Installation, Testing and Commisioning of standard response standard coverage sprinkler head with quartz bulb and set to operate at 68°C. wherever required and all accessories, supports and painting etcetera (Side wall Type)

ITEM No. 560 :- Supply and Fixing of rossette plate for pendant type Sprinkler

ITEM No. 561 :- Supplying, erecting, testing and commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 millimetre thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etcetera complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring and cabling along with allied accessories with following incoming and outgoings, suitable for automatic and manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 93kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features and switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters and outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etcetera 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

ITEM No. 562 :- Supplying, erecting, testing and commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 millimetre thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etcetera complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring and cabling along with allied accessories with following incoming and outgoings, suitable for automatic and manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. booster pump 7.5 kw capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features and switchgears : 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters and outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etcetera 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

ITEM No. 563 :- Supply and Installation of Self Glowing nonreflective Type Sinages, made of 1.2 millimetre thick Rigid Plastic for Indoor / Outdoor Aplication with Green Background and white Text in satin finish. Text should be in portrait oreintation and Fixing of Sinages should be Permanent self adhesive type manifesting following Text as given below. Manual Call Point (MCP)- 9" x 9"

ITEM No. 564 :- Supply and Installation of Self Glowing nonreflective Type Sinages, made of 1.2 millimetre thick Rigid Plastic for Indoor / Outdoor Aplication with Green Background and white Text in satin finish. Text should be in portrait oreintation and Fixing of Sinages should be Permanent self adhesive type manifesting following Text as given below. Fire Exit -12"x 6"

ITEM No. 565 :- Supply and Installation of Self Glowing nonreflective Type Sinages, made of 1.2 millimetre thick Rigid Plastic for Indoor / Outdoor Aplication with Green Background and white Text in satin finish. Text should be in portrait oreintation and Fixing of Sinages should be Permanent self adhesive type manifesting following Text as given below. Fire Extinguisher-9" x 9"

ITEM No. 566 :- Supply and Installation of Self Glowing nonreflective Type Sinages, made of 1.2 millimetre thick Rigid Plastic for Indoor / Outdoor Aplication with Green Background and white Text in satin finish. Text should be in portrait oreintation and Fixing of Sinages should be Permanent self adhesive type manifesting following Text as given below. Fire Pump Room-38"x38"

ITEM No. 567 :- Non CSR (99-9-2) Supplying and Installing auto Glow (Viewing upto 15 Mtr. Length) fire signages Viz fire Hydrant, fire Extinguishers, fire Exist, fire Door, fire Hose Box, fire and Electrical safety

ITEM No. 568 :- SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity :- 20 Passenger/1360Kg · Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 1100/1200 millimetre wide x 2000 millimetre high · Clear Car size of .....millimetre wide x ......millimetre deep x 2250millimetre high · Lift shaft available having clear size of 3500......millimetre wide x 3000 ...... millimetre deep, ......millimetre Pit depth, ………millimetre Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid (non-cladded) sheet of 1.5 millimetre thick in hairline finish for car and all landing doors with SS door architraves / frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower / fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etcetera The lift car interior design shall be done as per the directions of engineer in charge. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC/ground floor· . LOP with SS face plate having recess / surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings.· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etcetera various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open / close operation from COP etcetera The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor/control card and allied accessories control panel having enclosure of 1.5millimetre CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR/inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer in Charge.

ITEM No. 569 :- SITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication / control / data cabling laying in rigid PVC conduits / trunking etcetera complete.

ITEM No. 570 :- B· Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 900/1000 millimetre wide x 2000 millimetre high · Clear Car size of ......millimetre wide x ......millimetre deep x 2250millimetre high · Lift shaft available having clear size of ......millimetre wide x ......millimetre deep, ......millimetre Pit depth, ………millimetre Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5millimetre thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etcetera The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC/ground floor. ·LOP with SS face plate having recess/surface push button box for all

landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings.

Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etcetera, various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open / close operation from COP etcetera The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor/control card and allied accessories control panel having enclosure of 1.5millimetre CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR/inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size and strength.

Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etcetera erected with necessary steel work. Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails, providing and fixing steel girders / RCC work having adequate strength for mounting and hoisting lift machine etcetera complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

AIR CONDITIONING WORK

HIGH SIDE WORK

ITEM No. 571 :- Supplying, erecting, testing and commissioning of 24HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required / suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 572 :- Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 573 :- Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 574 :- Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance

(COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 575 :- Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required / suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 576 :- Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required / suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 577 :- Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter / digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

ITEM No. 578 :- Supplying, erecting, testing and commissioning of 6HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required /suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter / digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etcetera all housed in powder coated weather proof cabinet complete.

A) 4500 CFM/15TR/7.5KW HEATER / UVGI / 125MILLIMETRE TSP

B) 3000 CFM/9.5TR/4KW HEATER / UVGI/75-100 MILLIMETRE TSP

C) 2500 CFM/8.8TR/3.5KW HEATER/ UVGI/75-100 MILLIMETRE TSP

A) 3100 CFM/12.0TR

B) 1750 CFM/6.0TR

C) 1650 CFM/4.60TR

D) 850 CFM/3.0TR

ITEM No. 581 :- Supply, installation, testing and commissioning of VRF/VRF based floor / ceiling suspended dual mount type, room/indoor unit (IDU) having nominal cooling capacity of 3.2TR (1200 cfm) to 3.6TR (1400 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etcetera IDU should have anti-corrosive coating suitable for coastal area. unit shall be of decorative slim dimension suitable for ceiling suspended having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation complete.

ITEM No. 582 :- Supply, installation, testing and commissioning of VRF/VRF based concealed split ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 1.8TR (600 cfm) to 2.0TR (800 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etcetera IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable for ceiling suspended having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation complete.

ITEM No. 583 :- Supply, installation, testing and commissioning of VRV / VRF based ceiling suspended 8.0TR (6600 cfm) to 10.0TR (8200 cfm) Treated Fresh Air (TFA) (5380 cfm) room/IDU with evaporator fan with motor, copper tube, aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power having anti-corrosive coating suitable for coastal area with decorative slim dimension suitable ceiling suspended arrangement and an electronic control console with any additional refrigerant and oil charge as per requirement during installation complete.

ITEM No. 584 :- Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etcetera IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

ITEM No. 585 :- Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etcetera IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete

ITEM No. 586 :- Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etcetera IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

ITEM No. 587 :- Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etcetera IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete.

ITEM No. 588 :- Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etcetera IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

ITEM No. 589 :- Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR (1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etcetera IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation

SPLIT UNIT - INVERTER SERIES - 5 STAR

ITEM No. 590 :- Supplying, installing, testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation and temperature display on indoor unit, noise level maximum 50dBA at position as per specification. * AHU with DX Coil-Valve kit to be provided for integration with outdoor unit. * This kit will consist of 1 set of electronic expansion valves , PCBs , drain connection , liquid and suction pipe connections ,supply and return air temperature sensor and wire and corded remote controller ( all housed in a GI powder coated casing). The exp. Valves will be controlled by PCB. Shielded communication wiring must be inter –connected between the AHU kit and the VRF odu. The kit has to connect the AHU with the return air temperature sensor , which will be mounted on the ahu return filter . The kit should be installed within maximum distance of 2.5 mt of the ahu. The capacity of the ahu kit will be 5 / 6.5 / 8 / 10 / 12.5 / 15 / 20 / 25 / and 32 TR capacity. Valve kit controler should be compitable with BMS system (Bacnet over IP protocol) if neccessary gate way to be provided.

ITEM No. 591 :- 24 HP for LAB2 @ 3RD FLOOR

ITEM No. 592 :- 22 HP for LAB1 @ 3RD FLOOR

ITEM No. 593 :- 18 HP for Major OT

ITEM No. 594 :- 14 HP for ICU @ 4TH FLOOR

ITEM No. 595 :- 12 HP for MINOR OT @ 4TH FLOOR

ITEM No. 596 :- 10 HP for MINOR OT

ITEM No. 597 :- 8.0 HP for HDU @ 4TH FLOOR

ITEM No. 598 :- 6.0 HP for NICU @ 4TH FLOOR

ITEM No. 599 :- Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall / ceiling with supports/raceways, Nitrile rubber insulation, painting etcetera with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

ITEM No. 600 :- Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete

ITEM No. 601 :- Supplying, laying/ fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 602 :- supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 603 :- Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 millimetre diametre (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 604 :- Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 605 :- Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 606 :- Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 607 :- Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 608 :- Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.20 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 609 :- Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.60 millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 610 :- Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3millimetre dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19millimetre thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

ITEM No. 611 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 612 :- Supply, Installation, Testing and Commissioning of charges alongwith topping-up of Eco Friendly with manufacturer recommonded refrigerant.

LOW SIDE AIR DISTRIBUTION

DUCTING

ITEM No. 613 :- Supply, installation and testing of FACTORY FABRICATED 120 GSM GI sheet metal ducts in accordance with the approved shop drawings and as required by the specifications.GI sheet will be as per IS-277 and fabrication will be as per IS-655/SMACNA. All necessary GI supports using thread rods (as directed) and anchor bolts, food grade neoprene gaskets, food grade adhesive, food grade silicon sealant ,turning vanes, splitters shall be included in the scope.No slip joint is allowed in any type of ducting.Only flanged joint with food grade rubber gasket is allowed.Duct Pressure testing of all main duct and main branches as per latest SMACNA standard for permissible air leakage shall be inclusive in the cost.No smoke or light test of duct is permitted.All duct joint, corners,flanges joints etcetera shall be properly covered with food grade silicon sealant for leak proof application inspite of leak proof duct joints.

A) 24 Gauge

B) 22 Gauge

C) 20 Gauge

ALUMINUM DUCTS

ITEM No. 614 :- Supply, installation and testing of FACTORY FABRICATED Aluminum sheet metal ducts For OT in accordance with the approved shop drawings and as required by the specifications. All necessary supports adhesive,silicon sealant shall be included in the scope.Only flanged joint with food grade rubber gasket is allowed. with necessary insulation

A) 24 Gauge

B) 22 Gauge

ITEM No. 615 :- Supply, installation, testing and commissioning of UL Listed GI body fire damper with Motorized electrically operated shown in approved shop drawings. (Cross sectional face area to be measured to calculate Sq.mtr)

ITEM No. 616 :- Supply, installation, testing and commissioning of UL Listed GI body fire operated actuators operating at 230 AC volts at locations shown in approved shop drawings. Note : actuators should supply with necessary controller for on/off operation as per fire panel inputs. (Cross sectional face area to be measured to calculate Sq.mtr.)

ITEM No. 617 :- Supply, installation, testing and balancing of powder coated Extruded Aluminum supply Air /Return air/exhaust /fresh air Grilles with OB collar dampers in accordance with the approved shop drawings and specifications. (Cross sectional face area to be measured to calculate Sq.mtr.)

ITEM No. 618 :- Supply, installation, testing and balancing of Powder coated extruded aluminum construction. Square shape supply air diffusers with removable core and anti smudge ring, with OB collar damper as per approved shop drawings and following neck sizes.

ITEM No. 619 :- Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.

ITEM No. 620 :- Supply, installation, testing and balancing of Powder coated extruded aluminum construction. Square shape supply air diffusers with removable core and anti smudge ring, without OB collar damper as per approved shop drawings and following neck sizes.

ITEM No. 621 :- Supply, installation, testing and balancing of opposed blade AL manual operated Volume control dampers in supply air / Return/exhaust/fresh air duct as per approved shop drawings.( In to In sizes and cross sectional area to be taken into consideration to calculate Sq.mtr. area)

ITEM No. 622 :- Supplying and fixing wire mesh (Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jali cover shall be made from good quality G.I. wire mesh size 25 x 25 (mm) and made up of 14 SWG G.I. wire with side / supporting MS strips of suitable size.

ITEM No. 623 :- Supply, installation, testing and commissioning of flexible preinsulated spiral duct in accordance with the approved shop drawings and specifications.

ITEM No. 624 :- Supply, installation, testing and commissioning of flexible spiral duct in accordance with the approved shop drawings and specifications.

ITEM No. 625 :- Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete.

ITEM No. 626 :- Supply, Installation, Testing and Commissioning of inside wall mounted Aluminum body Pressure Relief Damper to maintain 10/50 Pascal Pressure positive pressure difference complete with all design counter weight accessories etcetera .

OT AHU ACCESSORIES

ITEM No. 627 :- Supply, installation testing and validation of Aluminum made factory fabricated Laminar Flow OT Plenum Units of 14 gauge thickness comprising of Terminal MERV- 17 HEPA Filters of 99.997% Efficiency down to 0.3 Micron particle size installed in zero leakage Aluminum made frame with Aluminum made perforated plate type SA grille inclusive with all necessary 4 nos. supply air Aluminum made VCD in supply air tapping's to plenum.All necessary supporting SS-304 made structure , SS-304 made hangers,SS-304 made nut ,bolts, washers, SS-304 made channels, SS-304 made fasteners etcetera shall be part of scope of supply.The contractor shall submit the GA drawing with technical specification before ordering for the OT plenum. OT plenum shall be designed at minimum at 25-35 FPM outlet terminal velocity (As per revised NABH guideline) suitable for following mentioned supply CFM.

A) Size : 9.6 feet x8.6 feet for 4500 cfm

B) Size : 8.3 feet x6.6 feet for 2500 cfm

ITEM No. 628 :- Supply, installation testing and validation of Aluminum made 18 gauge thickness factory fabricated front openable with counter sunked screws (for cleaning purpose) return air risers with inbuilt Aerofoil Zero Leakage Aluminum made volume control Damper and fitted with Aluminum made Zero degree inclination return air grills at front bottom. Return air risers sizes and location (preferably at 4 extreme corners of OT section) shall be suitable for following air CFM for proper laminar flow air distribution throught the OT section area. All necessary supporting SS-304 made structure, SS-304 made hangers, SS-304 made nut, bolts, washers,SS-304 made channels, SS-304 made fasteners etcetera shall be part of scope of supply. The contractor shall submit the GA drawing with technical specification before ordering for the OT risers.

A) For Return Airflow of 750 CFM (size-450x 400mm) (major OT)

B) For Return Airflow of 750 CFM (size-500x 300mm) (Minor OT)

C) For Return Airflow of 625 CFM (size-500x 200mm) (Minor OT)

THERMAL INSULATION and ACCOUSTIC INSULATION

ITEM No. 629 :- Providing adhesive thermal insulation for supply return air duct with 19 millimetre nitrile rubber insulation having R-value as per the prevailing provisions in ECBC 2017

ITEM No. 630 :- Supply, Installation, Testing and Commissioning of Duct Thermal insulation of fire retardant shall be applicable for following areas OT's.The duct thermal insulation material shall be of closed cell structure nitrile rubber with factory laminated 7 mill glass cloth of density 40-60 kg/m3. The duct adhesive shall be as per OEM. The product shall have temperature range of -40°C to 105°C. The insulation material shall be fire rated for Class 0 as per BS 476 Part 6 : 1989 for fire propagation test and for Class 1 as per BS 476 Part 7, 1987 for surface spread of flame test. It should be CFC free.It should not be non-corrosive to copper and stainless when tested as per DIN 1988. The material should not develop crack when tested for Ozone resistance as per ASTM 1149. No cracks should be develop when exposed to UV as per ASTM G 154-04.The resistance microbiological growth should be in accordance to UL 181-and meet the acceptance criteria of resistance to fungal contamination as per ASTM G21. It should meet the acceptance criteria of resistance to bacterial contamination as per ASTM 2180.

A) 25 millimetre thick insulation for supply Air, Fresh air duct

B) 19 millimetre thick insulation for Return air ducts

ITEM No. 631 :- Providing adhesive thermal insulation for supply return air duct with 19 millimetre nitrile rubber insulation having R-value as per the prevailing provisions in ECBC 2017 19millimetre thick

ELECTRICAL WORK

ITEM No. 632 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

ITEM No. 633 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

ITEM No. 634 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses / pole or laid in provided trench/ pipe as per specification.

ITEM No. 635 :- Supplying, erecting and terminating HFFR insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands and lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

ITEM No. 636 :- Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification.

ITEM No. 637 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 millimetre thick) GI sheet of 400 millimetre width and 100 millimetre height comprising all required standard accessories

ITEM No. 638 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 millimetre thick) GI sheet of 300 millimetre width and 75 millimetre height complete with necessary coupler plates and hardware

ITEM No. 639 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 millimetre thick) GI sheet of 200 millimetre width and 75 millimetre height complete with necessary coupler plates and hardware.

HVAC CONTROLS

SENSORS and FIELD DEVICES

ITEM No. 640 :- Supply, installation, testing and commissioning of the following Sensors complete as per tender specification.

A) Duct Temperature Sensor shall be with rigid stem and of averaging type for measuring Supply air temperature at the Air Handling Units (Range 7.22⁰C - 65.5 ⁰C)

B) Combined AMBIENT air temperature and RH sensors for measuring ambient air temperature (Range 7.22⁰C - 65.5 ⁰C) &Ambient air RH (Range 10 % -100 %). The accuracy of temperature sensor shall be ± -0.2 ⁰.

C) Combined air temperature and RH sensors for measuring Return air temperature and RH. The accuracy of temperature sensor shall be ± -0.2.

ITEM No. 641 :- Diaphragm type Differential pressure switches across the MERV-7,MERV-14,MERV-17 filters for indicating filters status. Pressure differential – 10 millimetre – 125 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.

ITEM No. 642 :- Differential Pressure Transmitter OT Pressure control ( 15 Pascal set point) complete with wall mounted fixtures / two side Tubing complete having measurement accuracy up to 0.05% or better

ITEM No. 643 :- Air flow transmitter for measuring supply air cfm of all OT plenum with accuracy of +/-3%

DIGITAL MAGNAHELIC GUAGES

ITEM No. 644 :- Supply, Installation, Testing and Commissioning of digital Magnahelic guages for monitoring room differential pressure in critical areas (For Lab and OT's ).

CABLES and CONDUITS

ITEM No. 645 :- Supplying, laying, termination, testing and commissioning of Flexible signal cables. (2 core 1 mm2),[1 pair] twisted with overall shield PVC insulated, tinned copper conductor cable

ITEM No. 646 :- Supplying, laying, termination, testing and commissioning of Flexible signal cables. (4 core 1 mm2), [1 pair] twisted with overall shield PVC insulated, tinned copper conductor cable.

ITEM No. 647 :- Supplying, laying, termination, testing and commissioning of Flexible signal cables. (6 core 1 mm2),[1 pair] twisted with overall shield PVC insulated, tinned copper conductor cable

ITEM No. 648 :- Supplying, laying, termination, testing and commissioning of Flexible communication cables. (2 core 1 mm2),(2 pair) twisted with individual and overall shield PVC insulated, tinned copper conductor cable.

Supply, installation, testing and commissioning of the following Conduits complete as per tender specification.

ITEM No. 649 :- Supplying and erecting 25 millimetre dia. corrugated flexible polypropylene conduit

ITEM No. 650 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimetre dia. with PVC accessories on wall /ceiling as per specification

VENTILATION WORK

EQUIPMENT

A) Exhaust Air Fan : Each Fan Capacity / rating shall be:23000 CFM @ 15 mmwg ESP, Motor of 12 KW -18.5 KW rating @ 6 Pole, Speed 970 rpm, power supply - 415V / 3ph / 50Hz, suitable for working in conjunction with a VFD.

B) Exhaust Air Fan : Each Fan Capacity / rating shall be:20000 CFM @ 15 mmwg ESP, Motor of 12 KW -18.5 KW rating @ 6 Pole, Speed 970 rpm, power supply - 415V / 3ph / 50Hz, suitable for working in conjunction with a VFD.

C) Fresh Air Fan : Each Fan Capacity / rating shall be:23000 CFM @ 15 mmwg ESP, Motor of 12 KW -18.5 KW rating @ 6 Pole, Speed 970 rpm, power supply - 415V / 3ph / 50Hz, suitable for working in conjunction with a VFD.

ITEM No. 652 :- JET FANS FOR BASEMENT as per below description and the tender technical specifications SITC of AMCA Certified JET THRUST / IMPULSE FAN complete Fan including and each components shall be fire rated as per IEC standards and designed to with stand 300° C temperatures for 2 hour in the event of fire. Fan motor shall be two speed 2P/4P , high efficiency and low noise design. Sound levels @ 1m from fan shall not exceed levels of 65/45 dba. Each fan shall be of octogonal/circular design with impeller not more than 315 millimetre in dia and with a thrust not less than 22 NM @ high speed to cover an area of apprx 300 sqm. Fan casings and outside sheet for fan housing and silencers manufactured from pre-galvanised sheet. Fan and its standard isolator to fully meet the F300 time/ temperature classifications of EN 12101-3 (300°C for 120 minutes). Test Certificates to be produced prior to delivery of the units. The fan shall incorporate factory mounted silencers at the inlet and the outlet alongwith guide vanes to straighten air flow and all accessories like mounting brackets etcetera. Sound attenuating material to be non-flammable in accordance with NFPA/DIN 4102 and as per EU guide line. Steel (powder coated) Protection guards to be provided at inlet and outlet for each fan along with air deflector at outlet. Each fan to have a pre-wired terminal box with starters, contactors, relays and autochangeover from low speed to high speed with Dahlander connection ( tapped winding). It shall be manufactured to resist high tempertures in the event of emergency.Box to have easy access for service. The fan module to be removable for easy maintenance.

A) Fans capacity / ratings shall be: min 1200/2400 cfm (at low and high speed respectively) @ 0 mmwg FAD (or suitable to deliver the performance), dual speed Motor, 2/4 Poles,power supply - 415V / 3ph / 50Hz. NOTE: 1. Total height of fan including silencer and supports shall not exceed 450mm. 2. For protection of cable trays and equipment from the wall and ceiling slab painting work contractor should be wrap all the equipments after installation with polythin marerial.

ITEM No. 653 :- SITC of Carbon Monoxide based Gas detection system comprising of co sensors, digital LED display with each sensor, transmitter with built in power supply units. Detectors shall be mounted in enclosure with sensor lid projection at distance not more than 1500 millimetre from floor and shall have suitable arrrangement to fix on wall. Device shall be comprising of sensors, transmitter unit, power supply unit suitable for loop powered 230 VAC supply, Sensor shall have range of 0-250 PPM non linear sensing, sensors shall be solid state type with operating temperature range of -10 to 50 deg.c and relative humidity of 10% to 100% [non condensing]. Enclosure shall be in minimum IP 65 construction as per the specifications

CABLE TRAYS

Lift well Pressurization fan 17000 20 mm. 7.5

SPACE CFM ESP (mmwg) Motor Kw

STP Room -1 7000 25 mm. 2.2

ITEM No. 655 :- Supplying, erecting, testing and commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 20millimetre suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete.

2 Toilet Exhaust 4000 25 mm. 2.2

ITEM No. 656 :- Supplying, erecting, testing and commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300 cfm capacity with maintaining the static pressure minimum 20millimetre suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.

ITEM No. 657 :- Supplying, erecting, testing and commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 20millimetre suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete.

ITEM No. 658 :- Supplying, erecting, testing and commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having suitable with maintaining the static pressure minimum 20millimetre suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete.

A) Isolation Room EX 2700 CFM 25 mm. 0.25 KW

B) Electrical substation -1 9300 CFM 25 mm. 10 KW

C) FF Pump Room Fresh and Exhaust air fan 1500 25 mm. 2.2

D) Lab 2500 CFM 25 mm. 0.75 KW

ITEM No. 660 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

MOTOR CONTROL CENTRE PANEL

ITEM No. 661 :- Supply and Installation of MCC Electrical Panel made out of 1.6 millimetre CRCA sheet finished with Siemens Grey powder coated painting and degree of protection –IP 43. Panel complete with Built in PLC, MCB/MPCB Feeders and Starters for Jet Impulse fans with dual speed. All Jet Impulse Fans and Parking Exhaust air Fans controlled through CO level feedback by individual MCC Panel's PLC and in case of Emergency speed of exhaust fans shall be increased to 50Hz. All panels shall be floor mounted and top cable entry, suitable incomer MCCB, aluminum bus bar and custom built microprocessor logic controller with necessary control wiring etcetera Each feeder shall have TPN MCB, two starters and indication lamps, toggle switch for two speed operations and PLC logic controller with necessary internal control wiring etcetera Supply, Installation, Testing and Commissioning of Programmable Logic controller as per the below description and the Tender technical specs : Supply, Installation, Testing and Commissioning of Universal Controller PLC with main componentslike power, processor, input and output cards, an open protocol for interface with the BMS systems. PLC to be complete as per specs installed inside the Main Switchgear MCC panel. The PLC shall have a FULL MODBus / BACnet / Eithernet interface facility with the Central BMS system. Scope to include the Gateway or converter, Communication module, HVAC software in addition to the standard features.

Minimum Specifications of a Controller are as follows (but should meet the project needs): a) 10 x analogue inputs for CO or other pollutant sensors. (0-20mA, 0-5V and 0-10V input available). b) 16 x digital inputs for fan run/fault status. c) 1 x emergency alarm (i.e. fire) digital signal inputs. d) MODBUS, BACnet and other protocols for supervisory connection with BMS system. Built-in communication - Modbus slave serial link by means of connection on integrated RJ45 port (Modbus master/slave serial link on integrated RJ45 port). e) 3 x analogue outputs available to speed control groups of JetVent Fans, central car park exhaust fan or supply fan. f) 3 x digital outputs to drive speed control relays (for 2 speed fans) or other systems according to pollutant concentration. Other Standard Details which the Basic Controller shall have are as follows : a) Programmable Logic Controller with HVAC software b) Dedicated PWM programmable output. c) Programmable Anagol Outputs/Inputs 0 - 10 V, 0 - 20 mA, 4 - 20 mA d) Display block for displaying the controller status: 4 LEDs (PWR, RUN, ERR and EXP) and 1 LED that can be used in the application. e) Connector for a removable terminal block (1) (2 terminals) for connecting the 24V c/a supply. f) RJ11 connector marked Prg. Port for connecting a programming port g) Connector for a removable terminal block (1) (9/10 terminals), for connecting analog inputs. h) Connector for a removable terminal block (1) (16 terminals), for connecting discrete inputs. i) Connector for a removable terminal block (1) (5 terminals), for connecting analog outputs. j) RJ45 connector, marked MBS1, for connection to the Modbus™ bus. k) RJ45 connector, marked MBS2, for connection to the Modbus bus. l) Five Modbus bus and expansion bus polarization and line terminator adjustment switches. m) Connector for a removable terminal block (1) (3 terminals), for connecting the expansion bus. n) Connector for a removable terminal block (1) (2 terminals) to connect the power supply for a remote display unit TM168 GDBp (2). o) Connector for a removable terminal block (1) (5 terminals), for connecting 3 discrete relay N/C outputs. p) Connector for a removable terminal block (1) (6 terminals), for connecting 4 discrete relay N/C outputs. q) Connector for a removable terminal block (1) (3 terminals), for connecting the discrete relay C/O output. r) Display with 6 command buttons for setting the controller parameters s) logic controllers are mounted as standard on a 35 millimetre DIN rail.

A) Basement-1 PLC Panel as per Electrical SLD

B) Basement-2 PLC Panel as per Electrical SLD

Note:- 1. The PLC panel should include DOL / VFD for Main exhaust, fresh air fans and all Jet Fans as applicable, as per above Panel manufacturer will be CPRI approved manufacturerer fan spacification.

CONTROL PANELS FOR FANS

A) MPCB suitable for up to 1.5 KW to 3 KW motor with DOL Starter

B) MPCB suitable for 7.5 to 11 KW and above motor with Star-Delta Starter

C) MPCB suitable for up to 2.2 KW to 3 KW motor with VFD Starter (FOR OT)

D) MPCB suitable for up to 3.7 KW to 5.5 KW motor with VFD Starter

ITEM No. 663 :- Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD <3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB, MCB etcetera wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully compprehensive maintenance contract as per Specification

ITEM No. 664 :- Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity with SS water tank of 0.5 millimetre thickness conforming to IS1239 Part-I :2004 complete as per specification.

ITEM No. 665 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 666 :- Supplying and erecting static energy Trivector meter 440 V 50 Hz. 20- 100A ISI mark meter AC 3 phase 4 wires LCD/LED display (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port and Display in absence of Power complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested for class 1.0 accuracy by electric supply company.

TOTAL (ii) Electrical Work

TOTAL (i) Civil Work

TOTAL (ii) Electrical Work

TOTAL PART – A (Work Portion)

K H CONSTRUCTION

Pawar Patkar Constructions Pvt.Ltd.