Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.9 Cr
EMD Value
₹2.4 L
Closing Date
9 Mar 2025, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Praveen Gwari
Development work of Navalgund Town Muncipal Council Neelakantha Shastri Kala Bhavan and Toilet Construction Work under Nagarothan Phase 4 at Navalgund
DMA/2024-25/BD/WORK_INDENT32124/CALL-2
DMA/2024-25/BD/WORK_INDENT32124/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
DMA District Urban Development Cell Dharwada
18 documents required · 18 mandatory
Work Done Certificates for the Work performed as Prime Contractor (in the same name) on works of similar nature during the five years specified (Similar nature of Similar Nature of Building Work Done certificate i.e. 50 percent of amount put to tender) for Rs 80.93 Lakhs
The Tenderer or his identified sub-contractor should have executed similar electrical work at 50 percent during the five years specified for Rs 9.62 Lakhs
Work Done Certificate for the Work performed as Prime Contractor (in the same name) on works of One Building Work containing acoustic work at 50 percent during the five years specified for Rs 13.67Lakhs
The workdone certificates for the qunatites of work executed as prime contractor (in the same name) during the last five years specified along with details in the format as in the bid document 1. Providing and supplying and installing Acosutical wall panelling/Providing supplying supplying and fixing Vinyl Carpet acoustical carpet Qty 658.74 sqm 2..Providing supplying and installing push back classic auditorium chair qty 238 Nos 3. Providing and laying cement concrete paver bock qty 954.40 sqm 4.Providing and laying in position reinforced cement concrete/plain cement concrete qty 194.99 cum supplying fitting and placing TMT steel reinforcement Qty 12.58 Tonne.
Valid contractor license certificate issued from competent authority in Appropriate Contractor Class
Valid PAN Card of the Participating Bidder
Valid GST Registration Certificate
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with thedetails in the format as in the bid document
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (B) Works for which Tenders already submitted: along with the details in the format as in the bid document
Notary Affidavit Declaration that the bidder has not been blacklisted on Stamp paper of Face Value Rs 500
Line of Credit i.e. 30% of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document for Rs 48.56 Lakhs
Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details achieved in at least two financial years a minimum financial turnover ofRs 323.72 Lakhs
profit and loss statement in the name of the participating bidder
balance sheet tallying the Annual Turn Over during the previous five years in the name of the participating bidder
ITR Returns filed Copy in the name of the participating bidder
Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person & Designation, Contact Number Office Landline / Mobile, and valid email ID
Notary Self Attestation regarding Agreed to Terms and Conditions as per (bid document) kw4 on face value of Stamp Paper Rs 500
₹4,780
₹2.4 L
5 Feb 2025
5 Feb 2025
10 Mar 2025
5 Mar 2025
20 Feb 2025
Development work of Navalgund Town Muncipal Council Neelakantha Shastri Kala Bhavan and Toilet Construction Work under Nagarothan Phase 4 at Navalgund
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Providing and Filling in foundation with granite/trap broken metal 100 mm & down size & with approved sand including handpacking ramming watering including cost of all materials and labour with all le...
PCC:Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
RCC :Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub-structure works of bridges, Drain works & other parallel works from 0.50m to ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations ,footings,bases of columns for mass concrete including cost of all materials, labour co...
Providing and removing centering, shuttering, strutting, propping etc.and removal form work for Drain Walls,Raft etc , including cost of all materials, labour complete as per specificaiton.Percentage ...
Providing and removing centering, shuttering, strutting, propping etc.and removal form work for Plinth Beam etc , including cost of all materials, labour complete as per specificaiton.Percentage on fi...
Providing and removing centering, shuttering, strutting, propping etc.and removal form work for column etc , including cost of all materials, labour complete as per specificaiton.Percentage on finishe...
Providing and removing centering, shuttering, strutting, propping etc.and removal form work for Roof Beam etc , including cost of all materials, labour complete as per specificaiton.Percentage on fini...
Providing and removing centering, shuttering, strutting, propping etc.and removal form work for Roof Slab etc , including cost of all materials, labour complete as per specificaiton.Percentage on fini...
P/TMT Steel reinforcement : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, ...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 20MSA upto 50MSA &...
Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.Vol 2, Sl.No 12.60,Pg no 105
P/15mm thick plastering to inside walls : Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement on the roughside of single or half...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
EXTERIOR PAINT Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m²...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...
P/M.S. :Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.400 mm sweep VOL 6, SI NO 6.5.2,Pg no 30
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm .Vol 6, Pg N...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25mm nominal bore, weighing not less than 62 g PWD SR Vol 2 ,pg no 121 ,SL no 13.28.3
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A SP Switch vol 6, pg no 10, 3.14.1
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A :Lamp Holder. PWD vol 6, pg no 10, 3.14.2
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A :Three Way 5 Pin Socket PWD vol 6, pg no 10, 3.14.3
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge: The rate includes ...
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charg...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Supply of DG Set : 50 kW/62.5 kVA Diesel Generator set rated at 50 kW/62.5 kVA, 415 V, 0.8 pf mounted on a base frame, complete with inbuilt fuel tank and battery 1 no. 12 V & inbuilt standard manual ...
Providing & Fixing Vinyl Carpet Acoustical Carpet with Stain, water Oil resistanton on all passage Providing and fixing of Sound Absorbent Anti bacterial Woven vinyl floorings with roll dimensions of ...
SITC of Push Back Classic Auditorium ChairPUSH BACK Classic CHAIRS is an optimally designed chai for use in and auditoriums Epoxy powered coated paint for all steel parts. 25mm 5mm MS flat made back i...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Nilaknt Shastri Booklet (1).doc
Tender Document • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .