Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.2 L+₹2.4 L (7.62%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L3₹35.8 L+₹4.0 L (12.6%)Rejected-AOC 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 4 | L4₹35.9 L+₹4.1 L (12.9%)Rejected-AOC VILL PO KUMARHATTI DIST SOLAN HP | SOLAN | SOLAN | HIMACHAL PRADESH | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 5 | L5₹37.8 L+₹6.1 L (19.1%)Rejected-AOC | L5 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
RAHUL MEENA IDSE EE
MES OFFICE GE KASAULI DISTT SOLAN HP
COMPREHENSIVE MAINTENANCE PETTY B AND R REPAIR WORKS AND PERIODICAL SERVICES TO VARIOUS BLDGS OF OTM ACCN AT KASAULI MIL STATION UNDER GE KASAULI
2022_MES_521234_1
GEK-10/2022-23
Open Tender
Civil Works
Item Rate
180 days
KASAULI UNDER GE KASAULI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE KASAULI
₹90,000
Yes
9 Jun 2022
30 Apr 2022
2 Jun 2022
30 Apr 2022
26 May 2022
14 May 2022
60 days
Amount
Schedule 'A' Section - I
M&L for preparation of old decorated plastered / unplastered surfaces of wall including cornices, pillasters etc of bldgs and applying one coat of white wash complete all as specified and directed by Engr-in-Charge .
All as per item No 1.00 above but two coats of white wash complete all as specified and directed by Engr-in-Charge .
All as per item No 1.00 but applying two coat of white wash on wall after complete removal of existing treatmentcomplete all as specifed and directed by Engr-in-Charge.
All as per item No 1.00 here in before but one coat of white wash on ceiling and AC plain building board surfaces as in ceiling complete all as specified and directed by Engr-in-Charge .
M&L for for applying 1 mm thick wall care putty of old decorated plastered or unplastered surfaces of wall complete all as specified and directed by Engr-in-Charge
M&L 3mm thick wall care putty on wall complete all as specified and directed by Engr-in-Charge .
M&L for preparation of plastered or unplastered old surfaces of walls and applying one coat of cement paint of any approved tint complete all as specified and directed by Engr-in-Charge .
All as per item No 7.00 above but complete removal of existing treatment and applying two coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge and directed
All as per Srl item No 7.00 but two coats of cement base paint complete all as specified and directed by Engr-in-Charge.
M&L for preparation of plastered or unplastered old surfaces of walls and applying one coat of oil bound distemper of any approved tint complete all as specified and directed by Engr-in-Charge .
All as per item No 10.00 but complete removal of existing treatment and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge .
M&L for complete removal of existing treatment on old surface and applying two coats of oil bound distemper on wall over a coat of primer on plastered and other surfaces complete all as specified and directed by Engr-in-Charge .
All as per item No 10.00 above but one coat of oil bound distemper on ceiling and AC plain building board surfaces as in ceiling complete all as specified and directed by Engr-in-Charge.
Preparation of old Non-AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge .
M & L for preparation of old painted wooden surfaces of any description position and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) all as specified and directed by Engr-in-Charge .
All as per item No 15.00 above but applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge .
M&L preparation of old painted steel surfaces exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge .
All as per itme No 17.00 above but two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge .
M&L preparation of old painted NTP/CGI/PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint as approved complete all as specified and directed by Engr-in-Charge
Preparing zinc or galvanised surfaces to receive painting , and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge .
M&L disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position including cleaning and removing all a scale and dirt etc from tanks and from mouth of circulating pipes etc capacity exc 250 ltrs but n. exc 500 ltrs complete all as specified and directed by Engr-in-Charge .
All as per item No 21.00 above but exc 500 Ltrs and n exc 1000 Ltrs capacity complete all as specified and directed by Engr-in-Charge .
M &L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed by Engr-in-Charge .
M&L preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment by washing, rubbing down and stopping of previously treated surfaces and applying two coat of exterior emulsion paint over a coat of primer of approved tint and make complete all as specified and directed by Engr-in-Charge .
All as per item No 24.00 above but one coat of exterior emulsion paint complete all as specified and directed by Engr-in-Charge .
M & L for taking down cement or lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge .
M & L for Rendering 15mm thick in cement plaster 1:4 on other than fair faces of stone or brick surfaces incl finishing surface with out using extra cement complete all as specified and directed by Engr-in-Charge .
M & L for Rendering 15mm thick in cement plaster 1:6 on fair faces of brick or stone surfaces or concrete surfaces/stone work incl finishing surface w/o using extra cement complete all as specified and directed by Engr-in-Charge .
M&L for rendering 10mm thick in cement mortar 1:3 on ceiling brick/concrete surfaces w/o using extra cement all as specified and directed by Engr-in-Charge .
M&L for 5mm thick plaster in CM 1:3 finished even & smooth without using extra cement in patches n.exc. 3 Sqm each,on ceiling of concrete surfaces complete all as specified and directed by Engr-in-Charge .
M & L for Preparation of new surfaces applying two coats of oil bound distemper over one coat of chalk whiting on walls all as specified and directed by Engr-in-Charge .
M&L for preparation of new plastered surfaces of wall including cornices, pillasters etc of bldgs and applying two coat of white wash complete all as specified and directed by Engr-in-Charge .
M & L forPreparation of new surfaces applying two coats coat of cement base paint over one coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge
Preparing newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and directed by Engr-in-Charge .
Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge .
M & L for Renewing tiles in patches, area n exc 5 sq.m. includingvremoving and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete.
Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge .
M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L Vitrified ceramic coloured tiles (of approved shade) of size n.exc. 600x 600 mm x (8 to 9) mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed by Engr-in-Charge .
-ditto- as per item no 39.00 above but as in skirting incl 10 mm thick rendering in CM 1:3, complete all as specified and directed by Engr-in-Charge
Demolition stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge .
M&L for 16 to 18 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps,jambs,pillars,windows cills,cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:6 ,complete all as specified and directed by Engr-in-Charge .
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, including making hole by drilling for gas pipe and other similar situations all as specified and directed by Engr-in-Charge .
Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed by Engr-in-Charge .
M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge .
S&F in repair for 15 mm ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( min wt 15mm -142 gms ) complete all as specified and directed by Engr-in-Charge ..
S & F 20 in repairs mm bore ball brass float valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule etc complete all as specified and directed by Engr-in-Charge .
S&F in repair 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and directed by Engr-in-Charge .
S&F in repair 15mm bore PVC connection with PTMT nut of length 450mm etc complete all as specified and directed by Engr-in-Charge .
S&F in repair 15mm bore Bib taps, chromium plated cast copper alloy, fency type with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engr-in-Charge
Ditto as item No 50.00 above but long body
S&F in repairs PVC waste down pipe 32 mm bore etc complete all as specified and directed by Engr-in-Charge .
S&F in repairs 32mm brass C.P coupling for WHB complete all as specified and directed by Engr-in-Charge .
S&F in repairs 40mm brass chromium plated waste coupling for kithen sink complete all as specified and directed by Engr-in-Charge .
S & F in repair for 15mm bore pillar tap fancy type, cast copper alloy chromium plated screwed down, high pressure with crutchor butter fly handle etc complete all as specified and directed by Engr-in-Charge .
S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and directed by Engr-in-Charge .
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge
S&F in repair CP toilet paper holder all as specified and directed by Engr-in-Charge .
M&L in repair for floor door stopper of aluminium alloy body 150mm long and tongue, anodised with hard drawn steel spring fixed to door shutters complete all as specified and directed by Engr-in-Charge .
S&F in repair brass chromium plated shower rose with or without swivel joints and size including fixing to steel pipe or unions mixing valve including three joints to steel pipes or union and plugging and screwing to walls complete all as specified and directed by Engr-in-Charge
S&F in repair Towel rail 20mm dia ,600mm long brass chromium plated fixed in and including chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed by Engr-in-Charge .
S&F as in repair fixing vitreous china sqatting pan WC Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) includung provision of lime concrete bedding etc complete all as specified and directed by Engr-in-Charge .
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltrs capacity complete all as specified and directed by Engr-in-Charge complete all as specified and directed by Engr-in-Charge .
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl making good to floor to match with adjoining surfaces all as directed by Engr-in-Charge
S&F EWC seat cover, in white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, in repairs complete all as specified and directed by Engr-in-Charge
Supply & fixing Tank Cover 500 ltr. Complete all as specified and directed by Engr-in-Charge .
Supply & fixing Tank Cover 1000 ltr. Complete all as specified and directed by Engr-in-Charge .
M & L for 15mm bore `Medium grade` GI tubing with all fitting and to walls and ceilings or laid in floors as in repair including taking down old unserviceble pipe complete all as specified and directed by Engr-in-Charge c.
M & L for 20mm bore `Medium grade` GI tubing with all fitting and to walls and ceilings or laid in floors as in repair including taking down old unserviceble pipe complete all as specified and directed by Engr-in-Charge .
Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and directed by Engr-in-Charge
Dismantling existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed by Engr-in-Charge .
Dismantling existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed by Engr-in-Charge .
M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed by Engr-in-Charge .
M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed by Engr-in-Charge .
S & F in repair CP soap dish fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge .
S&F in repair PVC bath cabinate with mirror ,complete all as specified and directed by Engr-in-Charge .
S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to laid in trenches or in floors/wall complete all as specified and directed by Engr-in-Charge
S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed by Engr-in-Charge .
S&F PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge .
S&F PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge .
S & F in repair 110 mm PVC (SWR) floor trap plain including jointing with solvent cement.
S & F in repair 75 mm PVC (SWR) floor trap plain including jointing with solvent cement.
Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed by Engr-in-Charge .
Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed by Engr-in-Charge
S & F 35 mm thick factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete, all as specified and directed by Engr-in-Charge .
S & F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats.
M&L 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge .
M & L for two coats of synthetic enamel paint over coat of pink primer on new wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge .
S&F factory Made Solid PVC Moulded Door Shutter with partice board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specificatio n and all as directed.
S&F solid PVC door frame of size 50mm x 95 mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing
S &F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge .
S &F Anodised aluminium window and ventilator shutters, side hung type without sash , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 m long(2 Nos) suitable handle(1 Nos).complete al as specified and directed by Engr-in-Charge .
S &F Anodised aluminum grill of approved pattern / design with approved standard section and fixed to the existing window frame with CP brass / stanless steel screws @200 mm centre to centre including cutting the grill to proper opening size fpor fixing and operation og handles and fixing approved anodiesd aluminium standard section around the opening all complete all as specified and directed by Engr-in-Charge and all as dircteded.
S & F for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge
S&F 100mm MS butt hinges, cold rolled medium weight complete all as specified and directed by Engr-in-Charge
M&L for18/19 mm Pre laminated block boards,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails complete all as specified and directed by Engr-in-Charge .
Dismantling wall as ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/kitchen cup board, any thickness, including cover fillets
M&L 6mm thick teak wood lipping for block board or veneered plywood 18/19mm thick, fixed with nails in repairs complete all as specified and directed by Engr-in-Charge and directed.
M&L for sheet glass ordinary quality 4.00mm thick with door / partition aluminium frames of area of each pane n exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge
M&L for sheet glass ordinary quality 4.80mm thick with door / partition aluminium frames of area of each pane exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge
S&F in repair continuous (piano) hinges, brass, bright finish width of flaps(when open) 30 mm complete all as specified and directed by Engr-in-Charge .
S&F 100 mm long aluminium handle fabricated type anodised, complete all as specified and directed by Engr-in-Charge .
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr-in-Charge .
S & F in repair for hasp and staple 75mm size, safety type aluminium anodised including bolt to hinge plate and fixed to cup board shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed by Engr-in-Charge .
S & F in repair for hasp and staple 100 mm size, safety type aluminium anodised including bolt to hinge plate and fixed to cup board shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed by Engr-in-Charge
S&F in repair 150 mm aluminium anodised barrel tower bolts of extruded section etc complete all as specified and directed by Engr-in-Charge .
S&F in repair 200 mm aluminium anodised barrel tower bolts of extruded section etc complete all as specified and directed by Engr-in-Charge and directed.
S&F in repair 250 mm aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) etc complete all as specified and directed by Engr-in-Charge .
S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable existing complete all as specified and directed by Engr-in-Charge
S&F 150mm aluminium handles cast type anodised fixed as in repair including taking down the unserviceable existing complete all as directed.
M&L for curtain rod powder coated ornamental type dia 25 mm & overall thickness 25 mm including taking out the existing complete all as specified and directed by Engr-in-Charge .
M & L for wall to wall brackets for 25 mm rods including taking out the existing complete all as specified and directed by Engr-in-Charge .
M & L for End cap for 25 mm dia ornamental type curtain rod taking out the existing complete all as specified and directed by Engr-in-Charge .
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed by Engr-in-Charge .
S&F Aluminium alloy wirecloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple etc complete all as specified and directed by Engr-in-Charge .
S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets, complete all as specified and directed by Engr-in-Charge
S&F in repair Sheet glass 3 mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out of old unseviceable g;lass all as specified and directed by Engr-in-Charge
S&F in repair figured glass 4.0 mm thick,pin head type and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out of old unseviceable g;lass all as specified and directed by Engr-in-Charge
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler with two or more coats complete all as specified and directed by Engr-in-Charge .
S & F in repair for stainless steel plate rack of size 24"x36"x10" with shelves,hooks and railing to keep plates vertically and horizontally,including necessary fixing arrangement.etc complete all as specified and directed by Engr-in-Charge and as directed.
S &F in repair Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.
S&F 8 to 12 mm prelaminated HDF flooring of tongue & groove interlocking flooring system(Consisting of aluminium oxidecoated tissue to make the floor surface resitant to impact, scratches,burn etc)over 200micron polyethelene sheet/EPE foram sheet as in floor surface complete all as specified and directed by Engr-in-Charge .
S&F CP grating of 100 mm da including jointing with solvent cement all as specified and directed by Engr-in-Charge .
Supply and fixing grating doom 100mm dia of PTMT fixed as in repair complete all as specified and directed by Engr-in-Charge .
S & F Bib tap standard of PTMT of size 15mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge .
S & F Pillar tap standard of PTMT of size 15mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) complete all as specified and directed by Engr-in-Charge .
S & F Angle Valve standard of PTMT of size 15mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-92gms) complete all as specified and directed by Engr-in-Charge .
S & F Stop Valve standard of PTMT of size 15mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed by Engr-in-Charge .
Taking down 12mm thick toughened/tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, as in repair complete all as specified and directed by Engr-in-Charge .
S&F 12mm thick thoughened/tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, as in repair complete all as specified and directed by Engr-in-Charge .
Taking down & Refixing by making good 12mm thick thoughened/tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, as in repair complete all as specified and directed by Engr-in-Charge .
Amount of credit of Rs. 48777.90 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
Varindera And Varindera Construction
Satyadev Builders
Vishal Builder
Sagar Builders
Rajesh Agencies
M/S CHOPRA & COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .