Streetscape development works on various corridors in zone-09, JDA Jaipur

Providing & Fixing of Vicro Spring Post made of Flexible PU UV Stabilized, Excellent ESCR, No rust No chip, size 80X750 mm with round 3 no radium tape desinbed for max ageing resistance under sunlight having upper dia 15 cm. and lower dia 20 cm with another attachment of 15x15 cm circular section with 15 cm. face plate and hold fast at bottom as per direction of Engineer In Charge

Providing & Fixing of Hydrose LED Kerb stone of size 500mm X X 150 mm 200mm and curb angle of 45 degrees having load carry capacity upto 800kg Led Strip & Connectors to be plastic coated in order to prevent exposure from moisture/water LED strip Length 465mm at an operation voltage of 36Volts with 22 no led in each strip with built in provision of interlocking of jointing and lifting compaction by placing 2 foundation rods in 1st & 5th leg of the curb stone & connecting male female wires between the blocks jointing at site with cement mortar 1:4 complete in all respect as directed by Engineer incharge on: 100 mm thick cement concrete 1:4:8 (1 Cement : 4 Coarse sand : 8 stone aggregate 20 mm thick nominal size) including excavation of earth and cutting of BT road cutting of WBM road etc. and disposal of surplus material with all lead and lift.

Providing & fixing 3M radium tape of approved colour & Design complete in all respect as per instruction by Enginner in Charge

Providing, supplying, erecting and completing modular food-court kiosk of approximately 3.00 m × 3.00 m × 2.70 m height over an existing prepared platform, comprising welded MS structural framework, 65 mm thick insulated PPGL wall and roofing panels, lockable MS rolling shutter, vitrified-tile flooring, MS-supported polished granite service counter, stainless-steel sink with bib cock and waste connection, internal electrical wiring, plug points, LED lighting and illuminated acrylic signage, including cutting, welding, fixing, fasteners, sealants, testing and all scheduled accessories, complete as per approved drawing and direction of Engineer-in-Charge.

Providing & Fixing of RotoSpiral slide with Slide Entry having Dimension• Product Area : 4.5m x 2.0m (14.8ft x 6.5ft)• Safe Play Area : 5.5m x 3.0m (18.1ft x 9.9ft)• Age Group : 4-12 yrs. It is made from 25NB anti corrosive Galvanized Pipe of length 1500mm with GI coated Base Plates together with standard ISA Foundation Angles to provide strong support. •Deck pipe: It is 100NB hot dip galvanized four support pipe of each length 3400mm conforming to IS 1239 with GI thickness of 60p •Roti spiral slide entry support part: It is combination rectangular pipe and plate of GI. •HandIe grip: Handle grip of 20NB conforming to EN 1176-1: 1998 attached with Nylon clamp of Grade-6 clamped to the Deck pipe using SS304 graded non rusting nut-bolts •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. •Sq. Brazing Frame: It is 1.16m x 1.16m GI Plated ISA conforming to 15-808-1964 •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 5O0mm & width 90mm EN1176-1: 1998 conforming to EN1176-1: 1998 The trade and riser of the ladder are designed in such a way it won‘t entrap child's foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Roto spiral Slide: It is made from rotational molded material. •FRP Platform: It is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 3-4 mm.its size is 1.16M X 1.16M. •Cross Checkered Railing & slim railing :It is made from rotational molded material. And assembled with pipe and clamp to deck pipe. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •For Rotoproduct: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. ROSD12 ROTO SPIRAL SLIDE WITH SLIDE ENTRY 2.1 MTR •Roto Slide entry: It is made from rotational molded material. And assembled with pipe and clamp to deck pipe. •Pipe I1aterials or Class: Light Duty ('A’ Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Complete as per direction Incharge

Providing & Fixing of Roto Double wave slide 1.5 mtr having Dimension: • Product Area : 5.0m x 2.5m (16.4ft x 8.2ft) • Safe Play Area : 6.0m x 3.5m (19.7ft x 11.5ft) • Age Group : 4-12 yrs.It is made from 25NB anti corrosive Galvanized Pipe of length 1500mm with GI coated Base Plates together with standard ISA Foundation Angles to provide strong support • supports: (i) It is made from 32NB of length 1100mm anti corrosive Galvanized Pipe with GI coated 150x150x5 plate together with standard ISA Foundation •deck pipe: It is 100NB hot dip galvanized four support pipe of each length 2740mm conforming to IS 1239 with GI thickness of 60p •Trap. Platform Railing: It is combination of roto railing, bush and 20NB Pipe. •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively. •Ladder Step: It is Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1: 1998 conforming to EN1176- 1:1998 The trade and riser of the ladder are designed in such a way it won't entrap child's foot whileplaying. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) & Light Duty ('A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Roto double wave Slide: It is made from rotational moulded material. •HandIe grip: Handle grip made of 20NB pipe conforming to EN 1176-1: 1998 attached with Nylon clamp of Grade-6 clamped to the Deck pipe using SS304 graded non rusting nut-bolts •Cross Checkered Railing & slim railing :It is made from rotational moulded material. And assembled with pipe and clamp to deck pipe. • Trapezium frame: ISA conforming to IS-808-1964 welded together to form a trapezium frame to be bolted to the deck pipes at the bottom for holding all the four deck pipes together & make the structure strong. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). ROSD15 Roto Double wave slide 1.5 mtr •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •FRP Platform: It is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 3-4 mm its size is 1.16MX 2.25M. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Complete as per direction of Engineer Incharge.

Providing & Fixing of FRP Roller Slide 1.5 Mtr having Dimension: • Product Area : 4.7m x 1.0m (15.4ft x 3.3ft) • Safe Play Area : 5.7m x 2.0m (18.7ft x 6.6ft) • Age Group : 4-12 yrs •SmaII H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation •Center Support pipe: 80NB hot dip galvanized Deck pipe conforming to IS 1239 with GI thickness of 60p •Ladder Frame:The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. •Ladder Step:Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1: 1998. The trade and riser of the ladder are designed in such a way it won‘t entrap child‘s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •PIatform : It is 16 SWG GI Plated Platform of size - 500x45Ox60mm •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •FRP Roller Slide landing: It is FRP Roller Slide landing with support flanges of ISA conforming to standards IS-808-1964 & it is made up of Fiber Reinforced Plastic (FRP) •FRP Roller Slide side arm: It Is made up of Fiber Reinforced Plastic (FRP) with reinforced pins for assembling the rollers •FRP Roller Slide top:It Is made up of Fiber Reinforced Plastic (FRP) •Pipe Materials or Class: Medium Duty (’B’ Class) & Light Duty ('A’ Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. Roller:It is made from LLDPE (Linear Low Density Polyethylene) Material.The most attractive and enjoyable of its kind, the slide chute consists of molded plastic rollers spread over the length. It is made in rotational molding. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •Powder coating: It shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Complete as per direction Engineer Incharge

Providing & Fixing of Roto wave slide 1.5mtr having Dimension• Product Area : 4.6m x 0.6m (15.1ft x 2ft) • Safe Play Area : 5.6m x 1.6m (18.4ft x 5.3ft)• Age Group : 4-12 yrs. Platform support pipe: It is 80NB hot dip galvanized center support pipe of length 1980mm conforming to IS 1239 with GI thickness of 60d •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively. •Landing support: It is made from 25NB anti corrosive Galvanized Pipe of length 1500mm with GI coated Base Plates together with standard ISA Foundation Angles to provide strong support •Ladder Step: It is Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1: 1998 conforming to EN1176-1: 1998 The trade and riser of the ladder are designed in such a way it won‘t entrap child‘s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 6omicron. •Pipe Materials or Class: Medium Duty (’B’ Class) & Light Duty (’A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •PIatform: It is 16 SWG GI Plated Platform of size - 500x450x60mm Roto wave Slide: It is made from rotational molded material. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Complete as per direction of Engineer Incharge

Providing & Fixing of DOUBLE ARC SWING having Dimension: • Product Area : 3.2m x 1.5m (10.5ft x Sft) • Safe Play Area : 4.2m X 2.5m (13.8ft X 8.2ft) • Ideal For : 4-14 Years • Friends at a time : 2 Arc swimgframe : 6000mm long 80NB Pipe bent in Single Piece & welded together with a flange Smm thick & ISA of 40x40x5mm to form a strong frame. The 80NB pipe is hot dip galvanized pipe conforming to IS 1239 with GI thickness of 60p. Height of the frame is 2700mm. •Top pipe: SONB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. These SONB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60p. •Seat assembly : 1) Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain:Rubber dip molded swing chain of dia. 6mm & 1450mm Long. 3) Hook: S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat :Rubber Seat made by Natural Rubber with sufficient reinforcement. •Pipe l•1ateriaIs or Class: Light Duty ('A’ Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Bearing : Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material &CircIip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment Complete as per direction of Engineer Incharge.

Providing & Fixing of Simply Go Round Scrambler having Product Area : 1.5m Dia (5 ft Dia.). • Safe Play Area : 2.5m Dia (8.2ft Dia.) • Ideal For : 5-12Years • Friends at a time : 5-7. Railings : Railings which are designed conforming to EN 1176-1:1998 for standard grip requirement, are made from 25NB Galvanized Pipe conforming to IS 1239 with GI thickness of 60µ. Railing frame conforming to EN 1176-1:1998 for safety against entrapment of head & neck. The Frame (2 Nos.) are fixed to the HDPE sheet platform reinforced structure. Platform : High Density Polyethylene (HDPE) Platform Dia.1200, thickness 15 mm have high specific strength. Platform support frame : Frame bolted with HDPE Platform for its rigidity, made from 25 NB Cross pipe welded together to a 25NB Bend pipe to form a structural frame. Bearing assembly : Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2. Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The bearing assembly is fixed to the center support stand and the platform support frame assembly mounted over it. Center support : 80NB hot dip galvanized center support pipe of length 500mm conforming to IS 1239 with GI thickness of 60µ. This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. Pipes : All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. Pipe Materials or Class: Light Duty ('A' Class), Series of pipes only. Wall thickness of pipe varies according to class /series of pipe used. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galv All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Galvanized / S.S. / Allen Bolt / Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. Certificate: ISO9001:2015 Color: Colour as per image shown. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Complete as per direction of Engineer Incharge.