Supply and installation of Street Light from MIC kali mandir to Magazine house and replacement of damaged street light beside the coal depot, MIC, Jhanjra Project Colliery

Amount

Erection of single steel tubular pole of length as given with/without sole plate and cap etc. in CC |foundation

Supply at the work site of LED street light 12OW, 220V, make: syska/ Crompton/ Philips/Havels, with pressure die cast housing with toughened glass and individual LEDS secondary optics and IP66 protection.

Supply at work site of 2Cx10 sqmm Al conductor cable

Laying of one no. cable upto 35sqmm in ug trench 460mm wide x 760mm average depth with brick protection on top of the cable with 8nos. Of brick per mt. including filling the space between the brick and cable and also the trench with shifted soil, levelling up and restoring surface duly rammed.

Supply & installation on a suitable masonry plinth of street light control kiosk of size 900mmx750mmx450mm made of 14SWG MS sheet and comnprising the following: i) One set 63A(15kA) FP 4 pole MCCB. ii) One set suitable digital timer with 110A capacity 4 pole power contactor iii) One no. of toggle switch and one no. 2A capacity fuse. iv) suitable neutral bar etc

Supply & fixing of outdoor type dust and vermin proof 3ph pole box on the pole with necessary items andconnections. The box is made up of 2 mm thick CRCA sheet painted with powder coated paint through seven tank process

Earthing with 50mm dia Gl pipe 3.64mm thick x 3.04m long and 1x4 SWG GI wire 4m long, 13mm dia x 80mm long GI bolts, double nuts, double washer inc. and 15mm dia Gl pipe protection 1m iong to be filled with bitumen partly under theground level and partly above ground levei driven to an average depth of 3.65m below the ground level as below; by ISI medium Gl pipe.

Excavation of soil for installation of earth electrode & filling & ramming forsoft soil.

Supply & fixing compression type gland complete with brass gland, brass ring and rubber ring for dust and moisture proof entry of PVC armoured cable as below: 4core 16sq.mm

Finishing the end of following PVC armoured cables by crimping method including supplying and 15 fixing solderless socket, tape, anticorrosive paste and jointing material; 4C by 16sqmm

Supply at the work site 1100V grade 1.5sqmm FR PVC insulated single core unsheathed multi strand copper cable from pole box to light fitting

Drawl of 1100V grade 1.5sq.mmFR PVC insulated single core cable from pole box to light fitting.

Painting of steel tubular pole of lengths and no. of coats paint as given below with ready mixed paint/primer ofapproved make and brand including after preparation of surface by sand paper/ emery paper, cleaning etc. for receiving fresh coat of paint ,twO coat aluminium paint over tone coreof RO priming.

Total impact of GST for the purpose of CTC