Const. Boundry wall, male and female toilet and other work in Government Excise Bonded Warehouse campus Mainpuri.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of Soil.DSR.no.2.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10(1cement:coarse sand(zoneIII) derived from natural sources:10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR No.4.1.10

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3(1 cement:1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) as SI No.5.1.2

Centering and shuttering including strutting, propping etc. and removal of form : Foundation as per SI no.5.9.1

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3(1cement :1.5 coarse sand (zone-3rd) derived from natural sources :3graded stone aggregate 20 mm nominal size derived from natural sources) Above Plinth Lvl as SI No.5.2.2

Centering and shuttering including strutting, propping etc. and removal of form : Column as per SI.no.5.9.6

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). as per SI No.5.3

Centering and shuttering including strutting, propping etc. and removal of form : Beams as per SI.no.5.9.5

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in thermo-Mechanically Treated bars of grade Fe-500D or More.as per SI No.5.22 B.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 1:6 (1 cement : 6 coarse sand):. S.I. No. 6.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in.Cement mortar 1:6 (1 cement : 6 coarse sand) S.I.no.6.4.2

15mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.13..5.1

12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.13.4.1

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coats applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90ltr/sqm)).two coats.as per SI.no.13.46.1

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick DSR 5.9.20

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces DSR 10.5.1

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 13.50.3+13.62.1

Distempering with 1st quality acralic Distemper having VOC contant less than 50gm./ltr. two or more coat over and including prime coat with cement primer. DSR 13.41.1

20mm cement plaster in (1:4) c:c/sand etc all complete DSR 13.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 4.1.4

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31

Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41 S/F 110mm size pvc pipe ISI mark. 12.41.2

S/F of 75mm dia PVC pipe ISI mark. 12.41.1

S/F brass bib cock and stop cock including all complet. 15mm dia.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 17.7.2

S/F squating plate urinal basin of white glazed earthen ware including all complete.

S/F CPVC Pipe 25mm dia. DSR 8638

S/F CPVC Pipe 15mm dia. DSR 8636

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : DSR 17.2.1

S/F of 500 Ltr. PVC water tank etc all complete

S/F sing boad marbal stone etc all complet.

Please Enable Macros to View BoQ information

S/F squating plate urinal basin of white glazed earthen ware including all complete.