PROVN OF STORAGE ROOM AT P-7 (MANEKASHAW MARG), TOILET AT Q LAND OFFICE (HQDA), TOILET AND BATHROOM AT P-12 (MALL ROAD), FRP CHAJJA AT P-5 (POLO ROAD), RAIN PROTECTION SHED AT P-20 (CHURG ROAD) AND OFFRS MD ACCN P-22C (MANDIR MARG), ADDN/ALTN AT P-1

Amount

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavated matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M&L for PCC (1:4:8) ty D-2 (using 40mm graded stone aggregate) as foundation filling in mass concrete, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, footing ,posts, struts, piers, columns and stanchions, finished even and fair complete.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Dscription all as per item No 10 but but 8mm dia as in stirrups.

M&L for reinforced cement concrete M-25 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) as in Columns, pillars, piers, posts and struts etc. all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc. all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, chhajja,deck slabs and in shelves and the like etc. all as specified and directed.

Providing and applying the plaster with single component ready to use Polymer modified repair mortar capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area including taking down existing roof treatment of any type with cement plaster on brick/concrete surfaces, including raking out joints, haking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Smart Care (Asian Paints) or equivalent in Sika/ Fosroc/ Berger/ STP. Note : The application shall be executed on any type of surface and on horizontal/ Vertical areas.

Providing and applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: Smart Care Damp Proof of Asian Paints or equivalent in Berger and Nerolac). Notes:(1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M&L for APP based polymeric membrane with mineral granules on top surface, minimum weighting 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm with bitumen primer and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.6 kg/sqm at overlapping joints with a over lap of 75mm at the sides and 100 at the ends complete all as specified. Note: the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.” (Make- Asian/ STP/ IWL) Notes- 1. The Work Shall be executed through authorized applicator of manufacturer 2. Authorized applicator shall be approved by GE before starting of work 3. All material shall be procured directly

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

S & F for ceramic cool roof glazed Heat Resistant Terrace Tiles (300 mm x 300 mm x 10mm) on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, complete all as specified. Make Johnson/ Orient bell or equivalnt.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins,arches,pillars etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed

Demolition of cement concrete in ground floors of any description and in any position not otherwise specifically provided (un reinforced) complete all as specified.

Taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed.

M&L Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) Finishing cement concrete surface even and smooth Without using extra cement.

Taking down Cement Plaster on brick or stone walls, and concrete surfaces, ceiling and any position etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete.

M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on roof surfaces of brick work or concrete surfaces in CM 1:3 to be finished even and fair without using extra cement.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) ty B-0 using 12.5mm graded stone aggregate as demp proof course and applying Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sqm, complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation

M&L for 75mm thick plain cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified.

M&L for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm as in floor set, jointed and pointed with coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm as in floor set, jointed and pointed with coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified including dismantling and as directed by Engineer-in-Charge

M & L for glazed ceramic tiles in vertical surface of size 1200x600 mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Vitrified coloured tiles any shade 8-10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in cement mortar 1:6, complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface of size 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Glazed ceramic coloured tiles in vertical surface 600x300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in Skirting, Dados, etc., laid over 10mm thick rendering in CM 1:4 including disamntling of the same complete all as specified and directed.

M & L Vitrified ceramic tiles size 600mm x 600mm x 10 mm thick (square/ rectangular), (shade/ colour/ Design/ pattern as approved by GE) ,as in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 in floor including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M&L for vitrified Ceramic tile 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and dirtected by Engr-in-Charge

M & L Non-skid ceramic joint free tiles 8 to 10mm thick(square or rectangular) coloured joint free , area of each tiles exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 including dismantling of the same complete all as specified and directed

Description all as per item No 49 above as in in skirting and dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed

S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed..

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

Precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate, complete all as specified and directed. Make: Ritz/ Everest

S & F Mild Steel butt hinges 100mm long medium weight.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S & F aluminum handles, cast type, anodized 150mm long.

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed all as specified.

S & F Factory made UPVC White colour casement door made with 3D hings made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded duly reinforced with 1.6 + 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glaxing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hings and one hadle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frmae to fiished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded incluyding drilling of holes for fixing hadware's and draingae of water ets. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including 8mm toughened glass complete all as specified and directed by Engineer-in-Charge. Note: The unit rate quoted by contractor included all other connected accessories. Net opening will be measured or payment purpose and

S & F Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose and for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour frame 60 mm x 58 mm for fixed glass window/ opennings etc , made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including glazing bead 35 mm x 20 mm all as complete and as directed,( Note :- Glass shall be paid separately)

S & F 8 mm thick Toughned glass fixed as in doors, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid Prelaminated flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos 150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equvelent "

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Make 'Rajshree or equvelent "

Description all as per item no 63 above but wire mesh door shutter inlcuding wire mesh all as per specification

S&F anodised aluminium window and ventilator shutters with aluminum frame, with Powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing Sanp beading including provision of 5.5mm thick tinted glass of superior quality including suitable opning for exhaust fan and all standard fittings complete all as specified and as directed.

S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE )

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : including Glass / wiremesh/ partical board/ ACP board etc)

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, glass and wire mesh for panels complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made fully gauged PVC window/ventilator shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail(rate incl glass panes/gauges) complete all as specified and directed

M&L for applying Two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for preparation of new/ old plaster external wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty complete all as specified and as directed.

S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including two coat of OBD over a coat of putty including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc. complete all as specified and directed.

M & L for preparing newly plastered surfaces of wall/ Ceiling incl preparation of surfaces and applying two coats of Acrylic Emulsion over a coat of interior primer and 2-3mm wall care putty (JK or Birla) on wall surfaces complete as specified and directed.

Description all as per item no 75 above but in ceiling, complete as specified and directed.

M&L for preparation of newly plastered surface of walls/ celing and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

M & L for preparation of internal decorated brick/ concrete /plastered/un-plastered surfaces/pointing/un-pointing surface of walls, ceiling pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/ holes in surface filling with white putty etc and providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush complete all as specified and directed

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

Description all as per item No 80 above but 20 mm bore.

S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top),including 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball hoisted & fixed in position including all fittings complete all as specified and as directed.

S & F Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, P/S Trap including connection to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )

S&F fancy type chromium plated 15 mm dia Angle Valve/stop cock/angle cock/ angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union.

S&F PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.

S&F fancy type chromium plated bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule

S&F fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm with Brass CP coupling 32mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63.

S&F 15 mm dia brass chromium plated Single Lever central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair. (Make Jaquar Florentine FLR-CHR 5273UPR, Pearl GPR-884, Cera F1017401)

S&F of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F Hat and coat hooks, set of six, solid body of brass, 175mm to 250 mm complete all as specified and directed.

S&F brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in make of list as approved by GE

S & F 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Jaquar / Marc / Kohler )

S&F Brass chromium plated shower rose 200x200 mm with 600mm long Rod size all as specified and directed (Make: Jaquar/ Hindware/ Marc)

S&F Stainless steel grating 100mm dia with centre hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S & F full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed.

S&F Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S & F SS soap dish, complete all as specified and as directed. (Make - Jaquar/ Marc/ Kohler)

S&F CP health faucet with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in Marc/ Kohler)

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete. (Make: Jaquar/Marc/Kohler)

S&F corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd

S & F Vitreous China Urinal, full stall type Urinal inlcuding cp urinal spreader With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).

S&F Hubless CI pipes of 100 mm nominal diameter ( single socketed in any length with rubber ring joints and clamps including all fittings bend/socket and fixtures fixed on wall or in trenches or in floor complete all as specified and directed.

S&F Hubless CI pipes of 75 mm nominal diameter ( single socketed in any length with rubber ring joints and clamps including all fittings bend/tee/socket/cowl etc and fixtures fixed on wall or in trenches or in floor complete all as specified and directed.

S&F Hubless CI 100mm dia (single T) or unequal provided with access door complete all as specified and directed.

S&F 110 mm CI Hubless Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F 110 mm bore CI Hubless floor trap/Gully Trap including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any typeof soil, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-60 Grade inclduing 50mm sand bed with grey cement and no pigment complete all as specified and directed.

S & F 10 mm thick (toughened glass with frosted glass) of approved quality fixed in partation/door's/ Cubical for toilets/ Ventilators etc including necessary all stainless steel hardware fittings (As like frame , brackets , clits , jammers, stopers, handels etc) complete drilled for fixing with all fitting and fixture directed.

M & L for OUT DOOR coloured ceramic heavy duty tiles 10 to 15 mm thick (square/rectangular) area of each tiles n exceeding 0.16sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete tiles all as specified

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) laid in alternative panels,with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 using 40 mm aggregate, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws i complete all as specified and as directed.

S& F Mild Steel work in rafter , purlin, and other connected work including special shaped washer , nut bolt and plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts, complete all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

S&F toilet paper holder of of brass, chromium plated fixed to walls with chromium plated(CP) brass screws

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia pipe.

S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L of factory made Fiberglass Reinforced Plastics (FRP) “CHAJJA” of “Fibreways” brand or equivalent 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos. vertically and 1 no. horizontally 50x2mm thick M.S. Flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete using silicon sealant from top and bottom to make it waterproof in one single piece casted monolithically including all necessary fittings complete all as specified and directed The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS: 11551, complete with protective Gelcoat UV coating on top for complete resistance from the extreme of temperature, weather & sunlight complete all as specified and directed. Note: All fittings/fixtures including in above quote rates.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall including tee/Sockedt/bend as required completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of exisiitng sheet complete all as specified

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap/P-trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S & F HPL Sheet exterior glossy ( colour & design as approved by GE) of 6 mm thick joint with Silicon/ adhesive as per manufacturer instruction including necessary aluminium framed work as required shape and size by welding etc fixing to wall / ceiling/ Slabs/RCC column/boarding/Gates/ Name Plates on gates with necessary fixing arrangements upto a height of 10 Mtrs complete all as specified and as directed.

S & F for Stone wall cladding tiles of size 300mm x 600mmx 8-12mm thick on vertical surfaces of wall , such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick backing coat in CM 1:4 and as per sample approved by GE complete all as specified and as directed.

M&L Virified Ceramic tiles double charge homogenous in light shade /dark shade 15 mm thick (square/rectangular) polished) , area of each tiles 2400 x800mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L 12 mm thick white color GRG (Glass Fibre Reinforced Gypsum) Semi Perforated false Ceiling Tiles, Micro Tegular & Tegular edged, Size 595mm X 595mm, Fire Resistance BS-476-4:1970 (Certified), Humidity Resistance (RH) (Certified),including necessary GI frame/ GI T , cross , wall angle etc false ceiling grid (Ceiling Suspension System) in High Quality Zinc Coated Galvanized Iron with Pre Painted Hot Pressed White G I Coil. including centre to centre Hangers 6 mm dia. G.I. rod fully threaded (upto 1000mm long) fixed to roof slabs with galvanised M-6 desh fastener 50 mm long including galvanised MS L-type level adjuster 85 x 25 x 25 x 2 mm etc.inlcuding taking down of the same completed all as specified and directed. Note- Black & Silohueete System (Make : - Diamond ceiling and equivalent as approved by GE)

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

M&L for laminated wooden flooring size 1200mm x 192mm x 8mm thick interlocked, fixed on polythene film and 10mm thick foam on floor and in skirting complete all as specified (Colour and design as approved by the GE)

S&F fixed in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as specified and directed

S&Ffor PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as specified and directed

S&F for PVC (SWR) 110mm bore (dia), Bends any type, with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and directed

S&F for PVC (SWR) 75mm bore (dia), Bends any type, and Jointing with Solvent Cement, complete all as specified and as directed.

S&F for PVC (SWR) 75mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and directed.

M & L for two coat of floor paint on any type of surface including preparation of new/old surface make ;- Indigo floor paint and or equivalent as approved by GE) complete all as specified and directed.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly including concealed conduit pipe and modular box covered with modular plate (top cover) for mounting modular switches, sockets or fan regulators etc for one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.complete all as specified and as directed.

Description all as per item No.150 herein before but one socket outlet point 5 amps on the same board.

Description all as per item No. 150 herein before but one socket outet point 5 amps on the independent board.

Description all as per srl item no. 150 here-in-before but with 2.5 sqmm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

Description all as per item No 150 here-in-before but with 4 sqmm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F modular switch flush type, 6 amps one way, SP, 230 volts AC all as directed. Make- Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent.

S&F modular socket outlet 6 amps 5 pin 2 module all as directed. Make- Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent.

S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed. Make- Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed. Make- Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent.

S&F modular Step Fan regulator, 120 watts single / double module all as directed. Make- Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent.

S & F of Ceiling rose, 3 terminal , PVC /polycabonate, isulated body all as specified and directed.

M&L of submain wiring complete with 2 x4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x4Sqmm (same specification) as earth wire drawn in 25mm dia PVC concealed conduit with all fittings, complete all as specified and as directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.

Supply and fixing of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

S&F of LED Bed Side Flexible Arm lamp 5/6 W complete all as specified and directed.

S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient),1400 mm (as directed by Engineer-in-charge) BLDC Remote controlled suitable for regulator, voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades. The fan shall have BEE 5 star rating and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan and service value more than 7.1 minimum air delivery 255 cmm and the fan shall have CA no. and MES office details as provided by Engineer-in-charge i.e."Military Engineer service, AGE(E/M), GE (East) Delhi Cantt, CA no........".Permanently embosed on the side of the fan facing the ceiling complete all as specified and directed. Make-Havells/ Atomberg/ Crompton and Goldmedal.

S&F of Ventilating fan 200 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F of MCB C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.

S&F of MCB SPN B Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed.

S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 63 Amps complete all as specified and directed.

S&F electric water heater of capacity 25 Litre, verticvale storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc, complete all as specifed and as directed.

Supply and fixing of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

S&F of Modular TV socket) 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.

M&L of Modular Telephone socket Jack 01 Module size (RJ 11 Socket Jack) complete with modular sheet as per site requirement complete all as directed by the Engr-In-Charge.

M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in and including separate concealed PVC conduit complete all as directed.

M&L of telephone Wiring with twin core PVC insulated, PVC sheathed cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in and including separate concealed PVC conduit complete all as specified and directed.

S & F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting all as specified.Make-SSK/Cona/Havells or equivalent

S&F in replacement of LED Flood light 170 Watt white focus , super strong metal body & handle, high lumens energy efficient IP 67 led light complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 36 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed

S & F ABS Plastic Automatic Hand Dryer (white standarad ) Power-1200W, Speed-1200 RPM ,Voltage-220V ,IPX1,complete all as specified and directed.

S&F metalic box for single phase prepaid meter with door glass incl. all type of fixing accessories etc complete all as specified & as directed.

S&F Static Energy Meter three phase electronic type with LCD display of capacity 10-60Amp including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard. complete all as specified and as directed

Supply and fixing of wall light fitting with and incl 9 watt LED lamp complete all as directed. Make :- Cat part No - Li-3614/1W Lustre Illuminations .

S&F insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

Supply and fix Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed. Make-Euroforce or equivalent.

S&F of instant heating Geyser 03 liter capacity vertical type with steel tank and glass inner linen complete including fasteners (02 No) for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as specified and as directed.

Supply and fix, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core all as per IS , all as specified & directed.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Supply and fixing submain wiring complete with 2 x 10.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.

Supply and fixing wall light fitting comet type with 9 watt LED lamp with and including all electric connections complete all as directed.

Supply and fixing LED ceiling light fitting 10 watt, in round shape, surface/recessed type and making all electric connections complete all as directed.

Supply and fixing of decorative Bollard gate light suitable for 8 W LED suitable for garden light fitting incl nut, bolt, washers for fixing and necessary electric connections, PCC 1:3:6 foundation complete all as directed. Make: Havells/ Philips/ Crompton/

S&F recess /surface mounting 600x600mm square flat panel ultra slim scoop LED light 36w warm/cool white with driver/transformer etc suitable for grid ceiling /gypsum board/POP ceiling incl making electric connection complete as directed.

S&F in replacement of LED garden light fittings with B22 LED Lamp, height of light 900 mm suitable for pathway lights including making base of PCC 1:2:4 (45 x 45 cm) with dixing fastner, nut, bolts in PCC from ground level and making good electric connections, complete all as specified and as directed. Make : Cat part No Li-8113 Lustre illuminations.

S&F in replacement of picture light of 12 watts, 450/600 mm kebgth metal body suitable for focus on Name plates/ paintings, complete all as specified and as directed.

Taking down water heater (Geyser) 25 ltre capacity and depositing to MES store yard, complete all as specified and as directed.

S&F of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted/ concealed and making good the surface all as specified and as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement MCCB 3 Pole, 63 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard.

S&F in replacement cable PVC insulated copper conductor two core PVC sheathed circular 6 Sqmm for electrification in Garden lights, gate light etc. complete all as specified and as directed.

THE LOTUS BUILDTECH (BID ID -3508969)

Gaurav India Corporations (BID ID -3509587)

sunil traders (BID ID -3509337)