Construction of G 2 Reading library at Kusum Vihar Morabadi Ranchi under RMC Area

Labour for cleaning the work site before and after work etc.

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil Item B)

Excavation in ordinary rock with Dozer with lead upto 1000 metres Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.

Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)

centering and shuttering including strutting, propping etc. and removal of form for: Foundation.footing,bases of centering and shuttering including strutting, propping etc. and removal of form for:coloumn etc. for mass concrete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:

Centering and shuttring ciuding,propping etc and removal of from for Isuspended floors,roofs,landigs,balconyes,and acess Iplatform

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm

centering and shuttering including strutting, propping etc. and removal of form for:Lintels,beams,plinth beams girders,bressumers and cantilevers

centering and shuttering including strutting, propping etc. and removal of form for:Columns,pillars,piers,abutments,post and struts

Centering end shuttring incuding,propping etc and removal of from for Stairs,(excluding landings)excepts spiral staircases

Centering and shuttring incuding,propplng etc and removal of fmm for Weather shade, Chajjas, corbels etc., Including edRes

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 8 mm dia bar(TMTC-500)

10 mm dia bar (TMTC-500)

12 mm dia bar (TMTC-500)

16 mm dia bar (TMTC Fe-500)

20 mm dia bar (TMTC Fe-500)

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible

Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm

Providing and mixing Liquid Intergral water proofing compound in Conctrete or plaster as per manufacturer specification and as per direction of Eng - in Charge. Brand- Sika Plastocrate plus,

Providing and fixing c:ircular/ Hexagonal cast Iron or M.S. sheet box for ceiijng fan clamp of internal dia ·140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means ,:,f 3.3mmdia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

Providing and fixing tactory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed With self driven self tapping screws of size 38 mrn x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manllfacturer's specification and direction of Engineer-in-<:harge.

Providing and fixing factory made 30 mm thick door shutter m<1de of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hingo side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four cornEtl'S of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mrn with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvont cement & self driven self lapping screws cf size 100mm x 8 mm complete as per m-anufacturer's specifications and direction of •

Providing and fixing aluminium work for doors, windows, ven1ilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, flXing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gauket etc. AluminiumPowder coated aluminium (minimum thickness of powder coating 50 micron sections shall be smooth. rust free, straight, mitred and jointed mochanically wherever required including cle-at angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steE,I screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fateners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanicaUy wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing paneling and dash fasteners to be paid for separately)For fixed portion Anodised aluminium (anodised transparent or dyed!;) required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron

Providing and fixing reflective glazing in windows with 5mm thick of ST-167-sparkllng Ice/ or Equevalant with EPDM rubber / neoprene gasket ate. all cost complete as per architectural drawing and the direction of E/I.

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing and fixing ,tainless steel ( Grade 304) railing made of Hollow tubes, channels , plates etc., including welding, grindlng, buffing, polishing ancl making curvature (wherever required) 1ind fitting the same with necessary stainless i.teel nuts llfld bolts complete, i/c fixing the railing with necessary accessories & atainle6S steel dB.Sh fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable ammgement as per approval of Engineer-·in--cllarge, ( for payment purpose only weight of stainl86S steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

providing and fixing stainless steel(grade304) railing made of hollow tube, channel, plates etc, Inclaluding welding, griding, buffing, polishing and making curvature(wherever required)and fiting the same with necessary stainlesssteel nuts and bolts complete,i/c fixing the ralllag with necessary accessories&stainless steel dash fasteners, stainless steel bolt etc of required she, on the top of the floor or the side of walst slab with suitable arrangment as per approvel of E/! 2KG/FT

providing and fixing stainless steel(grade304) railing made of hollow tube, channel, plates etc, Inclaluding welding, griding, buffing, polishing and making curvature(wherever required)and fiting the same with necessary stainlesssteel nuts and bolts complete,i/c fixing the ralllag with necessary accessories&stainless steel dash fasteners, stainless steel bolt etc of required she, on the top of the floor or the side of walst slab with suitable arrangment as per approvel of E/! 2KG/FT

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15822, o:f approved make, in all colours & shade, in skirting, riser of stepu, over 12 mm thick bed of cement mortar 1:3 (1 cement 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1s1 quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by manufacturer),of approved make,in all colours ,shades except burgundy,bottle green,black of any size as approved by engineer in charge ,in skirting ,riser of steps and dados ,over 12 mm thick bed of cement mortar 1:3(1cement:3 coarse sand)and jointing with grey cement sulury @3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang Saw cut, mirror polished, premouled and prepolished, machine cut for knchen platforms, vanity couiters, window sils., facias and similar locations of raqured size,approved shade, colcour and texture laid over 20 mm thick bese-cernent mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment epoxy touch ups including rubbing,curing moulding and Raj Nagar Plain white marble/ Udaipur green -ma-rble( Zebra black marble Aread slab over .50mm)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windowsills, factas and strailar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20 mm nominal size)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepa,re._the surface even and smooth complete

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thicl:ness 1 mm, of approved brand and manufacturer, over the plastered wall surfac13 to prepare the surface even and smooth complete.

Finishing walls with extured exterior paint of required shade : New work (Two or more coats applied@ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10sqm

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Making Plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm diameter (for rain water)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door-110x110x110 mm

Bend 87.5° -110mm bend

Providing and fixing ro the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing unplasticised - PVC pipe clips of approved design to unp1asticised - PVC rain water pipes by means of 50x50x50 mm hard wood pigs, screwed v.ith M.S.screws o1 required length incluamg cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Clearing jungle including uprooting of rank vegetation, grass, brush wood. trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside nearby of area cleared.

Providing and laying 80 mm Thick factory made Cement Concrete paver block of M-45 grade made by block making Machine with strong vibretory compaction of approve size,design and shape ,laid in rerequired collour and pattern over bed as per revalent IRC Code ,filling the joints with fine sand etc all complete as per direction of Engineer -in -Charge.

Provicing and Fixing factory made uPVC door frame, made of uPVC vertical of the fnimes with PVC profile of Size 28 mm x 30 mmhallifll wall 1hickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm loog stainless steel hinges to the frame, fixing the frame with jamb with raqured number & size of anchor dash fastner.s, al complete.as per manufacturer's specification and direction of Engineer-in-charge axlurded sections, of size 65 mm x 55 mm with wall1hiclmess 2.0 mm (± 0.2 mm), corner; of the door frame to be mitred cut and jointed with plastic brackets and stainess sl'eel saews reinforcing hlnge side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Providing and fixingglazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kol saml

Provideing & Fixing Aluminum Composit Panel of apporoved manufacture I taxture with the folowing specification:- Structure· Aluminum Section, Main Mullian : 38 mm x 25mm x 1.4 mm, ACP - Thickness 4.5 mm, Accessories : Silicon Dow Coring 789 Joints Leader or Equevalant,Fastners Hiliti /Fischer, Bracket: 50 x 50 x 4 mm, Miskine tape: all angle M.S. angle, spacer tape & stainless steel screw of slandered co. all cost complete as per spefication ancidirection to E/I

Providing and Displaying Standard Rose {H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in- Charge

Point Wiring in PVC Conduit, with Modular type Switch, Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc. as required.

Wiring for twin control light point with 1.5sqmm FRLS PVC insulted copper conducter single core cable in surface /recessed medium class PVC conduit ,2 way modular switch,modular plate ,suitable GI box and earthing the point with 1.5sqmm FRLS PVC insulated copper conducter single core cable

Power Plug Wiring in PVC conduit (2x4 sq mm): Wiring for light/power plug with 2x4 sq.mm FR PVC Insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Make-Havells/ Polycab KEI/Finolex/KEC

Supply and Fixing Light Plug Point with Modular Type Accessories : Supply and Fixing GI Box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc. as required.

S/F light plug polnt with modular type accessories:- Supply and Fixlng GI box with modular plate and cover in front on surface or in recess including providing and fixing6 pin, 15/16 amos modular socket outlet and 15/16 amps modular type switch, connection, painting etc as

Supply & fixing 25A SPN f•gCB Ertdustrlal Socket Outlet: Supply and fixing of 25A, 240V, SPN insusCrtal type socket outlet with 2 poles and earth, metal enclosed plug top alonq with 25 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connectons, testing and commissioning etc as required. (For split / window AC points).

Circuit/Sub-main wiring in PVC Conduit:- Wiring tar circuit , sub main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cabte in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sqmm earth mire (for Single Separate 6A) (Circuit shall be taken from

2x2.5 Sqmm + 1x2.5 sq mm earth wire (for switch board circuit and 3 Nos. 6A sockets for 1 AN 1

2x6.0 5a.mm + 1x6.0 Sq.mm earth wire.(for 20 AbSP industrial Socket)

4x6 Sq.mm + 2x6 Sq. mm earth wire. (to be used for TPN Essential DB & LIPS DB Sub-Nain)

4x10 Sq.mm + 2x10 Sq.mm earth wire. (to be used for TPN Normal DB Sub-Main).

S/F Modular blanking plate:- Supplying and fixing of the existing modular plate and switch box excluding modular plate etc, as required.

SF TP MCB DB: Supplying and fixing following way, three pole and neutral sheet MCB distribution board, 415 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, pnosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR). 4 Way (4+12), Oouble Door (horizontal Type).

4 Way (4+24), Oouble Door (horizontal Type).

S/F 'C' series MCB: Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing NCB DB complete with connections,testing and commissioning etc, as required. 6/32A Single Pole

S/P flodular type electronic fan regulator: Supplying and fixing stepped (two module) type Plate etc as required. fan regulator on the existing modular plate switch box including connections but excluding modular

G/F Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten / Angte Holders Supplying and fixing batten / angle holder including connection

S/F Electronic musical Call Bell:- Supplying and fixing of electronic musical call beli suitable for D.C./A.C. single phase 230 Volts, complete as required

S/F Electronic musical Call Bell:- Supplying and fixing of electronic musical call beli suitable for D.C./A.C. single phase 230 Volts, complete as required

Numbering of fan / fittings:- Numbering of ceiling fan/ exhaust fan / fluorescent fittings as required

ITC Ceiling Fan tnstallation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 Cm) with 1.5 sq. mm. FRPVC insuIated,copper conducter,singie core cable etc, as required.

Fixing louvers / shutters for exhaust fan:-Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

S/F PVC Conduit: 'Supplying and fixing of following sizes of PVC conduit alongwith the following sizes of PVC conduit alongwith the the wall and making good the same in case of recessed conduit as required for Tele, RJ4S Cat 6 data outlet for computer network. 25 mm

S/F Stodular type Switch / Socket: Supplying and fixtng following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. Teleohone socket outlet

5/6 amos gne wav Swish I 500x3= 1SOON

5/6 amps 3 pin socket out let (500x3= 1500)

S/F Modular boxes, base & cover plata:-Suppbox along with modular base & cover plate for modular switches in recess etc. as required.Iy'inq and Fixing followinq size / modules G.I. 4/5 module

8/9 module

Supplying of following fans & Light fittings with high frequency, electronic Ballast with THO< 10 % starter, control gears, lamps holder, power factor 0.99 for fluorscent lamp & 0.95 for CFL for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. Supply 12W led light in existing batten/angle holder. (Make :- Philips/ Bajaj /Wipro).

Supply of surfaced pendent mounted fluorscent tube light luminaries with 10/ 12W LedTube II9ht with all accessories as per the standard Catlogue Items. (Make : - Philips - TI•tS1Z2N-TL-5- 1X28WEBE/ 8djaj-BTIR128/ Wipro WIF 20128)

Supply of surface/ pendent mounted fluorscent tube light luminaries with 10/12W LedTube light with all accessories as per the standard Catlogue Items. (Make :- Philips - TMS122M-TL-5-1X28WEBE/ Bajaj-BTIR128/ Wipro WIF 20128)

Supply, fitting, fixing and testing of Special type bulk head Die-cast cast aluminium alloy body heat resistant prismatic glass cover, with specially designed gasket, complete set with lOOW GLS ES lamp. (Make- Philips- NXClOl I Bajaj-BJDB lOOES /Wipro WKG13.)

Providing & fixing of holder type LED Bulb 15/16 WATT

Supply, fitting, fixing and testing of Special type bulk head Dle-cast cast aluminium aIIoY body heat reslstant prismatic glass cover, with specially designed gasket, complete set with 100W GLS ES lamp. tNake- Philips- NXC101 / BaJaj-B4DB 1ß0ES /Wipro WKG13.)

45/48 LED Street Light

Supply of l40Omm Sweep, double ball-bear Ing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required. Nake : - Bajaj 250104 / Crompton WW HE-WQR / I-lavells Velocity.

Supply of Wall Fan 4OOmm 230V heavy duty with meta! blade along with front metal net, revolving , regulator system and proper stand. Nake: - Bajaj 60014 / Crompton WMSDX 120 /

Supply of of AC 230/250 Volts, 50Hz,23Omm sweep Fresh Air Fans including providing nuts-bolts, mounting frame and other required accessories etc. (For toilets) Make:- Bajaj 70002/Crompton Trans Air 9"-Reversible / Havells Ventil Air-DB .

Supply of AC 230/250 Volts, 50Hz, 3OOmm sweep/9oo rpm Exhaust Naavy Duty Fans (Double Ball) including providing nuts- bolts, mounting frame and other required accessories etc. Iqake- uavelts-Turbo Force / Bajaj-70069 ,/ Crompton Greaves EXHD300-4-1

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. 580mm long - With 12.5 Liter Low Level P.V.C. costern 580mm long - With 12.5 Liter Low Level P.V.C. costern

Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindl stop cock approved quality of weight not less than 30 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware indian squating type 600 x 350 mm urinal plate of Parry Hindustan or any other I.S.S. approved make with internal flushing rim 100 mm white glazed earthen ware channel about 1m long 5litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings C.I. or R.S. brackets 15 mm & 45 cm long P.V.C. alkathene pipe standard G.I. flush pipe for back and front with spreader fitting and brass coupling etc. 15mm C.I. body brass spindle stop cock weight not less than 450 grms. all complete including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.

Providing and fixing stainless steel Jali (grating)with hole for Waste pipe for floor/nahani trap: 110 mm dia Weight not less than 100 gms.

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. (A)flat back or standard corner (450 mmx 350mm)

Providing and fixing gun metal full way valve of approved quality, all complete as per specification and direction of E/I 20 mm dia

25 mm dia

32 mm dia

Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .

Supplying ,fitting and fixing bathroom fittings of approved make and as per IS Specification all cost as per direction E/I. Pillar Cock (Long Neck)

Bib Cock (Long Thread)

Angular stop Cock LT

Glass self

Flush Valve complete with 32 mm size control cock & flange

32 mm dia PVC Waste Pipe 750mm long with cushion

providing solvent cement

Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror 600x450 mm

C.P brass towel rail 20 mm x 600 mm with bracket container

C.P brass shop dish container medium quality with screw and hinges etc.

Providing and Fixing 15mm dia and45cm long PVC connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of engineer in charge.

Supplying, materials and labour for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.L cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of Ell.

Septik Tank

Poviding and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

External Work40 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Constructing brick masonary road gully chamber 50x45x60 cm with bricks of ctass designation 75 in cement mortar 1:4 (1 cement :4 coarse sand ) including 500x450 mm precast RCC horizontal grating with frame complete as per standard 1desian with common burnt clay F.P.S.(non module) brick of class designation 7.5

tass designation 75 in cement mortar 1:4 (1 cement :4 coarse sand ) including 500x450 mm precast RCC horizontal grating with frame complete as per standard with common burnt clay F.P.S.(non module) brick of class designation 7.5

Making soak pit 2.5M diameter 3 mtr. deep with 45X45cm dry brick honey comb shaft with brciks of class designation 75 and S.W. drain pipe 100mm diamter 1.8 mtr. long complete as per standard design with FPS bricks

Supplying and fixing fitting of approved make confirming to IS :1729 including supplying nails and bobbins ,fixing solution including earth work or masonory work cutting and remaking and provididingas the casemay be all complete as per specifcation and direction of E/I. Slotted cowl (terminal guard) 100 mm dia

100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet

Rubber insertions for 100 mm dia pipe joints

S.C.I. door pieces 100 mm dia

Providing and laying 25mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Supplying all materials, labours and tools and equipment for drilling 200 X 165mm dia. X 125 Mtr. bore well in all kinds of soil and rock in urban area for installation of pumps set with Hydraulic DTH Rig Machine, all complete including drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transporation of rig machine and over vehicles up to the site etc. all complete job as per specification and direction of E/lc. From 0-50 Meter

From 51-125 Meter

Supplying all tools, tackles & lowering of 200mm dia. MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc. all complete job as per specification and direction of E/lc.

Supplying all materials: labours, tools & equipments for fiting & fixing 200mm dia MS cap over casing pipe etc. all completes job.

Cleaning flushing and developing of drilled hole for testing the discharge of water development of bore well by continuous flow of water by using heavy compressor up to satisfaction of E/l. to get uninterrupted flow of water free from sand and soil etc.

Supplying of 150mm dia 03.00 H.P. (ISI Mark) KSB/Kirlosker/CRI/V-guard Submersible Motor Pump sets comfirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50Hz, A.C. supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non returned valve shall be provided with pump. 3 meter submersible copper in single/double run shall be provided with each pump.(up to 20 stages) Supply rate should be increased by Rs 200/-per stage for pump with more than 20 stages.

FR PVC insulated 3 core 4 sq. mm. copper wire

Supplying of 32mm Submersible Pipe of standard make Ashirwad/Raksha/Prince/Gupta or any equivalent make for above requirement.

Supplying of 02 Nos. clamp, Band, Adopter, Bore Cover etc. as required for above work.

Supplying & Providing Rope of required size & tape.

Supplying & Fixing of BCH Make or Equivalent Panel Board with all accessories & Iron Box with Angle Stand and its fixing as per direction of E/l.

Installation Charges for Lowering of Motor Pump.

Supplying and of 10.0sq.mm Alluminium cable ISI mark as per specification and direction of E/l. (for connection from main line to electric Meter.

Sand (Lead Upto 42 km)

Local Sand (Lead 18 KM)

Stone Chips (Lead 15KM)

Bricks 08 KM

Good & Service Tax (GST)

Labour Cess

Please Enable Macros to View BoQ information