Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.6 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹37.6 L+₹1.6 L (4.39%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹37.7 L+₹1.7 L (4.75%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹38.0 L+₹2.0 L (5.53%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹38.2 L+₹2.2 L (6.12%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹31.5 L
EMD Value
₹63,080
Closing Date
3 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN-913867
SPL REPAIR TO BLDG NO T 147(A) AND T 25 AND ADDN/ALTN TO ENTRANCE GATE AND KITCHEN AT BLDG NO 527 AT KALIMPONG UNDER GE 867 EWS
2023_MES_589116_1
GE/867/TOKEN/04 OF 2023-2024
Open Tender
Civil Works
Item Wise
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹63,080
17 May 2023
12 Apr 2023
5 May 2023
12 Apr 2023
3 May 2023
26 Apr 2023
12 Apr 2023 - 24 Apr 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof all as specified and directed by Engr-in-Charge
S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.
Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position (unframed work) complete all as specified and directed.
S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)
M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips of colour teak/wood gradin/malamine finish fixed in and including GI frame work of size 605x605 mm, for seamless ceiling comprising of GI perimeter chanel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.50mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engineer-in-Charge (Make Duraplast or equivalent approved by GE)
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Engr-in-Charge.
Dismantling Brickwork or stone/ boulder masonry, for portions ordered to be dismantled , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.
M & L Modular bricks in cement mortar with fly ash bricks, straight or curved on plan exc 6m mean radius , setting in CM 1:6 Complete all as specifed and directed by Engr- in charge.
M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete sur face, in cement mortar 1:6 on , rendering finished fair and even complete complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
Supply only integral water proofing compond all as specified and as directed.
M&L preparation of new plastered or unplastered surfaces of walls, applying two coats of oil emulsion distemper over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering over 1mm thick wall care putty on wall, complete all as specified and directed.
M&L complete removal existing treatment and applying two coats of oil emulsion distemper over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering over 1mm thick wall care putty on wall, complete all as specified and directed.
M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 2mm thick wall care putty on wall complete all as specified and directed.
M&L complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including 2mm thick wall care putty on wall complete all as specified and directed.
M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L for two coats of old bound distemper over a coat of priming coat on newly prepared wall surfaces, including 3 mm thick layer of wall care putty (Birla white or equivalent) all as specified and directed.
M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint including one coat of exterior wall care putty complete all as specified and directed.
M&L scrapping existing treatment on walls & completely removing and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint including one coat of exterior wall care putty complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed.
M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/450x300x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including including 15mm thick rendering in CM (1:3) complete all as specified and as directed.
M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engr - in - Charge.
All as per item ser No 30 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:3) all as specified and directed by Engr-in-Charge
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engr-in-Charge
M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick rendering in CM (1:3) finished even and rough all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level all as specified and directed by Engr-in-Charge
M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed by engr -in-charge.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Add or deduct extra for forming fair finished , for each 25 mm girth or part thereof over or under 30cm ditto, complete all as specifed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) asin lintels upto 1.5m clear span,cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, hold fast, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified.
S&F 35 mm thick (batten thickness) Glazed and skeleton shutters using second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.
S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) complete all as specified.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after Resecuring or easing & adjusting complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in clause 8.B.2 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.
S&F steel window or ventilator fixed type with glazing bar complete complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engr-in-Charge
S & F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.
S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.
S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed
S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F 150 mm size Aluminium handles, cast type, anodised and all as specified and directed.
S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.
S & F in repair 18/19mm thick , Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, complete all as specified and directed.
M&L for Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18/19 mm thick particle board faces all as specified and directed.
S & F in repair for 12 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails fixed in repair complete all as specified and directed.
M&L for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 12 mm thick particle board faces complete all as specified.
S&F in repair of small fittings such as brackets of any type latch and hinge block, shaped door window stops and the like in second class hard wood article not exc 200 cu, cm each complete all as specified and directed.
S&F of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed.
S&F 125 mm size Aluminium handles, cast type, anodised and all as specified and directed.
S&F of 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint ,complete all as specified and directed.
M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repair of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white fixed in repair (excluding flushing cistern and flush pipe) incl Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with recessed bottom complete all as specified..
S&F in repairs vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed
S & F in repair pillar tap Fancy Type cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes all as specified and directed.
S & F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union to waste pipe;upto 0.5 sqm each, overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified and directed.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm®, complete all as specified and directed.
S & F Waste fittings 40mm , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
S&F 32 mm dia Waste fittings (Waste cuppling), brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed.
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.
S&F in repair Toilet paper holder with flat recessed type stainless steel or brass, chromium plated fixed to walls with chromium plated (CP) brass screws, completed all as specifed .
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed by Engr-in-Charge
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified and directed.
S&F for GI tubes medium grade, 15mm bore, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down steel tubing and connections, cleaning for refixing or removal to store etc complete all as specified and directed.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.
Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.
S&F in repair Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair 15 mm bore stop valve fancy type, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, bib taps, 15mm, fency type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed comple all as specified and directed.
S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S & F SWG gully trap size 150 x 150 mm square or round mounted type ‘S’, setting and jointed with solvent cement complete all as specified.
Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.
S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F of 110mm bore PVC (SWR) Vent cowl complete all as specified and directed by Engr - In- Charge.
S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.
S & F of 110mm bore PVC (SWR) bends complete all as specified and directed by Engr - In- Charge.
S & F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.
S & F of 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position or in pipe etc. complete in all respect as specified.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for 75mm thick Cement concrete (PCC) (1:3:6) (40mm graded aggregate) Type C2 of as in sub base complete all as specified.
M & L for screed bed or bedding layer in Cement Mortar (1:6) of 20mm thick for laying floor finishes complete all as specified and directed by Engr - in- Charge.
M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry with pigment complete all as specified and directed by Engr - in - Charge.
S & F in repair vitreous China Urinal, Half stall type, Fixing only in new work or refixing in old, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (20 mm graded aggregate) as in Chajjas and the like complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (12.5 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (12.5 mm graded aggregate) as in Columns, pillars, piers, posts and struts and the like complete all as specified and directed.
Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),rough finished surfaces on flat surface complete all as specified and directed.
Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces on flat surface complete all as specified and directed.
Use and waste Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, essummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.rough finished surfaces on flat surface, completed all as specified and directed.
Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces on Square rectangular on plain or polygonal, completed all as specified and directed.
Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5cm but not exc. 10cm wide and fair surfaces of finished concrete surfaces all as specified and directed.
S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
Excavation in trenches, nexc 1.5 m wide and nexc 1.5 m in depth, for foundation,etc or for shafts,wells ,cesspits,manholes,pier holes etc or LT cable/pole foundtion nexc 10 sqm on plan and iexc 1.5 m in depth and getting out in soft soil all as specified and directed.
M&L for PCC type D2 1:4:8 (40 mm graded aggregate) in foundation,filling and mass concrete all as specified and directed.
M&L for RCC (1:1.5:3) (20 mm graded aggregates) in foundation,including,rafts,footing,foundation beams,plinth beams, bases for columns,etc basement slabs under reamed piles and mass concrete all as specified and directed by Engr-In-Charge.
M&L for RCC (1:1.5:3) (20 mm graded aggregates) in column,pillars,piers,posts and struts all as specified and directed by Engr-In-charge.
M&L for formwork to sides of concrete footings bases of columns all as specified and directed.
S&F 1st class hardwood 20 mm thick in planed one side and edges tongued and grooved or rebated all as specified and directed by engr in charge.
M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161*-1979 grade St.240 all as specified and directed by engr in charge.
M&L 2nd Class Hard wood plain fillets, square rectangular in section , clean sawn , secured with nails or brads cross section exc. 6 Sqcm & nexc. 13 Sqcm complete all as specified.
S&F plywood 12mm thick grade, BWR type BB, fixed with iron/timber frame work all as specified and directed by engr in charge.
M&L for second class hard wood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed all as specified and directed by engr in charge.
Preparing surfaces of wood and wood based materials,steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint all as specified and directed by engr in charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories all as specified and directed
M&L for 180mm dia half round PVC ( heavy grade) eaves gutter made of PRINCE List code -RW0212/042017 or equvalent as approved by GE.
S&F PVC stop end outlet with one clamp for 180mm dia half round valley gutter pipes complete all as specified and directed by Engineer-in-Charge.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.
Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.
Returning, filling in, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer all as specified and directed.
Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified.
M&L Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick all as specified and directed.
S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clams with bolts nuts and wasers complete all as specified and directed.
M&L FOR Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish complete all as specified and directed.
Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.
Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.
Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch complete all as specified and directed..
All as per Item No-156 but One fan/ Exhaust fan point controlled by one switch all as specified and directed.
All as per Item No-156 but One bell point controlled by one switch all as specified and directed.
All as per Item No-156 but One 3 pin socket outlet 5 Amps on the same board complete all as specified and directed.
All as per Item No-156 but One 3 pin socket outlet. 5 Amps on the independent board all as specified and directed.
All as per Item No-156 but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire all as specified and directed.
All as per Item No-156 but One 15 A socket outlet independent with 4.00 sqmm PVC cable and 1.5 sqmm cable as earth continiuity wire all as specified and directed.
All as per Item No-156 but One 15 A socket outlet same board with 2.5 sqmm PVC cable and 1.5 sqmm cable as earth continiuity wire all as specified and directed.
Supply anf fix single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole 20 amp MCB all as speciied and directed
Ceiling rose, 3 terminal, PVC / Polycarbonate insulated body all as speciied and directed
Supply and fix switch piano flush type single pole one way 5 Amps complete all as speciied and directed
Supply and fix Bell push button 5 Amp, flush type complete all as speciied and directed
Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.
M & L for switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.
M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.
Dismantling the 15 Amps switch socket combination from existing place and refixing the same in another place including electric connection all as specified and as directed.
Dismantling the tube light fitting 4 feet long form existing place and Refixing the same in another place including electric connection all as specified and as directed.
S & F in replacement of lamp angle/batten holder Bakelite Pin/Retrofit type, in and including with 10 watt LED Lamp (B22) all as specified and as directed.
S&F LED Light fitting 1x9W Bulkhead luminaires including LED light driver connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
Supply and fixing LED tube lights fitting, 4 feet long 1x 18W, 220V, AC decorative box type with holder including Removable poly cabonate LED tube light with inbuilt driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed..
S & F Decorative wall mounting Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with and including 9 W LED lamp B22 base Cat part No Floretine WL 2LS B22 SS of havells or equivalent of Crompton/Surya all as specified and directed.
S&F LED Ceiling light/ down lighter 18 watt round shaped, Robust PDC alminium housing including drier an electric connection, suitable for PVC ceiling all as specified and directed by engr-in-charge. Make Crompton Cat pt no- CDR-206-18-30-SL-NWH or equivalent fron Havells/ Bajaj/ philips
Supply and fixing building LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including suitable size of GI bracke and clamps for wall fixing complete all as specified and directed.
S&F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed.
Supply and fix MCB, Tripple Pole & Neutral, 63 Amps, 415 volts, 50 Hz, 16kA complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schinder, Havells.
S&F Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door, built in 200 Amps bus bar complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells
S&F Sheet Metal enclosure Double Door 4 way DBs SPN, 240V with 200 Amps rated bus bars complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells
S&F MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed.Make: L&T / Legrand /C&S/Havells
S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.Make: L&T / Legrand /C&S/Havells
M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 06 Sqmm (nominal area) each and one single core 06.0 Sqmm (nominal area) as earth continuity conductor drawn into PVC casing capping complete all as specified and directed. NOTE: (i) Rates for PVC casing capping with accessories are deemed to be included in the unit rate.
M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 04 Sqmm (nominal area) each and one single core 04.0 Sqmm (nominal area) as earth continuity conductor drawn into PVC casing capping complete all as specified and directed. NOTE: (i) Rates for PVC casing capping with accessories are deemed to be included in the unit rate.
Dismantling and taking down of Exhaust fan from existing position and keep in safe cusody, repainting the same with grey colour enamal paint and refixing the same after completion of all B/R work all as specified and directed.
Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for servicing, inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound painting outer body and re-assembling of Geysers after repairs carrying out and re-fixing in same position including replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note :- Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate.store, complete all as specified and directed. connection pipe etc all as specified and directed.
Supply and fix offload change over switch 100 amps capcity from operated with steel sheet enclosure including necessary fixing arrangments in wall and all incomming and out going electric connections all as specified and directed.
Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and directed and testing on completion.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
DEDUCTED AMOUNT OF SCHEDULE OF CREDIT
G K SUTHAR
HEM RAJ GURUNG
DEEP CHANDRA JOSHI
M/S JAYSHREE CONCERN
PRASAD PRADHAN AND SON
RAJU TAMANG
RAMESH GURUNG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .