Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹25.1 L+₹3.8 L (17.8%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹27.2 L+₹6.0 L (28.0%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹27.8 L+₹6.6 L (30.9%)Rejected-Finance 00 KANDHARPUR NEAR JUNIOR HIGH SCHOOL KANDHARPUR BAREILLY UTTAR PRADESH 243004 UDYAM UP 15 0021222 | BAREILLY | UTTAR PRADESH | 243004 | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹23.9 L
EMD Value
₹47,800
Closing Date
24 Oct 2022, 6:00 pmClosed
GE South Delhi Cantt 110010
Garrison Engineer South Delhi Cantt-110010
REPAIR/MAINT OF STEEL AND WOODEN FURNITURE ITEMS OF VIKRAM VIHAR AND ANUJ VIHAR UNDER BSO (S) OF GE (SOUTH) DELHI CANTT-10
2022_MES_539011_3
GE/DS-50/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹47,800
Yes
28 Nov 2022
3 Oct 2022
26 Oct 2022
3 Oct 2022
24 Oct 2022
10 Oct 2022
Amount
A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units of GE(South) Delhi Cantt including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. D) The make/manufacturer of the material shall be from one of the make as specified under the list of PRODUCTS AND NAME OF MANUFACTURERS at Srl page No.113 of Tender Documents
Table Dining 6/8 Persons : FD-273, 376/MAP
Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
All as above but for 08 Pers.
Teak wood corner to legs as per sample rest all as directed by EIC/GE.(Note:Each corner shall be measured as one unit).
Top long rail as per drg
Top short rail as per drg
Legs as per drg (Note : Each leg shall be measured and paid as one unit)
Shoe as per sample
Table writing: FD-33,275, DB-3982
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Teak wood corner to legs as per sample rest all as directed by EIC/GE.(Note:Each corner shall be measured as one unit)
Legs as per drg (Note : Each leg shall be measured and paid as one unit)
Foot rest as per drg
Stiffener side as per drg
complete cabinet body except drawer /shutter with 16 mm thick plywood BWP grade with 1/0.8 mm thick sumica and balancing white sunmica 1/0.8 mm thick, shade as approved by EIC/GE all as per drg and specified.
Back ply BWP grade as per drg.
Drawer made of 16 mm thick plywood BWP grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer with 9 mm thick BWP Plywood with white sunmica 0.8 mm thick and telescopic channel complete all as per drg.
S/S handle as per sample
16 mm thick BWP grade plywood with bothside laminate sheet 0.8 mm thick of shade as approved by EIC/GE for Cabinet door along with magnetic catcher & SS Piano type hinge complete rest all as per drg and as directed by EIC.
Table Dressing Ladies: FD-32,251, DB-3180/MAP
Mirror 5mm thick with 6 mm thick Back ply BWP grade as per drg.
Frame for mirror assembly, complete as per drg
Complete Cabinet including drawer shall be made of 18 mm thick Plywood ext grade with 0.6 mm thick sunmica , shade as approved by EIC/GE with 4 mm thick Teak wood edging in front & sides and bottom of drawer with 18 mm thick BWP Plywood and telescopic channel complete all as per drg.
Plain glass with aluminium runner as per drg.
S/S handles as per sample.
12 mm thick back ply BWP grade of table dressing box as per drg.
legs frame complete as per drg
Complete Stool dressing made of 18 mm thick Plywood exterior grade with 0.6 mm thick sunmica, shade as approved by EIC/GE with 4 mm thick Teak wood edging ,including PU foam cushion with 40 Density and Tapestry cloth as approved by EIC/GE complete as per Drg and as directed by EIC.( Note: The rate of Tapestry cloth shall not be less than Rs450/RM)
Peg Table :FD-277/ 384, DB-3973
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg (Note:Each leg shall be measured and paid as one unit)
Top Short as per shape & size of long rail complete as directed by EIC
Center stiffener as per shape & size of sides stiffner as directed by EIC.
Teak wood corner to legs as per sample rest all as directed by EIC/GE.(Note:Each corner shall be measured as one unit)
Shoe as per sample
Table Bed Side :FD-276/248/MAP
S/S handles of drawers as per sample held with BSO office
Sides with 16 mm thick BWP grade plywood ISI marked with both side sunmica 0.8/1 mm thick complete rest all as per drg.
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Drawer large made of 16 mm thickBWP grade plywood with 0.8 mm thick sunmica of shade as approved by EIC/GE with 1.6 mm thick PVC edging in front & sides and bottom of drawer with 9 mm thick BWP Plywood, covered with 0.8 mm thick white sunmica and telescopic channel complete all as per drg.
Drawer made of 16 mm thickBWP grade plywood with 0.8 mm thick sunmica of shade as approved by EIC/GE with 1.6 mm thick PVC edging in front & sides and bottom of drawer with 9 mm thick BWP Plywood covered with 0.8 mm thick white sunmica and telescopic channel complete all as per drg.
Top back Sides with 16mm thickBWP plywood with 0.8 mm thick both side with 1.6 mm thick PVC edging complete all as per drg.
Frame finished with two coat of enamel paint including replacement of unsv shoes and welding wherever required complete and with both side stiffner as directed by EIC ( Note:The rate quoted by the tenderer are deemed to be included)
6 mm thick back ply BWP grade of table bed side as per drg.
25 mm Square CRCA Section similar to frame on top and bottom both side irrespective of what is shown on drg complete with painting. Rest all as specified in drg or as directed by EIC.
Table Centre :FD-274 / 235
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs with shoe as per drg(Note:Each leg shall be measured and paid as one unit)
Top Short as per shape & size of long rail complete as directed by EIC
Center stiffener as per shape & size of sides stiffner as directed by EIC.
Teak wood corner to legs as per sample rest all as directed by EIC/GE.(Note:Each corner shall be measured as one unit)
Side Board/Binsoiled linen multipupose : FD-26/241/MAP
12 thick Back ply BWP grade as per drg.
Door shutter made of with 16 mm thick plywood exterior grade with 0.6 mm thick sunmica both side , shade as approved by EIC/GE with 4 mm thick Teak wood edging in front & sides and bottom of drawer made with 16 mm thick BWP Plywood covered with 0.6 mm thick sunmica both side,including magnetic catcher and S/S handle as per sample complete all as per drg.
Drawer made of 16 mm thick plywood exterior grade with 0.6 mm thick sunmica both side, shade as approved by EIC/GE with 4 mm thick Teak wood edging in front & sides and bottom of drawer made with 18 mm thick BWP Plywood including telescopic channel & SS handle as per sample. Rest all as per drg.
Top/sides/bottom with 18 mm thick plywood exterior grade with 0.6 mm thick sunmica , shade as approved by EIC/GE with 4 mm thick Teak wood edging in front & sides and bottom of drawer made with 18 mm thick BWP Plywood complete all as per drg.(Note:Fabrication arrangement of parts shall be made with PVC/MS corner all as per drg and as directed by EIC).
Legs with frame complete as per drg or as directed by EIC
Re -adjustment of drawers making suitable arrangements by Providing telescopic chanel (set of two) for smooth functioning in each drawer including S/S Handle as per sample.
Teapoy : FD-278, 34, 382
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Center Stiffener as per bottom rail shape irrespective of what is shown on drg complete as directed by Engr-in-Charge.
Legs as per drg(Note:Each leg shall be measured and paid as one unit)
Teak wood corners to be provided all as directed by EIC/GE.
Shoe as per sample
Teapoy verandah: MAP
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete all as per drg.
Shoe as per sample
Welding work to legs frame etc wherever required as directed by EIC( Note: Entire Welding repair work of each Teapoy shall be measured and paid as one unit)
Legs as per drg (Note:Each leg shall be measured and paid as one unit)
Hat stand : FD-233
Hat stand made of 18 mm thick BWP plywod with 1 mm thick sunmica complete as directed by EIC
Mirror with other components as per drg .
Brass pegs as per sample held at BSO yard.
Sofa set 4/5 seater : FD-281/373/MAP drg
Legs/side rails as drg
Arms as per drg
Front rails as per drg
Bearer/Batten as drg
Shoe as per sample
Back frame top/bottom/sides as per drg
Cushion complete as per shape and size ref in drg with 40 dennsity PU foam of size 22”X21”X4" with upholstery of tapestry cloth colour and shade & quality including providing a chain best quality (at either of 21" side) of Make -YKK as approved by EIC/GE (Note: The rate of Tapestry cloth shall not be less than Rs450/RM and shall be approved by GE)
Chair Dining officers: MAP
Rear legs as per drg (Note:Each leg shall be measured as one unit)
Front Leg as per drg (Note:Each leg shall be measured and paid as one unit)
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Back strip as per drg
Replacement of us plywood for seat with new one 12mm thick Plywood BWP and fixing PU foam cushion with 40 Density with tapesrty cloth complete as per Drg and as directed by EIC.(Note: The rate of Tapestry cloth shall not be less than Rs350/RM and shall be approved by GE)
Table computer: MAP/TP
Top of 18 mm thick MDF board exterior grade (Grade I, Type-II) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Sides with 18 mm thick Prelaminated MDF board exterior grade (Grade I, Type-II) complete rest all as per drg.
Complete key board made of 18 mm thick Prelaminated MDF board exterior grade (Grade I, Type-II) with telescopic channel & PVC beading complete rest all as per drg & as directed by Engr-in-Charge.
Complete mouse board made of 18 mm thick Prelaminated MDF board exterior grade (Grade I, Type-II) with telescopic channel & PVC beading complete rest all as per drg & as directed by EIC
Two coats of synthetic enamel paint to frame including preparation of surfaces including all replacement of all shoes /caps complete all as per drg and as directed by EIC.
Stool dressing : MAP
Replacement of us plywood for seat with new one 12mm thick Plywood BWP and fixing PU foam cushion with 40 Density with tapesrty cloth complete all as per Drg and as directed by EIC.(Note: The rate of Tapestry cloth shall not be less than Rs350/RM and shall be approved by GE)
Legs as per drg.(Note:Each leg shall be measured and paid as one unit)
Bed Hard Steel: FD/E6/MAP/8(R)
12mm thick plywood top BWP grade as per existing shape and size with complete rest all as per drg as directed.
Hard rubber shoe std quality as per drg
Welding work wherever required as directed by EIC
S&F 18 mm thick prelaminated MDF board ext gde head rest & foot rest with PVC beading complete rest all as per drg and as directed by EIC
Almirah Large Steel 1/2HX1/2S : MAP
S/S 6 lever locks as per drg
CP Handle as per sample/as per drg
Legs as per drg (Note:Each leg shall be measured and paid as one unit)
Repairs to door as specified including replacement of hinges
Repair/adjustment to existing shelf including welding as per drg
Shutter/door as per drg.
Shelf as per drg
Almirah Medium / Small Steel: FD-1032/FD-104(m)
S/S 6 lever locks as per drg
CP Handle as per sample/as per drg
Legs as per drg(Note:Each leg shall be measured as one unit)
Repairs to door as specified including replacement of hinges
Repair/adjustment to existing shelf including welding as per drg
Shutter as per drg.
Shelf as per drg
Chair writing with arm & without arm :FD/E6/MAP/12 & TP
Taking out old/unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric and polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.(Note: The rate of fabric cloth shall not be less than Rs300/RM and shall be approved by GE)
All as above but unserviciable back complete.
Arm rest of chair writing steel & supply & fixing new PU arm rest as per drg
Preparation of old painted surface by scraping & rubbing and applying two coats of painting with brush complete frame before fitting of above parts as per drg.
Taking out unserviceable/broken frame and S&F new MS tublar frame powder coated as per drg.
Welding work wherever required as directed by EIC
Charpoy IP folding : FD-388 (R)
08 mm thick plywood top BWP grade as per existing shape and size with shunken nut/bolts complete rest all as drg and as directed
Hard rubber shoe std quality as per drg
Welding work wherever required with FI as directed by EIC
Chair Computer/Revolving: FD/E6/MAP/01 & TP
S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic and mouled polyurethene foam/PU 40 Density with PVC lipping all round complete all as shown on drawing. (Note: The rate of Fabric shall not be less than Rs350/RM and shall be approved by GE)
All as above but back complete.
PU arms as per drg
Complete pedestal assy std quality complete all as per drg and as directed by EIC.
Supplying and fixing new twin wheel castors of required dia as per sample complete all as directed.
Supply & fix new chrome free cylinder tube Hydrolic fixed complete all as per drg and directed.
Supply & fix new Locking lever assembely as shown in drawing complete all as directed.
Chair Verandah :FD-19, FD-256, FD-359/MAP/11/MAP-II/15
Conduit section any member of MS conduit pipe 16G, 19mm dia including painting with primer as per drg.
Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by Engr-in-Charge.
Hard rubber shoes as per drg and as directed by Engr-in-Charge.
Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/GE)
A) M&L for melamine polish with spray machine after removing of existing polish by scrapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. C) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (South) Delhi including BSO's Furniture Yard as directed by Engineer-in-Charge
Bed Hard Steel: FD/E6/MAP/R
Chair Dining officers :MAP
Hat Stand with Mirror :FD-233
Peg Table :FD-277/ 384, DB-3973
Side board /Bin soliled linen multipurpose FD-26/241/MAP
Sofa Set 5 seater: FD-281/373/MAP Drg
Stool dressing :
Table dining 6/8 pers : FD-273,376/MAP or similar type Drg
Table Bed Side :FD-276/248/MAP
Table Centre :FD-274 / 235
Table dressing ladies : FD-32,251,DB-3180/MAP
Table wrtiting : FD-33,275,DB-3982 or similsr type
Teapoy : FD-278, 34, 382
Almirah Large Steel 1/2HX1/2S : MAP
Almirah med steel
Charpoy IP folding :FD-388(R )
Teapoy verandah: MAP
Rack Shoe Steel
Chair Verandah :FD-19, FD-256, FD-359/MAP/11/MAP-II/15
Notes for BoQ:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
The furniture article as and when received from Unit/Occupant as case may be, the Engineer-in-Charge (BSO) shall enter these furniture articles in furniture deposit register (IAFW-1830) and shall subsequently issue for necessary repair/polishing to the Contractor through Nominal issue voucher(NIV) mentioning the date of issue duly signed by the contractor. In certain cases the repairable furniture article can also be issued directly from units.
The contractor shall return these furniture articles after repair work on or before 30 days from the date of issue of furniture and nominal Receipt Vouchers (NRV) shall be issued duly signed by furniture I/C, BSO and Contractor.
If the contractor fails to repair and return these furniture article within 30 days, a penalty of Rs 10 per furniture article per day will be levied to contractor and the same will be recovered from contractors claims.
Generally the periodicity for issue of furniture from BSO Yard shall be once or twice in a month (reckoning from date of commencement of work as per WO No.1) subjected to the users requirement/availability of furniture for repair works. However care shall be taken that repairable furniture shall be issued not more than 20% of total qty of CA provision in one month.
Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the adjoining Parts and S&F new componants of same pattern as per Drg in lieu of Dismantled /Discorded componants including Tighting the Joints, Pinning, Screwing, wedging, Gluing, Providing Hinges, Placing every part in-tact condition.
Cleaning, Derusting of Stain/Dirt old polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying two coats of French Polish for wooden Items .
Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting /Polishing on whole Items should be matched and desired finish shall be obtained.
Work will be executed where the Furniture Item's exist in different user unit's of BSO GE South New Delhi including Furniture yard of BSO's Sub Division.
SMS Enterprises
M/S NEHAL ENTERPRISES
M/S Shri Balaji Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .