Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹5.8 L
Closing Date
8 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN/I/TSK
25 conditions · 14 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-XIVA, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Clause Regarding GST-(a) Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, Place of business in State etc. (b) The contract is under GST act & rules as applicable time to time.(c) All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
( i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from Govt/Semi-Govt Organizations and PSUs are only acceptable.
(b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note: Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria.
(ii)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/ last bill paid by company in support of above work experience certificate.
"No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/ offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/ credentials downloaded with offer only".
Similar Nature of work:- "Any building works with framed structure".
28 conditions · 8 needing a document upload
The tenderer should furnish detail information in regards to Employment/Partnership etc. of Retired Railway Employee as per clause 16 of GCC -2022 and clause no. 14 of second sheet of Tender document. In case no employment/Partnership etc., NIL declaration to be submitted.
Railway Boards letter No. 2020/ACII/9/6/e dtd.07.04.2022At the time of submission of Bank Guarantee, it is necessary that following details entered into SFMS by bank authority while issuing Bank Guarantee by vendors/contractors in favour of Railways. (R.B's letter No. 2020/ACII/9/6/e dtd.07.04.2022)IFSC CODE SBIN000RAILIFSC type BRANCHBANK NAME STATE BANK OF INDIABRANCH NAME RAILCITY NAME NAVI MUMBAIADDRESS SECTOR-11, CBD BELAPUR, NAVI MUMBAIDISTRICT NAVI MUMBAISTATE MAHARASHTRABG ENABLED YESThis IFSC code is only valid for BG issuance and verification in favour of Railways.
The tenderer/s shall submit a duly filled Tender Form (First Sheet) as Annexure-I of Section-VII of the Standard tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
The manual/offline mode of payment through Demand Draft, Bankers Cheque, Cash Deposit Receipt shall not be available against works tenders. The bidders will have to make all payments either through Net Banking, debit/credit etc. available on IREPS Portal. Fixed deposit Receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e-tender portal).
Tenderers intending to participate in the e-tender must make payment of the Cost of Tender Document and Earnest Money, online as per the provisions available in IREPS Works Tender Module.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2014 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items C. and D. of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Tender would close at the specified time and date. In case the specified date is declared a holiday, the Tender would close at the same time on the next working day.
Provision of Interlocking Buildings at 11 Nos. LC Gates viz. ST/69, ST/118, ST/110, FM/4, SM/4, SM/18, ST/109, FM/49, FM/68, FM/78 & FM/79 in connection with LC Gate Interlocking Works in Tinsukia Division.
02-TSK-ENGG-47-2026~NFR
02-TSK-ENGG-47-2026
Open
Works - General
9 Months
Tinsukia, Assam
₹0
₹5.8 L
15 Sept 2026
15 Sept 2026
24 Sept 2026
64 items across 1 schedule · ₹2,22,17,528.93 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 462 | 260.3 | 1,20,258.6 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 418 | 2,123.75 | 8,87,727.5 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 33 | 7,878.5 | 2,59,990.5 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 66 | 7,294.7 | 4,81,450.2 |
| 5 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 22 | 9,895.2 | 2,17,694.4 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 550 | 392.15 | 2,15,682.5 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 660 | 927.25 | 6,11,985 |
| 8 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 704 | 736.4 | 5,18,425.6 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 572 | 961.3 | 5,49,863.6 |
| 10 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 16500 | 107.85 | 17,79,525 |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 21780 | 107.85 | 23,48,973 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 165 | 9,504.75 | 15,68,283.75 |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 198 | 9,860.4 | 19,52,359.2 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 198 | 7,132.25 | 14,12,185.5 |
| 15 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 1650 | 1,123.8 | 18,54,270 |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 99 | 1,267.95 | 1,25,527.05 |
| 17 | Kiln seasoned and chemically treated hollock wood | cum | 1.65 | 83,378.05 | 1,37,573.78 |
| 18 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 69.3 | 2,392.65 | 1,65,810.65 |
| 19 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 880 | 238.35 | 2,09,748 |
| 20 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 132 | 228.85 | 30,208.2 |
| 21 | 300x16 mm | Each | 66 | 216.55 | 14,292.3 |
| 22 | 100X58X1.90 mm | Each | 132 | 107.1 | 14,137.2 |
| 23 | 150x10 mm | Each | 88 | 287.25 | 25,278 |
| 24 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 22 | 854.65 | 18,802.3 |
| 25 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 11 | 726.6 | 7,992.6 |
| 26 | Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). | Sqm | 198 | 8,799.25 | 17,42,251.5 |
| 27 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 41.58 | 5,804.35 | 2,41,344.87 |
| 28 | Hot finished seamless type tubes | Kg | 1100 | 206.35 | 2,26,985 |
| 29 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 660 | 614.2 | 4,05,372 |
| 30 | Acid and alkali resistant tile | Sqm | 198 | 1,738.15 | 3,44,153.7 |
| 31 | Size of Tile 600 x 600 mm | Sqm | 27.5 | 1,464.85 | 40,283.38 |
| 32 | 110 mm diameter | Metre | 38.5 | 377.4 | 14,529.9 |
| 33 | 110 mm bend | Each | 22 | 150.35 | 3,307.7 |
| 34 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 99 | 738.65 | 73,126.35 |
| 35 | 1:4 (1 cement: 4 fine sand) | Sqm | 3520 | 347.05 | 12,21,616 |
| 36 | 1:6 (1 cement: 6 fine sand) | Sqm | 330 | 333.35 | 1,10,005.5 |
| 37 | 1:3 (1 cement: 3 fine sand) | Sqm | 440 | 494.3 | 2,17,492 |
| 38 | 1:3 (1 cement : 3 fine sand) | Sqm | 660 | 300.45 | 1,98,297 |
| 39 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 4400 | 185.65 | 8,16,860 |
| 40 | Two or more coats on new work | Sqm | 660 | 155.9 | 1,02,894 |
| 41 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 44 | 53.45 | 2,351.8 |
| 42 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in- charge. | Sqm | 550 | 199.35 | 1,09,642.5 |
| 43 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 11 | 8,006.6 | 88,072.6 |
| 44 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 11 | 6,258.75 | 68,846.25 |
| 45 | White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap | Each | 11 | 2,226.35 | 24,489.85 |
| 46 | Rectangular shape 453x357 mm | Each | 11 | 1,361.8 | 14,979.8 |
| 47 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 11 | 168.35 | 1,851.85 |
| 48 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 55 | 272 | 14,960 |
| 49 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre | 55 | 318.35 | 17,509.25 |
| 50 | PN - 16 Pipe, 40mm OD (SDR-7.4) | Metre | 110 | 545.75 | 60,032.5 |
| 51 | 15 mm nominal bore | Each | 22 | 353.25 | 7,771.5 |
| 52 | 20 mm nominal bore | Each | 11 | 462.5 | 5,087.5 |
| 53 | 25 mm nominal bore | Each | 11 | 464.05 | 5,104.55 |
| 54 | Horizontal | Each | 11 | 952.6 | 10,478.6 |
| 55 | Vertical | Each | 11 | 1,134.7 | 12,481.7 |
| 56 | Up to 6 metres depth | Metre | 66 | 747.9 | 49,361.4 |
| 57 | Beyond 6 m and up to 12 m depth | Metre | 66 | 884.85 | 58,400.1 |
| 58 | Beyond 12 m and up to 18 m depth | Metre | 66 | 1,025.95 | 67,712.7 |
| 59 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. | Metre | 33 | 960.3 | 31,689.9 |
| 60 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. | Metre | 165 | 546 | 90,090 |
| 61 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. | Each | 11 | 1,321.65 | 14,538.15 |
| 62 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 5500 | 11 | 60,500 |
| 63 | Frame size 45 x 70 mm | Metre | 54.56 | 705.85 | 38,511.18 |
| 64 | 30 mm thick | Sqm | 17.6 | 4,346.7 | 76,501.92 |
| Schedule total | ₹2,22,17,528.93 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentwithPVCon18.08.2026.pdf Tender document 1
ATTACHMENT
ArbitrationAdvancecorrectionslip10.pdf
ATTACHMENT
GCCACSno.11_compressed.pdf
ATTACHMENT
JPOofCablecutting.pdf
ATTACHMENT
LabourLawprovisionguideline.pdf
ATTACHMENT
SpecialconditionInterlocking11nosgate.pdf Tender document 6
ATTACHMENT
TenderDocumentwithPVCon18.08.2026.pdf
ATTACHMENT
SpecialconditionInterlocking11nosgate.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .