Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹28,210
Closing Date
14 Dec 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Pallavi
Combined Package for -Associated works with respect to commissioning of 11kV MCVCB panels at 220kV R/S Sarjapura, 2)Replacement of deteriorated 11kV annunciator Panel by new simplex panels at 66/11kV S/s Attibele 3)Providing 1No. of 11kV Bus Coupler for connecting bank-1A and Transformer-2 at 66/11kV S/s Anekal 4)Providing 1No. of 11kV Bus Coupler and adopter panel at 66/11kV S/s Jigani 5)Providing 1No. of 11kV Bus Coupler MCVCB at 220kV R/s Yerrandanahalli on PTK Basis.
KPTCL/2023-24/SS/WORK_INDENT339
KPTCL/2023-24/SS/WORK_INDENT339
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL SEE Transmission And Mantainance Ramanagara Circle
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
Only those who have experience in the work of construction of 66kv/220kV substation/ Receiving station work or Bidder should have carried out replacement of 11Kv breaker work/providing additional 11kV breaker work or providing annunciator panel or similar type of works specified in the scope of work on TTK or PTK or labour contractor of a Turnkey Contractor or sub-contractor of Turn Key Contractor basis in any of the Receiving/Sub-Stations in KPTCL/ESCOMs/Public Sector undertakings KPTCL/ESCOMs/Public Sector or the firm should have carried out the similar type of works specified in the scope of work
₹710
₹28,210
24 Nov 2023
24 Nov 2023
18 Dec 2023
29 Nov 2023
Combined Package for -Associated works with respect to commissioning of 11kV MCVCB panels at 220kV R/S Sarjapura, 2)Replacement of deteriorated 11kV annunciator Panel by new simplex panels at 66/11kV S/s Attibele 3)Providing 1No. of 11kV Bus Coupler for connecting bank-1A and Transformer-2 at 66/11kV S/s Anekal 4)Providing 1No. of 11kV Bus Coupler and adopter panel at 66/11kV S/s Jigani 5)Providing 1No. of 11kV Bus Coupler MCVCB at 220kV R/s Yerrandanahalli on PTK Basis.
19 Core 2.5 sqmm copper control cable
4 Core 6 sqmm copper control cable
REF 615 Relay(preferrably ABB make)
Test switch RTXP-18 preferrably ABB make
Trip Circuit supervision relay
Energy meter 3ph 4wire DLMS
Fuse cut outs of Different Amps Capacity
Supplying of grounding name plate including danger plate
Erection, allignment & fixing to the foundation, indoor/outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection (MCVCB+Annunciation Panel+SAS Relays)
Wiring & assisting in testing and commissioning of 11kV Outdoor switchgears SAS panel and Annunciation panel
Installtion integration, Testing and commissioning of 11kV C&R panel with SAS supplied by a company for new bay extension with their existing Automation system
Grounding of equipments with 75X12mm GI flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes & connecting...
Laying of control cables from equipments to control panels i) 19Corex2.5sq.mm ii) 4Core x6.0sq.mm
Letter writing for euipment grounding name plates with enamel paint and also including cost of paint and brush
Wiring: Identification of wires, ferruling, crimping & termination of wires for annunciation etc., Testing of relays CTs, PTs and Breakers for operation(1I/C+1BC+4F)
11kV UG cable 1X1000sq.mm
11kV Heat Shrinable cable termination kit for 1X1000sq.mm XLPE cable indoor type
19CX2.5sq.mm Copper control cable
4CX6sq.mm Copper Control cable
Supplying and monoplast compound for vermin proofing'
Supplying of 1X2mtr, 12mm thick safety rubber mats near control panel and switchgear panel
Erection, allignment & fixing to the foundation, indoor/outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection
Erection of 11kV Adapter Panel
Laying of 1X1000sq.mm 11kV XLPE UG cable
Fixing of 11kV heat shrinkable cable termination kit for XLPE cable of Indoor type
Laying of Control cable from equipment to control panel
Wiring & assisting in testing and commissioning of 11kV Indoor switchgears
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2part clamo out of GI flat 50x6mm continuously welded around the pipe using cast iron welding electrod...
Grounding of equipments with 50x6mm GI flat and connecting equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending twisting drilling of holes and connecting...
Supplying and providing 450mm dia 450mm height 1.5" to 2" thick hume pipe collar(non prseeure type) for earth pits including all lead and lifts etc.
Wiring: Identification of wires, ferruling, crimping & termination of wires in breakers and wiring upto control panels/relay panels. etc., Testing of relays CTs, PTs and Breakers for operation
19 core 2.5 sq.mm copper control cable
11 kV UG Cable 1 Core 1000 Sq mm
11 kV heat shrinkable cable termination kit for XLPE cable of indoor type
11 kV heat shrinkable cable termination kit for XLPE cable of outdoor type
Multi-Functional Transducer(MFT)
220/110 V Opto Coupler 8out put points
Contact Multiplier relay(CMR) rating 10 Amps
Terminal block (Knife type)
Single core copper conductor flexible 2.5 sq.mm coil
Current cable -copper core with 4.0 sq mm cross section multi strand 7 core for CT termination
Voltage cable -copper core with 2.5 sq mm cross section multi strand 4 core for PT termination
Signal cable armored copper core with 0.5 sq.mm cross section multi strand 10 core
Control cable- copper core with 1.5 sq.mm cross section multi strand 10 core
Glands, DIN rails, TB’s, screws, nuts & bolt etc.,
Erection, allignment & fixing to the foundation, indoor/outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection
Laying of 1x1000 sq.mm 11kV XLPE UG cable
Laying of control cable from equipments to control panel
Fixing of 11 kV heat shrinkable cable termination kit for XLPE cable of indoor type
Fixing of 11 kV heat shrinkable cable termination kit for XLPE cable of outdoor type
Grounding of equipments with 50X6mm G.I.Flat & connecting equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending,twisting,drilling of holes & connecting by...
Drilling of holes to breaker & annunciation panel, providing glands for the control cable termination and supply of lugs & ferrules for wiring
Laying of DI/DO communication cables & terminating
Fixing of opto coupler and wiring
Fixing of MFT and wiring
Configuration of RTU and engineering along with validation of data at SLDC
Wiring and assisting in testing and commissioning of 11kV Indoor/Outdoor switchgear
Wiring: Identification of wires, ferruling, crimping & termination of wires in breakers and wiring upto control panels/relay panels. etc., Testing of relays CTs, PTs and Breakers for operation
11KV,1000 sqmm U. G cable
Heat shrinkable 1X1000 Sqmm Indoor termination kit,Pothead with lugs
19 Core 2.5 sqmm copper control cable
4 core 6 sqmm copper control cable
2 core 6 sqmm copper control cable
Cable covering tiles (125X250X40mm)
Earthing material for 11KV feeder, DP structure ,CI pipe type grounding including charcoal
Supplying gounding name plate, including danger plate
Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear Panel/unit including movement from the point of unloading to the point of erection.(Coupler panel and annunciator panel...
Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear Panel/unit including movement from the point of unloading to the point of erection.(11 KV KeosK, for annunciator panel)
Laying of control cable from equipments to control panel
Laying of Power cable 1000 sqmm
Formation of indoor pothead for 1000sqmm, 11kV class XLPE UG cable
Earth work Excavation for cable trench of 0.5 to 0.75 mtr width and depth upto 1 mtr including trial pits, depositing on bank upto a lead of 50mtrs, supplying and displaying necessary danger boards an...
Refilling this cable trenches with selected available earht from trench excavation in layers of 15cm thickness including depsoting of the surplus earth wih a lead of 200mtrs
Grounding of equipments with 50X6mm G.I.Flat & connecting equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending,twisting,drilling of holes & connecting by...
Letter writing for euipment, grounding name plates with enamel paint and also including cost of paint and brush
covering the cable with tiles
Spreading and forming with sand round the cable
Wiring and assisting in testing and commissioning of 11kV Bus Coupler
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Disposal off the excess excavated earth and debries of all types by vehicle including loading, unloading with all lead and lifts, labour, HOM of machineries etc. for Distance above 5 km for every 1 km
19 Core 2.5 sqmm copper control cable
4 core 6 sqmm copper control cable
2 core 6 sqmm copper control cable
Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear Panel/unit including movement from the point of unloading to the point of erection.(Coupler panel and annunciator panel...
Dismantling of single unit announciator panels
Rewiring & assisiting in testing and commissioning of panels
Laying of control cable from equipments to control panel
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
new annex.doc
Tender Document • 0.13 MB
NIT.doc
Tender Document • 0.13 MB
IFB.docx
Tender Document • 0.06 MB
technocommercial_ SHEETS.xls
Tender Document • 0.12 MB
ITB.docx
Tender Document • 0.06 MB
GCC.docx
Tender Document • 0.07 MB
SCC.docx
Tender Document • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .