Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹36.1 L+₹1.1 L (3.29%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹37.3 L+₹2.3 L (6.67%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹37.5 L+₹2.6 L (7.43%)Rejected-AOC | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹38.1 L+₹3.1 L (8.99%)Rejected-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹47.4 L
EMD Value
₹94,900
Closing Date
18 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_559820_1
8400-874/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹94,900
Yes
9 Jan 2023
26 Oct 2022
19 Nov 2022
26 Oct 2022
18 Nov 2022
11 Nov 2022
Amount
Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering in ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F mild steel wind ties for roof including securing bolts Fe-290 Gde-165 complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (un- reinforced) not exceeding 15 cm thickness (above or below ground level) and removing rubbish off from the premises complete all as specified and directed.
Surface dressing n.exc 15 cm deep in soft /loose soil complete all as specified and directed
Moorum/red bajri filling in floors or in foundation, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for hardcore broken stone of gauge exc. 63mm but n.exc 100mm, deposited, spread and leveliled in layers n.exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 100mm thick Cement concrete type B- 2,1:2:4 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and directed.
M&L for 25mm thick Cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor for levelling course complete all as specified and directed by Egineer-in-Charge.
M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar (1:6) and pointed in white or coloured cement to match complete all as specified and directed.
M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
All as per item No 13.00 mentioned here-in-above but in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as speciified and directed.
Dismantling wall and ceiling board of any descrition complete all as specified and directed.
S&F anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed.
S&F hangers 6mm di GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fteners 12.5 mm dia, 40 mm long complete all as specified and directed.
S&F 6mm thick non asbestos designer fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling complete all complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section in unframed work, in any position complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of chajjas and brick walls etc incl raking out joints, hecking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed
M&L Rendering 10 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finished even and smoothh without using extra cement complete all as specified and directed
M&L for Rendering 15mm thick (1st coat 10mm and 2nd coat 5mm) in CM 1:4 using liquid water proofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately)
Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
S&F Mild Steel TMT bars 10mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed by Engineer in Charge.
All as per item No 27.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying a layer of wall care putty (minimum 1.5mm thick) and two coat of oil bound distemper complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar)
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
Refixing in same opening of chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed.
Refixing in same opening of chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame ) each complete all as specified and directed.
Taking down chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed.
Taking down chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame ) each complete all as specified and directed.
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
All as per Item No 35.00 mentioned here-in-above but with out glazing bars complete all as specified and directed.
M&L for framed work such as grills etc with endsof bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed
M&L for one coat synthtic enamel paint on old steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed
M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples including taking out old wire cloth complete all as specified and directed.
M&L for chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered, put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifiedd and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood glazed & skeleton shutters, open repeated & prepared to received glass gauze etc. (without sash bars) edges of framing plain for securing glass etc, fitted to chawkhats complete all as specifiedd and directed by Engr-In-Charge
S&F 300 mm door bolts, plate type, stainless steel bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed
S&F mild steel flat iron as in hold fasts including all necessary cutting etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block for fixing of hold fasts etc complete all as specified and directed
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n.exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc.,area n.exc 0.1 sq. m each and treated with tar or coal tar black paint complete all as specified and directed
M&L painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
S&F 25mm dia Stainless steel curtain rod complete all as specified and directed.
S&F brass CP bracket fancy type suitable for fixing of 25mm dia curtain rod complete all as specified and directed by Engr-in-Charge
S&F MS ordinary rat tail rod pattern spring 300mm including roller and roller plate on wooden/steel choukhat including welding, riveting etc complete all as specified and directed by Engr-in-Charge.
S&F 200mm stainless steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.
S&F 125mm stainless handles, cast type, stove enamelled black complete all as specified and directed
S&F 2nd class Hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n.exc 200 cu. cm each all as specified and directed by Engr-in-Charge
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed
S&F 3mm figured glass pin headed type and glazing with oil putty in square n.exc 0.50 sqm each pane complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr - in - Charge.
S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr - in - Charge.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150 mm aluminium handle cast type, anodised, complete all as specified and directed
S&F butt hinges 100mm, medium weight, stainlesssteel all as specified and directed complete all as specified and directed
S&F door closer aluminium body, hydrailically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all complete all as specified and directed.
S&F brass mortice lock vertical type 100mm 4 lever fixed in aluminium door complete all as specified and directed.
S&F floor door stopper over all length of cover plate 140mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.
S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Taking up or down 15mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.
S& F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.
All as per item No 70.00 mentioned here-in-above but fixing only complete all as specified and directed.
Taking up or down 20 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.
S& F GI 20 mm dia bore steel tubing medium grade galvanised with all fittings & connection complete all as specified and directed.
All as per item No 73.00 mentioned here-in-above but fixing only complete all as specified and directed
S&F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S&F in repairs PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iro pipe of for unions complete all as specified and directed.
S&F in repair PVC connection 15 mm size PTMT nuts of length ength 600 mm complete all as specified and directed
Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
S&F in repair soap dish vitreous china white size 160x160x90mm approx all as directed by Engineer -in-Charge
S&F CP tubular towel rail 20mm dia D type 60cm between two flanges complete all as specified and directed by Engineer -in-Charge.
M&L for 75mm thick Cement concrete type C-1, 1:3:6 (40mm graded aggregate) as in plinth protection finished the surfaces even and smooth without using extras cement complete all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for Plain Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for plain cement concrete type B-0(1:2:4) (using 12.5mm graded stone aggregate) as in coping complete all as specified and directed.
M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 15mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth with using water proofing compound as per manufacturer's instruction complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed.
M&L for 100mm thick Cement concrete type C- 2,1:3:6 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and directed.
M&L for pre-polished & polished machine pressed precast concrete interlocking paver block with grey cement and no pigmenetany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
Taking down rain water pipes (any size or pattern) , including all fittings and removal off the site complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall complete all complete all as specified and directed by Engr-in-Charge.
All as per item No 96.00 mentioned here-in-above but 75 mm bore complete all as speified and directed.
S&F 110mm bore PVC (SWR) bends any radius with access door complete all complete all as specified and directed by Engr-in-Charge.
S&F 75mm bore PVC (SWR) bends any radius with access door complete all complete all as specified and directed by Engr-in-Charge.
S&F grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed
S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) 'S’ trap complete all as specified and directed
S&F in repair 75 mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.
Removing of excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in soft/loose soil complete all as specified and directed.
M&L for Cement concrete (1:3:6) Type C2 using 40 mm graded aggregates as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for Brickwork with flyash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
Extra for forming fair finished drain or channel upto 40 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type A-1 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type A-1 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type A-1 ((using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type A-1 ((using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even complete all as specified and directed.
S&F powder coated anodised aluminium frames for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of roof surfaces or concrete surface in CM (1:4) with WPC complete all as specified and directed .
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge. (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height).
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even on ceiling complete all as specified and directed.
M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed
M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) 100 mm thick as in floor finishes and fininshing the surfaces smooth complete all as specified and directed.
S&F 25mm bore GI tubing medium grade in trenches / Floor / pillar connection in old or new position including fittings all as specified & directed (Make: Bansal , Jindal)
All as per item No 133.00 mentioned here-in-above but 40mm bore complete all as specified and directed.
S&F 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F rotational/moulded polythylene four layer water tank capacity of 1000 Ltr (cylindrical vertical with closed top) hoisted & fixed position complete all as specified and directed. (Make: Sintex/Vectus/Prayag)
S&F ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for 25mm bore complete including taking down all as specified and directed.
EM PORTIONS Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators, sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 140.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.
M&L for switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.
S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all complete all as specified and directed .( For Same Board only)
S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.
S&F bell push , flush type , 5 amp complete all as specified and directed.
S&F buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.
S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: (i) Quoted rate deemed to be included for necessary chasing/cutting and making good the surface. (ii) Three core cable and conduit pipe will be measured as single unit)
S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: (i) Quoted rate deemed to be included for necessary chasing/cutting and making good the surface. (ii) Three core cable and conduit pipe will be measured as single unit)
S&F 01x 20W LED batten light fittings, with T-8 tube rode, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.
S&F in repair security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.
S&F wall mounted type decorative LED light with LED 9 watts bulb, Havells SANA , 50Hz complete with all accessories complete all as specified and directed.
S&F lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings including LED bulb 7 Watt, 240 Volt complete all as specified and directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SP, 40 to 63 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessary connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repair MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 18 KA complete with proper copper thimbles, copper reducer etc compete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Fixing/Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified.
S&F XLPE insulated armoured cable, 25 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all complete all as specified and directed. (Note : Punned thickness shall be measured).
M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
S&F metallic exhaust ventilation fan of sweep 300 mm sweep, 230 volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed. (Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates)
Supply, laying / fixing / connecting, testing and commissioning of 16 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation, sand cushioning, brick will be measured and paid separtely).
S&F security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
M/S TRIVENI BUILDERS
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
M/S S M ENTERPRISE
ANIMA ENTERPRISE
M/S SWAPAN KUMAR MONDAL
ROY ENTERPRISE
KAZI SAHABUL ALAM
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .