Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.8 L+₹10,820 (0.46%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹24.3 L+₹56,424 (2.38%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹26.2 L+₹2.5 L (10.4%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹26.7 L+₹3.0 L (12.5%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance L5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
20 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-106/2023-2024 WELCOME MAINT OF OFFRS MD ACCN IN SECTOR B UNDER AGE B/R II AT CHANDIMANDIR
2024_MES_648698_1
GE/CHM-106/2023-2024
Open Tender
Civil Works
Item Rate
270 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹80,000
Yes
6 Nov 2024
30 Mar 2024
24 Apr 2024
30 Mar 2024
20 Apr 2024
13 Apr 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.
Glazed ceramic tiles, coloured in vertical surface 300mmx450mmx 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Vitrified ceramic tiles 8-10mm thick Light shade (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as serial item No 5 herein before but on skirting etc over and including 15mm thick rendering in cement mortar 1:4 –ditto-
3mm thick 7 to 9.5mm wide PVC beading / edge profile protect tile external corners, covers roughh and shard edges enhance tile apperance at seamless glossy finish complete all as specified and directed.
Demolition of un-reinforced cement concrete of any description, in any position not specifically provided for, complete all as specified and directed.
75mm thick plain cement concrete type C-1 1:3:6(Using 20mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:4, complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
15mm thick rendering in Cement and Sand mortar 1:4 on brick or concrete surface of roof with mixing of WPC @ 3% by weight, finished even and fair mixed without using extra cement complete all as specified. (NOTE : WPC will be measrued and paid separately)
Supply only Integral waterproofing compound, all as specified.
10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.
Applying two coats of oil bound distemper on new plastered wall surface over a coat of primer including preparation complete all as specified and directed.
Preparation of new surfacs and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Two coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.
Dismantling of wall and ceiling board (fibre, pulp insulation etc) any thickness including cover fillet & removing from site complete all as specified and directed
18-19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber/ aluminium frame work complete all as specified and directed.
6mm thick , 18-19mm thick wide wooden lipping on prelaminated boards fixed with headless nails to particle / timber frame work complete all as specified and directed.
Factory made 18mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one side prelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent / adhesive complete all as specified and directed.
Continuous (piano) hinges, mild steel bright finish, width of flap when open 40mm, fixed as in repair complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.
Refixing of shutters of any description exceeding 1Sqm but not exceeding 2sqm each in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed.
35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood (Hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
100mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
150mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.
100mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.
Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.
Supply only 5mm thick tinted sheet glass, fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Steel window, box type, in repair primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter complete all as specified and directed.:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 43 hereinbefore but without glazing bar.
All as per serial item No 43 hereinbefore but in fixed type ventilator with glazing bar.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, fixed as in repair complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
4mm thick tinted sheet glass, fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , fixed as in repair complete all as specified.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified.
150 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.
140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, fixed as in repair complete all as specified & directed
15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.
15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
20mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, complete all as specified and directed.
Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for English squat pattern WC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
health faucet (ABS body) mild steel chromiu plated for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook incuding making connections and fixed in position, fixed as in repair, complete all as specified and directed.
Chromium plated jet for EWC for 15mm bore with fittings, fixed as in repair, complete all as specified and directed.
Wall Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white of size 550X400mm, including brackets of suitable size, fixed as in repair complete all as specified and directed.
Bath cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed.
Harrison rails 25 mm size, mild steel, chromium plated with fixing brackets, stops, rollers etc. ISI marked, including taking down old defective brackets complete all as specified.
Cast copper alloy, chromium plated towel rail 600mm long, fixed as in repair, complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 75mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repairs, complete all as specified and directed.
Sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915 x 460mm, bowl size 410x330x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair complete all as specified and directed.
Angular stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib tap, fancy type cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Plate rack made out of 1.00mm stainless steel sheet of size 900mmx 750mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.
Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed
75mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repairs, complete all as specified and directed.
PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe, fixed as in repair complete all as specified and directed.
PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe, fixed as in repair complete all as specified and directed.
75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, fixed as in repair complete all as specified & directed by Engineer-in-charge.
75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, fixed as in repair complete all as specified & directed by Engineer-in-charge.
Preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified.
Preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified.
Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of 2 to 3 mm thick over and including a coat of wall primer, smoothening the surfaces with sand papers etc.and applying two coats of oil bound distemper using hand roller, complete all as specified and directed.
applying two coats of exterior emulsion paint to external walls / RCC surfaces / soffits of chajjas/ roof projection / cantilevers etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufcturer of exterior emulsion incuding preparation of old surfaces of wall complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Applying one coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.
Preparation of old plastered surfaces of walls and applying Two coats of cement base paint, complete all as specified and directed.
Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed
Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.
Rounding of / moulding to edges of stone of any description including rubbing and polishing (Granite finish) complete all as specified and directed.
Cleaning of water storage PVC service tank by disconnecting existing tank, setting aside (or lowering if reqd) for cleaning & removing the scale, dirt etc from tank & connecting & refixing in position. After cleaning, the date of cleaning with size of letters 3" to be written with synthetic enamel paint for capacity of tank exceeding 500 Ltrs but not exceeding 1000 ltrs complete all as directed by Engineer-in-charge.
Magnet catcher for cup board shutter, kitchen cabinets, ward robes in repair complete all as specified.
Demolition of RCC water tank of any capacity, removing all the rubbish and making good the surface with cement 1:2:4 as per existing specification complete all as specified and directed
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, complete all as specified and directed.
Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 15mm dia and fixed in repair complete all as specified & directed.
PVC connection 15mm size with PTMT nuts of length 450mm long fixed as in repairs complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness in roof coverings including ridges, all as directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Rolled sections as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed.
Anodized aluminium grill (anodised transparent of dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing window frame with C.P brass / stainless screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening complete all as specified and directed.
Dhingra Brothers
MS R G ENTERPRISES
Gunjan and Gunjan Associates
M/s Super Trading Corporation
M/S Hari Om Construction
KUNDRA CONSTRUCTIONS
PARVEEN KUMAR AND SONS
J.J.ENGINEERING
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .