Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹35.1 L+₹4.8 L (15.7%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 3 | Rejected-Technical 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | - | Rejected-Technical Not Recommended for opening of Financial Bid as enlistment category not fulfilled as per NIT |
Tender Value
₹31.6 L
EMD Value
₹63,500
Closing Date
22 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE(AF) BKT LUCKNOW
ROAD MARKING WATER BASED PAINT, TAXI TRACK, DISPERSAL LINKS RWH, SWT AND CONNECTED B/R REPAIR AS PER FIELD REQUIREMENT AND ESSENTIAL REPAIR TO ELECTRIC CONTROL PANEL, CONDENSER PUMPS AND OTHER CONNECTED WORKS OF AC PLANT AT AF STN BKT
2024_MES_647397_1
8750/BKT/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BKT
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹63,500
14 Sept 2024
21 Mar 2024
24 Apr 2024
21 Mar 2024
22 Apr 2024
4 Apr 2024
Amount
Cleaning by dewatering of staganated water from Rain water harvesting through suction truck/tanker of suitable capacity including removing all rubbish slurry water/debris and disposed off out side MOD land complete all as specified and as directed. Note:- The size of suction truck/tanker and depth of sludge in the each load and truck no shall be entered in the MB for arriving unit for payment purpose complete all as specified and directed.
Removing of top layer of coaurse sand by surface excavation not exceeding 30 cm deep and average 25 cm deep and getting out in mud complete all as specified and directed.
Supply & filling,spreading and lelling in layers not exceeding 25cm of moorum or red bajri under recharging chamber of Rain water harvesting complete all as specified and directed.
S&F 4mm dia galvanised steel wire of 150mm x 100mm mesh size made up into mattresses or cages,lapped,wired and laid in position including closing after filling complete all as specified and directed.
Removing excavated materials/soils exceeding. 500 m and not exceeding 1.5 km and depositing where directed at a level not exceeding 3.0 m above the standing point complete all as specified and directed.
Desilting of storm water drain by surface excavation in soft/loose soil settled deposited soil/earth/silt/mud etc. not exceeding 15cm deep from bed of drain,dressing in 'V' shape to drain including cleaning of shrubs,vegitation and grass etc. what so ever with therein,bed of drain including getting out and Removing excavated materials/soils not exceeding. 50 m and depositing where directed at a level not exceeding 1.50 m complete all as specified and directed.
Cleaning by dewatering sludge water from SWTs tank of dia 8.00 mtr to 10.00 mtr and depth 3.00 mtr to 4.50 mtr through diesel pumping set system and crew necessary for excavation burrying the night soil,removing all rubbish slurry water/debris and eashing through fresh water complete all as specified and directed.
M&L for PCC (1:2:4) Type B1 using 20mm graded stone aggregate as in mud stops,rounded or chamfered on edges including necessary formwork complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and rubbing with sand paper to make surface even and smooth and apply primer where required complete all as specified and directed.
M&L for two coats of white wash on wall newly plastered surfaces including preparation of surfaces complete all as specified and directed.
Material and labour for Applying one coats of white wash on old surfaces of wall including preparation of surfaces etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed.
M&L for Brickwork with old size sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius, built in cement mortar (1:6) complete all as specified and directed
M&L for repair Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) but except bricks complete all as specified and as directed.
M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc of any description complete all as specified and directed.
M&L for rendering 15mm thick on any faces of brick work or concrete surfaces in Cement Mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed
M&L 15mm thick rendering in cement mortar (1:4) on brick wall or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed
M&L preparation of new plastered surfaces of walls and applying two coats of Weather proof paint in camouflaging pattern (combination of three colour)over a coat of alkali resistant priming coat complete all as specified and directed
M&L for preparation of old plastered surfaces of walls and applying two coats of Weather proof paint in camouflaging pattern (combination of three colour) over a coat of alkali resistant priming coat complete all as specified and directed
M&L forpreparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any ht etc complete all as specified and directed.
M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) as approved by GE in writing complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality) or equivalent make as specified and approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality) or equivalent make as specified as approved by GE in writing. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by chemical/thiner including removal & cleaning etc complete all as specified and as directed.
M&L for scraping of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with two coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) as approved by GE in writing complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality) or equivalent make as specified as approved by G. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
Demolition of Cement Concrete unreinforced of any description and any position not otherwise specifically provided for and removing of rubbish from MoD permises complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate Cement concrete in surface channels and drains, or any other type and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in cills, steps; coping seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings copings, kneelers, apex stones, bed plates complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for sand filling in floors, 50 mm thick, spread levelled and well rammed including watering and consolidating complete all as specified and directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.
S&F for machine pressed precast concrete interlocking paver block coloured reflective type rubber moulded with Grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and directed.
M&L for factory made pre cast kerb stone of M-25 grade cement concrete as in position to the required line,level and curvature,jointed with cement mortar (1:3),includiing making joints with or without grooves complete all as specified and directed.
S & F repair mild steel framed work such as grill grating etc with ends of bars shouldered and or riveted, framed guard bars, frame of water tanks and similar works confirming to Fe-290 grade –E-165 complete all as specified and directed.
S & F repair Mild steel rolled sections as in framing for cladding and similar works to receive grills/grating works conforming to Fe-290 grade –E-165 complete all as specified and directed.
M&L for preparation of new steel surfaces and applying to two coats of synthetic enamel paint over a coat of red oxide Primer complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where required complete all as specified and directed.
S & F for stainless steel wire netting 1.23mm dia fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen grade 85/25 mixed with three parts of coarse sand by weight complete all as specified and as directed.
M&L for hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface using broken stones or boulders complete all as specified and directed.
M&L for 100mm thick cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in concrete pavement complete all as specified and directed.
M& L for servicing including repair/ maintenance of split type and window type air conditioning of 1.5 to 3 ton capacity by skilled mechanic with process cleaning evaporator / cooling coil ,condensor coil by using pressure pump ,clear water with copper friendly chemical solution for removing complete dust, checking function of all components, rectifying defect with replacement of defective parts (if found),charging of gas ,welding brazing etc except compressor complete all as specified and directed NOTE;- (i) Defective parts shall be measured and paid seperately as 'Supply Only' under respective item of Sch "A" given here-in-after. (ii) Payment for each job shall be made once only during currency of contract irrespective of attending / replacing defective parts at any time that will be paid supply only under respective item if not paid earlier. (iii) If required and repair is beyond at site taking out & refixing of AC / any repair shall be deemed to include in quoted rate.
Supply only the following parts/ items to be fixed under Item No 42 if required complete all as specified and directed. Supply only Starting capacitor of capacity 80-100 mfd for window/Split type room air conditioner complete all as specified and as directed.
Ditto all as per Item No 43 here-in-before but for capacity 4 mfd
Ditto all as per Item No 43 here-in-before but for capacity 6 mfd
Supply only Running capacitor of capacity 10 mfd complete all as specified and as directed.
Ditto all as per Item No 46 here-in-before but for capacity 20 mfd
Ditto all as per Item No 46 here-in-before but for capacity 36+5/6 mfd
Ditto all as per Item No 46 here-in-before but for capacity 45+5/6 mfd
Ditto all as per Item No 46 here-in-before but for capacity 50/55+5/6 mfd
Supply only Starting relay for 1.5 Ton window type AC complete all as specified and as directed.
Ditto all as per Item No 51 here-in-before but for split type AC
Supply only Refrigerant gas R-22
Supply only Refrigerant gas R-132a/ R-32
Supply only PVC braided flexible drain pipe 15 mm dia
Supply only Top Plug 3 pin 220 Volt 15 Amp
Supply only Industrial protected socket 3 pin 240 volt 20 Amp
Supply only Industrial protected plug top 3 pin 240 volt 20 Amp
Supply only Cable PVC insulated sheathed 3 core copper conductor size 70/0.0076 mm complete all as specified and directed
Supply only contactor single phase single pole 25 A ,220 Volt,50 Htz suitable for split AC out door unit complete all as specified and directed
Supply only Indoor blower motor for Split type AC 1.5 Ton capacity as existing make & model at site complete all as specified and directed
Ditto all as per Item No 61 here-in-before but for split AC 2.0 Ton Capacity
Supply only Blower motor for window type room air conditioner 1.5 Ton capacity as existing model at site
Ditto all as per Item No 63 here-in-before but for out door unit split type AC capacity 1.5 TR
Ditto all as per Item No 63 here-in-before but for out door unit split type ACcapacity 2.0 TR
Ditto all as per Item No 63 here-in-before but for Water cooler
Supply only air filter suitable for window/split type AC 1.5/2 Ton capacity all as per sample
Supply only Copper Pipe of size 5/8"( with sleeves)
Supply only of Copper Pipe of size 1/4"( with sleeves)
Supply only of Copper Pipe of size 1/2"( with sleeves)
Supply only Copper Pipe of size 3/8"( with sleeves)
Supply only insulation for cooper tube of size 1/4" or 1/2" or 3/8" or 5/8" dia
Supply only condenser Fan Suitable for Split Type AC any capacity
Supply only blower for split AC 1.5 Ton capacity for indoor unit
Supply only blower for split AC 2 Ton capacity for indoor unit
Servicing& cleaning of water cooler of any capacity and any make at site cleaning the equipment, checking wiring , running and starting capacitor, thermostatic switch condensor motor, blower fan, rectification of fault replacement of spare and charging of gas as on required basis, connecting & testing on load for performance complete all as specified and directed Note : Spare parts shall be measured and paid separately as supply only under respective items of Sch 'A' given here-in-after.
Servicing & cleaning of Deep freezer any capacity any make model cleaning complete all as specified and directed Note : Spare parts shall be measured and paid separately as supply only under respective items of Sch 'A' given here-in-after.
S&F Wood wool pad set suitable for desert cooler heavy duty including dismantling the old unserviceable wood wool pad set complete all as specified and directed
Supply &fix submersible pump for desert cooler (in replacement) for lifting water upto 1.2 meter head complete all as specified and directed
Supply & fix kit fan motor single phase 230 V AC ,Copper wound ,900 rpm for Desert cooler
Supply & fix exhaust motor single phase 230 V AC ,Copper wound ,18 inch,1400 rpm for Desert cooler complete all as specified and directed
Ditto all as per Item No 82 here-in-before but suitable for plastic body Desert cooler of as existing at site of superior quality 3 speed motor complete all as specified and directed
Disconnecting, cutting and taking out unserviceable sealed unit compressor of split type Air conditioner 1.5 Ton capacity of any make & model and supply and fixing new compressor of same make as existing at site for window type air condition 1.5 Ton capacity soldering, welding, brazing as required including charging of refrigerant gas and in the exchanged compressor, making electric & mechanical connections of air conditioner at site and testing on load complete all as specified and directed.
Ditto all as per Item No 84 here-in-before but for split type AC 2.0 Ton Capacity
Ditto all as per Item No 82 here-in-before but for Water cooler of storage capacity 40-80 ltr/ 60-120 Ltr
S & F in repair Circuit board PCB of Split Type AC complete for 1.5/2.0 TR Split type A/C and complete all as specified and directed
S & F in repair Circuit board PCB complete set for indoor & outdoor of inverter type Split AC as existing at site of capacity 1.5/2.0 TR Split type A/C complete all as specified and directed
Repair and maintenance of Circuit board PCB complete for 1.5/2.0 TR Split type A/C and complete all as specified and directed
S&F Indoor unit of split type AC of capacity 1.5 TR including copper evaporator coil ,blower ,blower motor,controling circuit of AC complete all as specified and directed
Ditto all as per Item No 90 here-in-before but for Capacity 2.0 TR
Cutting, disconnecting & taking out the condensing unit of split type room air conditioner 1.5/2 Ton capacity and providing the new copper condensing unit of exsting size model in place including welding, brazing etc and tdesting on load complete all as specified and directed
Ditto all as per Item No 92 here-in-before but for evaporator coil
Ditto all as per Item No 92 here-in-before but for water cooler
S&F in repair wall mounted digital display voltage stabilizer copper winding, for automatic voltage correction single phase, naturally air cooled, indoor type, designed for input voltage between 140 Volt to 280 Volts and out put voltage 230Volt and High / low voltage cut off with facility of including instant start & time delay relay of 3 minute capacity 5 KVA complete all as specified and directed
Ditto all as per Item No 95 here-in-before but for 4 KVA
S&FSheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed.
Disconnecting, dismenteling and Taking out functional split type AC and reassembling fixing and testing inclding installation of AC in new position/location after making necessary cutting/opening in wall including welding and brazing of copper pipe including charging of gas (if required) complete testing and making good to match with existing surface all as specified and directed Note;- The rate for above item are deemed to be include for necessary servicing cleaning & replacement of necessary u/s screw/nut/bolt/washer etc with new one,brazing of cooper pipe,transportation to any location inside AF campus complete all as specified and directed
S&F in repair to remote circuit complete with remote device for 1.5/2 TR window/split type AC and complete testing as per directed
S&F in repair MCB protected socket combination including MCB of capacity 25 amps withsteel sheet/plastic enclosure with plug topAC 230 V complete all as specified and directed
S&F in repair MCB single pole, 20 to 32 Amps, 240 Volts 50 HZ, 'C" series 10 KA breaking capacity complete all as specified and directed
National Rewinding Works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .