Renovation Works at 5th floor and reception area, Intellectual Property Office, Antop Hill, SM Road, Mumbai

Name of Work : Interior and Renovation Work for the office of IPO at Mumbai for 5th floor,

Library and Reception Hall etc

DETAILED SUMMARY

S.No. Sub-Head NDSR Amount (in Rs.)

1 Civil & Interior Works 58,92,108.28 31,55,783.41

SANITARY FIXTURES & FITTINGS and

6 Furniture Work 0.00 1,04,79,695.74

7 FIRE FIGHTING 0.00 1,80,559.44

Add GST Multipluing factor of 1.0633 1,54,17,513.48

TOTAL i/c GST 3,65,00,000.00

Digitally signed by AMIT

SINGH 19:24:33 IST

Civil & Interior Works

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

CIVIL AND INTERIOR

1.0 DISMANTLING DEMOLISHING

Taking out doors, windows and clerestory window shutters (steel or

wood) including stacking within 50 metres lead :

15.13.2 Of area beyond 3 sq. metres each 155.75 14.00 2,180.50

Dismantling aluminium / Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable surplus

1.2 15.57 material and stacking of serviceable material with in 50 meters lead sqm 46.50 680.00 31,620.00

as directed by Engineer-in-Charge.

Carriage of material by mechanical transport including loading

unloading and stacking

1.1.1 Lime, murrum, building rubbish - -

2 MASONRY AND PLASTER - -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural

2.1 4.1.4 sources : 4 graded stone aggregate 40 mm nominal size derived Cum 7,226.95 30.00 2,16,808.50

from natural sources)

Half brick masonry with common burnt clay F.P.S. (non modular)

2.2 6.13 bricks of class designation 7.5 in superstructure above plinth level up - -

to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 1,018.05 58.00 59,046.90

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single

or half brick wall of mix.

2.5 13.4 12 mm cement plaster of mix - -

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases up to floor

five level excluding the cost of centering, shuttering, finishing and

reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and

removal of form for :

2.8 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 608.35 10.10 6,144.34

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Steel reinforcement for R.C.C. work including straightening, cutting,

2.9 5.22A bending, placing in position and binding all complete above plinth - -

5.22A.4 Hot rolled deformed bars kg 89.65 100.00 8,965.00

Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and the

like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of

vertical and horizontal surface. (ii) IInd course of 20 mm cement

plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing

compound in recommended proportion including rounding off

junction of vertical and horizontal surface. (iii) IIIrd course of applying

blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv)

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and

compacting Foam Concrete for raising level of toilets and pantry

2.11 MR and finishing in a coat of lean concrete screeding with CUM 7,368.93 8.00 58,951.47

waterproofing compound complete in all respects to take Tile

Flooring as per flooring specifications.

3 PAVING AND WET WORKS - -

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-

in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed

of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed

Ceramic floor tiles of size 300x300 mm or more (thickness to be

specified by the manufacturer), of 1st quality conforming to IS :

15622, of approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1

Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including pointing the joints with white cement and matching

pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 %

and conforming to I.S. 15622, of approved make, in all colours &

3.5 11.46 shade, in skirting, riser of steps, over 12 mm thick bed of cement - -

mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

3.6 11.48 (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / - -

grouting and finishing complete as per direction of Engineer-in-

Providing and fixing removable raised/false access flooring with

system and its components of approved make for different plenum

height with possible height adjustment upto 50 mm,comprising of

3.7 11.54 modular load bearing floor panels supported on G.I. rectangular - -

stinger framework and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and asdirected by Engineer-in-

charge consisting of:

(a) Providing at required spacing to form modular framework,

pedestals made out of GI tube of thickness minimum 2 mm and 25

mm outer diameter, fully welded on to the G.I. Base plate of size

100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mmx75mmx3.5 mm welded with GI fully

threaded stud 16mm outer diameter with two GI - -

Check nuts screwed on the stud for level adjustment upto 50mm,

locking and stabilizing the pedestal head in position at the required

level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the

machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends

for securing the stringers on to the pedestal head using fully

threaded screws ensuring maximum lateral stability in all directions,

formed by the pedestal and stringer assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for

access floor panel, the system shall provide a minimum clear

uninterrupted clearance between the bottom of the floor for

electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by the Engineer-

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

(c) Providing and fixing Access Floor panel of 600x600x32 mm

medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded

construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of Steel Gauges:

top 0.6 mm and bottom 0.7 mm fused spot welded together

(minimum 64 welds in each dome and 20 welds along each flange).

The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled

with Pyrogrip noncombustible Portland cementitious core mixed with

lightweight foaming compound. The access floor shall be factory - -

finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface

flatness within 0.75mm.The panel is to withstand a Concentrated

Load of 363 kgs applied on area 25mm x 25mm without collapse in

the centre of the panel which is placed on four steel blocks. The

panel will withstand and Uniformly Distributed Load (UDL) minimum

1250 kg/sqm and an impact load of 50kg all complete as per the

approved manufacturers specification and as per the direction of

Engineer-in-charge. All specification must be printed on the side of

the panel to ensure the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) SQM 5,094.08 8.00 40,752.64

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing

pantry and toilets with Granite stone top (with straight edge polished

nosing) complete with base cabinet made of 20mm BWP board,

outside surface (shutters) finished in 1mm thick Laminate of

3.8 MR approved shade. All internal surfaces to have balancing laminate. RMT 14,550.05 6.00 87,300.29

The rate inclusive of necessary hardware, handle lock sets, self

closing hinges, spring loaded shutter, latch inside, all cabinet

hardware complete as per approval of engineer in charge . Width

of work top counter 600mm/ detailed drawings.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of the

building all complete as per the architectural drawings with 18 mm

3.9 11.56 thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of

matching shade including rubbing , curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @

3.1 8.9 3.3 kg/sqm including pointing in white cement complete.

8.9.1.2 Granite of any colour and shade: 8mm Thick sqm 3,105.50 80.00 2,48,440.00

4 PARTITIONS AND WALL CLADDING - -

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling

height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and

placed at a spacing of 610 mm centre to centre by 6 mm dia bolts

and nuts, including fixing of studs along both ends of partition fixed

flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450 mm centre to centre, and fixing of boards to

both side of frame work by 25 mm long dry wall screws on studs,

floor and ceiling channels at the spacing of 300 mm centre to

The boards are to be fixed to the frame work with joints staggered to

avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm

thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush - -

finish with recommended jointing compound, jointing tape, angle

beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two

coats of primer suitable for board as per manufacture's specification

and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire

9.105.1 rated Glass Reinforced Gypsum (GRG) plaster board conforming to SQM 1,797.65 22.00 39,548.30

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Gypsum Panelling:-Providing and fixing, in position concealed G.I.

section for wall paneling using board of required thickness fixed on

the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm

and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610

mm C/C in perimeter channel having one flange of 20 mm and

another flange of 30 mm with thickness of 0.55 mm and web of

4.2 9.133 length 27 mm. Perimeter channel is fixed on the floor and the ceiling - -

with the nylon sleeves @ 610 mm C/C with fully threaded self-

tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm

countersunk ribbed head screws @ 200 mm C/C., all complete as

per the drawing & directions of engineer-incharge, the joints of the

boards are finished with specially formulated jointing compound

and 48 mm wide jointing tape to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I - -

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

4.3 9.1 with hold fast lugs or with dash fasteners of required dia & length - -

(hold fast lugs or dash fastener shall be paid for separately).

4.4 9.1.1 Second class teak wood cum 1,31,576.95 0.70 92,103.87

INSULATION- Providing and fixing thermal insulation with Resin

Bonded rock wool conforming to IS: 8183, having density 48

kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to

wall wirh screw, rawel plug & washers and held and in position by

criss cossing GI wire etc. complete as per directions of Engineer-in-

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer

(medium density) particle board or graded wood particle board IS :

3087 marked, with one side decorative and other side balancing

lamination Grade I, Type II exterior grade IS : 12823 marked, in

shelves with screws and fittings wherever required, edges to be

painted with polyurethane primer (fittings to be paid separately).

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction

4.11 9.21 with frame of 1st class hard wood and well matched commercial 3 - -

ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Providing and fixing aluminium extruded section body tubular type

universal HS 3000 Slimline Concealed Door Closer (having brand

logo with ISi, IS : 3564,embossed on the body, door weight upto 36

2.40 MR kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double each 7,200.02 12.00 86,400.29

speed adjustment with necessary accessories and screws etc.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI

2.50 9.97 marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or - -

dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging

stopper with necessary screws, etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular

Handle TH 123 with Roses & Escutcheon in SS packaged with Mortice

2.70 MR lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder EACH 3,250.01 12.00 39,000.13

for all flush doors.

Providing and fixing 600 mmx25 mm H Type handle for Doors

approved make and designs as per engineer in charge

4.00 CEILING - -

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of

size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange

of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle

4.1 12.45 hanger fixed with intermediate G.I. channels 45x15x0.9 mm running - -

at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

12.5 mm thick tapered edge gypsum plain board conforming to IS:

12.45.1 2095- (Part I) :2011 (Board with BIS certification marks) sqm 1145.95 Sqm 1,145.95 300.00 3,43,785.00

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Providing and fixing mineral fibre false ceiling tiles at all heights of

size 595X595mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance ?

85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of

0.33 mm thick (galvanized @120 gsm) comprising of main T runners of

15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200

mm and secondary intermediate cross T of size 15x32 mm of length

600 mm to form grid module of size 600x600 mm suspended from

ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm

long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully

threaded hanger rod up to 1000 mm length and L-shape level

adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre

along main ‘T’. The system should rest on periphery walls /partitions

with the help of GI perimeter wall angle of size24x24X3000 mm made

of 0.40 mm thick sheet, to be fixed to the wall with help of plastic

rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.

screws. The exposed bottom portion of all T-sections used in false

ceiling support system shall be pre-painted with polyester baked

paint, for all heights. The work shall be carried out as per

specifications, drawings and as per directions of the engineer-in-

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC

Baffle Ceiling-Providing and fixing of Baffle ceiling system comprises

of 40mm x100mm (40mm width & 100mm Height) U Shape panels.

Panels shall be made of 0.5mm thick galvanized steel Powder-

coated and length upto 3600mm. Panel shall be high corrosion

resistance and good color stability. Centre to Centre panel gap will

be 150mm. Panels are fixed on to roll formed carriers 20mm wide x

40mm deep out of 0.80mm G.I sheet Powder-coated color with

cutouts to hold the panels in module of 50 mm at maximum 1200 m

c/c. Carriers are suspended from the roof or truss by 4mm dia.

galvanized steel wire rod hanger with special height adjustment

suspension clip at max.1200mmc/c. Hangers are fixed to the roof by

"J" hooks or ceiling brackets and nylon inserts. Panels are factory cut

in lengths upto maximum 3.6m to suit site dimensions or

shopdrawings.Top cap and side cap are used to cover the edges of

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling

@1000mm centre to centre with 1 nos of 12mm thk. fire retardant ply

4.3 MR on vertical & 12mm thk. Commercial ply on horizontal surface RMT 960.00 31.41 30,150.10

(straight & curved). Inclusive of finishing in Paint.

Providing the gypsum double sided cove of 150mm x 150mm having

4.4 MR a facia of 75mm to macth the specifications same as above RMT 675.00 62.00 41,850.14

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all

round the mineral fibre/ gypsum ceiling. In order to make the

Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by

4.5 MR upto 100mm as per drawings. (visible surface of gypsum band to not RMT 395.00 92.00 36,340.12

exceed 100mm) including plastic emulsion paint.

5.0 FINISHING WORKS - -

Providing and applying plaster of paris putty of 2 mm thickness over

5.1 13.26 plastered surface to prepare the surface even and smooth sqm 214.30 630.00 1,35,009.00

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50

5.2 13.83 grams/ litre of approved brand and manufacture, including - -

applying additional coats wherever required to achieve even shade

Applying priming coats with primer of approved brand and

5.3 13.85 manufacture, having low VOC (Volatile Organic Compound ) - -

With ready mixed pink or grey primer on wood work (hard and soft

wood) having VOC content less than 50 grams/ litre

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

WALL PANELING :-Providing and fixing Paneling upto ceiling height

consisting of Aluminium frame and required board, frame work

made of Aluminium section made of 50x25 mm , consisting of floor

and ceiling channel 50mm wide having equal flanges of 25 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610

mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs

and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a spacing of 610 mm

centre to centre by 6 mm dia bolts and nuts, including fixing of studs

along both ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of 450 mm

centre to centre, and fixing of boards to both side of frame work by

25 mm long dry wall screws on studs, floor and ceiling channels at

the spacing of 300 mm centre to centre. The boards are to be fixed

to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick having two flanges of

9.5 mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x

0.5 mm), joint finisher as per manufacture's specification and

direction of engineer in charge all complete.(Cost of Aluminium

framing 600X600mm Paid saperately)

Paneling with 12 mm thick HDHMR board to IS: 5509

Providing & Fixing decorative high pressure laminated sheet of plain

/ wood grain in gloss / matt/ suede finish with high density protective

5.5 9.127 surface layer and reverse side of adhesive bonding quality - -

conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Providing and fixing 12mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor spring

type fixing arrangement and making necessary holes etc. for fixing

5.6 21.18 required door fittings, all complete as per direction of Engineer in sqm 4,540.70 20.00 90,814.00

charge (Door handle, lock and stopper etc. to be paid separately)

Providing glass door / Partions wherever required 12 mm thickness

5.7 MR including all fittings, frames etc. as per direction of EIC sqm 9,355.08 30.00 2,80,652.27

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in

5.8 8.31 skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 1,063.45 50.00 53,172.50

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

Providing and Fixing corean stone as per the size, colour and design

approved by client/ Engineer in Charge

Providing and fixing wall paneling and partition frame work made of

5.10 MR 25x50 mm aluminium section 600x600mm c/c distance as per SQM 834.76 250.00 2,08,690.50

Mirror polishing on marble work/Granite work/stone work where ever

5.11 8.6 required to give high gloss finish complete SQM 417.60 250.00 1,04,400.00

6.0 MISCELLANEOUS WORKS - -

BLINDS Providing & supplying of Window Blinds as per the approved

sample in required shade and style consisting, of Roller Blinds

comprising of optima screen Fabric comprising of 22% polyester, 78%

PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm,

Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89

small testing ISO-5659-2 .Thetear resistance should be complying to

ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of

clutch for quick, easy and safe installation, moulded plastic with

steel spring support and inserted into the tube end. It shall be driven

by a ball chain pulley with ball chain and can be positioned at right

side or left hand side of the Shade. The Shade when lowering or

raising, shall be automatically locked in position upon release of the

ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG

shall be molded of plastic witha steel location pin.The plug shall be

inserted into the tube end.(Opposite to the Drive Unit) for ease of

installation. The SUPPORT BRACKETS shall be of coated steel &

provided with covers and used in right hand or left hand positions

differentiated by the acceptance of the of the rectangular drive

unit support or the round idler plug pin.Can beinstalled (a) On Face

(b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be

protruding outside maximum of 80mm.The ROLLER TUBE shall be of

extruded aluminum with 37mm internal diameter & skin thickness of

1mm and shall incorporate a key way integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom

made up of powder coated steel. The BALL CHAIN shall be 2mm

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over

6.2 M.R. glass surface as approval of the Architect. (Only film surface area SQM 2,250.01 18.00 40,500.17

shall be measured and paid).

Digitally signed

SINGH 19:24:33 IST

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm

Laminate of matching, Shutters to be fixed to a frame. Rigidly fixed

on both sides and top finshed in laminate. No internal carcass

required. All Hinges of hettich or equivalent. Internal Surface of the

6.3 MR shutter in balancing white laminate. All shutters to be provided with SQM 14,342.05 2.00 28,684.10

Stainless steel louvers at the top and bottom of the shutter as per the

site requirements and instrcution of the Engineer In charge.

Providing & fixing imported decorative Poly décor fabric Wall

Paper (on walls and ceiling) of weight 475 g /sqm as per approved

shade & design including prepration of surface with 2 coats of Nubin

Glue based epoxy quote.

Providing and fixing of 4,6 mm thick annealed GRIHA rated

lacquered glass manufactured industrially by curtain coating

process with PU lacquer (50 micron thick), opaque (if viewed against

a support wall) conforming to EN 16477 standards for back painted

glass , of approved color by Architect/ Client fixed with compatible

Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450

kpa and tack free time of 10 to 30 mins compatible for installation of

mirror and lacquered glass / Foam based double sided adhesive

tape for instantaneous adhesion, compatible with mirror and

lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to

350 kpa) on a perfectly leveled 12mm thick water proof marine

plywood / MDF / Mineral fibre board which is mounted on the RCC

wall/any other structure. The contractor should submit test reports for

backpainted glass from manufacturer - High humidity Resistance

(conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard &

Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 (

Cross Hatch Test ) standard The manufactured backpainted glass

should be environmentally friendly (no lead, no arsenic, no copper,

noformaldehyde); appropriate recycled content (12% post industrial

/ 6% post consumer); compressive strenght (1000 MPa) & tensile

strenght (40 MPa),same as float glass

Providing and fixing Aluminium Skirting 100 mm ht - Groove skirting -

6.6 MR Natural Anodized Finish (Make- as per make list or equivalent) RMT 811.00 175.00 1,41,925.48

dismenteling existing work station and re instollation of dismenteled

workstation as per direction of site in charge

transportation cost of shifting workstation or office assests in cluding

6.8 MR loading and unloding as per direction of comitee. Rate will be KM 68.83 1,500.00 1,03,250.00

calculate per km 4 tr vehicle

Digitally signed

SINGH 19:24:33 IST

SANITARY FIXTURES & FITTINGS and WATER SUPPLY

2021/N DESCRIPTION OF ITEMS UNIT Total Qty NDSR Amount DSR Amount

Providing & fixing glazed vitreous china single trap

syphonic pattern having back inlet ,supporting

chair ,wall hung water closet with cistern

complete with all internal fittings/accessories and

CP brass flush bend (European type) water closet

with seat and lid, with C.P. brass hinges and rubber

buffers, adapter, rubber joints fixed to W.C., C.P.

brass screwed washers including cutting and

making good the walls and floors wherever

required and HDPE wc pan connector including

jointing with white cement coomplete in all

Wall hung W.C. pan (White colour)with white

plastic seat & lid "Thermoset moulded ( bakelite )

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 23,196.90 8.00 1,85,575.16

Table top wash basin (white colour)of size: 440x440

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 9,998.53 12.00 1,19,982.37

Providing & fixing 15mm C.P. brass single hole

wash basin mixer without popup waste system

with 450mm long copper pipes and brass nut - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 4,253.69 12.00 51,044.32

Providing & fixing vitreous chinaware urinal

1.4 NS comprising - -

Large flat back wall hung urinal in glazed vitreous

NS China new magnum urinal - -

15 mm electrically operated solenoid valve with

infra red sensor mounted in a box with SS Cover. - -

CP brass chromium plated flush piping from

solenoid valve to urinal terminated with a 15 mm

screwed spreader - -

32 mm nominal bore CP cast brass waste - -

32 mm nominal bore CP cast bottle trap with

extension pipe rubber adopter for waste

connection, CP brass wall flange. - -

For supply,installation,testing & commissioning of

sanitary fixtures(white colour) as per above details.

Providing & fixing Sink Mixer with Swinging Casted

Spout (Wall Mounted Model) with 450mm long

Copper Pipes & Brass Nuts.CP brass wall flange - -

2021/N DESCRIPTION OF ITEMS UNIT Total Qty NDSR Amount DSR Amount

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 5,077.72 3.00 15,233.17

Providing & fixing toilet paper holding including

1.7 NS cutting and making good the walls. - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 1,983.09 6.00 11,898.54

Providing & fixing Horizontal liquid soap dispenser

1.8 NS with stainless steel lid and brackets fixed to

wooden cleats with C.P. brass screws. - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 3,549.72 4.00 14,198.86

Providing & fixing C.P. brass coat hooks fixed on

1.9 NS toilet door with C.P. brass screws - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 605.14 16.00 9,682.21

Providing & fixing beveled edge mirror 5.5mm

thick of superior quality plate glass complete with

1.10 NS 6mm thick marine ply sheet ground fixed to

wooden cleats with CP brass screws and

washerswith 40 mm wide teak wood frame as per

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Sqm 2,471.91 5.00 12,359.53

Providing & fixing Hand Shower (Health Faucet)

1.11 NS with 8mm dia, 1M long PVC tube and wall hook

CP brass wall flange -

For supply of sanitary fixtures as per above details

Providing & fixing, testing and commissioning of

storage type electric water heater with automatic

1.12 NS thermostatic control electric element, pressure

release valve, brackets fixed to expansion

fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls

25 litres capacity (Horizontal /Vertical type1.5 kw

electrical load). - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 18,849.34 4.00 75,397.37

Providing & fixing 15 mm dia C.P. brass bib cock

with Hose union of approved quality. - -

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 1,376.24 6.00 8,257.46

Providing & fixing 15 mm dia C.P. brass bib cock

1.15 NS with C.P. wall flange of approved quality.

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 1,556.25 6.00 9,337.52

2021/N DESCRIPTION OF ITEMS UNIT Total Qty NDSR Amount DSR Amount

FRAGRANCE DISPENSER MACHINE :-Providing and

fixing of Fragrance Dispenser machine complete

1.16 NS with refill can and 'C' size battery (2 Nos) for

operation fixed to wooden cleats with CP brass

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 4,492.66 4.00 17,970.62

Providing and fixing of stainless steel finish Paper

Towel Dispenser having capacity of 300-350 paper

1.17 NS towels fixed to wooden cleats with C.P. brass

For supply,installation,testing & commissioning of

sanitary fixtures as per above details. Each 5,501.41 4.00 22,005.65

Water Supply - -

Providing and fixing Chlorinate Polyvinyl Chloride

(CPVC) pipes having thermal stability for hot &

cold water supply including all (CPVC) plain &

brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including

jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as

per direction of engineer in charge. .

Internal Work - Exposed on Wall - -

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing Chlorinate Polyvinyl Chloride

(CPVC) pipes having thermal stability for hot &

cold water supply including all CPVC plain &

brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This including jointing of

2 18.8 pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and

making good the the same including testing of

joints complete as per direction of engineer in

Concealed work oncluding cutting chases and

making good the walls etc. - -

20 mm nominal outer dia pipes.

Providing and fixing brass stop cock of approved

quality complete. - -

Providing and fixing gun metal gate valve with C.I.

4 18.17 wheel of approved quality (screwed end):

2021/N DESCRIPTION OF ITEMS UNIT Total Qty NDSR Amount DSR Amount

4.1 18.17.1 25 mm nominal bore Each 532.35 - -

4.2 18.17.2 32 mm nominal bore Each 589.90 - -

Providing and fixing unplasticised P.V.C

5 18.74 connection pipe with PTMT Nuts coller and bush of

approved quality and colour. - -

18.74.2 15mm nominal bore with 45cm length Each 107.90 11.00 1,186.90

Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush

17.5 pipe, spreaders with unions and clamps (all in C.P. brass)

with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including painting

of fittings and - -

Single half stall urinal with 5 litre P.V.C. automatic flushing

17.5.1 cistern Each 10128.30 - -

The Pipes will be supported with threaded G I rods & U

clamps with nuts, washers etc on 50x50x5 mm slotted

NS angle. The cost will include all support arrangements.

The work includes commissioning of all pipes lines as

per drawings and specifications and as directed by - -

110 mm dia (Wall at Thickness

75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METER 935.51 272.00 2,54,458.49

Providing, fixing, jointing and testing in position ISI

marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm

rating with fitting for waste pipe from fixtures to floor

NS trap including reduces, enlarger, socket, couplers,

bends, tees etc including fixing at wall/ ceiling level

supported by clamp & hangers etc. cutting holes in wall/ - -

dia. and making good the same with cement

Providing & fixing UPVC Floor trap of self cleansing

design with stainless steel grating complete in all

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with

NS EACH 705.23

Extra for providing & fixing 125 mm dia C.P. grating in

NS EACH 777.19

place of C.I. grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or

square with rubber seal and flat round cover with

NS EACH 1266.54

screws and other required fitting complete as required.

providing and fixing toilet cubical made of 12 mm

NS boiling waterproof board with necessary hardware as EACH 38139.92

per direction of engineer in charge 2.00 76,279.85

Electrical/FA/PA

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

1.0 DISTRIBUTION BOARDS.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

1.4 having a sensitivity current 30 mA in the existing MCB DB - -

complete with connections, testing and commissioning etc. as

2.0 CABELS / MAINS - -

Supply ,laying,testing and commissoning of 1100V grade

armoured cable having sector / circular shaped aluminium /

copper conductor PVC insulated cores under ground PVC tape

wrapped inner sheathed, GI strip / wire armoured and overall - -

extruded PVC sheathed confirming to IS: 1554, laid on wall or

ceiling using GI clamps and spacers as per route shown at site

and further as directed by Engineer-in charge

2.1 MR 16 Sq.mm 4 core copper cable mtr. 825.00 266.00 2,19,450.00

2.1 MR 25 Sq.mm 4 core copper cable mtr. 1,450.00 209.00 3,03,050.01

4.0 WIRING - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

4.1 1.10 modular switch, modular plate, suitable GI box and earthing the - -

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

a 1.10.3 One light point controlled by one 6A switch Per Pts 1,467.00 62.00 90,954.00

Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper

4.2 1.54 conductor single core cable in surface/ recessed steel conduit, - -

and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 327.00 935.00 3,05,745.00

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for twin control point wiring using 1.5 sqmm copper

conductor FRLS PVC insulated copper conductor cable drawn

through 25 dia MS conduit laid in surface/concealed over false

4.4 1.4 ceiling or in slab/wall chases including ,2way modular Per Pts 1,981.00 26.00 51,506.00

switches,modular plate ,suitable GI box and earthing the point

with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the

4.5 1.24 existing modular plate & switch box including connections but - -

excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 122.00 70.00 8,540.00

d 1.24.5 6 pin 15/16 A socket outlet Each 197.00 90.00 17,730.00

Supplying and fixing following size/ modules, GI box alongwith

4.6 1.27 modular base & cover plate for modular switches in recess etc. as - -

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends

upto 15m length or as per site requirement

5 LIGHTING FIXTURES - -

LINEAR LIGHT 28-36W as per the specifications and direction of

Engineer In-charge

Supply, Installation, Testing and Commisioning of pre-wired round

shape Surface Mount 15Watt LED Down Lighter fitting complete

with all accessories, housing made of Aluminium Die-cast, System

Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,

The luminare rated life (L70) >50000 Hours with High efficiency

5.2 MR driver with inbuild surge protection, over voltage protection, short NOS 1,470.91 42.00 61,778.04

circuit protection and operating at >0.95 PF., BIS approved Driver

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc as required.

Supply, Installation, testing and Commisioning of 1.2 mtr 4 feet

long Batten light Cove Light: Supply of natural white

5.3 MR 3000/4000K/6500K Luminaire) and system efficiancy better than Nos 850.00 140.00 1,19,000.00

100 LPW, Low Voltage 12VDC system, with Thermo-conductive

adhesive complete etc. as required.

Supply, Installation, Testing and Commisioning of pre-wired round

shape Surface Mount 18Watt LED Down Lighter fitting complete

with all accessories, housing made of Aluminium Die-cast, System

Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,

The luminare rated life (L70) >50000 Hours with High efficiency

5.4 MR driver with inbuild surge protection, over voltage protection, short NOS 2,100.00 56.00 1,17,600.00

circuit protection and operating at >0.95 PF., BIS approved Driver

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc as required.

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. Supply, Installation, Testing and Commisioning of 300X1200 36-

40Watt LED fitting complete with all accessories, housing made

of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of

4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70)

5.5 MR >50000 Hours with High efficiency driver with inbuild surge NOS 6,116.78 30.00 1,83,503.41

protection, over voltage protection, short circuit protection and

operating at >0.95 PF., BIS approved Driver including connection

with 1.5 sq. mm FR PVC insulated, copper conductor, single core

cable and earthing etc as required.

6 WIRING FOR DATA AND VOICE OUTLETS - -

Supply and fixing the following sizes of PVC medium duty ISI

marked conduits (IS : 9537 Part-III) complete with accessories

6.1 such as bends, junction boxes, pull boxes etc., in recess or on - -

surface including cutting chases in the walls/floors and making

good the same complete as required.

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4

6.2 1.53 pair LAN Cable in the existing surface/ recessed Steel/ PVC - -

conduit as required.

Supply & fixing of Plug in type information outlet (campatible with

6.3 MR data cables) in existing faceplate/ GI Box in wall/furniture/floor Nos. 582.51 84.00 48,930.79

complete as required.

Supplying and fixing following modular switch/ socket on the

6.4 1.24 existing modular plate & switch box including connections but - -

excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 148.00 70.00 10,360.00

Supply and fixing of the following types Face Plates complete

with all accessories.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for

voice) or as required square plate having spring shuttered front

a. MR access for preventing ingress of dust, dimension as per Nos. 90.04 100.00 9,003.96

commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50

pair multi core 0.61 mm annealed copper conductor PVC

insulated and PVC sheathed armoured telephone cables

6.6 MR generally conforming to ITD S/WS-11-C and IS 1554 part I direct in mtr. 457.57 530.00 2,42,509.79

ground /surface and / or in existing pipe as required and includig

making terminal joints, complete as required.

Supplying, installing, testing and commissioning of 24 port Cat 6A

patch panels available with block of four equipped with tool less

6.7 MR IO, Rack Mountable. 19" Modular Patch Panel, loaded CAT6A EACH 16,491.19 12.00 1,97,894.33

U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6

X RJ 45 Tool less connector U/UTP unit in a block.

7 CABLE TRAY.& RACE WAY. - -

4.1 upplying and installing following size of perforated painted

with powder coating M.S. cable trays with perforation not more

than 17.5%, in convenient sections, joined with connectors,

7.1 suspended from the ceiling with M.S. suspenders including bolts - -

& nuts, painting suspenders etc as required.

GI Raceway & Junction boxes ( Raceway on floor shall be of

aluminium only)

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

MR Providing and fixing 2 mm thick steel sheet factory fabricated

post galvanized raceway with internal partition/compartmentized

of the following sizes including providing removable 3 mm thick GI

cover, knock out holes and fixing accessories earthing with 8 SWG

copper earth wire complete as required including floor supports, - -

bends, access boxes, tap off boxes and cross over as per

specification and site requirement. (overhead / wall mounted

recovery & function boxes shall be 1.6 mm thick)

a) MR 300 mm wide x 38 mm deep raceway or as per site RM 2,506.51 72.00 1,80,468.91

b) MR 225 mm wide x 38 mm deep raceway or as per site RM 2,110.89 72.00 1,51,984.35

c) MR 150 mm wide x 38 mm deep raceway or as per site RM 1,603.10 114.00 1,82,753.42

d) MR 100 mm wide x 38 mm deep raceway or as per site RM 175.10 114.00 19,961.57

MR Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet

7.3 junction box including providing 3 mm thick stainless steel cover Nos. 3,990.62 32.00 1,27,699.85

as per specification.

MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI

7.4 sheet junction box including providing 3 mm thick stainless steel Nos. 1,874.51 32.00 59,984.27

cover as per specification.

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : - -

Supplying, installation, testing & commissioning of intelligent Pcs

1 17.2.4 analog addressable photothermal detector complete with 2858.00 80.00 2,28,640.00

mounting base complete as required.

Supplying, installation, testing & commissioning of addressable Pcs

manual call point complete as required.

Supplying, installation, testing & commissioning of addressable Pcs

horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator Pcs

complete with base as required.

Supplying, installation, testing & commissioning of response Pcs

5 17.2.5 indicator on surface/recessed MS Box having two LED, metallic 276.00 6.00 1,656.00

cover complete with all connections etc as required.

Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including

detectors) and minimum 120 detectors per loop and loop length

up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other

keypad and minimum 4000 events history log in the non volatile

6 17.2.1 memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs - -

back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect

printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete

with all accessories . The panel shall be compatible for IBMS

system with open protocol BACnet/ Modbus over IP complete as

B CABLES & ACCESSORIES FOR FAS : - -

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM

600/1000V rated with annealed copper conductor having

6 17.5.2 XLPE insulation, steel wire armouring & FRLS outer sheath 173.00 910.00 1,57,430.00

complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES : - -

Supplying, installation, testing & commissioning of Pcs

7 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS 2428.00 37.00 89,836.00

enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM - -

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed

17.5.3 steel conduit of following pairs, cores and size including - -

connections and interconnections etc. as required..

8 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 54.00 790.00 42,660.00

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. Supplying, installation, testing & commissioning of digital Each

9 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt AC 96779.00 3.00 2,90,337.00

supply complete as required.

Supplying, installation, testing and commissioning of cubical type

MV Panel as per IEC:61439-I made out of 14 SWG sheet steel,

totally enclosed IP-54 protection, free standing, floor mounted

dust and vermin proof, indoor type compartmentalized powder

coated of approved shade after antirust treatment (with min

10 MR seven tanks ) suitable with busbar interconnection with suitable - -

size of copper lead/solid Aluminium strips, control circuits &

bottom base channel of MS section not less than

100mmx50mmx5mm (thick), Fabrication shall be done in

transportable section ,entire panel shall have a common earth

busbar at rear with 2 nos earth stud cable alleys, cable gland

plates in two half as required as per single line diagram &

INCOMER:- - -

1 Nos.125 Amps. TPN MCCB (35 KA) with electronic releases.

1 Set phase indication lights (R, Y, B) - -

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-125 Amp. Ammeter (digital type) with inbuilt ASS - -

BUS BARS:- - -

400 Amps. TP&N aluminium bus bars (35 KA) - -

OUT GOINGS:- - -

2 Nos. 63A 4PN, MCCB - -

Supplying, installation, testing and commissioning of cubical type

MV Panel as per IEC:61439-I made out of 14 SWG sheet steel,

totally enclosed IP-54 protection, free standing, floor mounted

dust and vermin proof, indoor type compartmentalized powder

coated of approved shade after antirust treatment (with min

seven tanks ) suitable with busbar interconnection with suitable

11 MR size of copper lead/solid Aluminium strips, control circuits & - -

bottom base channel of MS section not less than

100mmx50mmx5mm (thick), Fabrication shall be done in

transportable section ,entire panel shall have a common earth

busbar at rear with 2 nos earth stud cable alleys, cable gland

plates in two half as required as per single line diagram &

specification enclosed with the following switchgears. (Main UPS

INCOMER:- - -

1 Nos.63Amps. FP MCCB (25 KA) with electronic releases. - -

1 Set phase indication lights (R, Y, B) - -

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-63 Amp. Ammeter (digital type) with inbuilt ASS - -

BUS BARS:- - -

200 Amps. TP&N aluminium bus bars (35 KA) - -

OUT GOINGS:- - -

6 Nos. 63A FP, MCB Set 84331.17 - -

SUB-HEAD (D) : L.T. CABLES - -

Supply, laying and testing of under noted sizes of Aluminium

conductor XLPE insulated PVC sheathed & sleeved armoured

and overall PVC sleeved 1.1 KV grade power distribution cables

12 MR conforming to relevant IS code and as per specification in ground - -

(including trenches) through pipe or on wall / racks cable trays

including dressing and clamping the cable with MS zinc

passivated clamps etc. as required.

SUB HEAD (H) : UPS SYSTEM - -

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. Supplying, installation, testing and commissioning of (N+1) 20

kVA/27KW online double conversion fully microprocessor based

,indoor type, compact UPS system of mentioned rating with

designed output PF .9 at 40 degree and IGBT based PWM

technology to achieve THD < 5% and input power factor of

greater than 0.95 at 50% loading, Efficiency >= 93% at 50 % load,

13 MR suitable for three phase AC input voltage 320 V to 480 V, 50 Hz - -

+3% / - 3 % and three phase AC output voltage 415 ± 1% volts &

frequency 50 ± 0.5 Hz with all components as mentioned in BOQ,

specifications and schedule, complete as required and as per

technical specification. Each unit shall be comprising of the

following: Total 2 no.s (In parallel)

125% rated Rectifier cum charger unit +100% rated Invertor,

Integrated in UPS module

100% rated Inbuilt static switch at the invertor output + 2 Nos. - -

100% rated Inbuilt static switches at the static bypass line.

100% rated Inbuilt Maintenance Bypass. - -

Web-enabled Monitoring and Management through SNMP

protocols for multi-OS environments.

Inbuilt feature required for input phase seq protection and

automatic change. UPS should work on mains and should not go

to battery mode in case of input phase sequence change

Supplying, unloading, installing testing and commissioning of

necessary VRLA batteries of suitable size having 15 minutes back

up time to 30KVA UPS for full load (75Ah Batteries X 20 No.) to be

provided. 1 No spare batteryof same AH to be provided and cost

to be added. Total VAH = 18000VAH - -

Note : Concerning vendor needs to furnish the battery sizing

calculations at the time of GA approval and battery size has to

be as per the approved GA drawing.

Supply, unloading, installation testing & commissioning of

matching cabinet/open racks to house above mentioned

batteries for 30 KVA UPS system along with suitable size - -

interconnecting cable (for UPS to Battery and battery to battery),

MCCB etc. complete as required & as per specifications.

Supply,installation testing and commissioning of UPS monitoring

software suitable for RJ-45 communication and capable of giving

pop up messages for all alarms received from UPS. All shall be

capable of the following:-

Giving notifications like e-mail, paging notification, broadcast

notification, battery replacement notification, run event-based - -

Event logging, data logging and action logging (with date, time,

description of fault and event).

Run the battery diagnostic test. - -

Automated unattended shutdown of computers. - -

Local notification through audible alarm. - -

Software should support :

latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris, Set 623660.01 1.00 6,23,660.01

Linux, Novell Netware, MAC

Total DSR & Total Non DSR 38,84,046.00 32,25,807.12

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor

units suitable for cooling and heating, having all hermetically sealed

inverter type Scroll Compressor(s), minimum two compressors for

above 14 HP modules, microprocessor based Controller, top

discharge type condensing unit(s), with R410A Refrigerant, vibration

1.0 1.1 isolators, with suitable foundation etc. complete as required.The unit Per HP 16415 91.00 14,93,765.00

shall deliver the rated capacity at AHRI Conditions and work even at

50°C ambient temperature without tripping.The unit shall be suitable

to work on 400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall

be filled with first charge of the refrigerant and ready for use as

required.The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following minimum

capacity 4-wayflow VRV/ VRF Cassette Type Indoor ceiling mounted

unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/ dynamically balanced blower, multi speed motor,

coil section with DX Copper coil, electronic expansion valve, outer

cabinet, drain pump, grill, necessary supports, vibration isolation,

cordless remote control etc., suitable for operation on single phase

230V±10%, 50 HzAC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at

air inl et conditions of 27 Degree CD Band 19 Degree CWB

4-Way Cassette type - -

Digitally signed

SINGH 19:24:33 IST

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

3.0 REFRIGERANT PIPING - -

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system,

DSR 2019 complete with fittings, with suitable adjustable ring type hanger

3.0 VRF/VRV supports, jointing/brazing including accessories, insulated with XPLE - -

Item No 5 Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given

below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

19.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick

4 CONDENSATE DRAIN UPVC PIPE - -

Supply, installation, testing and commissioning of uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and - -

accessories as per specifications, drawings.

4.3 MR Imported fittings Y-joints and headers etc. Nos 4281.4 20.00 85,628.16

Digitally signed

SINGH 19:24:33 IST

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper

in suitable conduits between indoor and outdoor unit.

MR Supply and fixing IP-55 based outdoor MCB box with 1 NOS 65 amp RCCB Nos 14650.0 14.00 2,05,100.00

Supply and fixing MS base frame for VRV outdoor stand as per approved size

Digitally signed

SINGH 19:24:33 IST

Sr. No. Item Description Unit Rate Qty Amount

SITC of 65" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution, , Contrast Ratio:

4000:1, Viewing angle (horizontal / vertical): 178 / 178 degree, Panel technology: IPS / Direct LED,

Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, Audio In, Audio Out, Control: RS232, Ethernet,

2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution, , Contrast Ratio:

4000:1, Viewing angle (horizontal / vertical): 178 / 178 degree, Panel technology: IPS / Direct LED,

Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, Audio In, Audio Out, Control: RS232, Ethernet,

2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports 37" to 98" displays, VESA

Compliant etc all complete

SITC of Compact Full Range 6.5" Ceiling Speaker 15 W RMS Power @ 8 Ohms, Frequency Response

4 (±3 dB) 95Hz - 15kHz, Frequency Range (-10 dB)68 Hz – 17 kHz,130 degrees conical Coverage , Nos 7,453.33 12 89,439.93

Maximum SPL 103 dB or better, UL etc complete required as per specifications.

5 SITC of 4x120 watt @ 4Ω Analog Power Amplifier, 70V/100V. Nos 1,44,891.13 1 1,44,891.13

SITC of 17U/18U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top of the Rack,

6 4 Caster wheels, 2 no Shelfs to mount the equipments which are not rack mounted, 8X2, 5/6 Amp. Nos 25,650.13 1 25,650.13

Power Distribution Unit, Cable Manager & Sufficient Rack hardwares.

7 SITC of cable cubby with HDMI , power and Lan port Nos 18,500.09 2 37,000.18

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome camera with

2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide Dynamic

Range),3D DNR (Digital Noise Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple

1 streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Nos 28,500.07 6 1,71,000.42

Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion

detection, Object left, Missing object,Intelligent Identification Face detection, Defocus, Scene

Change,PoE (IEEE802.3 af) Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to

Supply, Installation, Testing and Commissioning of 48Ch Embedded Network Video Recorder with

2 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Nos 2,15,000.53 1 2,15,000.53

Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as required.etc.all

Digitally signed

SINGH 19:24:33 IST

Sr. No. Item Description Unit Rate Qty Amount

Supply, Installation,Testing and commisioning of Executive Level IP Phone with Color display – 3.7

inches x 2.1 inches (9.5 cm x 5.4 cm)- Diagonal width: 4.3 inches (11 cm), Touch Screen display, 4-

position adjustable tilt display, Permanently-labeled feature buttons:, speaker, mute, headset,

contacts, home, history, message, phone, forwarding, volume (separate volume levels in handset,

5 speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message and history, 24 Nos 22,500.05 2 45,000.11

administrative buttons, Wideband speakerphone 0-5 Softkeys, Ergonomic hearing aid

compatible, handset supporting TTD acoustic coupler, Bluetooth and DECT headset support with

adapter, Message waiting indicator, Ethernet (10/100/1000) line interface, Secondary Ethernet

(10/100/1000)line interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP

protocol, H.323 protocol support, Standards-based codec support: G.711, G.726, G.729A/B, G722 ,

6 Supply Installation, Testing and Commissioning of Analog Speaker Phone with backlight. Nos 2,750.01 82 2,25,500.55

A. UTP Components for Data

6 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Blue, Nos. 525.33 90 47,279.83

10 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for

CAT6 cable termination at rack end. Data Active

C. 200 Pair MDF Box 0 -

1 200 Pair MDF Box with mounting Frame Nos. 9,199.68 1 9,199.68

D UTP Components for Wifi 0 -

Supply, Installation, Testing & Commissioning of 42 U Network Rack with 19''PDU 6 points 5 amp ,

1 Stationary shelf, Mounting Hardware(pac. Of 10) , Cable manager Horizontal 1U , Fan 230 Nos 62,113.65 2 1,24,227.30

vac 90 cfm top mounted

Supply, installation, testing & commissioning Cat-6A S/FTP Low Smoke Zero halogen (LSZH) Patch Nos. 238.63

Cord (Length – 1 Mtrs) Cat 6A S/FTP Patch Cable, TIA‐ 568C Category‐6A, ETL Channel test

report as per ISO/IEC 11801, ANSI/TIA-568.2-D-2018 , RoHS Compliant. Patch cords shall be of

Solid copper cable with ETL Listed. Plugs shall be designed with Snag less Moulded Boot

Supply, Installation, testing and commissioning of 1 U Horizontal Wire Manager 60mm depth (Front Nos. 425.00

Supply, Installation, testing and commissioning Patch Cord Lable for Rack side (Pk of 2500 Pc.) Nos. 7,130.02

5 Supply, Installation, testing and commissioning Velcro's Roll (15 Mtr. Per Roll) Nos. 219.90 7 1,539.28

ACTIVE COMPONENTS -

Digitally signed

SINGH 19:24:33 IST

Sr. No. Item Description Unit Rate Qty Amount

Supply, Installation, Testing & Commissioning of Core Switch with switching capacity of 480 Nos. 3,42,729.87

Gbps,frwarding performance of 357.12 Mpps with 20-port 10GBASE-T and 4-port 10GBASE-T/SFP+

Combo Port uplink module from day1, dual hot swappable internal power supply, 48 K MAC

Address Table with Physical & Virtual Stacking , ERPS Support, 802.1AX . IP Interface IPv4: 256 &

IPv6: 256 , VRRPv2/v3 support , the Swithc Should have iSCSI Awareness with Data Center

Bridging (DCB) should support DHCPv6 Guard,IPv6 RA Guard, IPv6 ND Inspection, ARP Spoofing

Prevention, DoS Attack Prevention, WAC/MAC, 802.3ah Ethernet Link OAM, Dying Gasp,

802.1agCFM, Y.1731 OAM

Wi Fi SYSTEM -

Supply, installation, testing & commissioning of Dual-band 802.11abgn/ac Wireless Access Point Each 28,666.74

,4X4: • 2.4 GHz - Up to 800 Mbps 5 GHz - Up to 1733 Mbps , dual ports ,802.3af PoE

support.Supports enhanced security – WPA2-Personal & WPA2-Enterprise, WPA3 . Supports two

1 10/100/1000 Ethernet ports. Support LACP or Static Link Aggregation Does not include power 3 86,000.22

adapter or PoE injector. Should Includes Warranty and Mounting Kit complet in all respect.

complet in all respect.with 3 years Support/warranty

Supply, installation, testing & commissioning ofWi-Fi Controller with 4 x 10/100/1000 Mbps ports Each 2,41,343.79

• 2 x USB 2.0 ports, • 2 x 10/100/1000 Mbps option ports for enabling VPN/Router/Firewall function

• 1 x 10/100/1000 Mbps console port, with 10APs license,PowerSupplyalong with 3 year support.

2 with licence for 12 users 1 2,41,343.79

Digitally signed

SINGH 19:24:33 IST

Sno. Item Specifications Rate Qty Amount

Providing & Supplying factory fabricated Medium Back Fixed base chair upholstered with Leatherite . The

seat and back are upholstered with leatherite and moulded Polyurethane foam. BACK SIZE: 450mm (W) x

520mm(H). SEAT SIZE: 480mm(W) x 490mm(D). Overall Height of chair is 700-750mm .The seat and back

have a premium quality chrome finish strips for high aesthetics & are Joined together. The armrest

assembly comprises of Chrome with leatherite covers which is connected and bolted to both seat and

back .The chair is fixed with a cantilever base made up of premium quality chrome. The base is provided

with nylon shoes. The work shall be carried out under the guidance and instructions from project

incharge.All the dimensions will be as per the Original Manufacturer's Specifications. The manufacturer

should have BIFMA membership,& Greenguard ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO

14001:2015 certifications.

Dimension (L)1200mm x (D) 600mm D) x (H) 1200mm

Supplying and placing of non sharing single seater workstation of 67mm thk sliding tile base partition of

1200mm height,providing and supplying non-sharing single unit workstation table in completely knock

down conditionswith an overall size 1200mm x 600mm x 1200mm that is to be assembled at site. the work

top shall have the size 1184mm x 592mm made up of 25mm thick pre- laminated particle board of grade

ii type iii of is 12823/latest . of is level with approved laminate and finish as per approved shade. the

profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of

impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge

banding machine at 200 degree celsius. the top trim, top bar, mid bar, vertical bar, raceway, skirting shall

be made up of aluminium extrusions (pre-treated) and duly powder coated with polyester powder

coating 40p-60p thick . the trims shall have the size 67mm x 19mm with 1.5mm thick covered with die cast

end caps on joints 2 ways, 3 ways & 4 ways (l-cover for corner, t-cover for middle section wherever

2 Cubical required). the aluminium raceway shall be situated below the worktop with an overall size 116mm(h) x 59,900 110.00 65,89,016.10

60mm(d) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the

electrical management and carrying the wire horizontally. the exposed vertical and horizontal faces of

the frames shall be snap fitted with trims. there shall be soft-board (with fabric) and marker board

provided at front of the user. laminated top tile and bottom tile shall be situated at both sides of the user

and below the work top respectively. the partition shall have concealed wire management capabilities

and should be engaged for responsive and safe operations of power, telecommunications and data

(lan) and has separate components for electrical, data and telephone cables having adequate

capability of both the vertical and horizontal wire movements. slots/cut-outs should be given on

raceways to fix all electrical and data points. single sided pvcwire manager should be enclosed at table

top.adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the

floor.Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.

Also a provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2

Digitally signed

SINGH 19:24:33 IST

Sno. Item Specifications Rate Qty Amount

Supplying and placing in position of 360 degree Revolving medium back chair of Dimension (W)585mm X

(D)660mm X (H)1060mm as per image . Ergonomically designed, it features a breathable mesh backrest

and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single Locking

Mechanism along with a Tilt Tension Control. The adjustable armrest provide deluxe comfort while the

strong chrome base . The 55mm castor wheels and a 360-degree swivel provide swift yet stable

Workstation movement.High-quality fabric upholstery with high abrasion-resistance and superior tear strength &

Chair colourfastness,Premium high-density virgin foam for comfortable seating, High stability chair with no-tip

over, clearing drop test of 102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height

Lift with Class IV gas lift,Adjustable headrest with Synchro Single Locking and Tilt tension control for

improved mobility.The product should be from the manufacture which have BIFMA Compliance

Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification. The product should be as

per above given specification under the guidance of project architect & Engineer in charge

Providing and placing of main table as per image/drawing. Modular tables of size 1500mm(L) x

600mm(D) x 750mm(H). Table top are made up of 25mm thick pre-laminated particle board and

understructure shall be made of 18mm thick prelaminated particle board gable ends and modesty

panels. The working edges shall be provided with machine pressed 2mm thick PVC edging using special

hot melt glue at hot temperature. Provision of one CPU trolley and PVC keyboard tray attached to the

Heairing table top. The table shall be provisioned with free standing Side Storage of size 900mm L x 450mm D x

4 Cubicals Main 750mm Ht., Storage Top are made out of 25mm thick pre laminated particle board and rest all storage to 50,800 2.00 1,01,600.25

Table be made out of 18 mm thick prelaminated particle board . Storage having a sliding shutter with D shape

handles and central locking arrangement. All exposed edges shall be provided with machine pressed 2

mm thick PVC lipping glued with hot melt EVA glue. The product should be from the manufacture which

have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification.

The product should be as per above given specification under the guidance of project architect &

Engineer in charge.

Supplying and placing in position of 360 degree Revolving High back chair of Dimension (W)585mm X

(D)660mm X (H)1305mm as per image . Ergonomically designed, it features a breathable mesh backrest

and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single Locking

Mechanism along with a Tilt Tension Control. The adjustable armrest and the adjustable headrest provide

deluxe comfort while the strong chrome base . The 55mm castor wheels and a 360-degree swivel provide

Heairing swift yet stable movement.High-quality fabric upholstery with high abrasion-resistance and superior tear

5 Cubicals Main strength & colourfastness,Premium high- density virgin foam for comfortable seating, High stability chair 17,300 2.00 34,600.08

Chairs with no-tip over, clearing drop test of 102kgs,Adjustable Lumbar Support for superior back

support,Pneumatic Height Lift with Class IV gas lift,Adjustable headrest with Synchro Single Locking and Tilt

tension control for improved mobility.The product should be from the manufacture which have BIFMA

Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in

Digitally signed

SINGH 19:24:33 IST

Sno. Item Specifications Rate Qty Amount

6 MEDIUM HEIGHT STORAGE

SIZE :- 1200X450X1200HT(1050+150HT) for workstation hall

MEDIUM TOP :- 25mm thick PLPB board with 2mm thick PVC edge banding finish with as per approved laminate

STORAGE SHELF, SHUTTER & STRUCTURE :- 18mm thick PLPB board with 2mm thick PVC edge banding finish with as

per approved laminate color.

FULL HEIGHT STORAGE SIZE :- 890X450X2400HT TOP :- 18mm thick PLPB board with 2mm thick PVC edge

FULL HEIGHT banding finish with as per approved laminate color. SHELF, SHUTTER & STRUCTURE :- 18mm thick PLPB

STORAGE SIZE :- board with 2mm thick PVC edge banding finish with as per approved laminate color.

8 SOFA 3 SEATER SOFA WITH UPHOLSTRY FABRIC AS APPROVED 70,000.17 3.00 2,10,000.51

9 SOFA 2 SEATER SOFA WITH UPHOLSTRY FABRIC AS APPROVED 56,000.14 2.00 1,12,000.27

10 SOFA SINGLE SEATER SOFA WITH UPHOLSTRY FABRIC AS APPROVED 31,500.08 2.00 63,000.15

11 TABLE CENTRE TABLE WITH GLASS TOP 16,800.04 2.00 33,600.08

12 TABLE SIDE TABLE WITH WOODEN STRUCTURE 13,635.03 2.00 27,270.07

SUB TOTAL OF FINISHES 1,04,79,695.74

Digitally signed

SINGH 19:24:33 IST

SCHEDULE OF QUANTITIES: Fire Fighting

S No DSR 2022/ DESCRIPTION UNIT RATE

Providing and fixing ISI Marked of approved

make Fire Extinguishers complete with all

1 MR accessories as per manufacturer's specifications.

a) CO2 gas nozzle type - 4.5 Litre capacity 9.00

b) Mechanical Foam gas cartridge type. 9 Kg 9.00

capacity (IS:15683).

c) ABC dry powder stored pressure type 6 kg 8.00

capacity (IS:15683).

Digitally signed

SINGH 19:24:33 IST