Widening and Strengthening of Tarkulha devi Aadi Shakti Mandir Road At District- Gorakhpur With 5 Year Maintenance LOT 1 of 1

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per MORT&H Spe. 201 Sr. no 2.03 ii (A) (Including Labour Cess but GST will paid extra as applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m As per MoRT&H Specification & Clause . No.301, 3.06 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.As per MoRT&H Specification & Clause . No.305, 3.17 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2. As per MoRT&H Specification & Clause . No.305, 3.16 (Cartage Earth) complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.as per MORT&H Specification & Clause No.401, 4.01 B complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.as per MORT&H Specification & Clause No. 406, 4.14B complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORTH Specification & clause No. 502, 5.01 A(i) complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, As per MORTH Specification & clause No. 519, 5.13 B (ii) complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.As per MORTH Specification & clause No. 503, 5.02 (i) complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing and laying bituminous concrete (Grade-2) with higher capacity batch type hot mix plant 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. as per MORTH specification & clause No. 507, 5.05(B) complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)