REPAIR MAINT TO DAMAGED ROOF CHAJJA FACIA FLOORING PLASTERING PAINTING KITCHEN HARDWARE CUPBOARD PLINTH PROTECTION AND CERTAIN B R WORKS

Amount

Material and labour for Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete as described below and all as specified and as directed :-

(a) Dismantling existing cement concrete/ roof tiles on roof including removing debris to outside MOD land as directed.

(b) Bring upto the slope by providing PCC 1:2:4 type B1 (using 20mm graded stone aggregates) of average thickness of concrete 50 mm.

(c) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing liquid water proofing compound as per manufacturer’s instructions.

(d) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.

(e) All cracks at corner joints, channels and parapets should be properly treated for filling cracks upto 3mm using crack seal material of M/s Asian paints or equivalent in M/s Berger Paints or M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas must be repaired with polymer modified cement mortar.

(f) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Berger paints or M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).

(g) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Berger paints or M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.

(h) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Berger paints or M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.

(j) In case of severe dampness an additional coat of damp proof materials to be applied by the contractor without any extra cost to Govt.

Note for item No 01 to 10:- (i) The work shall be carried out through authorized and qualified applicator of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Berger paints or M/s Dr Fixit or M/s Pidilite or M/s Sika chemical.

(ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified and an amount @ 5% of total value of WPT shall be retained from the contractor on amount of guarentee money against WPT for 10 years.

(iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after completion of treatment of roof.

(iv) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level.

(v) The unit rate quoted for item is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.

(vi) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted.

M&L for reinforced cement concrete (Nominal Mix) 1:1½:3 Type A1 (using 20 mm graded crushed stone aggregate) as in Slab/beam/columns/ chajja/ facia, lintel, supported on walls, beams and column in floors, balconies etc complete including demolition of old reinforced cement concrete and finishing the surface with one coat of white wash complete all as specified and directed.

Use and waste of form work fair finished surfaces to sides and soffits of floor or roof beams, lintels, Chajjas, cantilevers etc complete all as specified and directed.

M&L for steel reinforcement TMT bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips incl removal of old reinforcement complete all as specified and directed.

M&L for steel reinforcement TMT bars 6mm dia to 8mm dia cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips incl removal of old reinforcement all as specified and directed.

M&L for Repair to ends of chajjas/ parapets by removing old concrete, loose material & cleaning of the reinforcement and finishing the surface with rich cement mortar 1:3 , finished fair & even and making good (not exc 3 Sqm) with existing finishes complete all as specified and as directed. Note: Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding.

Taking down cement plaster on brick or stone walls, or concrete walls including raking out joints, hacking for key, scrubbing down with water, etc.,including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces rendering is to be finished even & smooth without using extra cement for internal walls complete all as specified and directed.

S&F in repair aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for servicing/ easying of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges, handles ,stay etc & making good disturbed portion painting etc complete all as specified as directed.

Taking down cement plaster on brick or stone walls, or concrete walls including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for 15 mm thick plastering in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately.

S&F in repair PVC body cabinet box mirror of suitable size of PTMT alloy of approved pattern and design including taking down existing one complete all as directed.

S&F in repair powder coated dropery rod fancy type (colour as approved) of 20mm bore including brackets, stops, rollers, etc. and fixed to wall with steel screws, necessary fittings complete all as specified and as directed .

Taking down cement plaster on brick or stone walls / ceiling , or concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for 5mm thick cement plaster in CM (1:3) on brick work or concrete ceiling surfaces incuding finishing even & smooth without using extra cement complete all as specified and directed

Supply only liquid water proofing compound (ISI marked) of approved make complete all as specified and as directed.

M&L preparation of newly plastered surfaces wall / ceiling and applying three coats of white washing on ceiling/ walls surfaces complete all as specified and directed.

M&L preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces of any description, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying wall care putty of 3 mm thickness over plastered surface to prepare the surface even and smooth and applying two finishing coat of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises and providing Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises and providing Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.06 Sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring surface finished smooth without using extra cement, including demolition of existing cement concrete & including disposal of demolished of material out side MD land complete all as specified and directed.

S&F in repair of 12 mm thick, 7 ply, plywood ,grade BWR ,type BB fixed to wooden frame work in wall with nails including removal of old boards of any description complete all as specified and directed

S&F in Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved complete all as specified and as directed.

M&L for 18mm thick WPC board for kitchen cabinets door, shelves, sides and back, one side white in colour and other side dark colour, including dismantling of existing one complete all as specified and directed.

S&F in repair Strainless Steel kitchen cup and saucer Basket of height 100mm including telescopic channel fixed as drawers including dismantling of existing old one complete all as specified and directed. (In one set - 3 wire basket)

S&F in repair Strainless Steel kitchen cup and saucer Basket of height 150mm including telescopic channel fixed as drawers including dismantling of existing old one complete all as specified and directed. (In one set - 3 wire basket)

S&F in repair Strainless Steel kitchen cup and saucer Basket of height 200mm including telescopic channel fixed as drawers including dismantling of existing old one complete all as specified and directed. (In one set - 3 wire basket)

M&L in repairs Stainless steel self closing hinges, 50mm size, 8 crank for cupboard shutter , complete all as specified and directed.

M&L in repairs Stainless steel handle 100mm size, D type, complete all as specified and directed.

S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including taking down old one complete all as specified and directed.

S&F in repair aluminium anodised hasp and staples safety type with mild steel hinge pin incl bolt to hinge plate fixed with screws of 100mm length complete all as specified and as directed.

S&F Continuous (piano) hinges, stainless steel bright finish or electro galvanised of 40mm width of flaps (when open) complete including taking down old unserviceable all as specified and as directed.

S&F PVC beading for cupboard work, colour and pattern as approved including taking down existing one complete all as specified and as directed.

S&F in repair Plate rack of suitable size made of stainless steel complete all as specified and directed

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed cement Mortar (1:6) 15 mm thick colour of granite as approved incl removal of old all as specified and directed. NOTE : (i) Dismantling of old unserviceable stone slab and tiles laid bedded and pointed in any mortar of any discription of thickness in floor. (ii) The unit rate is deemed to be included for rounding to edges of stone slabs.

Petty repairs to refixing the existing Wash hand basin and Sinks made of stainless steel 1mm thick kitchen flat back including fixing cantilever CI/Angle iron brackets embedded in concrete block including connecting waste coupling 32mm bore, including bedding, waste fitting, waste pipe in cement mortar on dwarf wall and connecting union to pipe, filling gap in white cement and all neccessary fittings fixed in repair (including taking and refixing the same position) complete all as directed.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surface of wall, chajja,ceiling, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paint complete all as specified and as directed.

M&L for Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying two coat of exterior emulsion weather proof paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises and Material and labour for glazed ceramic coloured tiles 450 x 300 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as skirting/ dado including 10mm thick 1:4 backing coat complete all as specified and directed.

M&L for repair Pre-cast PCC 1:3:6 type C1 (20 mm graded crushed stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 including demolition of old brick work / stone masonry/PCC block built in cement mortar of any description complete all as specified and directed.

M&L for rendering 15 mm thick CM 1:4 on new brick/ stone surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, grill, gratings etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing Fe-290, grade E 165 complete all as specified and directed.

M&L for preparation of new steel surface and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed .

S&F in repair powder coated aluminium frame with all fixing arrangements for doors, sliding windows and ventilators/ partitions etc with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron including taking down old one of any description complete all as specified and directed.

S&F in repair Powder coated anodised aluminium windows, and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium fittings suitable size lock with roller completed all as specified and directed.

Supply and Fix in repair for 10mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work including taking down old one of any description complete all as specified and directed.

S&F in sheet glass ordinary quality 5.5mm thick and glazing with oil putty or aluminium beading in square exc 0.50 Sqm in each pane fixed with aluminium window and ventilator of any description complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each pane complete all as specified and directed.

S&F Frosted glass 4.0mm thick, pin head type n exc 0.5 sq.m in each pane and fixed. complete all as specified and directed.

S&F in repair manually operated polyester fabric vertical venetian blinds of approved colour and pattern of any size and suitable thickness including high strength aluminium alloy channel fixing with two nos clamp including all connected fittings and fixtures for windows,ventilators etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base of floor finished even and rough to receive top layer and all as specified and directed including demolition of old concrete (un reinforced) of any description and in any position not otherwise specifically provided.

M&L in repair Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over 50mm thick sand cushioning including removal of old unserviceable flooring and necessary demolition etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down/ dismantling of old one complete all as specified and directed.

Petty repair to internal/external water inlet GI/CPVC pipe line of any size coming from over head tank to the quarter including socket, elbow, nipple ,with repair to water blockage , pipe line leakage, cleaning internally, removing of air/dust blockage including concealed water tubing etc n exc 3m length of any height using scaffolding and making the water supply functional complete all as specified and directed.

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old unsericeable steel tubing and connection complete all as specified and directed.

Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old unserviceable steel tubing and connection complete all as specified and directed.

S&F Vitreous china squatting pan 'Orissa' Pattern size 580mmx440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime/cement concrete bedding fixed in repairs all as specified and as directed.

S&F Wash basin vitreous china (flat back and angle back Type) size 580x400mm excluding tap waste, chain and plug and porceline stopper but brackets including cutting for and pinning in ends of brackets or erecting stand with waste pipe, fixed including taking down existing one complete as directed.

S&F in repair 40mm bore unplasticised PVC (UPVC) pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 40 mm waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed one complete all as specified and directed.

S&F in 150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank of 1000 Ltrs capacity cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

S&F in repair of Stop Valve standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) and directed.

S&F in repair Bib taps fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore all as specified and as directed.

Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe all as specified and directed.

S&F in repair of Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) and directed.

S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed.

S&F in repairs overhead Shower rose ø125mm (Brass Chrome Plated) complete all as specified and as directed.

S&F in angular stop cock, valves high pressure screwed both ends iron pipe or for union 15mm dia, including taking down existing one complete as directed.

S&F in repair brass chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .

S&F 32 mm dia Waste Coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down existing one complete all as specified and directed.

Petty repair to wall mixer,basin mixer,sink mixer etc including replacement of spindle brass, Jumper brass, rubber washer, head included taking down and refixing etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm including taking down existing one complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (exluding fixing bolts,flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed in repair, all as specified and as directed.

S&F in repair PVC waste pipe 32 to 40 mm dia and length n exc 2m for WHB/Sink/Urinal up to floor trap and fixed complete all as specified

S&F in repair vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, Urinal spreader, CP push cock, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair PVC flush ceramic colour cistern , low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements, all as specified and as directed.

Supply and fixing in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device and including taking down existing one complete as directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe complete as directed.

S&F in repair of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and directed.

S&F in repair of chromium plated tubular towel rail 20 mm dia of stainless steel D type 60 cm long between flanges complete all as specified and as directed.

Taking down & re fixing high or low level flushing cistren 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, syphon set, float valve,stopping of leakage etc complete all as specified and as directed

S&F in repair of pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) and directed.

S&F in repair of Swivel Shower with arm of PTMT any colour and 195mm long bend of 45 degree with flange for fixed with 15mm pipe (Minimum weight 15mm-90gms) and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, all as specified and taking down steel/plastic/cpvc water tubing and connections 15 mm/20mm/25mm dia .

Supplying and fixing in repairs of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified and directed.

Supplying and fixing in repairs 25mm outer dia CPVC brass elbow all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking down steel/plastic/cpvc water tubing and connections including cleaning for refixing 15 mm/20mm dia .

Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing in repair 20mm outer dia CPVC brass elbow and all as specified.

M&L for Petty repairs to leaking water in bib taps, pillar cock, stop cock, angle valve, concealed stop valve, bottle trap of any description by changing the PVC washers/ Sheet washers,spindle brass,jumper brass or any other minor accessories items included etc (incl taking down and refixing) complete all as specified and directed.

S&F PVC (SWR) pipes single socket in any length with rubber ring joints of 75 mm bore fixed to wall including taking down existing one complete all as specified and as directed.

S&F PVC bends 75mm bore including taking down existing one complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed to wall/floor including taking down existing one complete all as specified and as directed.

S&F PVC bends 110mm bore including taking down existing one complete all as specified and as directed.

S&F PVC (SWR) 110mm junction vent cowl all as specifed including taking down existing one complete all as specified and as directed.

S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed.

S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal to outside MD land all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 10 mm thick in Cement Mortar (1:4) complete including dismantling of existing tile and disposal to outside MD land all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed.

M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint over 10 cm width or girth, not other wise described complete all as specified and as directed.

M&L for Preparation of old decorated surfaces of walls by using pressure washer, remove all dirt & dust ,applying one coat of wall care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufauture instruction of required shade complete all as specified and directed.

M&L for Preparation of old concrete/Asbestos/GI Sheet/Cement/Plaster surfaces over brooming down or steel wire brushing down and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying two coat of cement based paint complete all as specified and as directed.

Taking down and re-fixing the same existing aluminium door/window/partitions (each shutter area n. exc 5 sqm) after carrying out ceratin repairs as required, removing the existing beading and fixing new (i.e. included change Handles, hinges, star lock, rubber beadings, bottom bearing, clips etc) rubber beading of suitable size with adhesive, overhauling of floor springs including repairing/cleaning/greasing etc and make the same fully functional all as specified and directed.

Providing and injecting chemical for post constructional Anti TermiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed.

Taking down chowkhat or frame(wooden/steel/aluminium) not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frame) all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F in Factory made Solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S&F in Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F in Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Butt hinges 100 mm long medium weight cold rolled stainless steel complete all as specified and as directed.

Supply and fixing 150 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.

Supply and fixing aluminium handles cast type anodized 150 mm long complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.

Petty repair to wooden door,skelton door, PVC door, wooden window, wooden ventilator, cupboard door, wardrobe door with shutter (size upto 2 Sqm) including roller, windows, etc with minor repair and easying and adjustment/aligment to openable with assesories if requred any ( like roller of cupboard door, butt hinge, handle, tower bolt, beading, bow handle, etc complete)included taking down and refixing complete all as directed.

M&L for Preparation of old painted wooden surface of any description and applying one coat of synthetic enamel paint not otherwise described over 10 cm width or girth, complete all as specified and directed.

M&L for 75mm thick Plain cement concrete (1:3:6) type C1 (20 mm graded crushed stone aggregate) as in plinth protection courses, top surface of concrete finished even and smooth without using extra cement, including expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen and 3 parts of sand including demolition of existing cement concrete including disposal of demolished material upto MD land complete all as specified and directed.

Material and labour for dismantling the existing unserviceable gully trap including chamber and material and labour for provision of salt glazed stoneware gully tarp, square or round mouth type "P" of size 180mmX150mm, including setting and jointing in cement mortar 1:1 plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4 rendering in cement mortar 1:4 all around finished even and fair using extra cement RCC cover slab in RCC type B1, 1:2:4 with 6mm dia reinforcement etc, complete all as specified and as directed

Material and Labour in repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horinzontal pipe embeded in floor in bathroom or kitchen making good to the damaged portion of flooring, laying and matching of tiles in the existing flooring, complete all as specified and directed.

M&L in repair of leakage/seepage from the wall/ door bend /door tee/ 'Y' junction/ 'T' Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damaged soil waste pipes or fittings of any shape, specification and size, making good to the damaged portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and finished the surfaces matching to existing wall complete to avoid the leakage/ seepage at the site of work complete all as specified and directed.

Note for item No 143 & 144 :- (a) Find out main cause of leakage and take necessary steps to resolve / rectify. (b) Replace existing tiles in case leakage through NT/FT. (c) The rate also include provision of new NT/FT. (d) The unit rate is also deemed to be included for reqd bonding chemicals to arrest the leakage/seepage as directed by the manufacturer's specification. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit

Note :- An amount of Rs 67,730.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

T C KARUNANITHI (BID ID -3249881)

SHREE BANASHANKARI ASSOCIATES (BID ID -3250618)

A.GOVINDARAJ (BID ID -3249825)

Forge Engineering & Electricals (BID ID -3251475)

devan enterprises (BID ID -3251538)

KRD ASSOCIATE (BID ID -3250804)

OM ENTERPRISES (BID ID -3251189)

M/S SRI BALAJI ENTERPRISES (BID ID -3251413)