ADDN/ALTN TO KITCHENER HOUSE INSIDE FORT WILLIAM, PROVN OF 07 X GEYSER FOR ENGR DET, EC, PROVN OF COLLAPSIBLE GATE IN ENTRANCE OF BLDG NO P-158, PROVN OF ALUMINIUM WINDOW VENTILATORS AT MAIN OFFICE BLDG NO. T-569, PROVN OF WATER TANK STAGING, PROVN

Amount

SCHEDULE 'A PART-I (B/R PORTION)

Surface excavation n.exc 30 cm deep and averageing 15 cm deep and getting out soft and loose soil.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide & not exc 1.50 mtr deep and getting out in soft/ loose soil complete all as specified and directed.

M&L excavating in post holes (or similar holes) each in soft/ loose soil n exc 0.5 cum , getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm , watering , and removing surplas soil to a distance n. exc 50 cm and making good surface complete all as specified and directed.

Returining filling in including spreeding levelling, watering and well ramming in layers n.exc. 25 cm complete all as specified and directed.

Removing excavated soil n.exe 50 mtr distance and depositing at level not exc 1.5 mtr above the starting point complete all as specified and directed.

Earth filling under floor incl spreading, levelling & well ramming includuing watering as required n exc . 25 cm thick complete all as specified and directed. (Note :- Earth obtained from item No -1 shall be reused)

M&L for hardcore of broken bricks gauge exc 63mm but n exc 100 mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface under PCC Platform complete all as specified and directed.

M&L for 150 mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for P.C.C (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for P.C.C (1:2:4) type B2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for P.C.C (1:3:6) type C1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed

Material and labour for Plain Cement concrete, 100 mm thick, type B-2, P.C.C (1:2:4) (40mm graded aggregate) as in sub base of floor complete all as specified and as directed.

M&L 40 mm thick P.C.C 1:2:4 type B1 using 20mm graded aggregate as in floor finished even and smooth with using extra cement complete all as specified and as directed .

M&L 100 mm thick P.C.C 1:4:8 type B2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed .

M&L 75 mm thick P.C.C 1:2:4 type B2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed .

M&L brick work with sub class ‘B’ brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class ‘B’ brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:4 complete all as specified and as directed.

M&L brick work with sub class ‘B’ fly-ash brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed.

M&L for use and waste formwork to chullah hoods, chajjas, troughs , shelf and similar work etc including edges , rough finished surface of concrete complete all as specified and directed

M&L for use and waste of formwork to side and soffits of floor or roof beams, beam haunching, girders, bressum-mers, lintels, cantilevers, shelves including suports, overhanges etc also splayes between floors and beams etc, rough finished flat surface of concrete complete all as specified and directed .

M&L for Use and waste of formwork to side of pillers , posts, strut, pier, columns and stanchions, rough finished flat surface of concrete complete all as specified and as directed

M&L for Uses & wastes of Formwork to rough finished flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

M&L for Use and waaste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed.

M&L RCC 1:1½:3 (Type A1) using 20 mm graded aggregate as in chajja etc . complete all as specified and as directed .

M&L RCC 1:1½:3 (Type A1) using 20 mm graded aggregate in columns, piilars, piers, posts and struts complete all as specified and as directed.

M&L RCC 1:1½:3 (Type A1) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and as directed.

M & L for Reinforced cement concrete (Nominal mix) Type A1 1:1½:3 using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and as directed

M&L RCC 1:1½:3 (Type A1) using 20 mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

S&F Mild steel TMT bars 5 mm dia and over and including 10mm in stirrups , cut to length and bent to shape as reqd, including cranking , bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.90 mm dia complete all as specified and directed .

Supply and fixing mild steel TMT bar 6mm to 8mm dia, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F Mild steel TMT bars 10 mm dia and over cut to length and bent to shape as reqd, including cranking , bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.90 mm dia complete all as speified and directed .

M&L 40 mm thick DPC (1:2:4) type B-0 using 12.5 mm graded aggregate, mixed with WPC @ 3% by weight of cement, to horizantal surfagce including necessary form work all as specified and as directed. (Note -W.P.C. shall be measured and paid separetly)

Supply only water proofing compound all as specified and directed.

S & F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290(Gde-165) all as specified and directed.

M & L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry etc complete all as speified and directed .

M & L for Ridge or hip tiles to suit Mangalore Pattern of roofing tiles, bedded and jointed in cement mortar 1:3 including raking cutting and waste to hips, valleys, etc complete all as speified and directed .

S& F Toughened glass 10-12mm thick designed /moulded and glazing complete all as specified and directed by Engr-in-charge.

S& F 1st class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including additional rebate for second shutter complete all as specified and directed.

M&L for 2nd class hard wood timber scantling clean wrought, timber framed & fixed complete all as specified and as directed

M&L 2nd class hard wood fillets, bullnosed, splayed, chamfered or rounded on one edge or face of sectional area exc 3 sq cm and n exc 6 sq. cm including preparation of new or previously untreated surfaces and applying finishing coat with synthetic varnish following under coating over filler coat of thin varnish or lacquer or shellac varnish complete all as specified and as directed

M&L 2nd class hard wood fillets, bullnosed, splayed, chamfered or rounded on one edge or face of sectional area exc 6 sq cm and n exc 13 sq. cm including preparation of new or previously untreated surfaces and applying finishing coat with synthetic varnish following under coating over filler coat of thin varnish or lacquer or shellac varnish complete all as specified and directed.

M&L cutting holes in brick walls exc. Half brick but n exc. one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/ oiling puttird surfaces to match existing work. (Note: New length of frame reputtied shall be measured)

M&L 2nd class hard wood in boarding 20 mm thick planed both side with butt joints & fixed with nails in any situation complete all as directed and completed

M&L 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber / aluminium frame work/partition complete all as specified and directed.

M&L 0.9 mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction over ply wood/block board complete all as specified and directed.

S&F 6mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails complete all as specified and directed.

S&F 25 micron sun control film on glass reflective type, best quality, sticked to glass panes as per instructions of manufacturers complete all as specified and directed. (Make : Garware or equivalent make as approved by GE)

M&L 1st class hard wood, 35 mm thick, plain framed panel shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density fitted to chowkats or frames complete all as specified and directed.

M&L 1st class hard wood glazed and skeleton ventilator / window shutters 35 mm thick open rebated and prepared to receive glass, etc of framing plain, chamfered or rounded but divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers.;size of member of shutter as specified in SSR part -I , section -8 , clause 8.20 (b) complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F 75mm Stainless steel butt hinges medium weight complete all as specified and directed.

S&F 100mm Stainless steel butt hinges medium weight as in repair complete all as specified and directed.

S&F 150mm extruded brass handles, cast type, polished bright complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S&F 300 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts complete all as specified and directed.

S&F Mortice lock vertical type (chrome) 100mm, 6 levers as in repair complete all as specified and as directed. (Make : Godrej, Model No- 8194 or equivalent make specified in tender)

S&F Cylindrical lock (polished brass) ,7 lever fixed as in repair complete all as specified and as directed. (Make : Godrej, Model No - 5328 or equivalent make specified in tender)

S&F 50mm brass, 4 levers locks, cup board, grade I complete all as specified and as directed.

M&L gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified and as directed.

S&F light grade galvanized tubes, 50 mm bore, with all fitting fixed as in ceiling for hanging false ceiling including cutting holes or through brick walls of 150mm depth built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required, superficial area exc 150sq cm but n exc 400 sq cm complete all as specified and as directed.

M& L for Vitrified Ceramic tiles, dark shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes all as directed .

S&F glazed ceramic color tiles, 300 x 450 x 7mm thick (as per design approved by Engineer-in-Charge) on dado & skirting, set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to receive tile complete all as specified and as directed.

M&L 20-25 mm thick machine cut kota stone slab flooring, over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 15 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, cocking platforms and like including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 15 mm thick screed bed or bedding layers in cement mortar 1:4 complete all as specified and directed .

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed. (NOTE: Top layer shall be mixed with water proofing compound @ 3% of the weight of cement. WPC shall be measured and paid seperately)

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:6 finished fair and even complete all as specified and as directed.

M&L rendering 5 mm thick cement plaster on fair faces of concrete surface in cement mortar (1:3) finished fair and even as in ceiling complete all as specified and directed.

M&L 75 mm thick P.C.C. (1:3:6) type ‘C2’ using 40 mm graded stone aggregate as in plinth protection, pathway etc and finished the surface even & smooth without using extra cement all as specified and directed.

M&L for 300mmX300mmX10mm thick high traffic paver tiles (coloured) joint free, conforming to IS-4457:2007, as in floor of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. (Make : Johnson, Model: ENDURA or equivalent model in other makes specified in tender)

S&F glazed ceramic colour picture tiles (size as per site requirement to make a wall picture) on wall, set and jointed in neat cement slurry (each small size picture tiles combined or placed in such mannet to make a wall picture) and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in cement mortar 1:3 to receive tiles complete all as specified and directed.

M & L for preparation of newly or prreviously untreated plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting on wall complete all as specified and directed.

M&L preparation of new steel surface of any description over 10cm width or girth applying two coats of synthetic enameled paint over one coat of red oxide complete all as specified and directed.

S&F 38 mm wide glass dividing strips 3 mm thick complete all as specified and directed.

M&L preparation of new wood or wood base surface of any description over 10cm width or girth applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified and directed.

M&L for applying two coat of varnishing finishing coat with synthetic varnishing and one coat filler coat on new treated wooden surfaces of any description over 10 cm width or girth including cleaning and preparation all as specified and directed by Engr-in-Charge.

M&L Cutting holes into or through brick walls built in cement mortar in 1:3 or cement concrete 1:2:4 type B1 as required in superficial area exceeding 400 Sqcm but not exceeding 0.10 Sqm all as specified and directed

Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in filling/jamming of angle iron in wall incl necessary formwork complete all as specified and as directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L for two coats of cement base paint including preparation of new plastered surface of wall complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame of approved colour for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges types B-21 100 mm long (2No) suitable handle (1No) complete all as specified. (NOTE: Glass shall be measured and paid separately)

Supply and fixing 4.8 mm thick sheet glass, ordinary quality and glazing with rubber beading or aluminium clip in square n exc 0.5 sq m in each pane complete all as specified and as directed.

M&L Preparing new plastered Surfaces of wall and applying three coats of white wash complete all as specified and as directed.

S&F 1000 Ltrs rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of multi-layer, ISI marked, hoisted and fixed in position including provision of cover, 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe all as specified in SSR Part-l, complete all as directed.

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

M&L for pre-polished Chequered cement concrete tiles (coloured) of size 250 mm X 250 mm X 25mm thick , set, jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

S&F convex mirror 80 cm dia, pole mounted on mild steel heavy grade pipe 50 mm dia stand embedded in pedestal upto required depth, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F aluminium anodized barrel tower bolts of extruded section 150mm in length complete all as specified and directed.

S&F 40 mm Butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium handle, cast type 125mm in size complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc 22.5 cm and n. exc 30 cm long complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as direceted by Engr-in-Charge.

SCHEDULE 'A PART-II (E/M PORTION)

Supply and fix in repairs IP65 rated Inverted Pyramid Tripod type LED Bollard 10 Watt with soft 360 deg light distribution complete all as specified and directed. (Make : Crompton Greaves, Cat No- LBLSN-10-CDL or equivalent model in other makes specified in tender) (NOTE: Wire for electric connection shall be measured and paid separately)

S&F in repairs 50W LED Flood light fitting, warm white, in die cast aluminium housing with lens, IP 66 protection with front toughened glass, brackets etc complete all as specified and directed. (Make - HAVELLS, Model: JETA QUANTO PLUS / HALONIX, Cat No: HLFLD-ML 21-50-CWL / BAJAJ, Model : AMAZE LED / CROMPTON, Cat No: LFL-50-CDL/60-M / SURYA, Cat No: SLE FL 50W IP65 RFLOOD / JAQUAR, Cat No: LFLD02S050XC/MAGIK, Model: ZENITH PLUS) (NOTE: Wire for electric connection shall be measured and paid separately)

-ditto- but for green colour (Make - MAGIK, Model: ZENITH PLUS or equivalent model as approved by GE)

S&F in repairs 100W LED Flood light fitting, in pressure die cast aluminium housing, with lens and front toughened glass, brackets etc IP 66 protection incl taking down existing fitting complete all as specified and directed. (Make - HALONIX, Cat No: HLFLD-ML-21-100CWL / BAJAJ, Model : AMAZE LED / SURYA, Cat No: SLE FL 100W IP66 LUMOS / HAVELLS, Model : JETA IRIS / PANASONIC, Model: FLANO / MAGIK, Cat No: FWZP100W) (NOTE: Wire for electric connection shall be measured and paid separately)

Supply and fixing LED flexi strip of 50 m length, IP 65, 5watt/metre, 6500K including seperate driver and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE : MAGIK, Cat No : RUSR065C or equivalent model in other makes specified in tender) NOTE: Driver shall be measured and paid seperately

Supply only LED driver suitable for LED strip of capacity 5watt/metre, 6500K complete all as specified and directed. (MAKE : MAGIK, Cat No : RUSR065C or equivalent model in other makes specified in tender)

Supply and fix recess mounted round shaped downlighter 12 watt LEDs (having efficacy of 100 lumen/watt) suitable for 240 V, 50Hz in extruded alumnium housing with and including constant current driver with in built protection against lightning, over voltage & short circuit including connecting up with three core flexible copper conductor cable of size 1.5 sqmm (nominal area) complete all as specified and directed. (Make - HALONIX, Cat No: HLDLR-R06-12-CW / BAJAJ, Model : RDIANCE LED / SURYA, Cat No: SLE DLR 12W SS Stellar RD / HAVELLS, Model : INTEGRA NEO / PANASONIC, Model: BULWARK / MAGIK, Cat No: DCSE012C)

S&F PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs as in repair complete all as specified and as directed by the Engr-in-Charge.

Supply & fixing of horizontal submersible pump set, 2 HP capacity electric driven AC supply 230 single phase including submersible cable & starter complete all as specified and directed. (Make: KIRLOSKAR, Model: KOS-216M or equivalent model in CROMPTON / KSB)

Supply and laying PVC insulated and PVC sheathed flat cable with electrolytic grade Annealed copper conductor of size 3 core 4 sqmm for submersible pump and motor complete all as specified and directed.

Supply and laying steel water tube 25 mm bore (dia) galvanzed medium grade with all fitting fixed on walls, ceiling or laid on floor or any other situation complete all as specifed and directed.

Supply and laying steel water tube 20 mm bore (dia) galvanzed medium grade with all fitting fixed on walls, ceiling or laid on floor or any other situation complete all as specifed and directed.

Supply and laying steel water tube 40 mm bore (dia) galvanzed medium grade with all fitting fixed on walls, ceiling or laid on floor or any other situation complete all as specifed and directed.

Supply and fixing 40 mm bore gun metal gate valve iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing 25 mm bore gun metal gate valve iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing 20 mm bore gun metal gate valve iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing bell type brass fountain complete all as specified.

S&F 3X3Watt diecast aluminium LED light fitting IP 68 suitable to work 700mA constant current and 6-12V range including 3 Nos colour LED 3 wheels incl all accessories such as constant current driver, lens, glass, gland, clamp etc complete all as specified and directed. (Make : Mass Enterprise, Cat No : LM-926 or equivalent model in other makes specified in tender/as approved by GE)

M&L for installation, commissioning & testing of CPRI approved "outdoor cubical canopy type" LT feeder pillar box fabricated with 3.0 mm thick CRCA sheet totally enclosed type, dust & vermin proof, back side openable or having opening at bottom for entry of outgoing/incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement (preferably double door type), complete required supporting MS angles, flats, channels eith grouting on floor/brick work & duly painted with powder coated paint of approved grade after preparation of surfaces complete with aluminium bus bar, including making electric connection complete by means of suitable sized aluminium lugs, nots, bolts, washers etc & making good the disturbed surfaes complete all as specified and directed and comprising of the following accessories:-

INCOMING (a) MCCB, 4 pole, 63 Amps 10 KA -01 No. (b) LED indicator lamp with assembily (set of three) RYB suitable for AC 230 Volts complete - 01 set (c) Aluminium Busbar of capacity 100 Amp for 3 phase & neutral.

OUTGOING (a) MCB, SPN 32 Amp, 230 Volts - 02 Nos. (b) Single phase starter with neutral for submersible pump - 01 No. (Make: L&T, Cat No: SS97227OOCO or equivalent model in other makes specified in tender) (c) Controller for LED Light - 01 Set.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric cables heavy duty 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 4 core complete all as specified and directed.

Materials and Labour for surface type point wiring with 2.5 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one independent socket point complete all as specified and directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.

Disconnecting and taking down existing DB incl MCBs and removal from site complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door, 240 volts, 12 way complete all as specified and directed. (MAKE : LEGRAND, Cat No. 507612/ L&T, Cat No. DBSPN012DD / ABB, Cat No. NSYN8690SPN0M12 / or equivalent model in INDO ASIAN (OPTI PRO) / C&S / HAGER / SCHNEIDER )

Supply & fixing of MCB SPN 40 Amps 'C' Series 10 KA 240 volts complete all as specified and directed.

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed.

Supply, installation, testing and commissioning of heater water storage type electric geyser (vertical cilyndrical type) 50 ltrs capacity with BEE 5 star rating (min) and ABS body, porcelain enamel glass lined inner tank incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp complete all as specified and directed. (Make: Havells, Model: Monza Turbo / RACOLD, Model - CDR / AO SMITH, Model- HSE-VAS or equivalent model in CROMPTON / BAJAJ)

Supply only chromium plated copper pipe 15 mm dia, length not less than 45 cm including PVC washers for incoming and outgoing hot and cold water incl all necessary fitting materials complete all as specified and directed.

Supply, laying and testing 15 mm bore GI tubing (medium grade) with new fittings such as bend, Tee, Elbow including welding work for jointing with flange and pipe etc., fixed to walls, and ceilings or laying in floor complete all as specified and directed.

S&F Chromium plated brass Angular stop cock concealed type fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526 / PRAYAG, Cat No: 7210 / JAINKO, Cat No: AVJ-1 or equivalent model in GEM / PARKO / ESS ESS / LAURET / AQUEL)

S&F Chromium plated brass Bib cock, long body with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-512 / PRAYAG, Cat No: 7209 / JAINKO, Cat No: LNJ-1 or equivalent model in in GEM / PARKO / LAURET / AQUEL)

BASU AND CO

ARATI TRADING CO

MS AP CONSTRUTION AND CO

UNIVERSAL TRADING CENTRE

M A ENTERPRISES

RAJ ENTERPRISE

DEB AND COMPANY

PRABIR TRADERS