Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹32.0 L
EMD Value
₹64,100
Closing Date
17 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Renovation of Toilets in side Factory PhaseII inside Factory at HAl Lucknow
8815
HAL-AD/9904/4618/CE/24
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹64,100
17 Aug 2024
27 Jul 2024
27 Jul 2024
17 Aug 2024
Dismantling/ Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) stacking serviceable and unserviceable material separately including cutting reinforcement bars including cleaning, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.
Dismantling/ Demolishing brick work or stone massonry or part there of, built in cement mortar, plain / reinforced including all quoins raches pillers etc. manually/ by mechanical means including collection of servicable material and removal/disposal of dismantled rubbish and unserviceable material with in 50 mtrs lead wherever as directed by E.I.C including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m; All kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if requried, dressing the sides, dispoal of exess surplus soil etc including all labour T&P, lead etc. all complete as per specification, drawing and as directed by Engineer in charge.
Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).
Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) , in super structure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in Foundations, drain, floor, pavement, manhole, approach or any other similar description of works etc including mechanical/ manual mixing, necessary form work, shuttering, compaction, curing including labour, material, T&P etc. all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).
Providing and Plastering 15 mm thick on brick wall/ concrete surfaces in cement mortar 1:6 (1 cement : 6 Coarse sand ) including finishing to an even and smooth surface without using extra cement including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing and Plastering 12 mm thick on brick wall/ concrete surfaces on ceiling in CM 1 : 4 ( 1 Cement ; 4 Coarse sand ) including finishing to an even and smooth surface without using extra cement including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Dismantling old plaster or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing and laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level; Thermo-Mechanically Treated bars of grade Fe-500D or more, of approved make SAIL, TISCON, RINL or as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, welding, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, T&P, wastage, etc. all complete at any height as per drawing, specification and direction of E.I.C.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including cutting, rubbing, curing, moulding and polishing of edges to give high gloss finish, chamfering etc. complete at all levels; Area of slab over 0.50 sqm, joints chamfered in turning point and pointing the joints with white cement (1:2) using marble dust or suitable filler with admixture of pigment to match with shade of granite etc. including cost of all materials, labours, scaffoldings, T & P, wastages, circular/ oval cutting/ general cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing, grinding and polishing of cut edges etc. complete, joints chamfered in turning point including cost of all materials, labours, scaffoldings, T & P, wastages, circular/ oval cutting/ general cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.
Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge;Granite work including cost of all materials, labours, scaffoldings, T & P, wastages, circular/ oval cutting/ general cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : Of area 3 sq. metres and below including cost of all materials, labours, scaffoldings, T & P, wastages, circular/ oval cutting/ general cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of size 63x38, 44x44, 110x44, 83x44 etc of required min thicknessas directed by EIC of approved make like Jindal / Hindalco or as approved by EIC, conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) make Modi Gaurd/Saint Gobain float glass make as approved by EIC, including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.
Providing & applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI to walls of any description at any height / depth nd of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litreincluding preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings, to doors, windows, floors,fittings, etc. to protect from splashes, removing and replacing furniture's, moveable cupboards,chicks, blinds, etc. washing floors, cleaning glass,joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins all complete as per specification & direction of EIC
Providing and applying 01mm thick wall care putty(birla , JK or as approved ) on wall and ceiling for making surface smooth & even including preparation of surface by sand paper, wire brushing, washing down, filling holes, removal of nails etc including scaffolding, wastages, cleaning the surface clean etc.all complete as per direction by E.I.C.
Providing and applying two coats first qulaity of synthetic enamel paint and one coat of suitable primer of Ist quality of Berger/ Asian/ ICI paints of approved brand conforming to relevant IS on all surfaces, new / old, including providing and applying suitable primer, surface preparation, including cleaning the dirt and other impurities, scrapping smooth and filling crevices with approved filler of approved brand, including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make make such as Jaquar/Cera/ L&K/ ARK/ Plumber/ Hindware or other approved by E.I.C., including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge. and as per the direction of Engineer-in-charge.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall or as per manufacturer specifications of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms, of approved quality & make make such as Prayag/ Polyplast/ Lipka/ Polytuf etc. or as approved by E.I.C., including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge. and as per the direction of Engineer-in-charge.
Providing and fixing ISI marked flush door shutters to door frame (MS/ Wooden) 30 mm thick phenol formaldehyde bonded, core of block board construction conforming to IS : 2202 (Part I) of make Gee doors/Kit ply/ Swastik or other approved make, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges 125mm size with necessary screws all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC.
Supplying and fixing in position door fittings etc all complete including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete; Twin rubber stopper
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore including all labour, material, T & P, loading, unloading, transporting, cutting and welding of pipe line (if requried) all complete as per specification and direction of EIC.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore including all labour, material, T & P, loading, unloading, transporting, cutting and welding of pipe line (if requried) all complete as per specification and direction of EIC.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of Modi /Saint Gobain or as approved make with hard board backing fixed with WPC/PVC frame of rectangular shape, approved design fixed with necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm of Modi /Saint Gobain or as approved make with hard board backing fixed with WPC/PVC frame of rectangular shape, approved design fixed with necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms; 15 mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber or other approved by E.I.C.,including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Supplying and fixing C.I. cover without frame for manholes :455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg including making good with cement mortar including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC.
Providing and fixing glass Urinal Partition, chamfered size 450x900mm or as per site requirement and market availability, wall mounted, 12mm thick toughened glass cut to length, fixed on wall with SS304 heavy duty L bracket with insert, necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes; 75 mm diameter of approved make such as Supreme, Diplast , hindware, prince, or equivalent approved make in trenches/ floors / walls including necessary required fittings such as reducer , collars, clamps etc and adhesive for jointing the pipe for sewerage and jointing with PVC adhesive of approved brand including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC..
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes;110 mm diameter of approved make such as Supreme, Diplast , hindware, prince, or equivalent approved make in trenches/ floors / walls including necessary required fittings such as reducer , collars, clamps etc and adhesive for jointing the pipe for sewerage and jointing with PVC adhesive of approved brand including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC..
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 75 mm bend including necessary adhesive for jointing the pipe for sewerage and jointing with PVC adhesive of approved brand including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 110 mm bend including necessary adhesive for jointing the pipe for sewerage and jointing with PVC adhesive of approved brand including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC.
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter
Providing and fixing PTMT /CP grating of approved quality and colour; 100 mm nominal dia including necessary jointing including all labour, materials, tool & plants, wastage etc. all complete as per direction of EIC.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (oval /bowl shape) of ' Parryware / hindware/ cera /somany make or approved equivalent make fixed in MS brackets, including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively of make Parryware / hindware/ cera as approved by EIC, with 32 mm C.P. brass waste coupling of standard pattern including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of Parryware/ Cera/ Hindware make as approved, (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. with W.C. pan with white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with 100 mm P or S trap, all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including 40 mm dia PVC bend, including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc.,complete all as per specification and as directed by Engineer In Charge.
Providing and fixing toilet partition of HPL, modular type panel build of make SIO, Finilex or equivalent as approved, of size 2100x900x1550 with door opening 550mm or as directed by EIC including all stainless steel fitting & accessories viz. self closing hinges, SS door handle 150mm- 02nos., Tower bolts 150mm- 02nos etc. making hole, fixing in position, cutting, nails, screws etc. complete including cost of all labour , material, T&P, wastges, fittings, SS screws, fasteners etc. all complete as per specification and as directed by Engineer In Charge.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests of Parryware/ Cera/ Hindware make as approved, including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing 8 mm dia C.P. / S.S. Health faucet /Jet with flexible tube upto 1 to 1.25metre long with S.S. triangular plate to Eureopean type W.C. of suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete of standard make & size eg L&K, Hindware, Jaguar, essess, Prayag, Cera of approved make to be fitted to concealed water supply line including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives; New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete, weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including suitable primer of same manufacturer & its recommendations, preparation of surfaces &, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 450x350mm / 350 x 250 or larger size of kajaria / johnson/ nitco/ orient-bell or equivalent approved make shades, pattern and print / design on walls, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Taking down carfully damaged / old wash basin, EWC , urinal etc inculding all fitting and removing of debris at directed place including labour T&P etc all complete and as directed by EIC materials near the site and disposal of unserviceable materials within 50 metres lead including all fitting and removing of debris at directed place including labour T&P etc all complete and as directed by EIC.
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore including all fitting and removing of debris at directed place including labour T&P etc all complete and as directed by EIC.
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 75 mm dia including loading/ unloading and removing of debris at directed place including labour T&P etc all complete and as directed by EIC.
Supplying and fixing of touch free Automatic liquid soap dispenser (SS or aluminium/ ABS body, sensor based) of 1.00 liter capacity (approx) of Kent ,Hindware, Jaguar, parryware, darphy euronics or equivalent approved make complete including cost of all labour , material, T&P, wastges , ss clamps, screws, fasteners etc. all complete as per specification and as directed by Engineer In Charge.
Supplying and fixing of Hand Dryers (SS body) of size approx 240x270x200mm or larger having drying time 10 sec, RPM 12000, air speed 30 m/sec blowing volume 270 cum/hr. and power 2500 watt or as per manufacturer specification of approved make eg Kent, Hindware, Jaguar, Cera, euronics, darphy or equivalent approved make complete including cost of all labour , material, T&P, wastges , ss clamps, screws, fasteners etc. all complete as per specification and as directed by Engineer In Charge.
Providing fabricating, erecting, Structural steel work riveted, bolted or welded in built up sections, trusses and framed work purlins, crain, gantries, rails & fastnings and heavy bracket framing (beam, Tee, angle, channel, tubular , rectangular, square, flat,, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete etc all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Disposal of dismantled material like Lime, moorum, building rubbish, brick, concrete, MS parts etc By Mechanical Transport including loading,unloading and stacking upto 2.0 km distance all complete as per specification & direction of EIC.
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe of colour white/ Ivory, floor mounted (ladies urinal) of Parryware / Hindware/ Cera or approved make. The plates shall conform to IS 2556 (Part -6) 1995 including specification for vitreous sanitary appliances (vitreous china), part 6 & Specific requirements of urinal section 3, squatting plates. The size shall be of size 600 x 350 mm or 450x350 mm one piece construction as per site requirement . Each urinal shall have integral longitudinal flushing pipe of suitable type which may be connected to flush pipe.including providing and fixing PVC/ CI floor trap, push type concealed flushing system, flushing pipe, CP concealed stop valve etc. complete including laying in floor with cement concrete, including the cost of all materials, fittings, labour, wastages, T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber or other approved by E.I.C.,including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber or other approved by E.I.C.,including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing CP/ PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 for urinal of ARK/ Esses/ Jaguar/ Mac/ Plumber make or approved by EIC, including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge. gms
Providing and fixing P.V.C. waste pipe for sink or wash basin of approved make and standard size including P.V.C. waste fittings complete. 32 mm dia including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing uplasticised PVC connection pipe with brass unions - 45 cm length, 15 mm nominal bore including the cost of all approved materials,labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the walls etc:15 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the walls etc:20 mm nominal dia Pipes
Above
HAL-AD/9904/4618/CE/2024
Renovation of Toilets in side Factory (Phase-II) inside Factory at HAl Lucknow)
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.64100.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.03 MB
TECHNICALBID.pdf
TENDER_DOCUMENT • 0.74 MB
BOQ1.xlsm
TENDER_DOCUMENT • 0.19 MB
PQ.xlsx
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .