Providing paver blocks and Lawn Benches (3 No.s) adjacent to Visitors parking towards parking area of BSNL Bhavan, Adarshnagar, Hyderabad including 5 No.s of Stainless steel dust bins in the compound

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m.

All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.

60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern

Providing and fixing Stainless steel (SS) Pole supported dust bin in Parking area of size 300 mm dia and 600 mm height supported to steel poles of 900mm in height embedded in concrete firmly fixed to ground (capacity of dust bin 40Liters) ., etc all complete as per directions of engineer in charge.

Providing and fixing RCC Garden Rectangular Bench (3-seater) with BSNL logo., 100mm wall thickness, with back rest, chair of size 1.52 meters in length and 0.41 meters in width, back rest height shall be of 0.46 meters with natural surface finish with foot rest of height 0.45 meters height, of 100mm wall thickness with 0.45 meters width of required colour, with self weight of 300kgs and load bearing capacity of 200kgs., etc all complete all as per the directions of engineer in charge