GE/BAS-63/2023-24 Special repair to pump house No 2,3 and 4 at Madhopur under GE Basoli

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed .

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed .

S&F Prelaminated particle Board,18/19mm thick Board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work.. complete all as specified and directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

S&F 30 mm thick Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick Figured glass and glazing with oil putty in square n exc 0.5 sqm in each pane. complete all as specified and directed.

S&F for 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws ,ISI marked, complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type dia not less than 16 mm) including fittings and fixtures ,ISI marked, complete all as specified and directed .

S&F 100 mm long mild steel hasp and staple stove enameled black with bolts to hinges , complete all as specified and directed .

S&F Curtain rod 20mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm complete all as specified and directed .

S&F Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F aluminium Peg set of six hooks size 50mm to 60mm complete all as specified and directed .

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed ..

M&L of treatment with the following specification - Removing existing water proofing treatment including brick tiles and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.30 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE. complete all as specified and directed .

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed .

M&L for brick tiles laid flat as in roof in CM 1:3 including 15mm thick screeding in CM (1:6) finished even and smooth mixed with water proofing compound(WPC shall be measured and paid separately) complete all as specified and directed.

All as per item No 30 here-in-before but execpt tiles complete all as specified and directed.

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed .

S & F rolled mild steel Fe-410-W(Gde-E-250) quality -B Roof trusses (framed) trussed,purlins,crane gantries,rails and fastening and heavy bracket framing(Beam,tee,angle,channel or flat sections)including distance pieces,cleats etc including red oxide and two coat of synthetic enamel paint complete all as specified and directed .

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 110 mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps with cement joints complete all as specified and directed.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps with cement joints complete all as specified and directed.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.

S&F in repair cast iron cowl for 75 mm dia complete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F in repair wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repairs towel rail 600 mm long of CP fixed with and incl Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed .

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including waste coupling 40 mm dia ,fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed .

S & F in repair vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge and CP jet spray complete all as specified and directed.

S&F In repair Vitreous china wash basin white , flat back size 450 X 300 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed .

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC , complete all as specified and directed .

S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests including flushing cistern with PVC Connection & flush pipe, including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth, complete all as specified and as directed.

Refixing of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

Refixing of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed .

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed .

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade including 25 mm thick sand cushioning complete all as specified and directed

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Machine cut kota slab flooring 16-18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L Machine cut kota slab as in skirting/dado etc 16-18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 10mm thick rendering in cm 1:4 for complete all as specified and directed.

M&L for Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes. complete all as specified and directed

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and directed

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed .

M&L for Rendering 05 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed .

M&L for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed .

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement. complete all as specified and directed .

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 incl Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed .

M&L for Preparing new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic , antifungal emulsion exterior weather proof paint on external surfaces complete all as specified and directed .

M&L for Preparing new plastered surface of wall and applying three coats of white wash complete all as specified and directed .

M&L for Preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed .

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed

S&F in repair stop valve/Angle valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type.. complete all as specified and directed .

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in landing,cover slabs, manhole cover including necessary form work as required complete all as specified and directed.

M & L for cleaning, breaking, loose concrete, cleaning of reinforcement and filling plain cement concrete 1:1 1/2 :3 type B0 using 12.5mm graded aggregate at places as per direction by E-in-Charge (the cost of scafoldings, formworks deemed to be included in the item) complete all as specified and directed.

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion over and including 3mm thick wall care puttyon plastered surfaces. complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia of pipe complete all as specified and directed.

S&F in repair Steel rolling shutters, thickness of laths1.25 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,in including taking down complete: push pull or manual type complete all as specified and directed.

S&F in repair Ball bearing for rolling shutters complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum in any type of soil, getting out, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm in any type of soil complete all as specified and directed.

M & L cement concrete (1:3:6) type C-2 using 40mm graded crushed stone agg as in drains beds and surface channels etc including demolition of existing PCC complete all as specified and directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc incl all drilling bolting riveting etc and similar works conforming to Fe- 290 gde E-165 complete all as specified and directed.

S & F galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured) complete all as specified and directed.

S&F Mild steel 10mm dia round bars as in strengthening of chain link fencing complete all as specified and directed.

M&L Applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

Supply and fix mild steel galvanised chain link of mesh size 150mm x 100mm and thickness of line wire 4.00mm dia with 1mm thick PVC coating including fixing with straining bolt, binding wire etc including dismantling fencing wire mesh any type complete all as specifed and directed.

S&F Mild steel bolts (purpose made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 15cm long and dia of neck 12mm complete all as specified and directed

Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth for foundation of pole/stay and laying of UG Cable and other and getting out complete all as specified and directed.

Removal of excavated (soil) material to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified and directed

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.50 core including takingout existing complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

Suppy and fix gate valve 20mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

M&L for Earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the galvanised iron earth lead 32mmx6mm (GI Strip) size, by means of nut, bolts, check nuts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edge of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in any type of soil, returning filling in, removing soil to a distance not exceeding 50 mtr all as per plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supplying & Fixing sluice valve flange type of 150mm diaPN-1.6 grade with stainless steel spindle and brass check nut (non raising spindle type conforming to IS:14856) including fixing to pipe line with nuts, bolts and washers, rubber gasket (neouprene) complete, complete all as specified and directed.

Repair to reciprocating pump chemical feeder for injecting calcium hypochloride employing including replacement of operating reciprocating chemical system having output of 10-150 LPD and adjustable high pressure of upto 5-7 Kg/cm with high pressure single head gear system adjustable dozing pump, suitable for working on single phase supply with replacement of madatory accessories like lead tubing, connecting nuts, viay weight, ferrulus, liquid end of dozing system including unsv serive tanks of cap 100 Ltrs complete in all respect all the parts shall be replaced as per norms of OEM and after repair testing will be carried out in the presence of Engr-in-Charge, complete all as specified and directed.

HARI OM ENTERPRISES

M/s. Aggarwal Engineers

BALKRISHAN GUPTA AND SONS

Ashoka Engineers

Om Sai Ram Builders

M/s. Jaswant Singh Govt Contractor