Loading…
Loading…
Tender Value
₹54.6 L
EMD Value
₹1.1 L
Closing Date
6 May 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: In case tender value Rs. 50 lakhs or more, The tenderer must have minimum average annual contractual turnover of V/N or 'V" whichever is less; where V= Advertised value of the tender in crores of Rupees= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
Eligibility Criteria means any contract which have satisfactorily executed & completed by the tenderer, which are mentioned as below as similar nature of works. As regards the similar works, the tenderer should have satisfactorily executed Work of 1.Electrification of Service building. 2.Electrification of Staff quarters. 3.Electrification of offices. 4.Electrification of road and colony lighting 5.Electrification of circulating area lighting 6.Erection and commissioning of LT, HT up to 33 KV overhead lines. 7.Substation installation and commissioning. 8.Electrification of washing pit, sheds & workshops etc. 9.Comprehensive/semi comprehensive maintenance of service building or staff quarters or sub stations or DG set or lifts. 10.Annual electrical maintenance contract of train lighting and/or air conditioning coaches excluding RMPU units of AC coaches. 11.Any above work or combination of (1) to (10) above. Tenderers should submit documentary proof in regards to fulfilling these eligibility criteria along with their offer. In case of any ambiguity, the decision of Chief Electrical Engineer in regards to classification of work will be final.
For participating in tenders for an electrical nature of work, the contractor shall have to possess valid electrical license of appropriate voltage issued by any State Government under Clause 45 of Compilation of Rule of Indian Electricity Rules 1956 or as amended from time to time. Electrical works of 11KV and above including OHE, 'A' class Electrical Contractor license is essential. 2. The license can be possessed with one of the partners or in his own name if sole proprietor. Firm should submit a self-attested copy of the Electrical Contractor License along with the offer; otherwise the offer will be summarily rejected.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. IN case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
17 conditions · 1 needing a document upload
Tenderers are requested to submit their offers as per GST Tax regime. All the tenderers should ensure that they are GST compliant and their quoted tax structures/rates are as per GST law.
Conditions regarding inclusion of "Letter of credit" as mode of payment attached as "Annexure LC". As per Rly Bd Letter No. 2018/CE-I/CT/9 dt. 04.06.2018, special condition of LC has been applied. The contractor shall have the option to take payment from Railway through a letter of credit (LC) arrangement for all the tender having advertise cost of Rs. 10 Lakh or above
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter during execution of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Latest GCC has been introduced and published / available on railway's website. The provisions of GCC will be applicable on all tenders published here after. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC, while execution of work.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract ( copy uploaded and attached with this tender). In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. And upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as par clause 55 C (i) of Indian Railways General Condition of Contract.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____ Month, _____Year."
Part(A):BPL Division - Provision of 750V power supply for maintenance of HOG coaches in washing/ sick lines of maintenance depots/IOH Sheds, RKMP. Part(B):Bhopal Division: SHRN-phase-I yard remodeling in connection with provision of turnout for utilization of platform no 3 and 4 lines by MKC direction trains.(yard remodeling)
ELECT-GEN-BPL-T-08-2026
ELECT-GEN-BPL-T-08-2026
Open
Works - General
3 Months
Bhopal, Madhya Pradesh
₹0
₹1.1 L
6 May 2026
13 Apr 2026
22 Apr 2026
92 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 40,94,156.26 | ||
| details. | Breakup for | — | — | ||
| Supply, erection, testing and commissioning of (4 ways) MS Junction box made by 18 SWG MS sheet minimum size 200x150x100 mm with locking arrangement as per Railway site requirement. | — | — | — | 1,52,782 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of 12 ways double door single phase Sub Distribution Board (SDB) comprising 1x32A TPN C series MCB as incoming and 8x16 A SP C series MCBs as outgoing as per Technical specification attached. Make - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 39,075.4 | |
| details. | Breakup for | — | — | ||
| Supply & laying of HDPE pipe heavy duty of 120mm/125mm dia (PN-6, PE-100) along with all required material for joining the pipes for provision of cables in pipe as per site requirement as per specification attached. | — | — | — | 1,72,035 | |
| details. | Breakup for | — | — | ||
| Laying, erection, connection and testing of PVC Aluminum armoured cable in the following manner and as per railways specification attached. (Note: Cable will be supplied by Railway at concerned depot.) | — | — | — | 3,75,708.2 | |
| details. | Breakup for | — | — | ||
| Supply of material and digging of trench in concrete area 30cms deep and 30cms wide and laying of pipe or cable. The Contractor has to replaster the surface/floor with cement concrete etc. (All the other material will be supplied by the contractor) as per specification attached. | — | — | — | 15,241.2 | |
| details. | Breakup for | — | — | ||
| Supply, fabrication cutting & fixing of MS channel /MS angle/square pipe on existing structure with suitable clamps & nut bolts etc. iron bar for RCC and MS sheet suitable for trench cover etc. | — | — | — | 1,69,728 | |
| — | 150.00 | — | — | ||
| Supply & installation of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating120 gsm as per IS:277 in 240mpasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mmdiameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | — | — | — | 1,00,917 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Testing and commissioning of 15KVA, 415/750V Trolley mounted portable testing unit for electrical functional testing of LHB type Coaches for IOH SHED complete in all respect as per technical specification attached. | — | — | — | 3,22,140 | |
| — | 4.00 | — | — | ||
| Supply & erection of Precooling cum battery charger socket panel as per technical specification attached. | — | — | — | 2,11,534.4 | |
| — | 2.00 | — | — | ||
| Supply & erection of Battery charger of 200A & 110 Volts (output) as per technical specification attached. | — | — | — | 3,98,328.24 | |
| details. | Breakup for | — | — | ||
| Supply and installation of On load change over switch 4 pole 800A capacity suitable for 750 volt system with enclosure as per technical specification attached. Make - L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 2,84,000 | |
| details. | Breakup for | — | — | ||
| Supply and installation of 630A, 50kA, 4P MCCB with spreader in enclosure suitable for working voltage of 750 Volts AC supply as per technical specification attached. Make - L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 1,30,000 | |
| details. | Breakup for | — | — | ||
| Supply and installation of 400A, 50kA, 4 P MCCB with spreader in enclosure suitable for working voltage of 750 Volts AC supply as per technical specification attached. Make - L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 4,40,000 | |
| details. | Breakup for | — | — | ||
| Supply and installation of Contactor 4 Pole, 330 to 370 Amp, 430 volt having 2 NO and 2 NC contacts equal to model KCL 330 of KOEL or AF 370 model of ABB contactor or as per site requirement and as per technical specification attached. Make - L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 1,60,000 | |
| details. | Breakup for | — | — | ||
| Description: Supply, installation, connecting, testing and commissioning of digital timer switch 16A capacity, complete with associated accessories & enclosure. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 25,392.7 | |
| details. | Breakup for | — | — | ||
| Description: Supply, installation , testing and commissioning of 3 pole power contactor type ML-2, 32A capacity as per timer above. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 28,437.4 | |
| details. | Breakup for | — | — | ||
| Design, fabrication, Supply of complete material, erection, testing and commissioning of Outdoor type LT panel as per technical specifications attached with 1X400 A FP microprocessor based MCCB as incomer along with suitable Current transformer, Ammeter with selector switch, voltmeter with selector switch, set of LED pilot (complete assembly) for R, Y, and B phases, copper bus bar to cater load of 800A, digital energy meter for feeder and suitable space for ZS socket of 400A in MSsheet enclosure with all accessories to accommodate the above switchgears, busbar, etc. ( Note :- All the LT switchgear required for the panel should be suitable for working voltage of 750Volts AC supply). Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 3,34,957.26 | |
| — | 6.00 | — | — | ||
| Supply of ZS coupling socket of 400 Amps., 750 volts with top, cable & locking arrangement as per RDSO specification. | — | — | — | 4,15,434.06 | |
| — | 2.00 | — | — | ||
| Shifting of existing panel /ZS coupling panel by removing from old place transport to new place and install panel with construction of foundation including cable connection in all respects | — | — | — | 19,903.84 | |
| — | 10.00 | — | — | ||
| Cement concrete of M25 grade for all works in sub-structure & super structures including all type of shuttering/centring etc. complete for foundation plinth, tranch cover, etc. Iron bar if required will be supplied in iron. | — | — | — | 42,139 | |
| details. | Breakup for | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
RB200824GOI190724.pdf
ATTACHMENT
GCCAmendments1to10_1.pdf
ATTACHMENT
GCCamendmentcorrectionslip11.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22_1.pdf
ATTACHMENT
AnnexureVIB_1.pdf
ATTACHMENT
AnnexureLC_1.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights_1.pdf
ATTACHMENT
SpecialCondition.pdf
ATTACHMENT
Technicalspecifications.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .