8124/SAR-T-24/2024-25 PERIODICAL SERVICES AND MISC CONNECTED ITEMS IN RESTRICTED AREA OF SG SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (water proofing compound to be paid separately under relevant item) all as specified.

Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for preparation of new plastered surfaces of walls and applying Two coats of Oil bound distemper of approved tint over 1mm thick wall care putty complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying Two coats of weather proof exterior emulsion paint including primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings & applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified.

M&L for preparation of old decorated surfaces of walls including complete removal of existing treatment and then applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification & as directed. Note : Scrapping of existing surface to be done by mechanical sander with internal dust extraction system for clean environment certified by paint manufacturer at any height including neccessary scaffolding. Make : Asian Paints Royal (10 years product warranty) or Nerolac (10 yrs product warranty)/ Berger (10 yrs product warranty).

M&L for preparation of old decorated surfaces of walls including complete removal of existing treatment and then applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm & as directed. Note : (i) Scrapping of existing surface to be done by mechanical sander with internal dust extraction system for clean environment certified by paint manufacturer at any height including neccessary scaffolding. (ii) Primer and emulsion application to be carried out through air less spray machine. Proper masking to be carried out befor primer and paint application. Make : Nerolac Excel top guard (10 years product warranty)/ Asian paint ultima protect (10 yrs product warranty)/ Berger weather coat long life (10 yrs product warranty).

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper of approved shade/tint all as specified & as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of weatherproof exterior emulsion paint of approved shade/tint all as specified & as directed.

Complete removal of existing treatment on walls all as specified and directed by Engr-in -Charge.

M&L for preparation of old decorated plastered/unplastered surfaces of walls & applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified..

M&L for preparation of old decorated plastered/unplastered surfaces of wall and applying Two coats of weather proof exterior emulsion paint including primer complete all as specified and directed.

Complete removal of existing treatment on ceiling complete all as specified and directed by Engr-in -Charge.

M&L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified..

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint all as specified.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer all as specified.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 20mm bore Medium grade fix to wall/floor fixed complete all as specified.

S&F in repairs 15/20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed , minimum weight - 210 gms of including taking down existing ball valves any type all as directed by Engr-in-Charge.

S&F as in repair vitreous china wash down water closet pan (Pedestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.

S&F as in repair vitreous china squatting pan of orrisa pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F in repairs vitreous china wash basin white, flat back, size 550x400mm including pillar tap brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia complete all as specified.

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge Make Jaguar/ Roca/Kohler/Prayag or Eqivalent

S&F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified. Make Jaguar/ Roca/Kohler/Prayag or Eqivalent

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete Make Jaguar/ Roca/Kohler/Prayag or Eqivalent

S&F in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repairs fancy typer Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

S&F in repairs fancy type wash hand basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed.

S&F in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F in repair fancy type bib taps (Long body), chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.

S&F in repair Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.

S&F in repair 15mm bore fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of complete all as specified & directed by Engr-in-Charge.

S&F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE. Make Jaguar/ Roca/Kohler/Prayag or Eqivalent

S&F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified.

S&F in repairs Sink Coupling including PVC flexible waste pipe 80cm long with socket for union, complete all as specified.

S&F as in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m

S&F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long L-bend pipe complete all as specified & directed by Engr-in-Charge.

Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified & directed

S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.

M&L for 3mm thick froasted glass and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed

S&F in repairs stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed.

Dismentling floor, hearth or wall tiling incl cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. Make :1st qualityof Kajaria/HR Johnson/Somany or equivalent

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.

RAJAN TRADERS

DHARAMPAL SINGH AND SONS

NAQLI LAL SHARMA AND ARUN SHARMA

BRIJ CONSTRUCTIONS