Karnataka

Active

Works

Buildings

Annual Maintenance of Sanitary,water supply,carpentary & other allied works to KK Annex Employees Quarters at kumara krupa road , Bangalore ( Period 01/08/2026 To 31/07/2027)

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 2 Jul 20266d left

Tender Value

Refer Docs

EMD Value

₹50,000

Closing Date

2 Jul 2026, 9:30 pm6d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Annual Maintenance of Sanitary,water supply,carpentary & other allied works to KK Annex Employees Quarters at kumara krupa road , Bangalore ( Period 01/08/2026 To 31/07/2027)

Tender Information

Tender ID

308450

Reference Number

PWD/2026-27/BD/WORK_INDENT37011

Tender Type

Open

Product Category

Buildings

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredBidder should upload valid KPWD Class-IV Civil License

RequiredAnnual turnover certificate along with UDIN

RequiredBid Capacity Calculation as per KW Document

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

NIL

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-2 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should upload valid KPWD Class IV Civil License and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

Agency Should upload Employees provident fund (EPF) & ESI registration certificate, and also should upload copy of receipt of the last six months for the payment made for the same

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-2 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

Bidder Shall Abide by the Prevailing Labour laws and minimum wages act.

The Quoted Rates Shall be excluding GST

The labour wage rates have been adopted in accordance with Karnataka Government Notification No. Labour Department 411 LDWA 2023 dated:22.05.2026 . In respect to these rates, Writ Petition No. WP -16145/2026 is pending before the Honarable High Court of Karnataka at Bengaluru. Therefore, the said rates are subject to the final judgment /order of the honorable Court.

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 b)Satisfactory completion as prime contractor in similar construction works to an extent of 50% of the cost of the work i.e. Rs 10.09 Lakhs

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.20.18 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 12 month. B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 12 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity calculation

Others

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

Fee & Financial Details

Tender Fee Amount

₹510

EMD Fee Amount

₹50,000

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

3 Jul 2026

Download Ends

29 Jun 2026

BOQ Preview

•

Annual Maintenance of Sanitary,water supply,carpentary & other allied works to KK Annex Employees Quarters at kumara krupa road , Bangalore ( Period 01/08/2026 To 31/07/2027)

•

Cleaning of Water Storage Tank or Sump by following method: (1) Empty the Tank/ Sump and make it to near dry, (2) Apply blEaching powder uniformally (@ Tank capacity x 0.5 gms/litre) inside the Tank/ ...

•

External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut ...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 32 mm dia

•

Providing and fixing German Polyamide flexible connection hose with winged nuts 450mm with all concealed fitting arrangements & all necessary accesories complete - class - Economy

•

Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Economy

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm

•

Providing and fixing PTMT Swan neck cock of approved quality

•

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres sucti...

•

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plasterin...

•

Repairing door and window frames with available wood to the required

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards.

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materi...

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy

•

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & a...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

structural strengthening with Epoxy Injection Grout - Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cr...

•

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Engaging Plumber, work to be carried out as per the instruction of Engineer-in-charge of the work (Notification No. KAE 83 LWA 2022 Dated 13-01-2023 Sl No. I )

•

Engaging Carpenters Class-1 , work to be carried out as per the instruction of Engineer-in-charge of the work (Notification No. KAE 83 LWA 2022 Dated 13-01-2023 Sl No. I )

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW2 GENRAL 37011.doc

Tender Document • 0.87 MB

Ready to Participate?

Download all tender documents and submit your bid