ADDN/ALTN TO SNCOs BILLET AT AF STN BIKANER

Amount

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified

Dismantling of bricks(laid flat or on edge) or brick tiles in roof, floors, channels kerbs,aprons etc (each layes) laid bedded and pointed in any mortar

M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.0 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 150 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longtitudinally, At the junction of roof and parapet wall a grove of 20 x 20 mm shall be made at the ht of 100 mm and membrane shall be inserted and sealed with bituminious mastic joints/overlap shall ve saled with hot bitumen 85/25. Two coat of water proofing bituminious aluminium paint on top of APP membrane shall be applied all as directed by Engineer -in- charge.

Supply only integral water proofing compound ISI marked.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified & directed

M & l for 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth using extra cement with WPC @ 3% by weight of cement, complete all as specified and as directed. Note : WPC will be measuredpaid seperately.

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigments in floors, and cut and polished including 15mm thick screed bed in CM(1:6), complete all as specified .

Material and labour for providing cement concrete PCC (1:2:4) type B1 (20mm graded crushed stone aggregate) as in roof padding complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

M&L for brick work with old size sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar 1 : 6, complete all as specified & directed.

M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by carefully chipping , removing existing loose/damaged concrete cover etc, and cleaning all exhisting reinforcement bars with wire brush and applying alkaline rust converter primer on exhisting reber and allowing it to react with rust for 06 hrs and form corrision resistant layer , then applying zinc rich anti-corrosive protective coating on reinforcement bars as per manufacture instructions , and fixing welded wire mesh fabric size 50X50 mm with 3mm dia , plaster and plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 25 mm and making the surface even including 15mm thick plastering in CM 1:4 on concrete surfaces , finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out Note.- Where ever reinforcement/MS steel required will be measured and paid separately

Providing & fixing hard drawn MS steel wiremesh 50mm X 50mm with 3mm dia wire with Heavy duty nails, Fixing the mesh on the ceiling before gunniting work.

Dismantling stone and tiles of any description or thickness in floor aprons etc complete all as specified & directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Mirror finishing) complete all as specified & directed

Material and labour for grinding and polishing (Mirror finishing) of existing kota stone flooring, with machine and filling joints with white cement and pigment to match the existing colour complete all as spd and directed

Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed.

Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube,complete all as specified & directed

M&L factory made solid panel pvc door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified & directed

Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed.

Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed.

Material & Labour for factory made pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc over complete all as specified.

Supply and fixing plain, factory made, Plain framed, panelled shutter (two panel) 35 mm thick of 2nd class hardwood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed.

Supply and fixing factory made glazed and gauged skeleton shutters 35mm thick, 2nd class hard wood 'Hollock' open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc incl priming coat. The size of member of shutters as spfd in SSR Part-1 Section 8 clause 8.24 (a) incl kiln seasoned and chemically pressure treated, complete all as specified & directed.

Material & Labour aluminium anodised barrel tower bolts extruded section of size 200 mm complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm fixed as in repairs complete all as specified & directed.

Supply and fixing extruded aluminium handle fabricated type anodised of size 150mm complete all as specified & directed.

Supply and fixing extruded aluminium handle fabricated type anodised of size 150 mm fixed as in repairs complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt fixed as in repairs with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing Galvanised mild steel wire cloth, in new doors and windows 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.

Material and Labour for preparation of new surfaces of wood & wood based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new steel & steel based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) incl for angle iron,fencing post,Rolling shutter etc. complete all as specified & directed.

M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as spd & directed.

Supply and fixing in repairs long body Bib taps,chromium plated cast copper alloy with quarter turn handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.

Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all asdirected.

Supply and fixing in repairs fancy type angle stop valve, chromium plated,screwed down, high pressure with quarter turn handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply & fixing PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, complete all as specified & directed.

Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified & directed.

S&F as in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed.

S&F in repair tubular towel Rail 20 mm dia and length 600 mm of brass chromium plated complete all as specified and directed.

S&F in repair curtain road 30mm dia of brass chromium plated includingwith fixing brackets and all necessary decorative & ornamental fittings complete all as spd and directed

S&F in repair soap dishchromiume plated approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

Material and labour rendering 15 mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over and including a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage pattern of approved tint / shade(s) over and including a coat of water based primer complete all as specified and directed.

Materail and Labour for complete removal of existing paint and preparation of old surfaces of walls and applying two coats of oil bound distemper on walls all as specified and as directed by Engr-in-Charge.

Materail and Labour for preparation of plastered or unplastered old surfaces of ceiling and one coat of white wash on ceiling all as specified and as directed by Engr-in-Charge.

M&L for for 3 mm thick wall care putty on walls in two coats and after complete drying rubbing getting with emery paper greater than 500 complete all as specified and directed.

M&L for for 3 mm thick wall care putty on ceiling in two coats and after complete drying rubbing getting with emery paper greater than 500 complete all as specified and directed.

S&F Harrison rails in repair mild steel, anodised aluminium with fixing brackets, stops, rollers etc.

S&F as in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps, complete all as specified.

S&F as 110mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified.

S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.

Material & Labour Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete.

M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 350X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed by engr-in charge.

Demolition of Cement concrete of any description in any position not otherwise specifically provided for sunkan floors including removal of debrish our of MOD land complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick cement plaster 1:4 with water proofing compound for sunkan floor treatment finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-In-Charge. Note:- WPC will be paid separately.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by complete flamed forced application complete all as specified.

M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm incl. cleaning surfases complete all as specified and directed by Engineer-in-charge.

M&L cement concrete Type E2 1:5:10 (40mm graded crushed stone aggregate) in sunkan floor complete all as specified and as directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.50mm graded crushed stone aggregate) in floor complete all as specified and as directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains as in 100 mm dia pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all as specified and as directed by Engineer-in-Charge.

Removing of existing branch drain of 100 mm dia pipe making good to walling and rendering, cutting out branch channel and making good benchings all as specified and as directed by Engineer-in-Charge.

S& F of Salt-glazed stone ware gully traps, of size 180x100mm square or round mouthed, tvpe 'P' all as specified and as directed by Engineer-in-Charge.

M& L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement as in repair all as specified and as directed by Engineer-in-Charge.

M&L for PVC (SWR) floor trap, outlet 75 mm plain with grating including jointing with solvent cement as in repair all as specified and as directed by Engineer-in-Charge.

Cast iron floor trap, 100 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) as in repair all as specified and as directed by Engineer-in-Charge.

S& F of PVC (SWR) 'P’ trap 110 mm in repair all as specified and as directed by Engineer-in-Charge.

S&F as in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and complete all as specified and as directed.

S & F Framed work as in Steel Gate of angle or other section with gusset plate, rails, braces, stair case etc Fe 410-W (Gde-E-250) quality 'A' complete drilled for fixing of steel including welding etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing and building upto 8 mtr complete all as specified and as directed.

S&F1.00 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F as in repairs of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate complete all as spd.

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares n.ex.c. 0.50sqm in each pane complete all as specified and as directed.

Supply and Fixing in repairs, pre cast cement concrete jallies, 35 mm thick, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) including wire fabric set and jointed in cement mortar 1:6 complete all as directed by Engr-in-Charge.

M&L for Complete removal of existing/old treatment by mannualy and mechnically and preparation of surfaces using necessary filling compound of putty to obtain smooth regular/even finish using sand paper and applying two coat of exterior emulsion paint (tint as approved by GE ) on wall height upto7.50 mt. and any position complete all as specified and directed by Engineer - in- charge.

M&L for PCC 1:2:4, with 12.50 mm graded crushed stone aggrgate as in filling of pressed steel hollow frame door chowkhat complete all as specified and directed.

BIDAWAT ENTERPRISES (BID ID -3426166)

SHREE GURU NANAK CONSTRUCTION COMPANY (BID ID -3425613)

S S CONSTRUCTION COMPANY (BID ID -3424741)

JAMUNA CONSTRUCTION AND GENERAL ORDER SUPPLIER (BID ID -3421216)