Annual Maintenance and Repair Works for Residential and Non Residentail Building (CE office Noida Zone at Sec-16, Guest House/Shakti Sadan Sec-38 and DR Center at Sec-58 Noida) at Various Sub-Station Noida Distt. GB Nagar Hydel for F.Y 2026-27

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR Code 2.25 (a)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. DSR Code 2.31

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. DSR Code 2.32

Centering and shuttering including strutting, propping etc. and removal of form for. Foundations, footings, bases of columns, etc. for mass concrete. DSR Code 5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for. Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR Code 5.9.2

Centering and shuttering including strutting, propping etc. and removal of form for. Shelves (Cast in situ) DSR Code 5.9.4

Centering and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR Code 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for. Columns, Pillars, Piers, Abutments, Posts and Struts. DSR Code 5.9.6

Centering and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick DSR Code 5.9.20

Centering and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick DSR Code 5.9.21

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR Code 4.1.10

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 4.2.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 4.1.3

Precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement, approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:2:4, excluding reinforcement but including fixing the same in position including cost of all other material, labor and T&P. NSI Ref CSI No. 5.09 (SOR 23-24)

Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.15

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). DSR Code 5.23

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 4.1.2

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) DSR code 4.5.1

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.3

Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.5

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 5.1.2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.2.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Code 6.1.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Code 6.1.2

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Code 6.2.1

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). DSR Code 6.2.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Code 6.4.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Code 6.4.2

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR Code 6.13.2

Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. NSI Ref CSI No. 6.18 (SOR 23-24)

Same as in item 6.18 above but in super structure for 230 mm thick wall. NSI Ref CSI No. 6.19 (SOR 23-24)

Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit). NSI Ref CSI No. 6.23 (SOR 23-24)

2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and 3 parts approved 12 mm. graded stone grit and also including liquid water proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer. NSI Ref CSI No. 7.02 (SOR 23-24)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). DSR Code 4.10

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading DSR Code 9.51.2

Fixing of Departmental doors & windows shutters including supply & fixing of hinges and other fixtures.(excluding their supply) including all materials, labour & T&P etc. required for proper completion of work. NSI Ref CSI No. 8.51 (SOR 23-24)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness DSR Code 21.4.1

S/Fixing of single action floor springs ncluding cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. NSI Ref CSI No. 8.53 (SOR 23-24)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR Code 9.21.1

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only DSR Code 9.22.1

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. NSI Ref CSI No. 8.57 (SOR 23-24)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR Code 9.83

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm DSR Code 9.97.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm DSR Code 9.97.3

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm DSR Code 9.100.1

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper DSR Code 9.101.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm DSR Code 9.97.4

Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. NSI Ref CSI No. 8.60 (SOR 23-24)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement ,Door handle, lock and stopper etc and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge NSI Ref CSI No. 8.66 (SOR 23-24)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. DSR Code 10.31

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR Code 10.15.1

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR Code 10.2

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. DSR Code 5.22.1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars DSR Code 5.22A.1

Providing barbed iron wire fencing including fixing in post after straightening it including labour and T&P etc. required for proper completion of the work but excluding supply of posts and wire.(labour rates only) . NSI Ref CSI No. 9.06-A (SOR 23-24)

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. DSR Code 15.36

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat. NSI Ref CSI No. 9.22 (SOR 23-24)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. DSR Code 10.3

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² DSR Code 12.1.3

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. : 0.63 mm thick with zinc coating not less than 275 gm/m² DSR Code 12.4.2

Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature,pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work. NSI Ref CSI No. 10.05 (SOR 23-24)

Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work. NSI Ref CSI No. 10.06 (SOR 23-24)

As in item no 10.06 but applying one coat of approved mastic paint on the bottom and one coat at top of Tar felt. NSI Ref CSI No. 10.07 (SOR 23-24)r]

Supply and painting of 85/25 grade bitumen paint over roof @ 1.7 Kg/ sq.m.and spreading 6 mm.size grit over it @ 1 cft /100 Sq.Ft. including sweeping, cleaning the roof with brush, heating the paint to r

湡⥤䐠剓䌠摯⁥ㄱㄮ㈮ÔĞĈ䬀瑯⁡瑳湯⁥汳扡映潬牯湩⁧癯牥㈠‰浭⠠癡牥条⥥琠楨正戠獡⁥慬摩漠敶⁲湡⁤潪湩整⁤楷桴朠敲⁹散敭瑮猠畬牲⁹業數⁤楷桴瀠杩敭瑮琠慭捴⁨桴⁥桳摡⁥景琠敨猠慬Ɫ椠据畬楤杮爠扵楢杮愠摮瀠汯獩楨杮挠浯汰瑥⁥楷桴戠獡⁥景挠浥湥⁴潭瑲牡ㄠ㨠㐠⠠‱散敭瑮㨠㐠挠慯獲⁥慳摮 ㈺‵浭琠楨正‮䐠剓䌠摯⁥ㄱ㈮⸶ัᘁ鸀ࠁ
牐癯摩湩⁧湡⁤楦楸杮ㄠ‰浭琠楨正愠楣⁤湡⽤牯愠歬污⁩敲楳瑳湡⁴楴敬⁳景愠灰潲敶⁤慭敫愠摮挠汯畯⁲獵湩⁧捡摩愠摮漯⁲污慫楬爠獥獩楴杮洠牯慴⁲敢摤湩Ⱨ愠摮樠楯瑮⁳楦汬摥眠瑩⁨捡摩愠摮漯⁲污慫楬爠獥獩楴杮挠浥湥⁴獡瀠牥䤠⁓›㐴㜵‬潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景䔠杮湩敥⵲湩‭桃牡敧㨮䤠汦潯楲杮漠⁡敢⁤景ㄠ‰浭琠楨正洠牯慴⁲㨱‴ㄨ愠楣⁤牰潯⁦散敭瑮㨠㐠挠慯獲⁥慳摮 䄺楣⁤湡⁤污慫楬爠獥獩慴瑮琠汩⁥卄⁒潃敤ㄠ⸱ㄲㄮㄮƌΉĈ倀潲楶楤杮愠摮氠祡湩⁧慦瑣牯⁹慭敤挠慨晭牥摥攠杤⁥敃敭瑮䌠湯牣瑥⁥慰敶⁲汢捯獫椠潦瑯慰桴‬慰歲ⱳ氠睡獮‬牤癩⁥慷獹漠⁲楬桧⁴牴晡楦⁣慰歲湩⁧瑥Ᵽ漠⁦敲畱物摥猠牴湥瑧ⱨ琠楨正敮獳☠猠穩⽥猠慨数‬慭敤戠⁹慴汢⁥楶牢瑡牯⁹敭桴摯甠楳杮倠⁕潭汵Ɽ氠楡⁤湩爠煥極敲⁤潣潬牵☠瀠瑡整湲漠敶⁲〵浭琠楨正挠浯慰瑣摥戠摥漠⁦猠湡Ɽ挠浯慰瑣湩⁧湡⁤牰灯牥攠扭摥楤杮氯祡湩⁧景椠瑮牥氠捯楫杮瀠癡牥戠潬正⁳湩潴琠敨猠湡⁤敢摤湩⁧慬敹⁲桴潲杵⁨楶牢瑡牯⁹潣灭捡楴湯戠⁹獵湩⁧汰瑡⁥楶牢瑡牯‬楦汬湩⁧桴⁥潪湩獴眠瑩⁨慳摮愠摮挠瑵楴杮漠⁦慰敶⁲汢捯獫愠⁳数⁲敲畱物摥猠穩⁥湡⁤慰瑴牥Ɱ映湩獩楨杮愠摮猠敷灥湩⁧硥牴⁡慳摮‮潣灭敬整愠汬愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥㠠‰浭琠楨正䌠䌮‮慰敶⁲汢捯景䴠㌭‵牧摡⁥楷桴愠灰潲敶⁤潣潬牵搠獥杩湡⁤慰瑴牥⹮†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸶ㄹ㈮͹ƭĈ倀潲楶楤杮愠摮氠祡湩⁧景ㄠ‶浭琠楨正戠牡摯⁡牧敥瑳湯⁥湩映潬牯湩⁧牯猠楫瑲湩Ⱨ景愠灰潲敶⁤桳摡ⱥ挠汯畯Ⱳ楳敺愠摮瀠瑡整湲Ⱐ氠楡⁤癯牥戠獡⁥散敭瑮洠牯慴⁲㨱‴業⁸湩汣摵湩⁧楦楮桳湩⁧桴⁥潪湩獴眠瑩⁨桷瑩⁥散敭瑮†業數⁤楷桴瀠杩敭瑮琠慭捴⁨桴⁥桳摡⁥景朠慲楮整映潬牯椠据畬楤杮挠獯⁴景愠汬洠瑡牥慩ⱬ氠扡畯⁲湡⁤♔⁐敲畱物摥映牯瀠潲数⁲潣灭敬楴湯漠⁦桴⁥潷歲‬獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠据慨杲⹥丠䥓删晥䌠䥓丠⹯ㄠ⸲〳⠠体⁒㌲㈭⤴ƌûĈ倀楡瑮湩⁧楷桴猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥景爠煥極敲⁤潣潬牵琠楧敶愠癥湥猠慨敤㨠睔牯洠牯⁥潣瑡⁳湯渠睥眠牯癯牥愠湵敤⁲潣瑡漠⁦畳瑩扡敬猠慨敤眠瑩⁨牯楤慮祲瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲‮卄⁒潃敤ㄠ⸳㈶ㄮëŸĈ倀楡瑮湩⁧楷桴猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥景爠煥極敲⁤潣潬牵琠楧敶愠癥湥猠慨敤㨠湏⁥牯洠牯⁥潣瑡⁳湯漠摬眠牯卄⁒潃敤ㄠ⸳㤹ㄮÅĈ刀浥癯湩⁧慰湩⁴牯瘠牡楮桳眠瑩⁨慰湩⁴敲潭敶⁲牯眠瑩⁨慣獵楴⁣潳慤椠据畬楤杮猠灵汰⁹景愠汬洠瑡牥慩獬氬扡畯⁲湡⁤♔⁐瑥⹣爠煥極敲⁤潦⁲牰灯牥挠浯汰瑥潩景琠敨眠牯⹫丠䥓删晥䌠䥓丠⹯ㄠ⸳㜰⠠体⁒㌲㈭⤴¤űĈ䐀獩整灭牥湩⁧楷桴ㄠ瑳焠慵楬祴愠牣汹捩搠獩整灭牥⠠敲摡⁹業數⥤栠癡湩⁧佖⁃潣瑮湥⁴敬獳琠慨〵朠慲⽭楬牴ⱥ漠⁦灡牰癯摥洠湡晵捡畴敲⁲湡⁤景爠煥極敲⁤桳摡⁥湡⁤潣潬牵愠汬挠浯汰瑥⁥潴愠档敩敶攠敶桳摡⁥湡⁤潣潬牵㨠丠睥眠牯琨潷漠⁲潭敲挠慯獴 癯牥愠摮椠据畬楤杮眠瑡牥琠楨湮扡敬瀠楲業杮挠慯⁴楷桴挠浥湥⁴牰浩牥栠癡湩⁧佖⁃潣瑮湥⁴敬獳琠慨㔠‰牧浡氯瑩敲‮卄⁒潃敤ㄠ⸳ㄴㄮšǑĈ䐀獩整灭牥湩⁧楷桴ㄠ瑳焠慵楬祴愠牣汹捩搠獩整灭牥⠠敲摡⁹業數⥤栠癡湩⁧佖⁃嘨汯瑡汩⁥牏慧楮⁣潃灭畯摮⤠挠湯整瑮氠獥⁳桴湡㔠‰牧浡 楬牴ⱥ漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲⁲椠据畬楤杮愠灰祬湩⁧摡楤楴湯污挠慯獴眠敨敲敶⁲敲畱物摥琠捡楨癥⁥癥湥猠慨敤愠摮挠汯畯⹲传摬眠牯漨敮漠⁲潭敲挠慯獴 ††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸳ㄸㄮǁ¥Ĉ伀敮挠慯⁴景愠灰潲敶⁤牰獥牥慶楴敶漠敮⁷潷摯眠牯Ⱬ椠据畬楤杮匠灵汰⁹景愠汬氠扡畯Ⱳ洠瑡牥慩湡⁤♔⁐潦⁲牰灯牥挠浯汰瑥潩景眠牯⹫丠䥓删晥䌠䥓丠⹯ㄠ⸳㌱⠠体⁒㌲㈭⤴ƒuĈ䄀⁳湩椠整㌱ㄮ″畢⁴潦⁲癥牥⁹潣瑡愠瑦牥映物瑳挠慯⁴湯瀠敲楶畯汳⁹牴慥整⁤畳晲捡⹥丠䥓删晥䌠䥓丠⹯ㄠ⸳㐱⠠体⁒㌲㈭⤴ThĈ䘀敲据⁨灳物瑩瀠汯獩楨杮㨠睔牯洠牯⁥潣瑡⁳湯渠睥眠牯獫椠据畬楤杮愠挠慯⁴景眠潯⁤楦汬牥䐠剓䌠摯⁥㌱㘮⸸圱ᘀ䤀ࠀ
牆湥档猠楰楲⁴潰楬桳湩⁧›湏⁥牯洠牯⁥潣瑡⁳湯漠摬眠牯卄⁒潃敤ㄠ⸳〱⸳㠱ᘀ瀀ࠀ
潐楬桳湩⁧湯眠潯⁤潷歲眠瑩⁨敲摡⁹業數⁤慷⁸潰楬桳漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲㨠丠睥眠牯卄⁒潃敤ㄠ⸳㤶ㄮ`oĈ倀汯獩楨杮漠潷摯眠牯楷桴爠慥祤洠摡⁥慷⁸潰楬桳漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲㨠汏⁤潷歲䐠剓䌠摯⁥㌱ㄮ㐰ㄮ^ŲĈ倀潲楶楤杮愠摮愠灰祬湩⁧桷瑩⁥散敭瑮戠獡摥瀠瑵祴漠⁦癡牥条⁥桴捩湫獥⁳‱浭‬景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵牥‬癯牥琠敨瀠慬瑳牥摥眠污畳晲捡⁥潴瀠敲慰敲琠敨猠牵慦散攠敶湡⁤浳潯桴挠浯汰瑥⹥††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䐠剓䌠摯⁥㌱㠮搰ᘁ㄀ࠁ
硅牴⁡潦⁲牰癯摩湩⁧湡⁤業楸杮眠瑡牥瀠潲景湩⁧慭整楲污椠散敭瑮瀠慬瑳牥眠牯湩瀠潲潰瑲潩敲潣浭湥敤⁤祢琠敨洠湡晵捡畴敲獲⸮††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䐠剓䌠摯⁥㌱㈮⌱ᘁ਀ࠂ
灁汰楹杮䈠剉䅌倠呕奔漠⁲煥極慶敬瑮瀠瑵祴漠牰癥潩獵污⁹楢慬瀠瑵祴猠潭瑯敨畳晲捡⁥癯牥漠敮挠獯⁴景眠瑡牥戠獡⁥散敭瑮瀠楲敭⁲景䤠䥃漠⁲煥極慶敬瑮戠慲摮映牯猠潭瑯楨楮杮愠摮氠癥汥湩⁧景琠敨猠牵慦散愠⁳数⁲敲畱物浥湥⁴湡⁤楤敲瑣潩景䔠䤯椠据畬楤杮挠獯⁴景愠汬洠瑡牥慩‬慬潢牵愠摮吠倦爠煥極敲⁤潦⁲牰灯牥挠浯汰瑥潩景眠牯⹫††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††丠䥓删晥䌠䥓丠⹯ㄠ⸳ㄲ⠠体⁒㌲㈭⤴ǩƭĈ圀污慰湩楴杮眠瑩⁨捡祲楬⁣浥汵楳湯瀠楡瑮‬慨楶杮嘠䍏⠠潖慬楴敬传杲湡捩䌠浯潰湵⁤ 潣瑮湥⁴敬獳琠慨〵朠慲獭 楬牴ⱥ漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲‬湩汣摵湩⁧灡汰楹杮愠摤瑩潩慮潣瑡⁳桷牥癥牥爠煥極敲Ɽ琠捡楨癥⁥癥湥猠慨敤愠摮挠汯畯⹲传敮挠慯⁴†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸳㈸ㄮƝƭĈ圀污慰湩楴杮眠瑩⁨捡祲楬⁣浥汵楳湯瀠楡瑮‬慨楶杮嘠䍏⠠潖慬楴敬传杲湡捩䌠浯潰湵⁤ 潣瑮湥⁴敬獳琠慨〵朠慲獭 楬牴ⱥ漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲‬湩汣摵湩⁧灡汰楹杮愠摤瑩潩慮潣瑡⁳桷牥癥牥爠煥極敲Ɽ琠捡楨癥⁥癥湥猠慨敤愠摮挠汯畯⹲吠潷挠慯⁴†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸳㈸㈮ƝľĈ匀浡⁥獡椠瑩浥ㄠ⸳㈲戠瑵映牯攠捡⁨潣瑡漠⁦䄠䕐⁘牯攠畱癩污湥⁴牢湡⁤敷瑡敨⁲潣瑡瀠楡瑮⸠湯瀠敲楶畯汳⁹牴慥整⁤畳晲捡⹥†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††华⁉敒⁦千⁉潎‮㌱㈮‴匨剏㈠ⴳ㐲ᴩᘁ＀ࠁ
慐湩楴杮漠敮挠慯⁴楷桴䄠䕐⁘牯攠畱癩污湥⁴牢湡⁤敷瑡敨⁲潣瑡瀠楡瑮漠敮⁷慷汬猠牵慦散⁳眨汥牰灥牡摥眠瑩⁨楂汲⁡異瑴⁹湡⁤湯⁥潣瑡漠⁦牰浩牥䤠䥃漠⁲煥極慶敬瑮眠楨档猠慨汬戠⁥慰摩猠灥牡瑡汥⥹椠据畬楤杮琠牨畯桧眠獡楨杮眠瑩⁨慷整⁲湩汣摵湩⁧潣瑳漠⁦污慭整楲污ⱳ氠扡畯Ⱳ吠倦爠煥極敲⁤潦⁲牰灯牥挠浯汰瑥潩景眠牯⹫††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††华⁉敒⁦千⁉潎‮㌱㈮′匨剏㈠ⴳ㐲ᘁ㄀ࠁ
慓敭愠⁳湩椠整潮ㄠ⸳㈲愠潢敶戠瑵映牯攠敶祲挠慯⁴景愠摤瑩潩慮偁塅漠⁲煥極慶敬瑮戠慲摮眠慥桴牥挠慯⁴慰湩⹴††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††华⁉敒⁦千⁉潎‮㌱㈮″匨剏㈠ⴳ㐲ဩᘁ倀ࠁ
楆楮桳湩⁧慷汬⁳楷桴䄠牣汹捩匠潭瑯⁨硥整楲牯瀠楡瑮漠⁦敲畱物摥猠慨敤㨠传摬眠牯吨潷漠⁲潭敲挠慯⁴灡汰敩⁤⁀⸱㜶氠牴 〱猠浱 湯攠楸瑳湩⁧散敭瑮瀠楡瑮猠牵慦散‮†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䐠剓䌠摯⁥㌱ㄮㄱㄮĿĮĈ䘀湩獩楨杮眠污獬眠瑩⁨捁祲楬⁣浓潯桴攠瑸牥潩⁲慰湩⁴景爠煥極敲⁤桳摡⁥›汏⁤潷歲⠠湏⁥牯洠牯⁥潣瑡愠灰楬摥䀠〠㤮‰瑬⽲〱猠浱⸩††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤

13.111.2
‡

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In mud mortar DSR Code 15.7.1x
‰

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar DSR Code 15.7.4z
Ì
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR Code 15.3¿ê
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Code 15.2.1ÛîDismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. NSI Ref CSI No. 15.05 (SOR 23-24)ÍÔÕ–
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet DSR Code 15.28.1†×
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below DSR Code 15.12.1ÇÔ
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres DSR Code 15.12.2ĵ
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR Code 15.56§L

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR Code 13.88>
™
Dismantling of dry B.O.E. Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead. NSI Ref No. CSI No. 15.16 (SOR 23-24)t´
Dismantling and re-laying of dry B.O.E. floor including cost of all labour and T&P required for proper completion of work.(labour rates only) NSI Ref No. CSI No. 15.18 (SOR 23-24)
Drilling bore from G.L. to 90 M B.G.L., work to be completed as per direction of Engineer I/C. for 150 mm dia. boring. NSI Ref CSI No. 19.04-H-i (SOR 23-24) wè
Lowering of tube well assembly alongwith shrouding with pea gravels, testing, verticality of Tube well and washing of the tube well from G.L. to 180 Meter B.G.L. the cost including all labour, materials, T&P required for proper completion of work but excluding the cost of slotted pipe/ plain M.S/PVC.pipe assembly and Pea gravel. (i) from GL to 90 M BGL. NSI Ref CSI No. 19.05 (SOR 23-24)ÇÀ

Providing 110mm dia Plain PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, incl

挠獯⁴景愠汬氠扡畯Ⱳ洠瑡牥慩獬愠摮吠倦爠煥極敲⁤潦⁲獡敳扭祬洠歡湩⁧湡⁤牰灯牥挠浯汰瑥潩景眠牯⹫†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††华⁉敒⁦千⁉潎‮㤱〮‸匨剏㈠ⴳ㐲鼩ᘁᰀࠁ
牐癯摩湩⁧ㄱ洰楤⁡汓瑯整⁤噐⁃䅃䥓䝎倠偉卅⠠牁浯⁡匯灵敲敭 倨敲獳牵ㅥ‰杋⼮匠捱⹭ 潦⁲慭楫杮琠扵睥汥獡敳扭祬愠摮挠牡慴敧琠潢楲杮猠瑩ⱥ椠据畬楤杮挠獯⁴景愠汬氠扡畯Ⱳ洠瑡牥慩獬愠摮吠倦爠煥極敲⁤潦⁲獡敳扭祬洠歡湩⁧湡⁤牰灯牥挠浯汰瑥潩景眠牯⹫丠䥓删晥䌠䥓丠⹯ㄠ⸹〱⠠体⁒㌲㈭⤴ûƺĈ䐀癥汥灯敭瑮漠⁦畴敢敷汬戠⁹⹏⹐唠楮⁴㔨䠠⁐潴ㄠ‰偈猠扵敭獲扩敬瀠浵⁰敳⥴‬湩汣摵湩⁧牢湩楧杮䌠汯浵楰数映牯琠敨传⁐湵瑩‬獡敳扭楬杮‬汥捥牴捩挠湯敮瑣潩獮‬畲湮湩⁧潦⁲敲畱物摥瀠牥潩Ɽ搠獩敭瑮楬杮愠摮琠歡湩⁧畯⁴…慣牲楹杮愠慷⁹湡⁤汣慥楮杮琠敨猠瑩⁥楷桴挠獯⁴景愠汬氠扡畯Ⱳ洠瑡牥慩獬‬♔⁐湡⁤畦汥⼠䔠敬瑣楲楣祴䌠慨杲獥攠捴爠煥極敲⁤潦⁲牰灯牥挠浯汰瑥潩景眠牯湡⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮华⁉敒⁦千⁉潎‮㤱ㄮ‴匨剏㈠ⴳ㐲餩ᘁ谀ࠀ
畓灰祬愠摮映硩湩⁧景倠䍖琠灯瀠畬⁧景栠慥祶焠慵楬祴†湩汣摵湩⁧污慬潢牵洠瑡牥慩…♔⹐†⥢ㄱ‰浭搠慩‮丠䥓删晥䌠䥓丠⹯ㄠ⸹〲䈭⠠体⁒㌲㈭⤴iŹĈ吀慲獮潰瑲瑡潩湡⁤湩瑳污慬楴湯漠⁦畴敢眠汥牤汩楬杮删杩洠振‬潣灭敲獳牵⁥潦⁲敤敶潬浰湥⁴湡⁤瑯敨⁲敲畱物摥攠畱灩敭瑮⁳湡⁤捡散獳牯敩⁳瑡猠瑩⁥景眠牯湡⁤楤浳湥汴楬杮☠琠歡湩⁧桴浥戠捡晡整⁲畳捣獥晳汵挠浯汰瑥潩景琠敨眠牯湩汣摵湩⁧汣慥楮杮‬敬敶汬湩⁧‭牤獥楳杮琠敨猠瑩⁥牰灯牥祬‬污潳搠獩潰楳杮漠晦琠敨猠牵汰獵攠牡桴‬楳瑬‬慳摮攠捴‮丠䥓删晥䌠䥓丠⹯ㄠ⸹㠲⠠体⁒㌲㈭⤴ŘëĈ匀灵汰⁹湡⁤湩瑳污慬楴湯漠⁦⸰‵偈䬠物潬歳牡漠⁲煥極慶敬瑮洠歡⁥栠牯穩湯慴ⱬ猠汥⁦牰浩湩Ⱨ猠湩汧⁥桰獡⁥洬湯扯潬正琠汵畬瀠浵⁰湩汣摵湩⁧潣瑳漠⁦慬潢牵‬♔⁐湡⁤慭整楲污爠煥極敲⁤潦⁲潣灭敬楴湯漠⁦潷歲‮丠䥓删晥䌠䥓丠⹯ㄠ⸹〳⠠体⁒㌲㈭⤴ÊèĈ匀灵汰⁹…湩瑳污慬楴湯漠⁦汥捥牴捩污挠湯牴汯瀠湡汥漠⁦♌⁔ 慈敶汬⁳牯攠畱癩污湥⁴慭敫映牯猠扵敭獲扩敬瀠浵⁰ 異灭敳⁴潣瑮楡楮杮挠湯牴捡潴⁲敲慬⁹潣摮湥敳⹲⥢映牯ㄠ㔮 ′⹈⁐異灭猠瑥猠湩汧⁥桰獡⁥†华⁉敒⁦千⁉潎‮㤱㌮ⴱ⁢匨剏㈠ⴳ㐲씩ᘀ였ࠀ
畓灰祬愠摮映硩湩⁧景猠扵敭獲扩敬挠扡敬䠠癡汥⁳漠⁲煥極慶敬瑮洠歡ⱥ映牯猠扵敭獲扩敬瀠浵⁰潣灭敬整椠污敲灳捥⹴⠠⥢㈠㔮洠㉭映牯瀠浵⁰愠潢敶ㄠ䠠⁐湡⁤灵琠″偈‮丨䥓删晥䌠䥓丠⹯ㄠ⸹㌳戭⠠体⁒㌲㈭⤴ ©Ĉ匀灵汰⁹…楦楸杮漠⁦瑳敥楷敲爠灯⁥潦⁲猠扵敭獲扩敬瀠浵⁰湩汣摵湩⁧潣瑳漠⁦慬潢牵‬♔⁐湡⁤慭整楲污爠煥極敲⁤潦⁲潣灭敬楴湯漠⁦潷歲⸮†丠䥓删晥䌠䥓丠⹯ㄠ⸹㐳⠠体⁒㌲㈭⤴‡ȈĈ刀灥楡獲琠汰獡整⁲景琠楨正敮獳ㄠ′浭琠〲洠湩瀠瑡档獥漠⁦牡慥㈠㔮猠⹱敭整獲愠摮甠摮牥‬湩汣摵湩⁧畣瑴湩⁧桴⁥慰捴⁨湩瀠潲数⁲桳灡ⱥ爠歡湩⁧畯⁴潪湩獴愠摮瀠敲慰楲杮愠摮瀠慬瑳牥湩⁧桴⁥畳晲捡⁥景琠敨眠污獬挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥†楗桴挠浥湥⁴潭瑲牡ㄠ㐺⠠挱浥湥㩴㐠挠慯獲⁥慳摮 ††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸴⸱爐ᘁ쬀ࠁ
牐癯摩湩⁧…楦楸杮朠慬獳瀠湡獥眠瑩⁨異瑴⁹湡⁤汧穡湩⁧汣灩⁳湩猠整汥搠潯獲‬楷摮睯ⱳ挠敬敲瑳牯⁹楷摮睯ⱳ愠汬挠浯汰瑥⁥楷桴㨠㐠〮洠桴捩汧獡⁳慰敮⁳††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䐠剓䌠摯⁥〱㌮⸰묱ᘁࠁ
敒敮楷杮朠慬獳瀠湡獥‬楷桴瀠瑵祴愠摮渠楡獬眠敨敲敶⁲敮散獳牡⁹湩汣摵湩⁧慲正湩⁧畯⁴桴⁥汯⁤異瑴㩹䘠潬瑡朠慬獳瀠湡獥漠⁦潮業慮桴捩湫獥⁳‴浭⠠敷杩瑨渠瑯氠獥⁳桴湡ㄠ欰⽧煳⥭†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䐠剓䌠摯⁥㐱㔮ㄮǑ=Ĉ刀晥硩湩⁧汯⁤汧獡⁳慰敮⁳楷桴瀠瑵祴愠摮渠楡獬‮卄⁒潃敤ㄠ⸴〱.·Ĉ䌀敬湡湩⁧慰敮⁳景朠慬獳眠瑩⁨灳物瑩漠⁦慣獵楴⁣潳慤椠据畬楤杮猠灵汰⁹景愠汬洠瑡牥慩獬氬扡畯⁲湡⁤♔⁐瑥⹣敲畱物摥映牯瀠潲数⁲

ompletion of the work.. NSI Ref CSI No. 20.09 (SOR 23-24)–é
Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. NSI Ref CSI No. 20.12 (SOR 23-24)È;

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR Code 15.60-
Ò

Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. L drops 16 mm dia x 300 long. NSI Ref. CSI No. 20.17 (a) (SOR 23-24)¬
§

Same as item No. 20.17 (a) above but for (b) Tower bolts 10 mm dia x 250 mm long. NSI Ref. CSI No. 20.17 (b) (SOR 23-24)
ª

Same as item No. 20.17 (a) above but for (d) Iron hinges 100 mm size.12 gauge.thick. NSI Ref. CSI No. 20.17 (d) (SOR 23-24)„
›

Same as item No. 20.17 (a) above but for (f) M.S.handles 100 mm size. NSI Ref. CSI No. 20.17 (f) (SOR 23-24)u
Q
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). DSR Code 14.75AB
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. DSR Code 14.82«
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR Code 15.23.1ݎ

Leveling and dressing of land by cutting filling and upto 150 mm. depth complete with all labour, T&P etc. required for proper completion of the work. NSI Ref. CSI No. 20.18 (SOR 23-24)Ç
†

Extraction of defective VT submersible pumps and motor with 60" x 90" column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut-out fuse and operation of Tube well for 24 hours fo rits smooth working with all cost of materials,labour and T&P etc required for the proper completion of the work. NSI Ref. CSI No. 20.28 (SOR 23-24)d
¼

Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge. NSI Ref. CSI No. 20.29 (SOR 23-24)š
á

Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. Job attending by one no. Plumber/welder/mason/carpenter with one no. helper per hour or part of an hour. NSI Ref. CSI No. 22.18 (SOR 23-24)¿
~

Supply and sprinkling of lime in all drains of colony and water logged area including cost of all labour,materials,and T&P etc, as required for proper completion of the work. NSI Ref. CSI No. 22.19 (SOR 23-24)\
d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore DSR Code 18.10.1T
d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore DSR Code 18.10.2T
d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore DSR Code 18.10.3T
d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 32 mm dia nominal bore DSR Code 18.10.4T
d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 40 mm dia nominal bore DSR Code 18.10.5T

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. DSR Code 14.77 –

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm DSR Code 14.80.2†
Ö
Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020. NSI Ref CSI No. 20.19 (SOR 23-24)µ©
S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge. NSI Ref CSI No. 20.21 (SOR 23-24)ˆÐ
Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete NSI Ref CSI No. 20.27 (SOR 23-24)¯Ž
Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge. NSI Ref CSI No. 20.29 (SOR 23-24)mÛ

Making water connection of GI pipe line with GI Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work. NSI Ref CSI No. 26.03 (SOR 23-24)º
t

Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.05 (a) (SOR 23-24)N
t

Providing & fixing half turn 20mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.05 (b) (SOR 23-24)N
•

Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.06 (a) (SOR 23-24)o
Ð
Providing and fixing NON RETURN REFLEX VALVE, 100 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.07 (i) (SOR 23-24)ª{
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore DSR Code 18.21.2.1iT

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore DSR Code 18.46.1D
±

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore DSR Code 18.47.1¡
T

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore DSR Code 18.46.2D
±

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore DSR Code 18.47.2¡


Providing and fixing brass bib cock of approved quality : 15 mm nominal bore DSR Code 18.15.1õ9

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms DSR Code 18.54.1)
:

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms DSR Code 18.54.2*


Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR Code 18.49.1
N

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DSR Code 18.50.1>
L

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore DSR Code 18.51.1<
2

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms DSR Code 18.55.1"
5

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore DSR Code 18.18.1%
ú
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore DSR Code 18.16.1ê

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal DSR Code 18.19.1.1


Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter DSR Code 18.22.1üˆ

Providing and fixing CP BRASS SHOWER HEAVY QUALITY ( > 225 gms) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref CSI No. 26.16-e (SOR 23-24)e
›

Providing and fixing CP BRASS wash basin mixer HEAVY QUALITY ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.16 (f) (SOR 23-24)u
–

Providing and fixing CP BRASS wall mixer HEAVY QUALITY( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.16 (g) (SOR 23-24)p
D

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore DSR Code 18.53.14
•

Providing and fixing CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. ) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. NSI Ref. CSI No. 26.16 (j) (SOR 23-24)o
@

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore DSR Code 18.52.10
Ÿ

Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. NSI Ref. CSI No. 26.17 (SOR 23-24)}
ô
Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. NSI Ref. CSI No. 26.18 (SOR 23-24)Ñ¿

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 15 mm nominal dia Pipes DSR Code 18.7.1°
 
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes DSR Code 18.8.1¿

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 20 mm nominal dia Pipes DSR Code 18.7.2°
 
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes DSR Code 18.8.2¿

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes DSR Code 18.7.3°
 
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes DSR Code 18.8.3¿

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes DSR Code 18.7.4°
 
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes DSR Code 18.8.4¿

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC sol

per bag of 50kg cement used

per bag of 50kg cement used in the mix

Litre

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR Code 18.48

Per Day

Per Day