Jhansi Division: Development of Sheopur kalan Railway station Under Amrit Bharat Station Scheme including construction of FOB

A- IR USSOR 2021 ITEMS (FOB work) Directory - NCR-HQ-IRUSSOR-2019-

B- CPWD DSR Items (Building work) 278063139.19 Below/P

Item Breakup - A- IR USSOR 2021 ITEMS (FOB work) Directory - NCR-HQ-IRUSSOR-2019-1- Ver-2)

Conducting SCPT for soil as per IS:4968 Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines.

All kinds of soils Providing and laying in position Plain cement concrete of specified Nominal M i x f o r miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level : JHANSI DIVISION-GATI SHAKTI/NORTH CENTRAL RLY

1:1½:3 (1 Cement: 1½ coarse sand cum (zone-III) : 3 graded stone aggregate 20 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand (zone-III) cum : 6 graded stone aggregate 20 mm nominal size) Supply and using Cement at Worksite

Ordinary Portland Cement approved brands/makes Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars of Kg grade Fe-500D or more of approved brands/makes. Supplying, fabrication, assembling of all types of steel girders of specified spans with structural steel conforming to Quality "B0" Grade Designation E250 conforming to IS:2062, erection / slewing / end launching of steel girders with cranes or any other approved launching methods as per site conditions (not requiring traffic block) on sub-structure including provision of trolley refuges etc., complete as per approved Q A P and drawings conforming to IRS-B1-2001 and other relevant codes and specifications. Note: 1. Detailed fabrication and erection drawings & launching methodology will be prepared by the contractor and got approved from Railway. 2. The rate is all inclusive including launching in position, complete in all respect except cost of (i) Painting / Metalising; (ii) Bearings & (iii) HSFG bolts which shall be paid extra under relevant item. 3. The payment shall be made on the theoretical weight of main components and gusset plates only. 4. Payment Schedule: (i) Receipt of material at site: 40% (ii) Fabrication of girders: 20% (iii) Erection/Launching: 20% (iv) Completion in all respects: 20%

Plate Girder/Composite Girder (Steel Work)

Supplying and fixing HSFG bolts of any Kg dia and any length with suitable nuts including DTI washers conforming to IRS- B1-2001 for bridges and steel structures with contractors labour, tools and plants and lead and lift etc., complete. Metallizing of steel work of girders with sprayed aluminium after surface preparation by Sand/grit blasting, followed by one coat of etch primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under Clause 39 of IRS-B1-2001. Note: Nominal Thickness of sprayed Aluminium coating shall be 150 microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns. JHANSI DIVISION-GATI SHAKTI/NORTH CENTRAL RLY

On new girder during fabrication Providing and fixing various size HTS holding down bolts conforming to relevant Codes/Specification in concrete column or in other structures with proper nuts, bolts, washers/plates, grouting of holes with cement or epoxy concrete with all material, labour, T&P as a complete job.

With epoxy concrete grouting. Painting of cleaned plate/composite bridge girders including all scaffolding along with provision of Jhoola / hanging scaffolding ladders etc. where required.

With two coats of Aluminium paint in Sqm dual containers conforming to IS:2339 with DFT of 15 - 20 Microns for each coat.

Supplying welded and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in-charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. Total 61917374.02

Item Breakup - B- CPWD DSR Items (Building work)

Item Breakup - C- Horticulture SOR

specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.30 Providing and Displaying Foxtail palm Each 82 1183.9 97079.8 well developed with fresh & healthy 17 foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 5.40 Providing and Displaying Topiary of Ficus Each 80 1127.5 90200 Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 18 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge. 8.0 SHRUBS 8.14 Providing and stacking of Chandni dwarf Each 142 35 4970 of height 15-20 cm., well branched in 19 earthen pots of size 20 cm as per direction of the officer-in-charge. 8.23 Providing and stacking of Ficus blackii Each 140 250 35000 (F.vivion) (bushy) of height 150-165 cm. 20 with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 8.32 Providing and stacking of Hamelia patens Each 140 50 7000 of height 60-75 cm. with 6-8 branches in 21 poly bags of size 25 cm as per direction of the officer-in-charge. 8.36 Providing and stacking of Hibiscus Each 130 45 5850 rosasinensis of height 60-75 cm. with 5-6 22 branches in p.bag of size 25 cm as per direction of the officer-in-charge. 8.49 Providing and stacking of Nerium Each 130 30 3900 oleander (kaner) of height 45-60 cm. 23 with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in- charge. 8.68 Providing and stacking of Tecoma Each 130 50 6500 gaudichaudi of height 60-75 cm. with 5- 24 6 branches in p.bag of size 25 cm as per direction of the officer-in-charge. Total 2148078.70

Item Breakup - F-DSR items (FOB work)