REPAIR TO FENCING, POSTS, FLOORS, HARD-STANDING, DRAINS, CULVERTS, SWTs AND OTHER CONNECTED B/R WORKS AT AIR FORCE STATION UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) as in ground floor & paving n exc 15cm thick below or above ground level complete all as specified and as directed.

Demolition of concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 , 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1, 50mm thick (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and as directed.

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1 1:2:4(20mm graded aggregate) Set in CM1: 4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and ponted complete all as specified and as directed by Engineer-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade withgrey cement and pigment complete all as specified and as directed

M&L for except Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade withgrey cement and pigment complete all as specified and as directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with topping of cement mixed with grey cement and pigment complete all as specified and as directed

M&L for except Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with topping of cement mixed with grey cement and pigment complete all as specified and as directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and as directed

M&L for sand cushioning 50mm thick under floor or in foundation including watering and consolidation, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25mm thickness as in floor for laying tiles, complete all as specified and as directed.

M&L for Outdoor Floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

M&L for except Outdoor Floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

M&L for coloured Chequered cement concrete tiles of size 20cm x 20cm x 25 mm/30mmx30mmx25mm thick (with grey cement and colour pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

M&L for preparation of concrete surfaces and applying one coat of concrete floor paints on new/old surfaces over a coat of primer complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in lintels up to 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm in height, copings kneelers, apex stones and mass concrete incl necessary form work, complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete complete all as specified and as directed.

Excavation in post holes( or similar holes) each n exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil,complete all as specified and as directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete, complete all as specified and as directed.

Mild steel work for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for Mild steel round bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending for tieing of chain link fencing of Gd.I, IS-432 (Part-I), complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

M&L for Preparation of new steel iron surfaces of any descripotion over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed.

S&F in repairs galvanised. 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails , including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Demolition of brick work, stone/boulder masonry built in cement mortarcomplete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m radius in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for Preparing of newly plastered surfaces of walls and applying two coat of cement base paint in camouflage pattern over a coat of cement base primer, complete all as specified and as directed.

Dewatering the static water tank completely and cleaning of static water tank from bottom, wall by steel wire brush including removal of all vegetation, mud & leaves etc of capacity 15000 gallons, complete all as specified and as directed.

Dewatering the static water tank completely and cleaning of static water tank from bottom, wall by steel wire brush including removal of all vegetation, mud & leaves etc of capacity 25000 gallons, complete all as specified and as directed.

S&F in repair Welded steel wire fabric (weight n exc 4.00 Kg per sqm metre) fixed to wood or steel members, complete all as specified and as directed.

M&L for preparation of old surfaces of existing wall surfaces and applying two coats of white wash on wall surfaces of static water tank, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel works of any description not otherwise provided for, complete all as specified and as directed.

S&F rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W (Gde E 250 quality A) complete all as specified and as directed.

Erection fixing only rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W (Gde E 250 quality A) complete all as specified and as directed.

Dismantling plain or corrugated steel sheets, asbestos cement (corrugated, semi corrugated) etc sheets and any type or any description of roof covering, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coatingn GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel 0.50mm thick of any colour having tensile strength of 550mm as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Demolition of reinforced(reinforcement cut as required to facilitate demolition) cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and mass complete all as specified and directed.

Formwork for rough finished surfaces of concrete (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

S/F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

S/F mild steel bars TMT 08 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match(over 10mm thick screed bed in CM 1:4) the shade of the slab including rubbing and polishing complete

M&L for mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed.

S&F Providing precast cement concrete (Type B0 1:2:4, 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4, including all mouldings but excluding frame) complete all as specified and directed.

S&F Plastic dividing strips 1.5mm thick,40mm wide and inserted in position, conform to design complete all as specified and directed.

S&F in repairs boarding of hardwood 2nd class 30mm thickness in existing floors in patches and skirting including cutting out, piecing, heading joints etc planed one side, with butt joints and fixed with screws at any height (Approx. 30-35M) complete all as specified and directed.

DAVINDER SINGH

ANIKET TRADERS

TARUN BUILDERS

PARAS RAM ASGOTRA AND SONS

APARANA ENTERPRISES