SPECIAL REPAIRS TO BUILDING NO P- 44 UNDER GE(W) COLABA, MUMBAI

Amount

Dismantling Plain or corrugated steel sheeting, of any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Dismantling of battens for tiles, shingles of any size including tilting fillets not exc 15 cm cross sectional area all as specified and directed.

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints of 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints of 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any hieght all as specified and directed.

M&L pre-painted roof tiles of metal sheet of Mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) all as specified and directed.

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness shall be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and directed. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness shall be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities including all as specified and as directed. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness shall be measured excluding plaster)

Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia all as specified and as directed. (Note : - Length of reinforcement bars cleaned of rust all around shall be measured for payment.)

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

M&L MS TMT bars of any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed

M&L plastering 18-20 mm thick (Average) ready-mix polymer modified cement mortar in two coats, 15 mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and as directedby Engr-in-Charge. Make Dr fixit repair Pro-Polymer mortar, FOSROC- RENDOROC S2- structural grade polymer mortar or equivalent in STP . Note : - Ready to use bags will be used for the above item and no extra cost wiil be claimed by the contractor

M&L for providing and placing in position micro-concrete, grade M-40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

M&L RCC work as in columns, beams, slabs, chajja, railing in M-20 (Design Mix) using 20 mm graded nominal size crushed stone aggregate all as specified and directed.

M&L mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

Use & waste special water tight centering and shuttering including bolting, strutting, propping so as to withstand a pressure of 0.1 Mpa including removal of form work of all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and directed.

Demolition of brick work including all quoins, arches, pillars but excluding ashlar facings built in cement mortar all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados laid, bedded and pointed in any mortar and removal of rubbish off the site ouside of MD land all as specified & directed.

M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises outside MD land all as specified and directed.

M&L 1200 x 600 vetrified ceramic coloured tiles light shade 10 mm thick (square/ rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make: Kajaria Gres Tough / Nitco /Johnson

All as per item No 25 above but in vertical surfaces

M&L Screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes all as specified and directed.

M&L HI-Gloss digital ceramic tiles in vertical surfaces tiles of size 600mm x 1200mm x8 to10 thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufacture instruction.

M&L non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but nexc 0.36 Sqm. in floors laid over 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes all as specified and directed. Make:- Somnay/Kajaria or equivalent make.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

M&L providing and fixing 10 mm thick plaster of paris in ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long for any sunk or raised moulding all as specified & directed.

M&L GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.)

Taking down cement plaster of any description from brick wall surfaces including racking out joints and hacking for key, scrubbing down with water all as specified and directed.

M&L 15mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Ambuja, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto 05 storeys of bldgs) including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Supply only integral waterproofing compound all as specified and directed.

Cleaning the internal surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface imperfections, protrusions, loose concrete & filling of cracks using SBR latex modified Mortar in the ratio Cement: Sand (1:4) and 5% by weight of cement all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3 mm thick (average) wall putty all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3 mm thick (average) wall putty all as specified and directed.

M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc primer all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer all as specified and directed. .

M&L for providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 literes per linear metre including drilling and plugging holes in apron all as specified and directed.

M&L for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor all as specified and directed.

M&L providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

S&F in repairs 15 mm dia bore fancy type chromium plated 2 way angle valve with flange bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed. Make Kerovit Cat Part No - KB1311033 /Kohler.

S&F in repairs chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws all as specified and directed. Make Kerovit Cat Part No - KA 930003 /Kohler

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

S&F in repairs wall mixture 3 -in-1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower) all as specified and directed. Make Kerovit Cat Part No -KB1511019 /Kohler

S&F in repairs brass chromium plated towel rack with 3 hooks 18" (Oval Range) all as specified and directed. Make Kerovit Cat Part No - KA 980011 /Kohler

S&F in repairs chromium plated towel rings fixed with screws all as specified and directed. Make Kerovit Cat Part No -KA 670005 /Kohler

S&F in repairs corner glass shelf 200 mm (brass brackets) all as specified and directed. Make Kerovit Cat Part No - KA920009 /Kohler

S&F in repairs brass chromium plated shower rose 300 mm of size with arm and with or without swivel joints to steel pipe or union all as specified and as directed Make :Kerovit cat part no- KA570006 for shower and Cat Part KA940002 for shower Arms/Kohler

S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed. Make Kerovit Cat Part No - KB2111003 /Kohler

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply all as specified and directed. Make Prayag Cat part No BCT-04/Polytuf or equalent make.

S&F in repairs wash hand basin table top of size 460x345x130 mm vitrous China including, waste coupling & PVC waste pipe of 32 mm dia all as specified and directed. Make Kerovit cat part No - YORKSHIRE - KO2085 /Kohler

S&F in repairs brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin all as specified and directed. Make Kerovit Cat Part No - KB411002/Kohler

S&F in repairs mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs all as specified and directed. Make : Prayag. Cat Part No 554 or equalent make.

M&L in repairs single piece WC with PP thin rim seat cover white, fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings all as specified and directed. Make Kerovit ROBB's - KS712/Kohler

S&F toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified and directed. Make Kerovit Cat Part No- KA 980009 or Kohler

S&F in repairs chromime plated, cast copper alloy jet spray with 1 metre SS chrome plated hose and hook (for European seat) all as specified and directed. Make Kerovit Cat part No - KA580009/Kohler

S&F in repairs stainless steel peg set of six suitable size of length all as specified and directed. Make Prayag Cat No BEA 30/ Equalent make.

S&F in repair 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.

S&F in repair 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 15 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 20 mm dia bore all as specified and directed

S&F GI tubing 15 mm bore medium grade galvanised with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm all as specified and directed.

Cutting chases, pinning in and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels and cutting chases for concealed water tubing or concealed conduit wiring and making good, cutting not exc 10 cm girth all as specified and directed.

Demolition and breaking up drain pipes of dia 100 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up drain pipes of dia 75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

S&F PVC (SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC (SWR) bends suitable for 110 mm external dia all as specified and directed.

S&F PVC (SWR) bends suitable for 75 mm external dia all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore all as specified and directed.

Dismantling water tanks and removing to store all as specified and directed.

Fixing only Plastic water tank of capacity 2000 ltrs all as specified and directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) area exc 1.50 but n exc. 4.00 Sqm each all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) area n exc 1.50 Sqm each all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 50 mm size, applying PVC solvent all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction with particle bord core and plywood face panels, commercial type on both side and providing both side is covered with deco rative face veneer with lipping/ frame to match all as specified and as didrected.

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed. Make for Item No. 88 to 91- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F powder coated/anodised aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Joints between wall and window shall be filled with Silicon of approved colour. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square area exc 0.5 sqm in each pane frosted on one side all as specified and directed.

M&L 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares area n exc 0.5 sq. m in each pan all as specified and directed.

M&L in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staplee (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts all as specified and directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

M&L 150 mm long Brass handles, cast type, polished bright all as specified and directed.

M&L french polishing on old wooden surfaces of any description, width or girth exc 10 cm including cleaning and preparing the surfaces, with two or more coats all as specified and directed.

S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed. sample as approved by GE. Make- Kitply, Century Plywood, Archidply, Green Ply, Anchor

S&F 4 mm thick veneered designer sheet fixed with adhesive as per manufactrue instructions to plywood work all as specified and directed : sample as approved by GE. Make- Novapan, Eco Board Industries Pune, Kitply, Anchorlam, Century Plywood

S&F decorative fillets of Ist class hard wood, secured with nails or beads, sectional area exc 3 Sqcm but not exc 6 Sqcm all as specified and directed. sample as approved by GE

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as hold fasts,end of posts, backs of chowkhats, area tarred n. exc. 0.1 sq m each and treated with tar or coal tar black paint all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 150 mm cast type anodised all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.

M&L for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volts grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, cassing capping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

All as per Srl item No. 109 here in before but for one bell point controled by one bell push .

All as per Srl item No.109 here in before but for socket outlet point 5 Amp on same board.

All as per Srl item No.109 here in before but for socket outlet point 5 Amp on Independent board.

All as per serial item No 109 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed.

S&F modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

S&F modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Cona, Plaza, Anchor .

S&F modular sockets 6A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate all as specified and directed.

S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Cona, Plaza, Anchor, Vinay

S&F modular bell push 1way 6 A, module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F in repairs Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand.

S&F modular fan step/ electronic regulator, 120W - 2 module A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona, Plaza, Anchor .

S&F LED lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed.

S&F Wall bracket decorative light warm white /white type with lamp 12 Watt with necessary connection all as specified and directed.

S&F LED Mirror Light warm white /white type with lamp 12 Watt complete with necessary connection all as specified and directed.

S&F spot light fitting warm white /white type with lamp 12 Watt complete with necessary connection all as specified and directed.

S&F foot light fitting warm white /white type with lamp 3Watt complete with necessary connection all as specified and directed.

S&F down lighter fitting warm white /white type with lamp 12 Watt complete with necessary connection all as specified and directed.

S&F Exhaust fan 230 volts, 250mm, plastic body including making all electric connection all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed.

M&L for refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and removing fan and blades to store all as specified and directed.

S&F LED security Building light LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all as specified and directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

S&F MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's all as specified and directed.

S&F in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link with MCCB 100 Amp 4P 10 KA all enclosed in standard sheet flush mounting all as specified and directed. Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable.

S&F in repairs MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts all as specified and directed.

M&L in repairs for Sub main wiring, with two runs of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Panel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures complete all as specified & as directed by engr-in-charge Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC Cassing cappiing shall be measured as one length.

M&L in repairs Sub main wiring with two run of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all as specified and directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC Cassing cappiing shall be measured as one RM.

M&L in repairs Sub main wiring with two run of single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing cappiing ISI marked with all accessories such as Tees, elbows, junction boxes as required fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all as specified and directed. Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC Cassing cappiing shall be measured as one RM.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes, LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs of size 16 Sq.mm 4 core , confirming to IS specifications all as specified and directed.

Excavation in trenches nexc 1.5 mtr wide and nexc 1.5 mtr deep for foundation, laying GI pipes and UG cables and n exc 10 sqmtr on plan and getting out in hard/dense soil all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as specified and directed. Note: for the purpose of payment only punned thickness will be measured.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point in soil all as specified and directed.

M&L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable all as specified and directed.

Supply and laying/fixing GI Tubing 40 mm dia light grade under road, on pole floor and on wall for cable protection all as specified and directed.

Supply & laying 15 mm bore galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level & connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I.

Mayur Enterprises

Bright Construction Co

Shetty Construction Co

SHREE JAGDISH FURNITURE CO.

Idustrial products India

Vandan Enterprises

Bidder Name

Unitech Enterprises

Shetty Construction Co

Mayur Enterprises

Vandan Enterprises

Idustrial products India

Bright Construction Co

SHREE JAGDISH FURNITURE CO.