Repair and maintenance of Shilpayan Building for Shifting and Accommodation of the CCnPR Department, CCL, Ranchi.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Ref CCL SOR 2025 13.91)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Ref CCL SOR 2025 13.80)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.(Ref CCL SOR 2025 13.85.3)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats(Ref CCL SOR 2025 13.82.2)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6(1 cement : 6 coarse sand)(Ref CCL SOR 2025 6.4.2)

12 mm cement plaster of mix:1:6(1 cement: 6 fine sand)(Ref CCL SOR 2025 13.1.2)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres(Ref CCL SOR 2025 15.12.2)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood(Ref CCL SOR 2025 9.1.2)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Ref CCL SOR 2025 9.21.2)