REPAIR MAINT OF INTERNAL ELECTRIFICATION FOR SUBMAIN WIRING, MCBs, DBs, EARTHING AND SERVICE CONNECTION OF BUILDING AND MISC WORKS OF ALL UNITS AT KARU SHESHARTHANG REPAIR MAINT OF BLDG LED LIGHTS FITTINGS AND FIXTURES WITH CONNECTED WITH CONNE

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Description all as per items No. 2.00 One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch.

Description all as per items No. 2.00 One light point controlled by two nos, 2-way, 5 Amps switch.

Description all as per items No. 2.00 One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

Description all as per items No. 6.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F, in repalcement, of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F, in repalcement, of Switch Socket combination, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F, in repalcement, of Switch Socket Combination, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F, in repalcement, of Switch piano type, single pole, two way, 5 amps, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F, in replacement of Bell push, flush type 5 amps, 230 volts. Make : Cona / Havells (Rio)/ SSK

S&F in replacement of electric call bell ding dong AC 230 volts Single Pole. Make : Anchor / Havells / Crompton

S&F, in repalcement, of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F LED lamp 9/10W complete all as specified and directed by the Engineer-in-Charge. Make : Havells / Crompton / Philips

S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F, in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Havells / CG / Wipro / Philips

S&F, in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of wall mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 10W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. Make : Havells (Venza) / Philips / Crompton

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light 6500 K complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

S & F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. Make : Havells/ Khaitan/ Crompton

Description as per srl item no. 25.00 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

Description as per srl item no. 25.00 here-in-before but with 2 run of 10.0 sq mm FRLS copper wire with 10.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Schneider Elect / Legrand / C&S / Hager

Description all as per item No 28.00 here in before but SPN 12 way Distibution Board

Description all as per item No 28.00 here in before but SPN 8 way Distibution Board

Description all as per item No 28.00 here in before but SPN 4 way Distibution Board

S&F in replacement of MCB, C Curve type, 10 kA, 63 Amp, TPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / Hager

S&F in replacement of MCB, C Curve type, 10 kA, 20 to 40 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / Hager

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / Hager

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / Hager

S&F, in replacement of Blanking plate of plastic, suitable for distribution board complete all as directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

S&F in replacement of UNSV 20w LED 6500K decorative slim round profile LED lightning with extruded polycarbonate, environment friendly energy efficient ready to use. Make : Havells / CG/Philips

S&F in replacement of UNSV 10W LED 6500K decorative slim round profile LED lightning with extruded polycarbonate, environment friendly energy efficient ready to use. Havells / CG/Philips

S&F in replacement of UNSV 36 watt 6500 K LED 2' x 2' Recessedled edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications all as specified and directed by Engr-in-Charge. Havells / CG/Philips

S&F in replacement of UNSV 36 watt 4000 K LED 2' x 2' Recessedled edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications all as specified and directed by Engr-in-Charge. Havells / CG/Philips

S&F in replacement of UNSV invertor Led Bulb 9W 6500 K of 04 hrs backup suitable for holder all as specified and directed by Engr-in-Charge. Havells / CG/Philips

S&F in replacement of UNSV Led Bulb 9W 6500 K of suitable for holder all as specified and directed by Engr-in-Charge. Make: Havells / CG/Philips

S&F in replacement of UNSV Inverter LED batten 20 W LED 6500 K with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. Make : Havells / CG/Philips

Taking out old submain wiring from exisiting conduit pipe of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Description all as per item No 46.00 here-in-before but with 2 run of 4.0 sq mm FRLS copper wire with 4.0 Sqmm FRLS copper cable as earth wire.

Description all as per item No 46.00 here-in-before but with 2 run of 6.0 sq mm FRLS copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

Description all as per item No 46.00 here-in-before but with 2 run of 10.0 sq mm FRLS copper wire with 10.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Schneider Elect / Legrand / C&S / Hager

Description all as per item No 50.00 here in before but SPN 12 way Distibution Board

Description all as per item No 50.00 here in before but SPN 8 way Distibution Board

Description all as per item No 50.00 here in before but SPN 4 way Distibution Board

Description all as per item No 50.00 here in before but SPN 2 way Distibution Board (Single Door)

S&F in replacement of MCB, C Curve type, 10 kA, 100 Amp, TPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / Hager

S&F in replacement of MCB, C Curve type, 10 kA, 63 Amp, TPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / L&T

S&F in replacement of MCB, C Curve type, 10 kA, 32 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / L&T

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / L&T

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / C&S / L&T

S&F, in replacement of Blanking plate of plastic, suitable for distribution board complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanised earth lead wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to Panels all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning, in replacement, Junction box , cubical type, factory made, outdoor type of Size 45cm(l)x30cm(w)x60cm(h) , dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, complete with openable shutters in front and rear having proper locking arrangement including including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC and aluminium bus bar of size 400 Amps capacity , Three phase and neutral bus bar , making hot and cold drilling holes to aluminium bus bar . Junction box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :- (a) MCCB 4 pole, 160 Amps,240/415 Volt, 50Hz, 10 KA= 01 Nos (I/C). (b) MCB SPN 63 Amps, 240 Volts - 04 Nos (O/G). Note : Unit rate quoted by the contractor here-in-before also includes for fixing and connecting of MCBs and installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Description all as per item No. 64.00 here-in-before but with 16 Sqmm 2.0 Core

Description all as per item No. 64.00 here-in-before but with 10 Sqmm 2.0 Core

Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.

Laying only old reinforced PCC cable cover of any size as retrieved from serial item No- 04 above, complete all as directed by Engineer-in-Charge.

M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in hard / dense soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide and getting out including trimming of sides, for laying of cables & foundation of poles, stay assembly, complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to under ground cable complete all as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified.

S&F of GI pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Please Enable Macros to View BoQ information