373/W/EDC-I/SRE/2023-24

Amount

Detail of Work

Repairing of Tripping Mechanisum system including replacement of tripping & Operating Coil And Relay.

Providing and fixing of charging gerari & non retun bearing

Replacement of Jack and Lever Brass Bush

Water level Earthing with connected 6 swg copper with funnel

Replacement of Operating /Charging Motor

Servicing of All machenical Parts.

Providing and fixing of Damage nut bolt proper.

Rebinding of 2.5x2 core 4 core 6 core sq mm PVC copper wire, lugs and damage burnt wiring and servising wiring re wiring of control pannel

Safely Carriage of 25 KVA T/F from ESC, SRE to Site of work including loading & unloading at both ends.

Safely carriage of Line Material (Except PCC Pole/Weasel conductor)ESC SRE to site of works through privet vehicle including loading and unloading at both ends. (Distance 0 to 25 K.M.)

Safe installation of 25 KVA T/F on the D/P with complete fittings including making connections and commissioning.

Safely carriage of AB Cable size 3x95 from ESC SRE to site of work including loading and unloading at both ends.

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Laying, lifting, stringing, sagging jump ring & binding of AB cable size 3x95 sq.mm

Earthing Rod

Providing of Suspenstion Clamp

Providing of PRC Clamp

Providing of I hook

Providing of Dead & Clamp

Safely carriage of Fuse set from ESC SRE to site of work including loading and unloading at both ends.

Safely Installation of Fuse set and making connection properly

Removal of Control cable scrap from site of work to ESC SRE to including loading and unloading at both ends.

Safely removal of 33 KV VCB, Control Pannel from site of work to ESC Sre including loading and unloading at both ends.

Safely Carriage of 33 KV Control pannel for Single T/F from ESC SRE to Site of work including loading and unloading at both ends.

Safely Installation of 33 KV Control Pannel for Single T/F and making connection properly.

Laying of Control Cable size 4x2.5 sq.mm

Laying of Control Cable size 2x2.5 sq.mm

Safely carriage of 33 KV VCB from ESC SRE to site of work including loading and loading at both ends.

Safely Installation of 33 KV VCB and making connection properly to C&R pannel through Control cable.

Laying, lifting, Stringing, sagging jumpring & binding of Dog Conductor for 33 KV Line as per RESPO specification including complete.

water level Earthing of VCB (1 No body & 1 No. neutral earthing) by boring of till water level minimum 60 Ft deep & fixing of G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 50x6 mm and copper strip at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Safely removal of 33 KV old & damge CT from site of work to ESC Sre including loading and unloading at both ends.

Safely carriage of 33 KV CT from ESC SRE to site of work including loading and unloading at both ends.

Safely installation of 33 KV CT properly and making connection to C&R Pannel.

Providing of Lug

SAINI ASSOCIATES