Civil Work

Amount

Dismantling , removing and carefully stacking Brick/stone in clay walls under 3m high etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the existing partition including removal of frames,hinges and fastenings with necessary tools and labour as per site conditions and cleared away from the site as directed, etc complete complying with standard specifications and directed by the departmental officers.

Dismantling GYPBoard false ceiling including removal of frames,hinges and fastenings with necessary tools and labour as per site conditions and cleared away from the site as directed, etc complete complying with standard specifications and directed by the departmental officers.

Partitions : Supply and Installation of drywall Partition with layers of Tufbloc, square edge, Magnesia cement core panels of size 1200x2400x12mm, volume density 1000kgs/m3, weight 12kg/m2, installed on using exsiting Auminimum channel. Tufbloc 1200X2400X12mm is fastened onto the exsiting Aluminimum Channel behind in staggered manner using self drilling (drill tip) fasteners at 300mm centers. 4mm gap should be maintained between boards on all sides. Another layer of Tufbloc 1200X2400X12mm is fastened onto the first layer of Tufbloc 12mm in staggered manner. 4mm gap should be maintained between boards on all sides. Repeat the process similarly on the other side of the framework to partition system. 4mm gap between Tufbloc boards to be filled in full depth by using Seam kit / Jointing Compound as per given recommendations and guidelines the system is back lined with synth pf 10x50mm .Technical Parameters Fire (Class) – 1 & P, Acoustics - STC 43, Thermal conductivity (W/mk)– 0.118, Climate (°C, RH) – 50, 95, Light reflectance (%) – Paint dependant ,Green (VoC, RC %) – Low, 30

Acoustical Wall panels : Stage wall, side walls and rear walls upto 1.2 mtr height Supply & installation of wall panels Salon Slats Surco made of pinewood E1 grade fiberboard, melamine laminated finish, groove perforated slats L16-2 - (2mm grooves @16mm pitch with 27% open area), backlined with Soundtexblack acoustical fleece of 0.27mm thick, surface density 63g/m2,rear scoring with perf 10mm at 20mm pitch, tongue-groove edge for a seamless look, flame resistant (BS476 part 7) , of size 128 x2440x16mm, volume density of base board 700Kg/m3, weight 9Kg/m2 (L16), installed by using GI Strut framework system.The GI Strut framework system shall include Strut CC25, fully knurled, sectional thickness 0.45mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastened to the wall positioned horizontally or vertically at every 600mm centres . The Strut CC18,aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC25 with the help of fasteners at every 400mm centers Slats Surco Lite of size 128x 2440x16mm in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. The system is backlined with SynthPF 5x25 adhered on wall with dab spots of Anutone stick S7 adhesive. Technical Parameters Fire (Class) – BS476 part 7 , Acoustics – NRC 0.75, Thermal conductivity (W/mk)– na, Climate (°C, RH) – 50, 70, Light reflectance (%) – 75 (Maple Arce),Green (VOC, RC %) – E1, 25

Acoustical Wall panels : side wall and rear wall Upper Reaches above 1.2 mtr upto false ceiling Supply and installation of Acoustic wall fabric stretch system by using FR Grade fabric of size 1400mm width, shall be stretched by using CC 25 with infill of synth pf 5X25 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 15mm (FS15) and Midseam 15mm (FS15), strand board, synth PF infill with requisite accessories & tools. CC 25 mm is first installed on the wall along with ithe marking lines with metal fasteners inserted at 300mm centers . FS15 tracks to be installed on wooden base, after applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. the Strand3 Fibre square edge magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 4kg which is fixed to wall with suitable fasteners. Synth PF 5x25mm thick adhered on strand panel by using Stick 7 adhesive.Fabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm. Technical parameters : Core - pinewoodfibre & polyfibre, Fire – 1, Acoustics – NRC 0.90, Climate (OC RH) – 49, 90, Termite resistance – Yes, Light reflectance – Colour dependent, Green (RC %) – 25, Hygiene (VoC, Clean room) – Low,Class 1

FALSE CEILING : Supply and Installation of Strand Nubby, square edge, magnesite-bonded,2mm wide pinewood fibre core,fully encapsulated with texture finish,Green Pro certified ceiling tile of size 595x595x15mm thk having volume density 400Kgs/m3, weight 6kg/m2 suspended using 0.3mm thick Anutone Skelet Trelis T15 metal grid system.Anutone Skelet Trelis T15 ceiling grid system, of 600x600mm module includes Anutone Skelet WA15W30 with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centres.Then suspend the Anutone Skelet MT15W36 with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of Anchor Bolt, Soffit Cleat and Suspension Rod with Levelling Clip at 1200mm centres. Anutone Skelet CT15W12 with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centres in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 in direction parallel to the Main T15 to result in 600x600mm module. Anutone Strand Nubby panels of size 595x595x15mm thk shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade.Technical Parameters Fire (Class) – 1 & P Acoustics – NRC upto 0.9 (For E600 Mounting) Thermal conductivity (W/mk)– 0.07 Climate (°C, RH) – 50, 95 Light reflectance (%) – 85 Green (VoC, RC %) – Low, 30

Renewing the damaged false ceiling with new 2 square PVC Laminated GYP sum board GYPTYEX False ceiling in the true horizontal level false ceiling grid using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in baned poly system paint wall angle of size 3000x24mmx24mm using in periphery of the ceiling fixed to the wall partition RC columns band walls with the held of screws of 60mm main runner of size 24x35x3000mm suspended at a 1200mm c/c by using 24x14mm angles hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x26x1200mm to be inter locked between in main runner at 600mm c/c mark to form a grid of 600x600mm long cross tee of size 24x26x600mm fixed in between 1200mm long cross tee for forming a grid of 600mmx600mm finally laying high quality viny film with back side aluminium foil PVC laminated gypsum ceiling tiles regular of size 595x595x7.50mm to 8mm thick of noise reduction co-efficient NRC of 01-03 relative humidity 95% density of 780kg.m3 and light refection 0.75 etc., complete.

Border Ceiling : Supplying and fabricatiing erecting and fixing Hilux or equvalent board false ceiling upto a ceiling height of 4.5m from floor level with 8mm thick hi LIC board and GI metal chanel of size 45X15X0.9mm forming a grid of 120 X60cm and anchored to the ceiling with dasg fasteners of 12.50mm dia 40mm long 6mm dia bolt and nut to the hanger of 25X25X5 of required lenth the other end of the angle fixed with bolt and nut to GI chanel . the GI frame work will be covered with 8mm thick hilux board of approved quality conforming as per direction engineer in charge. Finally finishing with putty and painting

Providing and fixing stage for class room with wooden platform made of 50x50mm thick wooden frame work fixed at 600mm c/c in both ways and 225mm wooden leg is used to rise the false floor which is supported at 600c/c , 3 layer of 1000 gsm density 50mm synth infilled inside framework fixed on wooden platform with including 25mm thick plywood fixed on the top of frame work-and , all necessary screws, adhesives and other hardwares complete.

Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm) , 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops,2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush,1 - no door closer,1mm thick best quality lamination sheet etc.,,complete complying with standard specification and as directed by the departmental officers - Single leaf

Sofa Three Seater Providing sofa with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with resin cloth or leather ride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,

Sofa Two Seater Providing sofa with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with resin cloth or leatherride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying Teapoy of Size 3X1½ Teakwood with Melamine polish with Glass Top. The rate includes labour for manufacturing, supply, transportation, etc.,

Clearing the surface thoroughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsequantly wash with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plastes and cured cement mass will be removed tto multi proof acrylic co ploymer with cement and fine and mix in the ratio 1:2:4 (one of cement two of river sand four of aggregate ) to fill of proof acrylic co polymer mix with cement ratio 1:2 coats over night setting the cure with water apply weather tuff sealter coat polymer membrance two coats mixed with water in the ratio 8:2 etc complete complying with standard specification and as directed by the departmental officers at site of work.

Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 - 10 cu.m.

Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for oundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as

eighth floor

Paving the floor with Vitrified non-skid tiles matt finish of size 600mmx600mm approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 8mm thick and pointed with white cement mixed with coloring pigment at the rate of 0.40 Kg. / Esq... curing, etc., complete complying with standard specification and as directed by the departmental officers. (The kajaria/somany make and brand of the tiles should be got approved by Executive Engineer before use on works

Paving the floor with Vitrified matt finish of size 1200mmx600mm approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 8mm thick and pointed with white cement mixed with coloring pigment at the rate of 0.40 Kg. / Esq... curing, etc., complete complying with standard specification and as directed by the departmental officers. (The kajaria/somany make and brand of the tiles should be got approved by Executive Engineer before use on works

Dadooing walls with 1200mmx600mm best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (The kajaria/somany make and brand of the tiles should be got approved by Executive Engineer before use on works

Supplying and fixing in position best quality and approved make Indian made white / colour glazed jaquar wash hand basin of size 450x450mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position white glazed European water closet of jaquare of best approved quality and approval make with 100mm T or S trap connecting with PVC pipe of 110mm dia double slapped rigid PVC seat cover with CP brass hinges including cost of white cement for packing, spun yarn, TW plugs, brass screws etc., including supplying and fixing 10litres capacity PVC level flushing tank with a pair of CI brackets, etc. Complete with internal fittings such as 50mm Brass ball valve with polythene float, brass handle, union coupling connected by means of 40mm white PVC using Indian adopter joint including all internal fittings such as 50mm brass connection, 50mm Parryware angle cock, 50mm brass nipple 2nos, 50mm nylon connection TW plugs, screws and also connection to PVC pipe including cost of 110mm dia PVC pipe dismantling masonry and redoing the same to original condition etc., Complete complying with standard specification and as directed by the departmental officers

Supplying and fixing box type mirror of size 600x450x5.5mm thick of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work

Supplying and fixing jaquar standard towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm dia

PVC Elbow

PVC Elbow with Door

PVC Tee

PVC Bend

75mm dia

PVC Elbow

PVC Elbow with Door

PVC Tee

PVC Bend

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

20mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110mm dia

75mm dia

Renewing and fixing Angle Cock with new one of approved quality Metro or Equal Brand and approved make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unservicewable Health faucit with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing of wood polymer composite (WPC) door with solid door frames extruded with size 75mmx50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55 and bulk density 750kg/cub.Mt. The frame shall be fixed to the wall using 10x10mm long MS screw throught the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door Shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of specified Design which is approved by engineering-in-charge. Both side of the shutter shall have rough sugar texture finish, laminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 750kg/cub.Mt moulding the thickness remains 25mm (+/-1mm) etc. complete as per the direction of the departmental officers.

Supplying and fixing of MS frame 75x75x2mm for acoustical door support etc complete complying with std specification and directed by departmental officers

Supply and installation of 25mm T shape teak wood beeding fixed on slats and fabric panels jointing area and L. shape corner beeding fixing on the column area slats joints. Finally finishing with melamine polish as per direction engineer in charge

Renewing and fixing Vertical Blind premium with absolute blackout lining cloth, using white heavy duty metal brackets, and 2mm durable silver chain for pulling up and down, the vertical blind with child safety clip both sides and also a blind smooth action, Blind clutch is attached in the side with smooth going easy fit blind pivot brackets along with screws, the rate are inclusive of labour and fixing etc., complete complying with standard specification and as directed by departmental officers

GST at 18%

AKSHAYA ENTERPRISES (BID ID -1432874)