Loading
Loading…
Loading…
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
25 Feb 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
Clause Regarding GST: (a) All the Bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure are as per GST LAW.(b) Tenderer Should Furnish their GSTIN numbers representing the States in Which they are registered GST, along with address of Registered Office.(c)The Contract is under GST Act and rules as applicable time to time.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
36 conditions · 8 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Augmentation of Sports Facilities in Tinsukia Division.
LV-T-14-TSK-932
LV-T-14-TSK-932
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹31,000
25 Feb 2026
3 Feb 2026
11 Feb 2026
32 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,30,624 | ||
| — | 8.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of 70W LED Flood Light Pressure Dia cast AL housing with Heat Sink, IP 66 , System Efficacy100 lm/W , Impact Protection: IK07 with Short circuit , reverse Polarity Protection, Surge Protection: +/-4KV, THD<10%, operation on 220 240 V/AC, 50Hz to be installed with necessary arrangement as per direction of Engineer-Incharge ar Site. | — | — | — | 56,000 | |
| — | 1.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of 12 way Double Door SPN MCB DB with IP-43 protection, Door earthing,Neutral Bar,earth bar and bus bar provided with the following MCBS:- (i)40 Amps 2 Pole RCCB Conforms to IEC 61009 breaking capacity 10kA, Sesitivity(In)=100mA = 1 No, (ii)MCB DP 32 Amps C series 10KA BC=2 Nos (iii)MCB SP 16 Amps C series 10KA BC=8 Nos | — | — | — | 10,150 | |
| — | 360.00 | — | — | ||
| Supply, drawing and connection of single core 4.0 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 20,412 | |
| — | 360.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 13,968 | |
| — | 250.00 | — | — | ||
| Supply, laying and testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 16 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024. | — | — | — | 1,41,250 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of 200 Amp, 4-way copper busbar chamber suitable for 415 V, 3-phase + neutral, 50 Hz system, having tinned electrolytic copper busbars of size 25 mm x 6 mm with current density not exceeding 1.2 A/mm², short-circuit withstand capacity of 25 kA for 1 second, insulated on DMC/epoxy supports, enclosed in IP-65/IP-66 rated FRP / powder-coated CRCA steel enclosure with separate neutral and earth busbars, suitable for incoming cable up to 95 Sq.mm aluminium / 70 Sq.mm copper, wall-mounted on MS/FRP mounting brackets with minimum four anchor fasteners (M10) fixed into RCC/masonry using approved chemical/mechanical anchors, maintaining minimum 300 mm ground clearance and proper alignment, complete with cable glands, terminations, earthing and all accessories as per IS/IEC 61439 and IS 8623. | — | — | — | 29,050 | |
| — | 2.00 | — | — | ||
| Erection of earth by 50 mm dia 3 Mtrs. long (3.6 mm thickness) GI pipe , 6 SWG GI wire,GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with RCC cover slab 12.7 mm thickness and watering pipe per Drawing No PCEE/ELG/DRG/2024/1 Dtd 30.09.2024 | — | — | — | 8,708 | |
| — | 6.00 | — | — | ||
| Supply , fitting, fixing of LED streetlight 45 W made up of pressure die cast alluminium alloy housing(heat sink) with empered protective toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, Operating voltage range: 140-270V ,Lumen efficacy of LED 100 lm/W with PC lens to ensure better uniformity of light distribution powered by integral, isolated electronic LED driver should be as per IEC: 62384/IS:16104 (SMPS based constant current supply) with THD<20%, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/ Sec 13. Power factor=0.95 , color temperature=5700 K ,LED Should be as per LM- 80/IS:16105 for Street Light Near Staff Quarters. The fiiitngs should be installed in locations with necessary arrangement as per direction of Engineer-Incharge at site.The street light fittings should be warranted for 5 years | — | — | — | 28,320 | |
| — | 6.00 | — | — | ||
| "a) Supply and erection of Single Arm type Hot Dip Galvanized in single deep to average 65 micron DFT 6 mtr. long octagonal pole with sectional dia 130x70 mm, overall sectional thickness 3 mm complete with base plate size 220x220x12 mm, 4 Nos. 600 mm long foundation bolt of 20 mm dia with all other accessories as per direction of Engineer in charge at site. b) Supply and erection of PCC/RCC/shallow foundation of size and depth as per recommendation and drawing of the manufacturer (approx. 1.6 mtr.x 0.6 mtr.x0.6 mtr.) with excavation of earth for foundation of all depth and all places, nature and condition of soil including de-watering, shoring, shuttering, batching, mixing, placing, leveling, carrying etc and re-filling the pit after completion of foundation work from excavated earth or borrowed pit by contractor's own arrangement for octagonal poles. Drawing of foundation details, loading, sectional plan bar bonding schedule etc. should be submitted before execution to get the approval from Rly. competent authority. " | — | — | — | 1,22,766 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentTSK-932.pdf Tender Document
ATTACHMENT
AnexxuresSectionVIINew.pdf
ATTACHMENT
TenderDocumentTSK-932.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .