Interior Fit-Out Works in The Office Space of IREDA, Block-2, Plate-B, 7th Floor, Commercial Complex, East Kidwai Nagar, New Delhi.

ABSTRACT OF COST

S.NO. DESCRIPTION Cost of DSR Items Cost of Non DSR Items

3.00 SANITARY / PLUMBING WORKS ₹ 1,22,062.90 ₹ 6,73,941.00

6.00 WI-FI & LAN WORKS Passive Work ₹ 20,13,525.00 ₹ 16,30,655.00

7.00 Active Component for Data, Wifi ₹ 0.00 ₹ 54,49,000.00

15.00 GAS SUPPRESSION SYSTEM ₹ 0.00 ₹ 3,89,824.00

Grand Total ₹ 14,71,38,829.00

Grand Total ₹ 14,71,38,829.00

1 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work

upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 100 Cum 6326.05 632605.00

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of

1.02 MR cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with

white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete

as specified and as directed by the Engineer-in-Charge.

MR 18 mm thick Italian Marble stone slab, SATVARIO 1100 Sqm 6095.00 6704500.00

ENGINEERED WOODEN FLOORING Providing and fixing of 14mmm thick engineered Panel 1096-2200x130-207 mm Total

thickness 14 mm Numbers of panels with top layer of 3mm oak with cross edge click installation system and consist of

surfance layer OAK , middle and bottom layer -pine. One raw of strips , country grade and finish surface layer of -5 layers of

1.03 M.R. acrylic semi matt lacquer V hardended ( 3 layers of primer lacquer-layers of UV hardened surfacde ceramic lacquer )2. cross 490 Sqm 7621.00 3734290.00

edge -click system, transverse lock insert-HDF average hardness 37Mpa, Dimensional characteristics- consistent with standrd

Providing & fixing of PANELS in patented round hole profile of size 146mm x 25mm x 3000mm(Min). IFS Terra DECKING are

hybrid composites with a wood plastic composite core made of 65% wood fiber, 30% High Density Polyethylene and 5%

Additives and 360 degree capping of high performance polymer compound for high UV resistance and vibrant aesthetics

1.04 MR produced using co extrusion process.The Cladding panels should adhere to accelerated weather testing as per ASTM 290 Sqm 5590.45 1621230.95

G154:2016,Cycle-1, Density of 1.3g/cum & tensile strength >22Mpa . The panel should be compatible with no visible screw

installation system using Novel Terra Powder coated Steel Clips.

Providing and fixing made in India Glass mosaic tiles at Floor & finished plain wall surface of size 20 mm x 20 mm x 4 mm in

all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the

1.05 MR wall surface with the help of approved Adhesive AD HOC (2,7 kg) + Epoxy coloured grout FILLGEL PLUS UVR (3 kg) applied 80 Sqm 6921.34 553707.18

at the rate per sqm. The rate is inclusive of all operation, material and required pattern

Supplying, installation, testing and commissioning of rubber flooring, 20mm thick with box preparation, adhesive, installation,

1.06 MR suitable for gymnasium flooring complete in all respects 60 Sqm 2734.29 164057.53

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick

1.07 11.41 cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with

white cement and matching pigments etc., complete.

Providing and fixing removable raised/false access flooring with systemand its components of approved make for different

plenum height with possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I.

1.08 DSR 11.54 rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as 20 Sqm 5407.15 108143.00

directed by Engineer-in-charge consisting of:

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and

25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal

tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI

Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the

required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved

make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes

at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability

in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide

adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance

between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as

specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination

of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform

pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot

welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy

coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland

cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High

Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within

0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the

centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per

the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the

11.54.2 450 mm Finished Floor Height (FFH).

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm.

1.09 MR Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. 250 Rmt 286.45 71612.04

Providing and Fixing Lam Parke, Elegance Laminate Flooring Size 1195mm x 1545mm x 12mm, AC5 Class 33, Abrasion

Classes, average abrasian Value > 6000, use in Heavy Traffic, 6 plank per pkg, 1.3551 sq.mtr./box, total weight per box 14.60

kgs , Heavy traffic use , Fast and Easy Assembly, Resistant to UV rays , Environmentally Friendly, Resistantto Furniture wheel

1.1 MR Abrasion, High Density Fiberboard, Maintained And Hygenic, Resistant to Point Strikes, Not Affected by Stains, REsistant to 215 Sqm 359.77 77351.37

Scratch, Bfl-S1

TOTAL FLOORING WORKS 773310.00 13034892.06

2 FALSE CEILING WORKS

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with

2.01 12.45 intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230

mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge

but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

BAFFLE CEILING : Providing & Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm

Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and

length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be

150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color

2.02 MR with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 160 Sqm 6900.00 1103999.20

mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are

fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to

suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

OPEN CELL The Ceiling suspension system shall be exposed Lay-in system to fit 600mm x 600mm ceiling module. Cell size

will be 100 mm x 100 mm. It shall be suspended to the soffit by 4mm diameter adjustable quick fit hanger rod system. Main tee

shall be 32mm height exposed portion shall (Polyster Coated) be 15mm. Cross tees shall be 26 mm height and exposed

portion is 15mm.All system components are made of roll formed hot dipped galvanized steel of 0.50mm thickness with a

2.03 MR minimum tensile strength of 240 mpa.Both ends of main tee have integral splices which can be enjoyed firmly be inserting a 600 Sqm 4029.48 2417685.32

tab on the one end of one section into slot in the adjoining section. Open cell ceiling system is consisting of 60 microns

powder coating of polyester paint. Main and cross runners of open cell interlock with each other and comes in dimension of

595 mm x 595 mm, which lay-in the frame of 15 mm tee grid .

DINOC FILM : Providing and fixing DINOC Film(fine wood,texture,leather finish), a flexible cast PVC with comply adhesive

intended to cover all type of the surfaces such as wall covering, fixture, ceiling, doors, interior applications. The substrate can

be be gypsum board, ply wood, MDF board, Aluminium, Stainless Steel, Mortar (with sealer coating). The thickness of the film

2.04 MR is approx. 215 microns (film/adhesives), cadmium free. The self adhesive would be permanent acrylic adhesive with comply 75 Sqm 7342.00 550649.72

performance and a liner of PE coated kraft paper. The installation is to be done on a smooth, dust free putty surface that has

a coat of oil based premier.

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

STRETCHED FABRIC CEILING : Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed

fabric coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width

of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform

with blanq color and light transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN.

The fire rating should be accordance to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic

substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French decree no. 2011- 321,

Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10- year

manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room

temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush

finish of tapered and square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric

Wall/ False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient

lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be atleast 73 -80mm with beam angle of

170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/

PCB should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated

.The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to

6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black

2.06 MR paint having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier 85 Sqm 5537.00 470644.67

splices maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS

steel sheet. The edge profile G.I.shall be matching with the panel.

CUSTOMISED PERFORATED MESH FASLE CEILING : Supply & Install: Loop Type 2 system formed as an open metal

ceiling with an open area of more than 50% and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-

dimensional visual effect and hides the insight into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP

interlock both the long and front side joint with a non magnetic suspension, the elements are installed with a circumferential 1

mm joint, thus compensating tolerances in x and y direction. The non-magnetic suspension system effectuates a self-

alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm GMS is perforated with 60mm deep drawn holes

.The substructure consists of a form perforated L profile [U1040] as a lateral grid which is suspended from the ceiling with

nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid profiles are to be

connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile

is according to the requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles are bolted on by

means of C channel hanger bracket with M6 bolts. Only construction parts approved by the manufacturer may be used.

Provide necessary supports, provisions as per the architects Instructions. Tolerances according to TAIM, DIN EN 13964 and

quality controlled to ISO 9001:2008 approved by TUV.Finish of ceiling is in RAL 9016 white/ RAL 9006 Silver grey powder

coated with minimum 60 microns paint thickness.

TOTAL FALSE CEILING WORKS 1375140.00 6011203.53

3 WALL FINISHES WORKS

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Supply and installation of Aluminium Framed Glass Partitionfor Access and Cabin System for minimal frame, room dividing

solutions.Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural

anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with

acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both

sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a

3.01 MR stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction 325 Sqm 5401.00 1755324.82

and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free

view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one

side. Optional Profile Bottom Seal pair for additional accoustic. Glass thickness - 10( LSG).shall be included in the product.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

3.02 9.1 with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 2 Cum 131576.95 263153.90

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board

construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross

3.03 9.21 bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 46 Sqm 2015.75 92724.50

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all

3.04 9.23 area of door shutter to be measured). 46 Sqm 401.40 18464.40

Providing and Fixing ESDH 1236-22X922 mm Dtype Handle for wooden doors Material : Stainless Steel. Finish : Satin

3.05 MR Stainless Steel (SSS). of approved make and model all complete as per the direction of Engineer-in-charge. 45 Each 8549.10 384709.45

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden doors of approved

3.06 MR make and model all complete as per the direction of Engineer-in-charge. 45 Each 895.62 40302.79

Providing and Fixing FH-943 Double cylender Floor Spring- for wooden door with Closing Force EN 3 with Maximum door

weight 105 Kg. Maximum door width 950mm.Closing speed : 130° Final closing speed : 15-0°. Hold Open (standard): 90° hold

3.07 MR open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years Warranty against manufacturing defect. CE 19 Each 8956.20 170167.72

certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing and Fixing ESDH 1236-22X922 mm Dtype Handle for wooden doors Material : Stainless Steel.Finish : Satin

3.08 MR Stainless Steel (SSS). of approved make and model all complete as per the direction of Engineer-in-charge. 19 Each 8549.10 162432.84

Providing and Fixing EFS ACC-001,002 top and Bottom Strap for wooden doors of approved make and model all complete as

per the direction of Engineer-in-charge.

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole for wooden doors of approved make and model all

complete as per the direction of Engineer-in-charge.

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and Fixing ECY 1060- 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing FHHS 3100 (EN 1154) - Double cylender Floor Spring with Top-Bottom Patch,pivot and Bottom Patch

Lock Maximum door weight 100 Kg. Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold

Open (standard): 90° hold open.Suitable for 10-12 mm glass

3.12 MR Weight of floor spring approx : 6kg 45 Each 9990.00 449549.92

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and fixing 10 mm thick frameless toughened glass door shutter of approved brand and manufacture, including

providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary

3.13 21.18 holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper 108 Sqm 2516.37 271767.58

etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

3.14 MR pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs 200 Sqm 2467.00 493399.31

(indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors payment wouldn't be released

until & unless he/she produces orginal warranty certificate from the manufacturer.

Supply and installation of Automatic Vertically Retractable Acoustical Wall(s) as shown on the architectural drawings. All

necessary hardware, seals, lifting machinery, electrical controls as per detailed specs. Automatic Vertically Retractable

Acoustical Wall (from here on called Operable Wall) shall refer specifically to acoustical partitions that, when in the down

position (closed) are hard, rigid, flat, plumb walls, made of a grid of rectangular acoustical panels, and when are lifted

(opened), fold upward (vertically) without the use of any manual labor, in a manner similar to an accordion, into a pocket in the

ceiling, between roof joists, or up between built in bulkheads. In the down (closed) position, the operable wall shall be

comprised of two vertical planes of acoustical panels, separated by an acoustical air space. Standard Drive System:The motor

drive assembly is mounted directly above the centre line of the operable wall. Support steel is only required at one location.

Minimum wall length without modifying our system is 9’-0” (2745mm). Used for walls up to 12’-0” (3660mm) finished ceiling

heights:The operable wall shall open and close in a manner similar to an accordion, in that all wall panels fold and unfold

sequentially in an accordion fashion. The operable wall must be manufactured by a certified ISO-9001-2008 company or an

equivalent quality control system.

References : ASTM E90, Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building

Partitions./ASTM E413, Classification for Rating Sound Insulation, ISO 354, Measurement of Sound Absorption, ISO 140-3,

Measurement of Airborne Sound Insulation, ASTM C423, Measurement of Sound Absorption : Acoustical panels shall meet

the following STC ratings in accordance with ASTM E90 (ISO 140-3) specification as reported by an independent laboratory.

Providing & fixing of WoodWorks Grille with backer made of compressed natural bamboo using lamination process with 24mm

Prelude 43 black exposed grid in Carbonized shade.The Grille panels shall be made of rapidly renewable natural bamboo

core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The

Grille panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to natural or carbonized

shades. The Grille panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to

3.16 MR centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and 300 Sqm 12500.00 3749999.58

additional end backers at 150mm from both the edges. Ledger of 6.5x24x2400mm shall be used for covering face of wall

angle. Open edges shall be covered using Edge Caps of 44x19x2400mm and Blade Junction of 66x38x2400mm shall be used

along the connection of two Grille panels.. The Grille panel shall have a fire performance of Class B according to EN13501-1.

The Grille panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%.

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and supplying Acoustical Wall Panelling with square edges made of fiber glass substrate 25mm thick and wrapped

on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the

Architect/ Person in-charge of any size and shape providing a minimum sound absorption level of 0.90 NRC to be affixed to

wall using Wall panel impalers .

Providing and fixing woodwork 16 mm thick forming 600*600 mm tiles with Tegular edge. Perforation in the panel will be of

6mm/8mm/10mm or as per architect approval, the wooden ceiling panels to be backed with black acoustic fleece with NRC of

0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of “BOLLARD” make with 24mm/15mm wide T - section flanges

color Black. The main T runner with length and size of 24X38mm/ 15X38mm made from .30mm thick sheet spaced at

3.18 MR 1200mm Centre to Centre and cross T of size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main T 200 Sqm 3564.00 712799.81

at 600mm center to centre to form a grid of 1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm

made of 0.30mm sheet to be interlocked at middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of

size 19X20 The Wooden acoustic panel laminated in desired shade as per Engineer In charge / Architect’s approval.

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer,

fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral

fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain

coating process); opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or

more); panel to panel colour consistency (measured by photo spectrometer); highly durable (passes hardness test for

minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly

having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react

with lacquer coating (compatible neutral cure silicon)

Customised Wall Panel - Plain; designed(400mm X 600mm); Supply , Testing and Commisioning of maintainance free Original

3.2 MR Moss Wall of size 600 x 400 mm panel of natural light green color/ shade.The plant shall be for indoor use only and requires 30 Sqm 41117.00 1233509.90

no Direct Sun Light or Watering / Spraying of water.

Providing and fixing partition upto ceiling height consisting of G.I. frameand required board, including providing and fixing of

frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick

fixed vertically within flanges of floor and ceiling channel and placed ata spacing of 610 mm centre to centre by 6 mm dia bolts

3.21 9.105 and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame

work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25

mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and

direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification marks)

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic

Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade

silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

3.22 MR requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design 30 Sqm 13363.00 400889.87

and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure

provided, along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC.

Providing and fixing of Ecoresin panel of sixe 1220mm x 2440mm with variety of inlay between panels of specified Gauge.

The panels are made from ecoresin sheet with engineered polyester resin with a thickness of 6.5/9.5 mm (+/- 5%)with a

top/bottom finish as sandstone finish. The product conforms to Class A impact rating in accordance with ANSI Z97.1-2004 at

3.23 MR 1/8” thickness, has no detectable VOC off-gassing as measured under ASTM standards D 5116 and D 6670, is Greenguard™ 4 Each 301525.00 1206099.99

Indoor Air Quality certified and has a minimum of 40% post-industrial recycle content certified by a recognized 3rd party

certification group, such as Scientific Certification Systems (SCS). The design of the product is based on specification &

approval of Engineer-in-charge as per tender drawing.

Providing & supplying of Window Blinds as per the approved sample, DUETTE Single HONEYCOMB SHADES Easy rise

operating system and standard design option Original Non-woven honeycomb shades having soft fabric appearance and high

energy-efficient fabric with high tear strength constructed out of Anti static, resilent, colour fast & Sanitized Treat 100% spun

bonded non-woven polyester fiber & precision manufacture to form a hexagonally shaped duette pleat . Pleat dimension

¾”Honeycomb structure with distinct air pocket for energy effeciency and increased insulation. Shadings are duotone, with

neutral tone facing the exterior and color facing the interior .Being a Low shading co-efficient will have following Comfort rating

& solar optical properies. The HEADRAIL shall measure 49.68 wide and 36.66mm deep & thick 1.27mm extruded from 6063

T6 alu. alloy & shall be powder coated to a smooth finish with a thickness of 40 microns. All cords & cord holes shall be fully

concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate independent of

each other providing superior pleat retention & structure strength. INSTALLATION BRACKETS shall be of high tension spring

steel suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. POLYESTER CORD shall be 0.9mm in

diameter & of woven hollow core. ENDCAP shall be molded acrylic color matched to the head & bottom rails. BOTTOM RAIL

shall be a single channel section, measuring 30mm wide and 12.5mm deep & thickness 1-1.2mm extruded from 5005 H-16

alu. alloy & shall be powder coated with a smooth finish to a thickness of 15-25 microns. HOLD-DOWN BRACKET (optional)

shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It shall be suitable for sill,

face or side facing. CORD.EQUILISER shall be injection molded from impact modified acrylic with a high flexural modulus.

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller

Blindscomprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .Thetear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch

forquick,easy and safe installation, molded plastic with steel spring support and inserted intothe tubeend.Itshallbe drivenby a

ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade.The Shade whenlowering or

raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel

3.25 MR location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of installation. TheSUPPORT 170 Sqm 3083.00 524110.01

BRACKETS shall be of coated steel & provided with covers and used in right hand or left handpositions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling

Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be

of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shallincorporateakeywayintegral

withthetubetoaccommodatethespline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAINshall be 2mm diameter cord with 4.5mm diameter acetal balls molded co-axially toit on6mm pitchtoformanendless

ballchain.It is usedforraisingor loweringactionoftheshades.

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per

details of Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be constructed out of 18 mm

MDF, finished with 1mm. Thk laminate shade as per Architect’s approval. Cost to include edge margin in teak wood and

poilshed in colour matching laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth

3.29 6.13 level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 133 Sqm 1018.05 135400.65

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

3.31 13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over

3.32 13.26 plastered surface to prepare the surface even and smooth complete. 500 Sqm 214.30 107150.00

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 2000 Sqm 137.85 275700.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face,

3.34 9.140 and fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick MDF Board 900 Sqm 1084.60 976140.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face,

3.35 MR and fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

MR 4mm thick MDF Board 525 Sqm 700.00 367507.80

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and

0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers,

3.36 MR with first & last fixing point at not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, 900 Sqm 1022.00 919798.45

other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels

located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

3.37 9.127 adhesive of approved quality. 750 Sqm 890.55 667912.50

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3,

50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by

3.38 12.57 criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. 900 Sqm 307.35 276615.00

TOTAL WALL FINISHING WORKS 3717549.88 15854679.43

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All

shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick

4.01 MR PVC edge banding, All Shutters finished in high gloss acrylic of approved. The cabinet boxes of floor units will be supported 12 Sqm 26479.41 317752.94

by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish attached by

hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only

front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet

boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All

shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

4.02 MR requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick 9 Sqm 19047.50 171427.47

PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using

metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall

be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 10 Each 3548.41 35484.05

4.02B MR Providing and fixing baskets 10 Each 4012.65 40126.46

Digitally signed by AMIT

10 AMIT SINGH

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing anti-viral,anti-bacterial,anti-mould and anti-odour coating (invisible and odourless) based on cutting edge technology

Premium Purity that creates self disinfecting surfaces for 365 days, works with the combination of light (natural or artificial).

The coating should be able to purify air and improve the indoor climate by decomposing VOC's-Nox,Sox,Carbon monoxide,

Benzene etc. and also be approved on surfaces with food contact. The solution should be implemented by trained

professionals with electro-static sprayers. It should decompose microbes like MRSA, CORONAVIRUS, SWINE FLU, E-COLI,

EBOLA, SALMONELLA, ADENOVIRUS, NOROVIRUS, INFLUENZA etc., and also be able to reduce contamination by

4.03 MR decomposing microbes within minutes. In addition to this, provide Eco-friendly salt and water based Electrochemically 700 Sqm 895.62 626933.09

Activated water solution for daily cleaning that would be able to replace majority of currently used chemicals and disinfectants

for surface cleaning. SOP's for hygiene and cleaning for the premises with these solutions to be made and staff trained in use

of the daily cleaning and disinfection solution. The premises should show positive comparitive ATP results for microbial and

cleanliness levels .The coating should have successfully passed various EN tests for relevant bacteria,viruses,mould and

fungi. from various International laboratories and organizations (ECHA list, FDA compliant ,WHO compliant,ISO, ) FSSAI,

DIPP registered.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and

the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to

IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20

4.04 22.3 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including 30 Sqm 774.25 23227.50

rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7

kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide

and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and Fixing Air purifier. Air purifier , Fan all in one. Vacuum filled HEPA filters. air purifiers an advanced HEPA H13

filtration system that captures gases and 99.95% of particles as small as 0.1 microns. For gases grid matrix turbulent flow

4.06 MR carbon based chemically dosed filter. Air purifiers have powerful Air Multiplier™ technology to purify the whole room. (700-800 19 Nos. 56900.00 1081100.01

sqft per machine coverage)

TOTAL MISCELLANEOUS WORKS 23227.50 2272824.02

Hand painting directly on wallCreating design and creation of Art work concept on given subject. With initial visit to site,

preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed

5.01 MR creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare 10 Sqm 21901.98 219019.83

detailed working shop drawings (full scale) based on the Concept drawings .

Canvas paintings (oil /acrylic medium) Creating design and creation of Art work concept on given subject. With initial visit to

site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short

5.02 MR listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare 20 Sqm 10764.00 215280.04

detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions.

Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find suitable as long as it is

permanent in nature. Creating design and creation of Art work concept on given subject. With initial visit to site, preparation

of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s

5.03 MR and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed 5 Sqm 38000.00 190000.01

working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy

/mock up Fabricated in sun board with digital print for client approval.

Digitally signed by AMIT

11 AMIT SINGH

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

TOTAL ART WORKS 624299.88

6 HORTICULTURE AND LANDSCAPING WORKS

6.01 MR Supply and Planting Draco plant having 6ft height complete. 20 Each 11500.00 230000.04

Supply and Planting Monstera plant having 3-4 ft height complete.

6.03 MR Supply and Planting Lolina plant having 2-3 ft height with Coco-peat, mud and manure complete. 20 Each 1600.00 32000.02

Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m with 6-8 suckers, well developed, fresh and healthy lush green

leaves from bottom to top complete.

Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with 15 to 18 equal suckers, well developed, full of fresh and

healthy leaves from bottom to top complete.

Supply of full soil fill conical shaped planters of specified volume and dimensions in stone finish or equivalent. planters to be

indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water outlet hole & plug, single layered peel-proof construction, light weight, rust

proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against

6.06 MR any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company

Digitally signed by AMIT

12 AMIT SINGH

SINGH 17:15:13 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Supply of double layered translucent backlit cylinderical shaped - hand carfted pattern planters of volume 18 ltr; approx.

dimension 24(h)x18(d) in granite/ stone/ solid finish or equivalent. planters to be indigenously made by rotational moulding,

with homogeneous 100% recyclable, industrial grade polymer-resin mix, with textured surface and stone match finishes.

6.07 MR planters to have concealed shock resistant back lighting system with secured supply wire and an integrated water outlet hole 5 Each 9500.00 47500.00

& plug, peel proof construction, asbestos free, light in weight, without any joints, rust proof, uv stabilized, anti-frost feature and

easy to clean. planter supplier must give 1 year warranty against any led, fading or cracking for indoor and outdoor use.

Supply of double layered translucent backlit cylinderical shaped - hand carfted pattern planters of volume 40 ltr; approx.

dimension 40(h)x18.5(d) in granite/ stone/ solid finish or equivalent. planters to be indigenously made by rotational moulding,

with homogeneous 100% recyclable, industrial grade polymer-resin mix, with textured surface and stone match finishes.

6.08 MR planters to have concealed shock resistant back lighting system with secured supply wire and an integrated water outlet hole 5 Each 12500.00 62500.01

& plug, peel proof construction, asbestos free, light in weight, without any joints, rust proof, uv stabilized, anti-frost feature and

easy to clean. planter supplier must give 1 year warranty against any led, fading or cracking for indoor and outdoor use.

TOTAL ART WORKS 638999.99

Company name Logo cut in SS brush 3d letter (SS304) of text ht. 600 and of deph 1.5" font to be cut to sizes and directly

7.01 MR installed on available base as per with approved SS fixtures, including necessary hardware, substructure, extra, as specified

and directed by Engineer in charge. The letters shall be back lit. 25 Nos. 5600.00 139999.99

7.02 MR Various Direction signages of exit and washroom identification with LED glow panel and proper fixture for installation and

connection 20"x9" 10 Nos. 4207.00 42069.96

7.03 MR Providing making and fixing in position custom made SS siganges of sizes 16"x5"as per Architectural drawings and instruction

with approved SS fixtures, approved base including necessary hardware, substructure extra complete as per detail drawing, 64 Nos. 935.00 59839.82

as specified and directed by Engineer in charge

TOTAL ART WORKS 241909.77

Digitally signed by AMIT

13 AMIT SINGH

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) Model No. SIG- EACH 5 25245.00 126225.00

CHR-41233 or equivalnt

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630X460X130

MR 2 MM Model No. XQS-WHT-43901 or equivalent EACH 5 38568.00 192840.00

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 5 1799.00 8995.00

Model No. ZAS-WHT-9002 or equivalent

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 5 2554.00 12770.00

WALL FLANGE (Model No. ALDCHR-769L300X190 or equivalent)

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 5 17845.00 89225.00

SET, SIZE: 375X520X400 MM SLSWHT- 6953BIUFSM

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE ACPWHT-

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

MR 7 FLANGE SIG-CHR-41053 EACH 10 3382.00 33820.00

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm SIG-CHR-41083 EACH 5 4821.00 24105.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK ALD-CHR-573 or EACH 5 2339.00 11695.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION

MR 10 KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT EACH 5 10793.00 53965.00

FLUSH CONTROL PLATE) Model No. APCWHT- 5012500S or equivalent

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 11 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 12 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick Each 5

17.31 13 hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1411.15 7055.75

1 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

17.34 14 Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

18.53 15 quality conforming to IS : 8931

18.53.1 15 mm nominal bore Each 20 500.35 10007.00

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 16 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 17 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 5 362.40 1812.00

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching M 5

18.78 18 surface after housing G.I. pipe etc. 171.80 859.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

18.7 19 CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes M 50 325.10 16255.00

18.7.3 25mm nominal outer dia pipes M 20 408.55 8171.00

18.7.4 32mm nominal outer dia pipes M 20 500.95 10019.00

18.7.5 40mm nominal outer dia pipes M 5 674.35 3371.75

18.7.6 50mm nominal outer dia pipes M 5 927.00 4635.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes M 40 441.15 17646.00

18.8.2 20mm nominal outer dia pipes M 30 513.75 15412.50

18.8.3 25mm nominal outer dia pipes M 5 626.05 3130.25

18.8.4 32mm nominal outer dia pipes M 5 712.75 3563.75

2 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

18.51 21 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore Each 2 708.40 1416.80

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

MR 22.0 including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

MR commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 100.00 536.00 53600.00

MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 20.00 416.00 8320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

MR 23 enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 24 complete in all respects. 0.00

MR 25 Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 12 536.00 6432.00

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

MR 27 cover with screws and other required fitting complete as required. 1001.00 12012.00

3 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

A.18 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

A.19 1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.20 1.5 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 6735 433.00 2916255.00

PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single

A.21 1.6 core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS Metre 200 662.00 132400.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

A.22 1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 948 122.00 115656.00

1.24.5 6 pin 15/16 amp socket outlet Each 91 197.00 17927.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.23 1.26 excluding modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

A.24 1.27 existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

B.1 1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100 233.00 23300.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 260 1005.00 261300.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 130 1365.00 177450.00

Supplying and fixing of following sizes of steel conduit along with accessories in

B.2 1.20 surface/recess including painting in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required.

Supplying and making end termination with brass compression gland and aluminium lugs for

C.2 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

C.4 MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable RM 100 874.00 87401.40

(b) 3.5 C x 95 Sqmm XLPE cable RM 50 699.00 34950.00

© 3.5 C x 70 Sqmm XLPE cable RM 50 579.00 28950.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 50 426.00 21300.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 673.00 33650.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

D.2 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

2.13 complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

D.3 2.5 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

D.5 2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for pop up

E.11 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 62 577.00 35774.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.12 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 15 12106.00 181590.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.13 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 16 6803.00 108848.00

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

E.14 MR Mechanism for Floor Box Set 31 263.00 8153.00

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.15 MR modules for Floor Box Set 31 1533.00 47523.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

E.16 1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 38 148.00 5624.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

E.17 MR unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

3 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

E.20 MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 100 3602.83 360283.15

(b) 225mmx38mm(GI) - 3 compartment Mtr 100 2959.62 295961.81

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

E.21 MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer i

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.22 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Set 950 47.00 44650.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

E.23 1.21 surface/ recess including cutting the wall and making good the same incase of recessed

conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

E.24 4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.25 1.19 insulated , shielded with fine tinned copper braid and protected with PVC sheath in the Meter 1300 47.00 61100.00

existing surface /recessed steeel/ PVC conduit as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 12 13838.00 166056.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

4 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

14 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium Each 1 200000.00 200000.00

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -6 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

(c ) 125 Amps TPN MCB - 4 nos

Panel complete as above

15 MR UPS Panel

5 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium Each 1 177590.00 177590.00

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Two (2) nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

1 Nos. 250A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 6 nos

Panel complete as above

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

6 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commissiong of High Efficient 60kVA/60 KW Model IGBT

Rectifier & IGBT Inverter, Modular Fault Tolerant designFailure in any one of the module the

others keeps supplying to the load without interruption. Approved Make, 12V VRLA Batteries,

65 AH or saiuitable for 30 minutes backup. Exide (40 nos on each bank) Make Exide,

MR Accessories ( Cabling between UPS and the Battery upto 10 Mtr distance for each UPS SET 2 1553765.00 3107530.00

considering cable Routing,Battery Rack and Battery Interlinks, lugs etc ) DC MCCB between

UPS and Battery complete in all respect as per the directions of engineer in charge. UPS

shall produce 30 minutes backup.

Total of Electrical items 6567553.00 6409832.61

7 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire with

LED(Light Emitting Diode) system power: 28W, 120 LM/W system efficacy,

colour temperature of 4000K, neutral white, 230V constant current driver,

70% of luminous flux after 50,000 operating hours, energy efficient LEDs,

CRI>80, luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver efficiency

≥ 88%, surge protection of 2.5kV, direct light emission, Aluminium body,

polyester white powder coat applied over a 5-stage pre-treatment, Prismatic

diffuser for glare-free uniform light, UGR<19, Electronic control gear

Protection class I, IP40,

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder

2 MR white coloured coat applied over a 5-stage pre-treatment trim, prismatic no 100 1750.00 175000.00

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40,

Supply, Installation, Testing and Commissioing of Pendant luminaire with LED

(Light Emitting Diode), system power 28 W, luminous flux of luminaire 3080

lm, 110 LM/W system efficacy, direct light emission CRI>80, colour

temperature of 4000K, Neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

3 MR white coloured coat applied over a 5- stage pre-treatment, high efficiency no 150 6000.00 900000.00

glare-free snap fit micro-prismatic diffuser for homogeneous light distribution,

ZHLS (Zero Halogen Low Smoke) internal wiring, integral Electronic control

gear, adjustable suspender,

Protection class I, IP 20,

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of COB based surface

mounted/pendent downlight, system power: 10W, 110 Lm/W, luminous flux of

luminaire 1100lm, colour temperature of 4000K, 230V constant current driver,

4 MR 70% of luminous flux after 50,000 operating hours; energy efficient LEDs, no 70 4500.00 315000.00

direct light emission, housing in aluminium, round, polyester Silver powder

coat applied over a 5-stage pre-treatment, aluminium reflector, 50x80

elliptical beam,Electronic Control Gear, Protection class I, IP20, Ø = 100 mm,

Supply, Installation, Testing and Commissioing of Modular recessed luminaire

HPE (High Performance Efficiency) LED (Light Emitting Diode), system power:

44W, Luminous flux of luminaire 4840 lm, 110 LM/W system efficacy, colour

temperature of 4000 K, neutral white, CRI > 80, 230V constant current driver,

70% of luminous flux after 50,000 operating hours, Energy efficient LEDs,

Direct light emission, Luminaire profile in aluminium, Polyester powder

aluminium white coloured coat applied over a 5- stage pre-treatment, Snap fit

satin diffuser for a homogenous light distribution ZHLS(ZERO HALOGEN

LOW SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV,

Supply, Installation, Testing and Commissioing of Modular recessed luminaire

with HPE (High Performance Efficiency) LED (Light Emitting Diode), system

power: 14W, Luminous flux of luminaire 1540 lm, 120 LM/W system efficacy,

colour temperature of 4000 K, neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, Energy efficient

LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder

aluminium white coloured coat applied over a 5- stage pre-treatment, Snap fit

satin diffuser for a homogenous light distribution ZHLS(ZERO HALOGEN

LOW SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV,

Supply, Installation, Testing and Commissioing of Pendant luminaire with LED

(Light Emitting Diode), system power 32W, luminous flux of luminaire 2880 lm,

color temperature of 4000K, neutral white, direct light emission, 230V,

constant current driver, aluminum support profile, polyester powder coated

7 MR grey applied over a 5 stage pre-treatment, prismatic diffuser, Electronic no 16 13125.00 210000.00

Protection Class I, IP 20,

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlight

luminaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode)

system power: 8 W, Luminous flux of luminaire 760 lm, Colour temperature of

4000 K, Neutral white, SDCM 3, CRI > 80, 230 V constant current driver, 70%

of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct

light emission, Luminaire housing in aluminium, Polyester powder-white

coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, electronic control gear,

Protection class II, IP 40

Supply, Installation, Testing and Commissioing of Pendant luminaire with LED

(Light Emitting Diode), system power 14 W, luminous flux of luminaire 1540

lm, direct light emission CRI>80, colour temperature of 4000K, Neutral white,

230V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy efficient LEDs, luminaire profile in aluminium, Plastic moulded

end caps, Polyester powder Aluminium white coloured coat applied over a 5-

14 MR stage pre-treatment, high efficiency glare-free snap fit micro-prismatic diffuser no 10 6000.00 60000.00

for homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal

wiring, integral Electronic control gear, adjustable suspender,

Protection class I, IP 20,

L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Supply, Installation, Testing and Commissioing of Modular pendant Formation

luminaire made up of 22 nos of linear lights with all connectors and

accessories to give a continuous effect with HPE (High Performance

Efficiency) LED (Light Emitting Diode) system power: 9 W, Luminous flux of

luminaire 990 lm, Colour temperature of 4000 K, Neutral white, CRI > 80, 230

V constant current driver, 70% of luminous flux after 50,000 operating hours,

Energy efficient LEDs, Direct light emission, Luminaire profile in anodised

aluminium, snap fit satin diffuser for a homogenous light distribution, ZHLS (

ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear,

Sliding fixing wire suspension,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV,

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlight with

LED (Light Emitting Diode) system power: 8 W, Luminous flux of luminaire 640

lm, Colour temperature of 3000 K, Warm white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LED, direct light emission, housing in die-cast aluminium, Polyester

16 MR powder black coloured coat applied over a 5-stage pre-treatment ceiling trim, no 10 1875.00 18750.00

with reflector, beam angle of 11-15°, electronic control gear,

Protection class II, IP 20,

Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

Supply, installation, testing and commissioning of Inverter type High Wall Indoor Unit

1.0 M.R. with Stablizer, 3 star, including cost of copper piping (upyo 15 mtr, drain pipe wire

a MR High Wall - 2 Tr (Inverter Compressor with stablizer) Nos 2 72000.00 ₹ 144000.00

2.0 MR SITC of Copper Pipe for 2 Tr AC RMT 100 1800.00 ₹ 180000.00

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral

sound attenuator made of 22G GI sheet casing length 900mm consisting of 25mm

3.0 M.R. thick 48kg/m3 density fiber glass wool covered with tissue paper ,elliptical volume

control damper , calibrated differential pressure sensor (DPT sensors) at inlet

complete with digital Thermostat.( All VAV shall be factory calibrated ).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a M.R. VFD 5 HP or as directed by the engineer in charge Nos. 8.0 40000.00 320000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air

MR ducts. Quoted price shall be inclusive of necessary conduting, copper control cabling Nos. 8.0 17500.00 140000.00

from the sensors to the respective VFDs as per "Approved Shop Drawings".

MR INLINE FANS (Single Phase) - ACOUSTICALLY LINED

1 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular

inline fans for exhaust air complete with sheet metal casing, 25mm thick acoustic

insulation, direct driven centrifugal fan, motor with proper protection and inspection

door. Fan shall be suitable for operation on 220+6 % volts, 50 Hz,1 phase AC power

supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall

3.0 M.R. be installed as shown in the drawings and will be of following characteristics :

All single phase inline fans shall be provided with factory fitted speed regulators. All

Fans Should be complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for

indoor installations.

Fan Capacity S.P Area to

No. (Cfm) (mmWG) to be exhausted

Supply & fixing of Pre-Filter section complete with 50mm thick washable synthetic

fibre filters. Velocity across the filters shall not exceed 450 FPM. Filters section shall

3.0 M.R. have necessary flanges etc. for connection with ducting.

Filter to be installed in suction ducting of Fresh Air Fan.

Air Qty - 600Cfm-700Cfm

Filters Area- 1.35-1.55SqFt (Approx.)

Air Qty - 1225Cfm

Filters Area- 2.75SqFt (Approx.)

5.0 M.R. Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of

following capacity with GSS casing and aluminium alloy impellers with high efficiency

aero-foil sections, blades, the impeller directly driven by TEFC induction motor

a M.R. suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as required. This cost shall NOS 4.0 135000.00 540000.00

include the cost for suitable panel, DOL starter, breakers etc compete in all respect

as per the directions of engineer in charge.

M.R. 9000 cfm at 15 mm static presuure for fresh air With Class "H" insulation.

2 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main

branch and return air path as and where required of required sizes i/c control

wiring,the damper shall be motorized and spring return so as to close the damper in

the event of power failure automatically and open the same in case of power being

6.0 16.20 restored. The spring return action shall be inbuilt mechanism and not externally

mounted. The damper shall also be closed in the event of fire signal complete as

required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

7.0 GI Gravity Louver

Supply, installation, testing and commissioning of GI Gravity Louver complete with

a M.R. neoperene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per SQM 1.0 6600.00 6600.00

specifications.

8.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the

a M.R. specifications and shop drawings. SQM 18.0 5900.00 106200.00

- For Rectangular Ducts

9.0 MR Insulated Flexible Duct

Supply, Installation, Testing and Balancing of flexible ducting comprising of inner as

well as outer skin constructed out of aluminium & fibre glass insulation 25mm thick of

minimum 24 kg/cu.m density insulation sandwitched in between. Duct should confirm

to fire rating standards BS-476 part 5, 6 & 7.

Flexible Ducts of following sizes as per approved shop drawings, specifications :

Universal (Jubilee) clamp should be provided to fix the flexible duct in the

spigots/Butterfly Dampers and covered with aluminium tape. Circular clip with

chain/GI threaded rod to be provided to support the flexible duct.

Supply, Installation and Testing of single piece GI round spigot made out of spinning

process with 50mm height and having grooves on both sides and circular flanges.

Spigots shall be installed on main ducts to facilitate connection of flexible ducts.

3 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Supply, Installation and Testing of Butterfly damper of GI sheet construction with two

flap with round flange on one side and 10mm grove on other side for fixing of flexible

duct with the help of band, 20 Gauge Frame 250mm dia & above, 22 Gauge Frame

upto 200mm dia & 22 Gauge Blade in all sizes as per thespecifications and shop

a MR drawings.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet

metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,

16.12.1 splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with

10.0 16.15 aluminium volume control dampers as per specifications. SQM 4.0 9105.00 36420.00

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers

11.0 16.16 but without volume control dampers complete as required SQM 10.0 5910.00 59100.00

Supplying, fixing testing commissioning of supply air diffusers of powder coated

12.0 16.17 aluminium with aluminium volume control dampers with anti smudge ring & SQM 29.0 12184.00 353336.00

removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated

13.0 16.18 aluminium without volume control dampers with anti smudge ring & removable core. SQM 21.0 8121.00 170541.00

4 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of

air handling units/ductable split units//inline fans. Flexible connections shall be

10.0 MR constructed using imported fire retardant fabric with extruded aluminium frame/flange RM 55.0 1440.00 79200.00

on both sides of approved make.

Supply, Installation and Testing of extruded aluminium powder coated air transfer

11.0 16.16 DSR grilles to be provided at the door of toilets/pantry. SQM 2.0 5910.00 11820.00

Supply, Installation, Testing and Balancing of linear slot diffusers as per the

approved shop drawings and specifications. Each slot shall be 25mm wide. The

diffuser face shall be a one piece extrusion so there are no visible joints. Slot

diffusers shall be complete with end caps either as end plates or end angles or

integral part, air control blades etc. Slot diffuser have a variable neck length and the

diffuser face could be optionally be fitted to the plenum box on site. Diffuser shall

have provision to access collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using

chains or gripple wires.

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 34.0 12500.00 425000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at SQM 2.0 5500.00 11000.00

the suction of fresh air/discharge of Exhaust air as per the specifications and shop

13.0 MR drawings. Sample of bird screen to be got approved from consultants and Clients

prior to procurement.

14.0 INSULATION

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish

closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable

16.23 adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm

thick self adhesive nitrile rubber tape insulation complete as per specifications and as

5 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick

resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section

of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue

16.21 paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts SQM 80.0 708.00 56640.00

with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as

required and as per specifications

DISMANTLING, LIFTING, SHIFTING & REINSTALLING OF EXISTING SYSTEM

Shifting/ Relocation, Installation, Testing and Commissioning of AHU existing

17.0 M.R. complete with cabling, insulation, and other materials as required complete in all NOS 8.0 30000.00 240000.00

respect as per the directions of the engineer in charge.

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of

chilled water piping inside the building (with necessary clamps, vibration isolators and

fittings but excluding valves, strainers, gauges etc.) duly insulated with following

18.0 16.2 closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal

conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation

applied by suitable adhesive complete including repairing of damage to building etc.

as per specifications and as required complete in all respect

16.2.7 125mm dia.(32 mm thick insulation) Metre 5.0 3742.00 18710.00

16.2.8 100mm dia.(32 mm thick insulation) Metre 80.0 2980.00 238400.00

16.2.9 80mm dia.(32 mm thick insulation) Metre 110.0 2226.00 244860.00

16.2.10 65mm dia.(32 mm thick insulation) Metre 90.0 1794.00 161460.00

16.2.11 50mm dia.(32 mm thick insulation) Metre 180.0 1553.00 279540.00

16.2.12 40mm dia.(32 mm thick insulation) Metre 10.0 1257.00 12570.00

Supply installation Sound alternator( return air baffle) of with Acoustic Lining open

cell nitrile rubber acoustic insulation, with density 140-180 kg/cum. and having anti

19.0 MR fungal & anti bacterial properties as per DIN EN ISO 846, MATHOD A&C. as per nos 100.0 3200.00 320000.00

ASTM Standard C 1071-05. 10 mm thick .

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with

20.0 16.15 aluminium volume control dampers as per specifications. SQM 2.0 9105.00 18210.00

6 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

Advance Oxidation Plasma Cell - Duct Mounted Air Purification System

Supply, installation, testing and commissioning of duct mounted Air Purification

System with AOP comprising of UVC lamp 254 NM with nanoX coating metallic

compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly

quartz casing tube, with the capability to produce ionized Hydroxyl oxidizers with in-

built plasmoX to generate ion generator pins (+- ions 10^6) along with ultrasonic

radio frequency waves for pest repellancy. The UV-C lamp will be a low-pressure

mercury type and of such intensity as to provide minimum performance as listed

26.0 MR below. The UV-C lamp will produce only Germicidal UV (by definition this means

99.99% UV-C energy). The airpurifier will have built in LED indication system stating

the operation of the 3 technologies the UV lamp, ionizer and pest repellant. The AOP

cell shal be capable of removing Particulate matter, Gasous Contamination as well as

Microbial Contamination. The power / control cabling between the Pentagon units

and the power source / controls shall be included in the cost .The wattage of the lamp

shall not be less than 21 watts upto and length not less than 436 MM upto 6500 CFM

and a minmum of 48 watts upto 28000 CFM or combination based on the application

area. The system

AHU (6500Cfm shall be capable of reducing microbial bacteria, virus and spores , Nos

Air Quality Monitor

Indoor Air quality monitor to measure Air quality parameters including PM2.5,TVOC,

27.0 MR CO2, Humidity and Temperature.This monitor should be a 3 tier architecture

including sensor Hardware, secure cloud infrastructure, monitoring apps including

dashboard, android/IOS apps, where ever requires

Air Quality Monitor Nos 1.0 66425.00 66425.00

TOTAL HVAC WORKS 5085789.0 7513959.0

7 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - HVAC WORKS

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 50 16415 820750

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

2 2 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

3 4 Joints i.e. Refnet Joints/Header with Insulation for refrigearnt piping

3.1 MR Y Joints NOS 15 8697 130449

4 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

1 Digitally signed by AMIT

SINGH 17:15:13 IST

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 245 24500

4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 331 66200

4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 60 466 27960

4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 588 117600

4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 707 35350

4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 865 43250

4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 25 1022 25550

4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 25 1108 27700

5 6 Cable/Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

6 7 Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

6.1 4.6.8 300 mm width X 62.5 mm depth X 2.0 mm thickness meter 20 1190 23800

6.2 4.6.10 450 mm width X 62.5 mm depth X 2.0 mm thickness meter 20 1574 31480

7 8 Drain Piping

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

MR fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm tick ins.) Rm 300 374 112200

Total HVAC WORKS 2070515.00 152524.89

2 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR ( INR ) N0N -DSR ( INR )

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

17.2.4 1 detector complete with mounting base complete as required. No 100 2858.00 285800.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

17.2.6 5 sounder complete as required. No 4 2651.00 10604.00

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

17.2.11 7 complete as required. No 2 3267.00 6534.00

Supplying, installation, testing & commissioning of intelligent addressable duct detector

17.2.13 8 including suitable Photo detector complete with base as required. No 8 7814.00 62512.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

17.3.1 11 MP3 player (including 6 zone button paging station) with seamless integration facility with main No 1 126411.00 126411.00

fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

17.3.7 13 operating at 240 Volt AC Supply complete as required. NOS 3 145793.00 437379.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

17.5.2 14 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete Mtr. 600 173.00 103800.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 15 existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

17.5.3.2 16 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 360 89.00 32040.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

17.5.4 17 accessories like coupler etc. as required. Metre 360 53.00 19080.00

1 Digitally signed by AMIT

SINGH 17:15:13 IST

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

M.R. 18 backup complete as required. NOS 8 3870.00 30960.00

Supplying, Installing, Testing & Commissioning of LED technology, High efficiency,

Emergency light s with Function Use as an emergency luminaire Testing system Stand Alone,

Housing Polycarbonate, Glow wire test : 850°C, RAL9003, Type of mounting Surface:

Recessed base for ceiling, double sided cone diffuser, plexi plate diffuser, Degree of

protection IP65, Operation Mode Non Maintained or Maintained & Non Maintained mode

selectable, Connection voltage 230V -/+ 5% [220V-240V] 50-60Hz, Permissible ambient:

temperature +5°C to +40°C, Battery: Ni-Cd, Duration 3 hours, Viewing distance 20m or 30m,

Insulation class II, 20 mtrs. viewing distance, Dimensions in mm: 270 x 119 x 49 ; for 30 m

viewing distance version: 371 x 170 x 62

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

17.3.9 20 microphone assembly complete as required. NOS 1 81756.00 81756.00

MR 21 Loop Card capacity of 159 detectors For BMS Fire integration Nos 1 130000.00 130000.00

MR 23 Interface Card for BMS fire integration Nos 1 55500.00 55500.00

MR 25 Supply of repeater panel having 640 character liquid crystal with backlit control Nos 1 90000.00 90000.00

TOTAL FIRE ALARM WORKS 1397536.00 322800.00

2 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES : FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,

18.7 flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling

1 with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories :

18.21.1 Pendant type 350 Each 522.00 182700.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with

3 18.25 branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT

female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of

following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete

with all accessories as per manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 8 NOS 12912 103295

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 8 NOS 2932 23452

1 Digitally signed by AMIT

SINGH 17:15:13 IST

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). 8 NOS 4746 37969

2 Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - GAS SUPRESSION SYSTEM

DSR. SNO. DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

DSR. SNO. DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

DSR ( INR ) NON-DSR (INR)

Gas Suppression System

SITC of CCOE Approved Seamless Novec 1230 Cylinder and

M.R. 1 Valve Assembly, 34 Ltrs. Capacity, filled with NOVEC 1 Nos 100513.00 0.00 ₹ 1,00,513.00

1230 Suppression Liquid (item No. 2), pressurized to 25 bar.

M.R. 3 SITC of Electrical Actuator for Master Cylinder. 1 Nos 18940.00 0.00 ₹ 18,940.00

M.R. 4 SITC of Discharge hose 1 Nos 4627.00 0.00 ₹ 4,627.00

M.R. 5 SITC of Local Manual Actuator 1 Nos 1959.00 0.00 ₹ 1,959.00

M.R. 6 SITC of Cylinder Low Pressure Switch 1 Nos 2448.00 0.00 ₹ 2,448.00

SITC of Nozzles, 360 Deg / 180 Deg Throw, selection as per

M.R. 7 UL approved hydraulic flow calculations. 2 Nos 3265.00 0.00 ₹ 6,530.00

M.R. 8 SITC of Suppression System Piping: 1 Lot 88687.00 0.00 ₹ 88,687.00

M.R. 9 Gas Release Switch/Module 1 Nos 5170.00 0.00 ₹ 5,170.00

SITC of gas release panel with communication port for

synchronizing with Addressable FAS Panel

1 Digitally signed by AMIT

SINGH 17:15:13 IST

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

1. Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 16650 57.00 949050.00

1.53.1 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

2) Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

3 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end Redantant . Keystone Unshielded Outlet, 180DG

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

5 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6,

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG 222 400.00 88800.00

U/UTP Patch Cord Blue, LSZH, C6, 2M Nos.

7 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed 222 950.00 210900.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos.

8 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user Redantant device connectivity.High Speed 222 400.00 88800.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos.

9 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to Rack End Redantant device connectivity.High Speed 222 400.00 88800.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos.

10 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active

11 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active Redandant

UTP Components for VOICE

12 Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 13125 57.00 748125.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 RM

13 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

14 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

15 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active 175 450.00 78750.00

Riser Cable (Ivory) Nos.

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

16 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

17 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser Side

18 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed 8.00 4800.00 38400.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos.

19 Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered

Face Plate white for I/O fixing at user side 224 275.00 61600.00

Total : A - UTP Components 1697175.00 1385950.00

C. 200 Pair MDF Box

1 200 Pair MDF Box with mounting Frame 1 17500.00 17500.00

2 10 Pair Krone Module 20 900.00 18000.00

3 25 Pair Riser Cable 35 1253.00 43855.00

Total : C - MDF Box 0 79355.00

D UTP Components for Wifi

12 Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 3750 57 213750.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

13 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

14 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack end. Keystone Unshielded Outlet, 180DG C6, White

15 Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

16 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 50.00 400.00 20000.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

17 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 50.00 400.00 20000.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

18 Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

Face Plate white for I/O fixing at user side Nos. 50 275.00 13750.00

Total : D - UTP Components for Wifi 213750.00 113150.00

E UTP Components for CCTV & Access Control

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

12 Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 1800 57 102600.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

13 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

14 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack end. Keystone Unshielded Outlet, 180DG C6, White

15 Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

16 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 24.00 400.00 9600.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

17 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 24.00 400.00 9600.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

18 Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

Face Plate white for I/O fixing at user side Nos. 24 275.00 6600.00

Total : E - UTP Components for CCTV & Access Control 102600.00 52200.00

GRAND TOTAL (A+B+C+D+E) 2013525.00 1630655.00

GRAND TOTAL (A+B+C+D+E) 2013525.00 1630655.00

Digitally signed by AMIT

SINGH 17:15:13 IST

S No Description UOM Qty Rate Amount

A. Active Component for Data, Wifi

24-Port Layer 3 Stackable Managed Gigabit Switch, 20 x 10/100/1000BASE-T ports With 4 x

Combo 10/100/1000BASE-T/SFP ports, 4 x 10G SFP+ ports, Switch Resource Management

1 (SRM) for flexible management of system resources, Redundant Power Supply (RPS) support, Nos. 1 538650.00 538650.00

MPLS L2VPM/L3 VPN support, Full L3 routing protocol support including OSPF, BGP, and ISIS

for IPv4/IPv6. As Approved by NSL Incharge.

Supply instllation testing and commissioning of Access Switch of 48 x 1G POE+, 4 x SFP+ ,

370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding performance (64-

byte packet size): 130 Mpps, Secure Shell (SSH), RADIUS, TACACS + DRAM 2GB , Flash

2 2GB , 10K IPv4 Routes ,1K multicast Routes ,16K MAC address , 16K flow entries L3 Protcols Nos. 6 246954.00 1481724.00

like OSPF , PBR, MACsec, PIM , QOS from day-1 , As Approved by NSL Incharge.

SITC of 48 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The Switch should have

16K MAC address, Should have RJ-45 console port should support MSTP and DUAL

configuration, Should support Static Route Entry: IPv4 124; IPv6 50 , Should support IP-MAC-

Port Binding strictly management network devices preventing illegal access and the Man-in- the-

3 middle attack, Should support Asymmetric VLAN, Auto Voice VLAN, Should support Cable Nos. 6 187641.00 1125846.00

diagnostics, Time-based PoE: PoE ports can be turned on/off by port or system through

schedule, Operating Temperature -5 to 50°C (23 to 122°F). As Approved by NSL Incharge.

4 Supply, Installation, Testing & Commissioning of Modules 10G. Nos. 4 49920.00 199680.00

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830 Series

extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-

5 performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support. Nos. 30 68820.00 2064600.00

Providing and laying of LC- LC multimode OFC type patch cord for data and voice.

Total : A - Active Component for Data, Wifi 5449000.00

Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome

camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB

WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265, H.264,

MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour:

0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+, H.265, H.264,

1 MR MJPEG,Behavior Detection Intrusion, Crossing line, Motion detection, Object left, Nos 13 32000.00 416000.00

Missing object,Intelligent Identification Face detection, Defocus, Scene Change,PoE

(IEEE802.3 af) Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to

256GB, ANR Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90% RH(Non-

condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 16Ch Embedded Network Video

2 MR Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 52000.00 52000.00

Redundant power supply, Smart Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as

3 MR required.etc.all complete. Nos 5 27000.00 135000.00

Supply, Installation, Testing & Commissioning of 55" Flat Screen HD led (24X7) with

Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-

4 MR 232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor Nos 1 68000.00 68000.00

stand complete with making connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 2 6200.00 12400.00

Supply, Installation, Testing and Commissioning of 4Ch Embedded Network Video

6 MR Recorder with 2 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 4500.00 4500.00

Redundant power supply, Smart Analytics,

Supply, Installation, Testing & Commissioning of 32" Flat Screen HD led (24X7) with 1

Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-

7 MR 232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor Nos 29500.00 29500.00

stand complete with making connections etc complete as reqd.

Total : A - CCTV 717400.00

Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES - EPABX

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

1 Supply, Installation, Testing & Commissioning of Server based Communication System with all the required Software licenses

and Hardware - IP-PBX/IP Telephony Communications Server: The IP Telephony Solution shall support the following Services -

Voice, Video, IM, Presence and Audio Conference The Solution should be built on Active-Active Redundant Servers The IP

Telephony Solution should support H.323 and SIP The Solution should support the following Trunks - FXO, E1 PRI and SIP The

IP Telephony solution should incorporate all licenses for the Phones and Trunks Solution should support 80 Extensions from Day Nos 1 1438500.00 14,38,500

1 with future scalabilityupto 5000 users. Licenses for all Phones supplied should be provisioned on Day1 Solution should support

Hard IP Phones, Softphones, Video Phones, 50 Analog Extensions with necessary Licenses, Rack mount architecture, complete

as required and as per technical specifications.

2 Supply, Installation,Testing and commisioning of Executive Level IP Phone with Color display – 3.7 inches x 2.1 inches (9.5 cm x

5.4 cm)- Diagonal width: 4.3 inches (11 cm), Touch Screen display, 4-position adjustable tilt display, Permanently-labeled

feature buttons:, speaker, mute, headset, contacts, home, history, message, phone, forwarding, volume (separate volume

levels in handset, speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message and history, 24 administrative

buttons, Wideband speakerphone 0-5 Softkeys, Ergonomic hearing aid compatible, handset supporting TTD acoustic coupler,

Bluetooth and DECT headset support with adapter, Message waiting indicator, Ethernet (10/100/1000) line interface,

Secondary Ethernet (10/100/1000)line interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP protocol,

H.323 protocol support, Standards-based codec support: G.711, G.726, G.729A/B, G722 , Supports the following languages:

Arabic, Brazilian Portuguese, Simplified, Chinese, Dutch, English, Canadian,French, Parisian French, German,Hebrew, Italian,

Japanese (Kanji,Hiragana and Katakana), Korean, Latin American Spanish, Castilian Spanish, and Russian. Includ Licence.

3 2.8” (diagonal) color display—320 x 240 pixels, Multiple line phone with four red / green line / feature indicators around display,

4 Context sensitive soft keys, Hard buttons for phone, messages, contacts, history, home, navigation cluster, headset, speaker,

volume, mute, LEDs for speaker, mute, headset, essage, history, Wideband audio in handset and wired headset, Full duplex

speakerphone & handset, Ergonomic hearing aid compatible handset supports TTD acoustic coupler, Message waiting indicator,

Mute key with optional mute alerting, IC call alerting with 360-degree visibility, Dual-position stand, optional wall-mount stand,

Gigabit Ethernet (10 / 100 / 1000) line interface, Second Ethernet interface 10 / 100 / 1000 Mbps, PoE Class (IEEE 802.3af) Nos 53 12219.00 6,47,607

registers as class 1 device and supports 802.3az, Optional AC to 5 volt power supply • SIP protocol support, Standards-based

codec support: G.722, Opus, Configurable via Web interface, Support for HTTPS, TLS and SRTP for encryption, Recent Call Log

(100 entries), Zero touch deployment via Device Enrollment Services Support, Supports the following languages: Dutch, English

(UK & US), French, (Canada), French (France), German, Italian, Japanese, Portuguese (Brazil), Simplified Chinese, Spanish

(Latin America), Spanish (Spain),Traditional Chinese, Includ Licence.

4 Supply Installation, Testing and Commissioning of Analog Speaker Phone with backlight.

Total 31,08,607

Digitally signed by AMIT

SINGH 17:15:13 IST

SCHEDULE OF QUANTITIES : ACCESS CONTROL

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of smart card reader

Supply Installation Testing & Commissioning of Access Control Software Multi Reader and

controller confuguration and upgradable to Enterprise level with unliimited users. Databse

Supports: MS SQL, Oracle, and MS Access database types. Type of technology supports: IRIS

Sacnner, Biometric, Face, RFID , etc supports template management , Highly secured

communication with server,Allows for real- time monitoring of system status and user activities

with optional audio alerts. tamper detection, network communication loss, and many other

system attributes.

SITC of Access IP Master Controller with Enclosure & Power Supply- 1 door Universal 2

Reader TCP/IP Controller Expandable upto 4 Reader with exit reader module,4 Programmable

inputs & 4 outputs 100 mA MAX ),Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to 80% RH

(non-condensing) , 3000 USERS & 3000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS with MS Box Certified.

Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation (13.56 MHz)

Mifare/I- class technology smart Card. Memory Type EEPROM,Complies with ISO/IEC

standards for thickness. Lifetime Warranty.

Supply Installation Testing and Commissioning of double leaf 600 LBS Door Electro Magnetic

6 MR Lock with complete compatiable Bracket UL Listed. Nos 8 4,378.00 35,024.00

Supply Installation Testing and Commissioning Touchless Request to Exit button with detection

range from 4 to 12 cm.

Supply Installation Testing and Commissioning Fire Exit panic Bar single/double Door with EM

8 MR lock and requiredaccessories all includes. Nos 8 14,624.00 1,16,992.00

Supply Installation Testing and Commissioning Emergency Door Release Button, Gree, Key

9 MR Resettable, DoublePole Double Throw. Nos 8 659.00 5,272.00

Supply Installation Testing and Commissioning of Cat 6 Network cable.

Supply Installation Testing and Commissioning of 8 Core-conductor20 to 22 AWG.

Supply Installation Testing and Commissioning of AC 3 Core Plain Copper conductor, PVC

Digitally signed by AMIT

SINGH 17:15:13 IST

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in case of

recessed conduit as required

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Supplying and placing in position Main desk of the following specifications. The Main table shall be of size 3000

Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density

fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case -

1 space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height 1 4,94,415.75 4,94,415.75

Room Main Table

mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU

Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top

1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire

The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below

storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided

with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose.

The hardness of the PU coating shall be 1.5H. The overall dimensions of the back unit shall be 2215mm x 410mm

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be

designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat shall be W-54.6cm x D-49cm. High

Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS:

7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of

black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with

foam & leather. It shsall have front Pivot synchro tilt mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt

system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position

locking with antilock back mechanism which should prevent the backrest from impacting the user when the lock is released, Static seat depth adjustment

5.0 +/- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The bellow

should be single piece duly blow moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted

with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall

be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from

pedestal below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. Dimensions tolerance / variations

shall be within +/- 1 cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be

designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall be W-54.6cm x D-49cm. High

Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS:

7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of

4 Visitor Chair black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with 4 64,842.75 2,59,371.00

foam & leather. The mechanism of the chair shall have following features : 360⁰ revolving type without back tilt. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic type & injection moulded in

black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the

pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black

color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground -

min 99.4 to max 111.4 cms. Seat height - min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Providing and Placing in place of 2 seater sofa of dimensions 1410mm L x 920mm D x 890mm H. Seat height shall be 470mm. The upholstery shall be

1.2mm thickness pure leather at all touch points and 1mm thick synthetic leather at other places. The frame shall be made from combinaton of plywood

and solid wood. Plywood thickness shall be 12mm (moisture resistant and trated). Seat foam shall be slab stock foam with density super soft 32 kg/m3.

Webbing shall be double webbing of S spring and nylon belt. Legs shall be PVC legs.

Providing and Placing in place of 1 seater sofa of dimensions 920mm L x 920mm D x 890mm H. Seat height shall be 470mm. The upholstery shall be 1.2mm

thickness pure leather at all touch points and 1mm thick synthetic leather at other places. The frame shall be made from combinaton of plywood and solid

wood. Plywood thickness shall be 12mm (moisture resistant and trated). Seat foam shall be slab stock foam with density super soft 32 kg/m3. Webbing

shall be double webbing of S spring and nylon belt. Legs shall be PVC legs.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

7 Center Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, 2 15,476.25 30,952.50

height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

8 Side Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, 4 1,02,838.50 4,11,354.00

height=35.1 cm.

The overall size of the wortop shall be 2100mm x 1150mm x 740mm. Worktop shall be made from 25mm thick

MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft

closing dual access flap provided for access to power supply and data cables. The Under-structure consists of

mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-

Meeting Table 2100

9 12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is 1 5,33,601.00 5,33,601.00

added at bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser

made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each

cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be

designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat shall be W-54.6cm x D-49cm. High

Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS:

7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of

black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with

foam & leather. It shsall have front Pivot synchro tilt mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt

10 Meeting Head Chair 1 1,00,203.95 1,00,203.95

system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position

locking with antilock back mechanism which should prevent the backrest from impacting the user when the lock is released, Static seat depth adjustment

5.0 +/- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The bellow

should be single piece duly blow moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted

with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall

be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from

pedestal below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. Dimensions tolerance / variations

shall be within +/- 1 cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be

designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall be W-54.6cm x D-49cm. High

Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS:

7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of

11 Meeting Chair black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with 6 64,842.75 3,89,056.50

foam & leather. The mechanism of the chair shall have following features : 360⁰ revolving type without back tilt. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic type & injection moulded in

black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the

pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black

color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground -

min 99.4 to max 111.4 cms. Seat height - min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side unit shall be

1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick

Director Room MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick

Main Table Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated

400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security. The product must be UL Greenguard certified.

The Back Unit shall be of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

13 Back Unit approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC 4 83,126.25 3,32,505.00

membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for

security. The product must be UL Greenguard certified.

Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be

upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25%

of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW

round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded

from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of

Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The

adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and

contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of

variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth

adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected

to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual

need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and

fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5-114cm. Seat height shall be 44.5cm - 54.5cm. The

cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high

resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x

49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm,

upholstered with pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop

lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght

shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-

15 Visitor Chair pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating 12 43,552.50 5,22,630.00

position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be

6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the

comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be

high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin

wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. The product must be UL Greenguard

gold certified and BIFMA Level 2 certified.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam

with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

16 Sofa 2 seater density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 4 42,571.50 1,70,286.00

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with

Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

17 Sofa 1 seater density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 4 30,548.25 1,22,193.00

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

18 Center Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, 4 15,476.25 61,905.00

height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

19 Side Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, 8 10,283.25 82,266.00

height=35.1 cm.

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x 750mm. The side unit shall be

1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated

400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security. The product must be UL Greenguard certified.

The Back Unit shall be of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

21 Back Unit approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC 5 79,412.25 3,97,061.25

membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for

security. The product must be UL Greenguard certified.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be

upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25%

of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW

round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded

from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of

Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The

adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and

contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of

variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth

adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected

to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual

need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and

fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5-114cm. Seat height shall be 44.5cm - 54.5cm. The

cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high

resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x

49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm,

upholstered with pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop

lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght

shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-

23 Visitor Chair pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating 15 49,359.50 7,40,392.50

position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be

6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the

comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be

high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin

wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. The product must be UL Greenguard

gold certified and BIFMA Level 2 certified.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam

with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

24 Sofa 2 seater density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 5 42,571.50 2,12,857.50

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with

Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

25 Sofa 1S density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 5 30,548.25 1,52,741.25

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

26 Center Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, 5 15,476.25 77,381.25

height=35.1 cm.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

27 ST welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, 5 11,654.35 58,271.75

height=35.1 cm.

Providingin place of main table with overall size of table 1800 x 1800 x 750mm. The main table shall be of size 1800 x 900 x 750mm. The side unit shall be

900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick

Cabins/PA Main MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick

Table Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated

400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security. The product must be UL Greenguard certified.

Providingin place of main table with overall size of table 1500 x 1500 x 750mm. The main table shall be of size 1500 x 600 x 750mm. The side unit shall be

900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick

Small Cabins Main MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick

Table Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated

400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security. The product must be UL Greenguard certified.

The Back Unit shall be of dimensions 1650 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of

opening. Storage is provided with lock for security. The product must be UL Greenguard certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using Micro mesh

fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR

polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro

mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti-

shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester

fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0±

0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and

fitted with 5nos. twin wheel castors. The pedestal pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with

lumbr support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation adjustment stroke of 76 degrees. The

work shall be carried out as per guidance and instructions recieved from Engineer Incharge. The product must be SCS Indoor Advantage Gold certified and

BIFMA level 2 certified.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using Micro mesh

fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR

polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro

mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti-

shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester

fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0±

0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and

fitted with 5nos. twin wheel castors. The pedestal pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The product must be SCS Indoor Advantage Gold certified and BIFMA level 2 certified.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: The tiles on the top most frame shall be glass writing board/ clear glass tile. Bottom tiles - Plain metal/ fabric magnetic /

fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm

decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion having average wall thickness of 1.2 mm

& powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary of these blocks as well as intermediately at

33 certain locations forming conduit for passing cables. These blocks are located in the mid segment of the panels and can be provided with cutouts for 109 75,004.50 81,75,490.50

shape 1800 x 1500 mounting switch boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm thick.

Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500mm W1 x 1500mm W2 x 600D x 750H. Brackets shall

be made from 2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d

x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge. The

product must be UL Greenguard, BIFMA Level 3 certified.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain

metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum)

thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of

aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on

34 outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the 12 62,230.50 7,46,766.00

mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in variety

of combinations. The fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding

of size 1200mm x 600mm x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs- pedestal flat metal front, free standing

central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions and guidance

received from engineer incharge. The product must be UL Greenguard, BIFMA Level 3 certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high

stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in

density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

35 Workstation Chair Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The 121 15,727.55 19,03,033.55

variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic

height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The

pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height

shall be (44.5-53.8cm). The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain

metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum)

thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of

aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on

outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the

mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in variety

of combinations. The fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding.

Open Cabin Worktop size shall be- 1350mm W1 x 600mmD. Side Unit size shall be 1350mm x 450mm. Brackets shall be made from 2mm thick CRCA steel. Pedestals

Workstation with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall

be carried out as per the instructions and guidance received from engineer incharge.

Providing and placing in place of partitions across these workstations. Partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium

trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile.

Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper

honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium

extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. The prodcut must be UL Greenguard, BIFMA Level 3

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high

stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in

density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Open Cabin Main

37 Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The 31 15,727.55 4,87,554.05

Chair variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic

height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The

pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height

shall be (44.5-53.8cm). The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high

stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density

45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement

possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while

Open Cabin Visitor seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the

Chair spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The adjustable armrests

assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The powder coated tubular frame is

cantilever type and made of dida 2.54cm x 0.3cm thik MS ERW tube. Shoes are made of glass filled POly amide and fixed to thw tubular frame. The overall

dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm. The product must be UL Greenguard gold certified and BIFMA

Level 2 certified.

Providing and placing ALL WOOD HINGED DOOR UNIT (HDU). Construction & Material Knockdown construction. Door Opening Twin door with self closing

hinges of Wood made from18mm Thick Pre Laminated Board. Handle · Aesthetically appealing recessed plastic handle for& wooden Doors. Locking

Mechanism Cam lock · 3 point locking mechanism in Wood Door Shelving · Height wise Adjustable Shelf Mounting. Wooden Top shall be be made from Pre-

39 Laminated Board of 25 mm thk. Skirting of 125 mm High shall be provided. Leveler Screw type adjustable Leveler with plastic base. height. Back Panel and 62 19,688.55 12,20,690.10

storages Sides of the storageunits will be made out from 18mm thick Pre-Laminated Particle Board. Note: All partitions and side panels have levelling screws for

adjustment in case of Uneven floor to take care of +/- 10mm of uneven flooring. The work shall be carried out as per guidance and instructions received

from engineer incharge. Size shall be 900m x 450mm x 750mm.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

The overall dimensions of the top shall be 1200mm x 900mm x 720mm. The Worktop is made of a 25mm thick

MDF OSR with PU painting on top side. Understructure: It should consist of an inner tube assembly with top plate,

for worktop mounting, & an outer tube assembly with round/square bottom plate. The inner and outer tube

asemblies are telescopically connected. The top plate is made of 5mm thk HOT ROLLED steel plates (HR) (As per

Café Table 1800 x IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED steel plates (HR) ( As per IS: 2062). The inner

750 tube assembly is made of dia 82.5 X 2thk ROUND ELECTRIC RESISTANCE WELDED tubes (ERW) ( AS per

IS:7138) and 8mm thk HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using tungsten inert gas

welding. The outer tube assembly is made of dia 89 X 2.5thk ROUND ELECTRIC RESISTANCE WELDED tubes

(ERW) ( AS per IS:7138) and 8mm thk HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using

tungsten inert gas welding.The whole structure is EPOXY POLYSTER powder coated (DFT 40-60 microns). The

The overall dimensions of the top shall be 900mm x 900mm x 720mm. The Worktop is made of a 25mm thick

MDF OSR with PU painting on top side. Understructure: It should consist of an inner tube assembly with top plate,

for worktop mounting, & an outer tube assembly with round/square bottom plate. The inner and outer tube

asemblies are telescopically connected. The top plate is made of 5mm thk HOT ROLLED steel plates (HR) (As per

Cafe table 1500 x IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED steel plates (HR) ( As per IS: 2062). The inner

750 tube assembly is made of dia 82.5 X 2thk ROUND ELECTRIC RESISTANCE WELDED tubes (ERW) ( AS per

IS:7138) and 8mm thk HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using tungsten inert gas

welding. The outer tube assembly is made of dia 89 X 2.5thk ROUND ELECTRIC RESISTANCE WELDED tubes

(ERW) ( AS per IS:7138) and 8mm thk HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using

tungsten inert gas welding.The whole structure is EPOXY POLYSTER powder coated (DFT 40-60 microns). The

The seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with indoor grade UV resistance. Seat size

shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular welded frame is made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm

42 Café Chair stainless steel 202 grade tube. The rubes are buff polished to give shiny finish. The shoes and Amrest are made of high impacy strength PolyPropylene 84 4,788.00 4,02,192.00

polyemr compound with indoor grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions of the chair shall be 52.4cm x

55.8cm x 84.5cm. The seating height shall be 45.0cm. THe product must be UL Greenguard gold certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high

stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in

density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

44 Reception Chair Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The 2 13,877.25 27,754.50

variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic

height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The

pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height

shall be (44.5-53.8cm). The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam

with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

45 Sofa 2 seater density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 2 42,571.50 85,143.00

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Digitally signed by AMIT

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with

Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or

leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

46 Sofa 1 seater density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also 10 30,548.25 3,05,482.50

shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

47 Center Table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, 4 15,476.25 61,905.00

height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

48 Side table welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, 11 10,283.25 1,13,115.75

height=35.1 cm.

The understructure shall be made up of two different sub asssembly top and Bottom, both aseemblies are made

up of Plywoof of 12mm thick moisture resistance and termite proofing. The sub-assly is connected to each other

via metal spring assembly. The structure is covered with 2mm cardboard to provide a backing surface for foam

padding. The seating surfaces has slab foam of 40 kg per meter cube which is covered with 32 kg per meter cube

super soft foam on the top. The sides of top and bottom structure is covered with slab foam of 28 kg per meter

cube. Upholstery consists of 2 separate upholstered stitched covers made up of 340 GSM polyester fabric for dual

tone design. Spring Assembly is made up of Grade II spring with dia. 0.8cm which is being sandwiched between

HR plates of 0.315 cm thick clamped with MS Rod having dis. 0.6cm. The overall dimensions shall be dia. 52.5cm

Worktop shall be Made of 36mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to

top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top

is available as per layout. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board

of E1-P2 grade and approved shade Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 -

WP profile is used for connecting panels together. Modesty panel shall be made of 18mm Thick Pre-laminated twin

board of E1-P2 grade Edge banded with matching 2 mm thick PVC lipping. An array of panels made of 0.8mm and

1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and

Table (per seat)

cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and

single seater modules below access flap per seat. The table is equipped with Extron cables cubbies along with

cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150° head module

and 165° head module. For straight two seater and single seater modules, provision to mount AV cables is

provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned

seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density

45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam

with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The

armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm

thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

Meeting room designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more

Chairs comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio

1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding

mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the

range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of

10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre

dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Digitally signed by AMIT

10 AMIT SINGH

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

Providingand placing in place of meeting table. Worktop shall be made from 25mm thick MDF one side

prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual

access flap provided for access to power supply and data cables. The Under-structure consists of mixture of 25mm

Meeting Table 2400 and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge

x 1200 banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom

edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm

CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power

box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an

The overall size of the wortop shall be 1000mm dia. x 740mm. Worktop shall be made from 25mm thick MDF one

side prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing

dual access flap provided for access to power supply and data cables. Made of 25mm thick MDF-one side pre-

laminate board with 0.4mm PVC membrane pressed on to top. Gromet provided for wire management. The Under-

structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The

Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm

thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x

1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned

seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density

45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam

with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The

armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm

thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

Meeting Room designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more

Chairs comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio

1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding

mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the

range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of

10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre

dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray

holder.the base frame should made of 30 mm x 30 mm 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic

handles and with lock and door clatch. The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and with ball slides for smooth

57 glide. The mattress platform should be made of 12 mm thick and made of PU foam, leatherite and ply board.Tthe headrest should be adjustable on gas 1 47,964.00 47,964.00

Examination Bed lift.There should be ss304 made tissue roll holder. There should be 1 mm thick CRCA made step stool with leveler with ball slide for smooth operation.

There should be 1 mm thick CRCA made BP aparatus holder. Total load bearing capacity should be 135 kg. All the metal parts should be pre treated and

powder coated with epoxy polyester powder coating.

Providing in place of main table with overall size of table equal to 1200 x 600 x750mm. The table is made of 25 mm thick Prelaminated Twin Board of E1-

P2 grade edge banded with matching 2mm thick PVC lipping. Grommet provided on work surface for wire manaement. The modesty panel is made of 25

Security Guard mm thick Prelaminated Twin Board of E1-P2 grade. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved

Table shade edge banded with matching 2 mm thick PVC lipping. The HInge door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Handles are provided for ease of opening. Pedestals are provided with lock for

Digitally signed by AMIT

11 AMIT SINGH

SINGH 17:15:13 IST

Snos. Item Specifications Qty Offered Price Amount Reference Image

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high

stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in

density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

59 Chair Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The 1 13,877.25 13,877.25

variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic

height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The

pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height

shall be (44.5-53.8cm). The product must be UL Greenguard gold certified and BIFMA Level 2 certified.

Overall Size : Length : 175cm Width : 75cm Height : 2.6cmMETAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS

:Material:SHEESHAM SOLID WOOD , COLOR:Metal part Color:Black

Overall Size : Length : 55cm Width : 57.5cm Height : 77cm Seating Height : 46cm Back & Seat Material :Light Brown Fabric (300 GSM)

•Seat- 60 mm foam (24.5D)

•Back- 45mm foam (24.5D)

Leg Material Metal -Black powder-coated

Providing and placing ALL WOOD HINGED DOOR UNIT (HDU). Construction & Material Knockdown construction. Door Opening Twin door with self closing

hinges of Wood made from18mm Thick Pre Laminated Board. Handle · Aesthetically appealing recessed plastic handle for& wooden Doors. Locking

Mechanism Cam lock · 3 point locking mechanism in Wood Door Shelving · Height wise Adjustable Shelf Mounting. Wooden Top shall be be made from Pre-

62 Storages Laminated Board of 25 mm thk. Skirting of 125 mm High shall be provided. Leveler Screw type adjustable Leveler with plastic base. height. Back Panel and -

Sides of the storageunits will be made out from 18mm thick Pre-Laminated Particle Board. Note: All partitions and side panels have levelling screws for

adjustment in case of Uneven floor to take care of +/- 10mm of uneven flooring. The work shall be carried out as per guidance and instructions received

from engineer incharge.

Digitally signed by AMIT

12 AMIT SINGH

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

A. AV System BOARD ROOM

SITC of 98" smart 4K LED Display,Native Resolution 3840 x

2160 (UHD), Brightness Minimum 490cd/m2, Inputs HDMI-

3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1, LAN-

1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect

additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or

less, Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one

point touch) , Multi touch point Min 20 Points or Higher,

98" main LED White Board ,Writing, Pen, Palm Eraser ,Save, Screen

display Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or

better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 32W(16W x 2) or higher ,

ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have

provision for OPS PC.

SITC of 55" smart 4K LED Display,Native Resolution 3840 x

2160, Brightness Minimum 390cd/m2, Inputs HDMI-

3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1, LAN-

1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect

additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or

less, Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one

point touch) , Multi touch point Min 20 Points or Higher,

55" main LED White Board ,Writing, Pen, Palm Eraser ,Save, Screen

display Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or

better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher ,

ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have

provision for OPS PC.

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Portable USB Video Confrencing camera,PTZ Camera, 20X

Optical Zoom, Digital Zoom: Up to 12X Wide Viewing Angle

up to 72.5 Degrees, RJ-45 Port, Quiet Motor with Servo

3 USB Camera 1 Nos. ILR 3,12,420.00 ILR 3,12,420.00

Algorithm for PTZ Control, Full HD 1080p signal output

format with a high frame rate of 60 fps, HDMI, and USB

3.0 synchronous video outputs

Supply, Installation, testing and commissioning of wireless

digital boundary layer Microphone with 18 or more channel,

RF output 80mW or more, Cardioid pickup pattern,

Frequency range : 1880 to 1930 MHz, Connectivity : RJ-45,

256-bit AES Encryption (specifications includes single

microphone set of transmitter and receiver) etc and

complete as required.

Supply, Installation, testing and commissioning of wireless

digital microphone charger, charging capacity : 2 or more

simultaneously with lighting indication, Qi charging, Should

5 Charger base 14 Nos. ILR 27,612.00 ILR 3,86,568.00

be from same OEM as of wireless mic etc and complet

required as per specifications.

Supply Installation Testing and Commissioning of digital

signal processor with minimum 14no. Or more Mic / line

input with phantom power and AEC and 8 or more line

output, at least 2 channel of USB input and output for

software Video Conferencing,, Should have sampline rate of

48kHz or better, Should be expandable for port expansion.

64x64 or more Dante Input for Digital audio transfer as per

need,should support Control with App via iOS and Android

devices, or any third-party control system, Shall have Built-

in filters, feedback suppression, AGC etc complete as

required as per specifications

Supply, Installation, testing and commissioning of 6.5" two-

way coaxial thin edge ceiling loudspeaker, 100V

transformer power taps : 24,12,6, watts, Conical dispersion

7 Ceiling speakers : 145° or more, impedance : 8, low impedance RMS 12 Nos. ILR 8,437.00 ILR 1,01,244.00

continous power : 30watts, frequency range : 50 Hz - 20

kHz or better, frequency response : 60Hz - 20KHz or better

etc complete required as per specifications.

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Supply, Installation, testing and commissioning of quad

channel Amplifier, 4 X 120watt or more, THD+N (@ 1 kHz)

: < 0.3%, Technology : Class-D, Common mode rejection

ratio : 70dB or better, Temperature controlled FAN,

8 Amplifier Switching mode power supply, should have Protection 1 Nos. ILR 1,36,607.00 ILR 1,36,607.00

features like : DC Short circuit & Over heating & Over load

& Signal limiting etc, Built-in high pass filter and gain

adjustment option etc complete required as per

specifications.

This HDMI Switcher/ Splitter 8x4 can connect 2HD signal

sources with 8HD display terminals. It can easily split 2-

way HD signal sources to 8 HDTVs or projectors which

support HD. It also can amplify the HDMI signal. The two

input HD signal sources can be switched freely. The HDMI

Switch/Splitter 2x8 can support highest video resolution

3840x2160/30hz,Compatible with fully HDMI 1.3/1.4

Specification compliant. buffer HDMI signals at the same

9 Switcher 1 Nos. ILR 3,80,000.00 ILR 3,80,000.00

time, HDMI or DVI to HDMI cables used for inputs and

outputs. Included IR remote adapter for operational

flexibility and easy control, no manual clicking the select

button needed. Support single high definition display and

multiple output HD signal sources, such as DVD Players,

A/V receiversand Set Top Boxes, 360 Sky Box Freesat

Virgin Bluray Player DVD HDTV Projector Camcorder HTPC

SITC of cable enclosure with tilt up lid Multiregion power

socket, , Pass through holes for HDMI, Audio, VGA & LAN

10 Cable Qubi 4 Lot ILR 18,500.00 ILR 74,000.00

connectivity etc. as required Complete as per specification

Supply, installation, testing and commissioning of of 2.5

11 Speaker Cables Sqmm x 2 core ATC copper Conductor, Insulated 300 Rmt ILR 176.00 ILR 52,800.00

Cores,PVC Sheathed Speaker Cables .

Supply, installation, testing and commissioning of of

CAT6 Cable (DSR

12 Shielded twisted pair CAT6 Cable (STP) complete etc as 100 Rmt ILR 57.00 ILR 5,700.00

required 4 pair.

Supply, installation, testing and commissioning of of 35'

13 Audio Cable 1 Set ILR 12,282.00 ILR 12,282.00

15–pin HD & 3.6mm Stereo Audio Cable

Supply, installation, testing and commissioning of of 12'

14 Audio Cable 1 Set ILR 25,500.00 ILR 25,500.00

15–pin HD & 3.5mm Stereo Audio Cable

Supply, installation, testing and commissioning of of

15 Connectors Various Connectors For Above Mentioned Configuration etc. 1 Lot ILR 20,000.00 ILR 20,000.00

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Supply, Installation, Testing and Commissioning of

Networking Rack , Front Glass Door Unit and Grilled back

door unit, lockable Door unit, Suitable Load Rating . Pillar of

16 Network Rack frame must be aluminum and Rest plated are steel, Powder 42 U ILR 1,073.00 ILR 45,066.00

Coated Rack with Castors , Fan , Cable Manager , Full Tray

Unit, PDU complete in all respect as required.

17 TX-RX Transmitter -Reciever 8 Nos. ILR 72,000.00 ILR 5,76,000.00

Intel Core i5 11th Generation, 4 GB DDR4 RAM, 128GB

SSD, 1000 mbps gigaLAN, 450 mbps WI-FI, bluetooth

18 OPS Windows 10 Pro License Pre-Loaded, HDMI 2.0, Mini DP, 1 Nos. ILR 63,756.00 ILR 63,756.00

USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio

SITC of Premium High Speed Gold plated HDMI Cable 6'

HDMI Cable, Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz

19 HDMI Cable (3840x2160) 8 bit color depth, max. 18.0 Gbps data rate, 5 Nos. ILR 900.00 ILR 4,500.00

Material: Tinned copper, 28 AWG and also to comply the

detailed technical specifications as attached

20 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. ILR 8,500.00 ILR 8,500.00

B. AV System CMD Room

SITC of 65" smart 4K LED Display,Native Resolution 3840 x

2160, Brightness Minimum 390cd/m2, Inputs HDMI-

3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1, LAN-

1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect

additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or

less, Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one

point touch) , Multi touch point Min 20 Points or Higher,

65" main LED White Board ,Writing, Pen, Palm Eraser ,Save, Screen

display Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or

better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher ,

ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have

provision for OPS PC.

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Portable USB Video Confrencing camera,PTZ Camera, 20X

Optical Zoom, Digital Zoom: Up to 12X Wide Viewing Angle

up to 72.5 Degrees, RJ-45 Port, Quiet Motor with Servo

2 USB Camera 1 Nos. ILR 3,12,420.0 ILR 3,12,420.00

Algorithm for PTZ Control, Full HD 1080p signal output

format with a high frame rate of 60 fps, HDMI, and USB

3.0 synchronous video outputs

USB: 2.0 (micro-B to Type A) ▪ Bluetooth 5.0, Class 1

(HFP/HSP/A2DP) ▪ NFC for easy pairin, Audio Specifications

▪ OmniSound ® HD voice ▪ Speaker:

╶ Frequency response: 100Hz to 20,000Hz ╶ Volume:

90dB (SPL 0.5m) ▪ Microphones: ╶ 4 MEMS microphones:

100Hz to 7,000Hz ╶ Pickup range: 20ft/6m

▪ Audio expansion: daisy chain connection (future release).

3 Wireless Mic ▪ Full Duplex▪ Acoustic Echo Cancellation and Noise 1 Nos. ILR 1,50,000.0 ILR 1,50,000.00

Suppression, Touch buttons: ╶ Answer call / Power

╶ End Call ╶ Bluetooth ╶ Volume Up / Down ╶ Mute

▪ LED Status Indicators ╶ Power status╶ Call status

╶ Bluetooth status ╶ Battery status ▪ Upgradable Software

▪ Upgradable Software, Integrated Lithium Polymer Battery

╶ Call time up to 14 hour, Temperature range: 5°- 40°C ▪

Relative humidity: 20 – 80% condensation-free

Intel Core i5 11th Generation, 4 GB DDR4 RAM, 128GB

SSD, 1000 mbps gigaLAN, 450 mbps WI-FI, bluetooth

4 OPS Windows 10 Pro License Pre-Loaded, HDMI 2.0, Mini DP, 1 Nos. ILR 63,756.0 ILR 63,756.00

USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio

SITC of Premium High Speed Gold plated HDMI Cable 6'

HDMI Cable, Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz

5 HDMI Cable (3840x2160) 8 bit color depth, max. 18.0 Gbps data rate, 1 Nos. ILR 900.0 ILR 900.00

Material: Tinned copper, 28 AWG and also to comply the

detailed technical specifications as attached

6 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. ILR 8,500.0 ILR 8,500.00

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Supply installatyion testing and commissioning of Active

speaker pair of 35 watt, Transducers: LF: 135 mm (5.25 in)

low frequency loudspeaker HF: 19 mm (.75 in)

Polycarbonate dome tweeter Frequency Range: 80 Hz - 20

kHz Amplifier Power: 35 Watts per channel Maximum SPL

Per Pair: 115 dB Crossover Frequency: 4.2 kHz

Input Sensitivity: +4 dBu XLR 1/4"; 0 dBu RCA

Signal Input Connectors (x2): Balanced Neutrik* Combo

XLR 1/4" TRS; Unbalanced RCA Power Requirements: 19

VDC / 3.42 A - use only supplied power supply

Headphone Jack: 3.5 mm (1/8") Dimensions: 235 x 159 x

143 mm (9.3 x 6.3 x 5.6 in). tudio quality transducers for

accuracy, and rich bass response: 80 Hz - 20 Khz

35 watt per-channel power amplifier and high sensitivity

7 Active speakers drivers produce exceptional output: 115 DB max SPL per 1 Pair ILR 21,000.0 ILR 21,000.00

pair Balanced XLR, ¼”, and unbalanced RCA inputs allow

connection to a range of signal sources Stereo headphone

jack allows monitoring using headphones Ergonomic, side-

mounted volume control - simultaneously controls left and

right speakers High frequency adjust control - allows the

user to contour HF response to application requirements

Magnetically-shielded transducers for use near CRT

monitors and magnetically sensitive equipment Internal

peak limiter and overload protection circuit - protects the

system from damage caused by continuous over-driving

Wall-mount capable using optional MTC-2P mounting kit

Included snap-on pedestals optimize listening angle

for desktop applications including cabling etc as per

instruction of Engineer In charge

C. AV System Meeting Room 07 PAX & Excutive Dinning cum meeting Room

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

SITC of 75" smart 4K LED Display,Native Resolution 3840 x

2160 (UHD), Brightness Minimum 390cd/m2, Inputs HDMI-

3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1, LAN-

1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect

additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or

less, Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one

point touch) , Multi touch point Min 20 Points or Higher,

75" main LED White Board ,Writing, Pen, Palm Eraser ,Save, Screen

display Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or

better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher ,

ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have

provision for OPS PC.

Portable USB Video Confrencing camera,PTZ Camera, 20X

Optical Zoom, Digital Zoom: Up to 12X Wide Viewing Angle

up to 72.5 Degrees, RJ-45 Port, Quiet Motor with Servo

2 USB Camera 2 Nos. ILR 3,12,420.0 ILR 6,24,840.00

Algorithm for PTZ Control, Full HD 1080p signal output

format with a high frame rate of 60 fps, HDMI, and USB

3.0 synchronous video outputs

USB: 2.0 (micro-B to Type A) ▪ Bluetooth 5.0, Class 1

(HFP/HSP/A2DP) ▪ NFC for easy pairin, Audio Specifications

▪ OmniSound ® HD voice ▪ Speaker:

╶ Frequency response: 100Hz to 20,000Hz ╶ Volume:

90dB (SPL 0.5m) ▪ Microphones: ╶ 4 MEMS microphones:

100Hz to 7,000Hz ╶ Pickup range: 20ft/6m

▪ Audio expansion: daisy chain connection (future release).

3 Wireless Mic ▪ Full Duplex▪ Acoustic Echo Cancellation and Noise 2 Nos. ILR 1,50,000.0 ILR 3,00,000.00

Suppression, Touch buttons: ╶ Answer call / Power

╶ End Call ╶ Bluetooth ╶ Volume Up / Down ╶ Mute

▪ LED Status Indicators ╶ Power status╶ Call status

╶ Bluetooth status ╶ Battery status ▪ Upgradable Software

▪ Upgradable Software, Integrated Lithium Polymer Battery

╶ Call time up to 14 hour, Temperature range: 5°- 40°C ▪

Relative humidity: 20 – 80% condensation-free

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Intel Core i5 11th Generation, 4 GB DDR4 RAM, 128GB

SSD, 1000 mbps gigaLAN, 450 mbps WI-FI, bluetooth

4 OPS Windows 10 Pro License Pre-Loaded, HDMI 2.0, Mini DP, 2 Nos. ILR 63,756.0 ILR 1,27,512.00

USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio

SITC of Premium High Speed Gold plated HDMI Cable 6'

HDMI Cable, Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz

5 HDMI Cable (3840x2160) 8 bit color depth, max. 18.0 Gbps data rate, 2 Nos. ILR 900.0 ILR 1,800.00

Material: Tinned copper, 28 AWG and also to comply the

detailed technical specifications as attached

6 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 2 Nos. ILR 8,500.0 ILR 17,000.00

Supply installatyion testing and commissioning of Active

speaker pair of 35 watt, Transducers: LF: 135 mm (5.25 in)

low frequency loudspeaker HF: 19 mm (.75 in)

Polycarbonate dome tweeter Frequency Range: 80 Hz - 20

kHz Amplifier Power: 35 Watts per channel Maximum SPL

Per Pair: 115 dB Crossover Frequency: 4.2 kHz

Input Sensitivity: +4 dBu XLR 1/4"; 0 dBu RCA

Signal Input Connectors (x2): Balanced Neutrik* Combo

XLR 1/4" TRS; Unbalanced RCA Power Requirements: 19

VDC / 3.42 A - use only supplied power supply

Headphone Jack: 3.5 mm (1/8") Dimensions: 235 x 159 x

143 mm (9.3 x 6.3 x 5.6 in). tudio quality transducers for

accuracy, and rich bass response: 80 Hz - 20 Khz

35 watt per-channel power amplifier and high sensitivity

7 Active speakers drivers produce exceptional output: 115 DB max SPL per 2 Pair ILR 21,000.0 ILR 42,000.00

pair Balanced XLR, ¼”, and unbalanced RCA inputs allow

connection to a range of signal sources Stereo headphone

jack allows monitoring using headphones Ergonomic, side-

mounted volume control - simultaneously controls left and

right speakers High frequency adjust control - allows the

user to contour HF response to application requirements

Magnetically-shielded transducers for use near CRT

monitors and magnetically sensitive equipment Internal

peak limiter and overload protection circuit - protects the

system from damage caused by continuous over-driving

Wall-mount capable using optional MTC-2P mounting kit

Included snap-on pedestals optimize listening angle

for desktop applications including cabling etc as per

instruction of Engineer In charge

D. & E AV System Meeting Room 06 PAX x 2 Nos

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

SITC of 65" smart 4K LED Display,Native Resolution 3840 x

2160, Brightness Minimum 390cd/m2, Inputs HDMI-

3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1, LAN-

1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect

additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or

less, Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one

point touch) , Multi touch point Min 20 Points or Higher,

65" main LED White Board ,Writing, Pen, Palm Eraser ,Save, Screen

display Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or

better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher ,

ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have

provision for OPS PC.

Portable USB Video Confrencing camera,PTZ Camera, 20X

Optical Zoom, Digital Zoom: Up to 12X Wide Viewing Angle

up to 72.5 Degrees, RJ-45 Port, Quiet Motor with Servo

2 USB Camera 2 Nos. ILR 3,12,420.0 ILR 6,24,840.00

Algorithm for PTZ Control, Full HD 1080p signal output

format with a high frame rate of 60 fps, HDMI, and USB

3.0 synchronous video outputs

USB: 2.0 (micro-B to Type A) ▪ Bluetooth 5.0, Class 1

(HFP/HSP/A2DP) ▪ NFC for easy pairin, Audio Specifications

▪ OmniSound ® HD voice ▪ Speaker:

╶ Frequency response: 100Hz to 20,000Hz ╶ Volume:

90dB (SPL 0.5m) ▪ Microphones: ╶ 4 MEMS microphones:

100Hz to 7,000Hz ╶ Pickup range: 20ft/6m

▪ Audio expansion: daisy chain connection (future release).

3 Wireless Mic ▪ Full Duplex▪ Acoustic Echo Cancellation and Noise 2 Nos. ILR 1,50,000.0 ILR 3,00,000.00

Suppression, Touch buttons: ╶ Answer call / Power

╶ End Call ╶ Bluetooth ╶ Volume Up / Down ╶ Mute

▪ LED Status Indicators ╶ Power status╶ Call status

╶ Bluetooth status ╶ Battery status ▪ Upgradable Software

▪ Upgradable Software, Integrated Lithium Polymer Battery

╶ Call time up to 14 hour, Temperature range: 5°- 40°C ▪

Relative humidity: 20 – 80% condensation-free

Digitally signed by AMIT

SINGH 17:15:13 IST

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

Intel Core i5 11th Generation, 4 GB DDR4 RAM, 128GB

SSD, 1000 mbps gigaLAN, 450 mbps WI-FI, bluetooth

OPS Windows 10 Pro License Pre-Loaded, HDMI 2.0, Mini DP, 2 Nos. ILR 63,756.0 ILR 1,27,512.00

USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio

SITC of Premium High Speed Gold plated HDMI Cable 6'

HDMI Cable, Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz

HDMI Cable (3840x2160) 8 bit color depth, max. 18.0 Gbps data rate, 2 Nos. ILR 900.0 ILR 1,800.00

Material: Tinned copper, 28 AWG and also to comply the

detailed technical specifications as attached

USB Extender SITC of USB cables Extendre 10 meters etc all compelte 2 Nos. ILR 8,500.0 ILR 17,000.00

Supply installatyion testing and commissioning of Active

speaker pair of 35 watt, Transducers: LF: 135 mm (5.25 in)

low frequency loudspeaker HF: 19 mm (.75 in)

Polycarbonate dome tweeter Frequency Range: 80 Hz - 20

kHz Amplifier Power: 35 Watts per channel Maximum SPL

Per Pair: 115 dB Crossover Frequency: 4.2 kHz Input

Sensitivity: +4 dBu XLR 1/4"; 0 dBu RCA Signal Input

Connectors (x2): Balanced Neutrik* Combo XLR 1/4" TRS;

Unbalanced RCA Power Requirements: 19 VDC / 3.42 A -

use only supplied power supply Headphone Jack: 3.5 mm

in). tudio quality transducers for accuracy, and rich bass

response: 80 Hz - 20 Khz 35 watt per-channel power

Active speakers amplifier and high sensitivity drivers produce exceptional 2 Pair ILR 21,000.0 ILR 42,000.00

output: 115 DB max SPL per pair Balanced XLR, ¼”, and

unbalanced RCA inputs allow connection to a range of signal

sources Stereo headphone jack allows monitoring using

headphones Ergonomic, side-mounted volume control -

simultaneously controls left and right speakers High

frequency adjust control - allows the user to contour HF

response to application requirements Magnetically-shielded

transducers for use near CRT monitors and magnetically

sensitive equipment Internal peak limiter and overload

protection circuit - protects the system from damage

caused by continuous over-driving Wall-mount capable

using optional MTC-2P mounting kit Included snap-on

pedestals optimize listening angle for desktop applications

F. AV System Conference Room 9 Pax