Loading
Loading…
Loading…
Tender Value
₹88.8 L
EMD Value
₹1.8 L
Closing Date
12 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIG/NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less ;where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, asper the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information asper format-6, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s)during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any signaling work involving outdoor work and / or addition and /or alteration in existing Indoor signaling system. OR any CLS or RI or EI or TPWS or IBS or ABS or BPAC work involving indoor and/or outdoor. Similar work to include indoor if the tendered work involves addition and / or alteration in existing indoor signaling system and outdoor if the tendered work involves outdoor work. OR Any such work involving activities as given in the name of the tendered work.
14 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should submit the certified copy of partnership deed (PD) along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with the tender documents, the tender will be treated as having been submitted by individual signing the tender documents. The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partners should submit along with the tender or at a later stage, a power of attorney(POA) duly stamped and authenticated by a Notary public or by Magistrate in favour of the specific person whether he or they be partners of the firm or any other person specifically authorizing him or them to submit the tender, sign the agreement ,receive money, witness measurement, sign Measurement Books, compromise, settle, relinquish any claims preferred by the firm and signed No claim certificate and refer all or any dispute to arbitration.
Tenderer should clearly state the status of firm and submit the relevant document in support of authentication, in absence of following/relevant documents the offer of tenderer is summarily rejected: (A)Self-declaration /proprietorship certificate in case of proprietor firm along with POA if any. (B) Partnership deed and power of attorney in case of partnership firm. (C)Certified copy of an extract of resolution passed by the board of directors in case of limited firm or Private Limited Company
(a) Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)of Tender document
(b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and 1.1.2 he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of Para10 of the Tender Form (Second Sheet)of Tender document
(c) Partnership Firm: (i)All documents as mentioned in para18 of the Tender Form document
(d) Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney 1.1.4 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of Tender document
(e) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 1.1.5 participation intenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/ LLP or JV in which they were/ are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v)All other documents in terms of Para 10 of the Tender Form(Second Sheet).
(f) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of 1.1.6 the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of tender document
Information as per Para 16 of GCC Part (1)(Tender form second sheet Annex-I) related to Employment/Partnership Etc. of Retired Railway Employees and Clauses 59 (9) & 62 (1) (xv) to GCC regarding employment etc. Of retired government officers by railway contractors
Certificate of Information regarding EMPLOYMENT/PARTNERSHIP etc. of Retired Railway Employees with the tender as per the attached proforma, Format 11 of tender document
Certificate of NO RELATIVE being an employee of Western Railway as per attached Performa Format10 of Tender document
Supply of part material, installation, testing, and commissioning of outdoor signalling work in connection with Rebuilding of Arch Bridge No. 182, 294, 303, 309, 314, 337 & 351 on Rajdhani Route Virar - Joravasan Section of Mumbai Division,Western Railway.
SG_216_2_169_WA_PH32~WR
SG_216_2_169_WA_PH32
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹1.8 L
17 Sept 2026
17 Sept 2026
28 Sept 2026
112 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 31,35,594.41 | ||
| — | 150.00 | — | — | ||
| G.I. Bonding wire soft for track circuit bonding 8 S.W.G. (4mm Dia.) or as per instructions of Engineer In-Charge. | — | — | — | 10,225.5 | |
| — | 750.00 | — | — | ||
| Channel Pins MS(Galvanized) single roove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M or as per instructions of Engineer In-Charge. | — | — | — | 4,530 | |
| — | 300.00 | — | — | ||
| Drill bits 7.2 mm or as per instructions of Engineer In-Charge. | — | — | — | 25,872 | |
| — | 600.00 | — | — | ||
| Copper Lugs 16 to 25 Sqmm for power cable or as per instructions of Engineer In- Charge. | — | — | — | 5,496 | |
| — | 30.00 | — | — | ||
| Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks. | — | — | — | 33,619.5 | |
| — | 75.00 | — | — | ||
| Switch plate Lubricant, High Performance Slide Chair Lubricant With Excellent Corrosion Protection Colour - Black,) Appearance Semi Fluid,Thickener Type Inorganic, Penetration 450-470, 4 Ball Weld Load 315kg, 4 BallWear Scar 0.60mm, Temperature Range -30C To 80C, Packing of 12.5 Kg PailBox. | — | — | — | 3,56,400 | |
| — | 1500.00 | — | — | ||
| PVC tube for bootleg outside dia 15mm, inside dia 11mm thickness 2 mm 50 mtrs each coil or as per instructions of Engineer In-Charge. | — | — | — | 12,405 | |
| — | 1.00 | — | — | ||
| Supply of Digital Insulation Tester 100V/250V/500V range of Model Rish insu 20 Make :RISHABH or MECO or Similar. | — | — | — | 8,240 | |
| — | 1.00 | — | — | ||
| Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 seconds or Superior. | — | — | — | 44,774.52 | |
| — | 1.00 | — | — | ||
| Digital low current clamp meter to measure current leaks (parasitic draw down to 1 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | — | — | — | 18,194.34 | |
| — | 1.00 | — | — | ||
| Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 M, and frequency up to 1 MHz with a set of leads & carrying case. Model - DCM39A or equivalent/ higher make Motwane /Stanley /Fluke/ Megger. | — | — | — | 12,853.59 | |
| — | 1.00 | — | — | ||
| Hand Operated Hydraulic crimping tool with die sets of capacity from 16 sq.mm to 400 Sq.mm and carry bag for transportation ACCEPTED MAKE/BRAND ? Voltz and similar( Warranty Period : Upto 30 months from the date of supply) | — | — | — | 5,935.4 | |
| — | 1.00 | — | — | ||
| Supply of Digital Earth Resistance tester three terminal type with LED display, 1999 count, KOICO model 5600 or any reputed make approved by engineer in-charge. | — | — | — | 13,356.84 | |
| — | 1.00 | — | — | ||
| Supply of Standard Tools set. Approved by engineer in-charge. | — | — | — | 35,317.28 | |
| — | 1.00 | — | — | ||
| Battery operated Rail core drilling machine with quick action clamping system on track along with 18 mm TCT rail core drill. Maximum core cutting capacity 36 mm, rated speed 250/450 RPM.Battery type Lion, Battery voltage 50V, battery pack capacity 4AH. Number of batteries supplied- 2 Noswith suitable charger 1 no. Special designed pressurized internal spindle cooling to give maximum life of core cutter by avoiding heating. 3 sets of 22, 13, 16, 7.2 gauze drills adapters to be provided along withthe machine. Weight of the machine 18.5 kgs maximum. Make- Eibenstok, Bosch, KPT with all accessories suitable for the Railway Signalling and along with carrying case. | — | — | — | 1,08,334.19 | |
| — | 5.00 | — | — | ||
| Diagnostic Terminal :Multisection Portable operator console for onsiteprogramming of Axle Counters as per technical requirement | — | — | — | 4,57,005 | |
| — | 21.00 | — | — | ||
| SS Location box made of Spl Grade SS 304of size as per drg.No.DRM/SG/948 (Singleapp. Case).The manufacturer's certificateinregard to grade of stainless steel andtestreport be submitted atthe time ofsupply. Note:-(1)Enclosure should bemadeof 1.6 mm & doormade of 2 mm thickSS304 sheet. (2)SS 20 mm(rod) X 100mm(height)male female hinges formovingdoor smoothly. (3)SS 16 mm Rod fixhandlefor both the door.(4)SS sheet stiffner(0.8to1 mm thickness) tostrengthen the doorbothside. (5) SS hook (6 mmrod) to beprovided onboth doors forkeepingthe dooropen position.Stoppers to be providedforboth doors. (6)E-typelockingarrangement(W11) for bothdoor andliftinghook (5X150 mm)02 Nos (7) SS sheet450mm x 650 mm for fulllocation boxprovision ofany writingwork at frontsidedoor etc. (8)Provision of switch boardforlocation light fitted with one two pin holder,One three pin socket(female) andtwo pianotype switches of 6A for location | — | — | — | 12,56,975.58 | |
| — | 21.00 | — | — | ||
| IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8. | — | — | — | 1,13,162.07 | |
| — | 21.00 | — | — | ||
| Maintenance Free Earth Electrode of length3m, including supply of 3 bags of Earthenhancementmaterial for earthling(10KGs/bag) for each electrode & otheraccessories as per Drg. No. SDO / RDSO/E&B/001 andRDSO Spec No. RDSO /SPN/197/2008. This item includes thefollowing items: (a) Copper bonded steelearth electrodeof 3.0 meter long & 17.2 mmdia with Cu- bonding thickness of min 250micron - 1 no. (b) Earth-enhancingcompound(10 Kg/Bag) - 3 No. (c) Cu- strip 200 X 25 X 6 mm to terminate earth rod =1no. (d) Cu-strip 300 X 25 X 6 mm(MEEB)= 1 no. (e) Cu-strip 150 X 25 X 6mm (SEEB) = 1 no. | — | — | — | 2,18,463 | |
| — | 21.00 | — | — | ||
| Supply of Fiber/ SMC/FRP/RCC Earth Chamber or or as per instructions of Engineer In- Charge. | — | — | — | 13,629 | |
| — | 350.00 | — | — | ||
| High density polyethylene pipes (HDPE) of 110 mm/125 mm outer Dia, 10 mm wall thickness, along with one coupler for every 6 Mtr. As per spec. No. Is 4984:2016 with latest amendments and material grade: PE 80. | — | — | — | 2,45,350 | |
| — | 28.00 | — | — | ||
| — | 70.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .