REPAIR TO BOUNDARY WALL, GATES, FENCING, DRAIN, CULVERT AND MISC WORK UNDER AGE B/R-I AT GE JHANSI

Amount

M&L PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, including demolition of concrete, complete all as specified and directed.

M&L for Brickwork with sub class B bricks straight or curved on plan etc 6m mean radius built in CM (1:6), including demolition of existing brickwork of any description etc complete all as specified and directed

M&L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surface as in finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel and drain etc complete all as specified and directed.

Dismantling post or struts (wood, steel or RCC) any section incl taking out embeded portion in concrete, brick work, RR masonary etc. and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire any type complete all as specified and directed.

Excavating in post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface.

M&L PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M & L for angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E165 complete all as directed by Engr-in-Charge.

Supply and fixing 10mm dia mild steel round bars(straight or cambered) bearing bars or similar items such as bars for tightening of chain link fencing complete all as specified and directed.

S&F mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut not exc 5cm and dia of shank 11 to 15mm complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing chain link fencing of MS GI wire mesh of size 100x 100 mm of 4 mm dia of GI wire including line wires,fixed to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Taking down exisiting fencing and Refixing of Chain link fencing including line wires, any mesh, size and type to any type of standerd, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

S & F in repairs galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples of steel pins etc. all as specified and directed .

M&L for RCC Nominal mix type B1 1:2:4 (using 20mm graded stone aggregates) as in column, including demolition of exsiting RCC in any position not otherwise described for complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia ccomplete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal complete all as specified and directed.

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs except roof curbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies, type B0, 1:2:4 (using 12.5 mm graded agg) 45mm thick (measured solid), including all mouldings but excluding frame and set in cm 1:4 complete all as specified and directed.

M &L preparing new surfaces of plastered or unplastered surfaces and applying two coat of cement base paint over a coat of cement based primer complete all as specified and as directed.

FTH Traders

Khushi Muskan Engineer & Developer

HARNAM SINGH ANIL SINGH

M/S NASIM AND CO.

M/sDaljeet singh keer

Dubey Construction Company

M/s Jagdish Chandra Arora

ARTISTIC BUILD CO

M/S Kesav Dev Agarwal

Yashoghan Construction

M/S GR construction compony

Shri Tirupati Associates