Road per Abu Nala Pratham PAC dakshin patari hote hue Delhi Saharanpur railway line per dense dwara Nirman karya

TACK COAT @ .25KG/SQM Providing and applying tack coat with Bitumen emulsion (VG-10) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Dence Graded Bituminous Macadam (DBM)@4.5% Providing and laying dence grade bituminous macdanam with 100-120 TPH batch type hot mix plant producing an avreage output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituninous binder @ 4.0 to 4.5 % by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compection as per Morth spefication clause No. 507. complete in all respects

TACK COAT @ .25KG/SQMP PProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Bitumen Concrete @ 5.40 % Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an avreage output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituninous binder @ 5.4 to 5.6 % of mix an filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compection as per Morth spefication clause No. 509. complete in all respects

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, VAT etc. all T&P/machine material and labour required for proper completion of work (Excluding GST) As per SI.No. 7

S/F of MS sign board made up of 40x40x6 mm angle iron (vertical post of 2.75m ) 40x5mm flat cross angle, 1.0mm thick MS sheet (1.2x0.90m) including excavation of pit (0.45x0.45x0.45m), cement concrete, 10:5:1 with brick ballast, fine sand and cement, 10cm thick, cast cement concrete 1:2:4 with cement C/Sand and 20mm stone grit (0.35x035x0.35 cum) 2 coat painting, painting of letter up to 2.5 cm size etc. complete as per direction of E/I.