REPAIR TO ROOF TREATMEN CGI SHEET GALVALUME SHEET DRAINAGE PIPE AND TANK CLEANING IN AGE BR II UNDER GE DANAPUR CANTT

Amount

Taking down roof treatment of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd.

M&L for rendering 10 mm thick in cement mortar 1:4, in concrete surfaces, /on roof mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid),ISI marked.

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

Dismantling AC/CGI (corrugated, semi corrugated, etc), as in roof covering complete all as specified and directed.

Dismantling unframed timber scantling 40 Sq.cm and over in section, in any position complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed..

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with J or L type hook bolt complete all as specified and directed.

S& F 6mm thick Asbestos cement twopiece adjustable plain wing ridge fixed with Jor L type hook bolt complete all as specified and directed.

Fixing only old sheet of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with J or L type hook bolt complete all as specified and directed. Note :- Old sheet shall be used retrived form item No. 5 above

Demolition of brick work of any description built in cement mortar including all quoins, arches but excluding pre-cast articles etc complete all as specified and directed.

M&L for brick work with old size bricks (sub class 'B' bricks) straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

All as per item No 14.00 but except brick complete all as specified and directed.

M&L for plain Cement concrete 1:3:6 Type C-2 using 20 mm graded aggregate as in surface channel and for similar work including necessary form work complete all as specified and directed.

M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in roof curb r mud stops ,coping benching and surface channel and for similar work including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel using extra cement including forms moulded etc complete all as specified and directed for the following inner girth of drain upto 30 CM complete all as specified and directed.

M&L for precast RCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in manholes covers including form work etc set in CM 1:6 complete all as specified and directed.

M&L for MS TMT bar 5mm dia & over up to 10mm dia for distribution bar,stirrups, spacer etc ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for plain cement concrete 1:4:8 Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete for manholes, Septic tanks & drains and for similar work complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of exc. 250 Litres but not exc. 500 Litres complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of exc. 500 Litres but not exc. 1000 Litres complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of exc. 1000 Litres but not exc. 2000 Litres complete all as specified and directed.

S&F in repair ball valves high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed bore of pipe 15 mm dia complete all as specified and directed

S&F in repair for gate valve 20mm dia, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repair for gate valve 15mm dia, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repairs PVC connection 15mm dia , 60 cm long with brass ferrules/nuts at both ends complete all as specified and directed.

Taking down or up 15 mm bore steel tubing and connections complete all as specified and directed.

Taking down or up 20 mm bore steel tubing and connections complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Re-fixing old 15 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from under this item No. 30.

Re-fixing old 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from under this item No. 31.

S&F as in repair PVC water storage tank cover heavy duty for 500/1000 ltr capacity OHT all complete all as specified and directed.

S&F as in repair vitreous china wash hand basin, white, flat back, size 550x400 mm chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand.

S&F as in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (exluding flushing cistern and flush pipe) including lime concrete bedding complete all as specified and directed.

S&F as in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete all as specified and directed.

S&F PVC (SWR) 'P' trap or 'S' trap of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F in repair pillar tap mixer cast copper alloy fency type with capastan headsm chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock/stop cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair chromium plated soap dish of any type fixed to wall with screw complete all as specified and directed.

S&F in repair 40 mm dia UPVC pipe fixed to WHB and urinal for out let of waste water, fixed in floor, wall including all fittings such as elbow, socket, tee, reducer etc complete all as specified.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

M&L as in repair PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M&L as in repair PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F as in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with clamp made out of 25x3 mm flat iron, 6mm dia rod bar, nuts & bolts complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT complete all as specified and directed.

M&L for hardcore of broken stones or boulders guage n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for glazed coloured tiles (size 450x300x7mm thick) in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick plaster in cement mortar 1:4 as a baking coat for fixing of wall tiles complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

M&L for anodised aluminium snap grid frame work with supporting hangers comprising of GI wire 4 mm dia with J hook, nuts/bolts etc for false ceiling with size of grid 605 x 605 mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm eighing 0.24 Kg per RM and wall angle 23.5 x 26.4 x 1.4 mm eighing 0.191 Kg per RM respectively complete all as specified and directed.

M&L for 6 mm thick E-board of size 600 x 600 mm fixed to aluminium snap grid frame work as in ceiling flat or sloping conforming to IS-14862 complete all as specified & directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and wall of cement concrete for inserting of rolled mild steel structural steel work and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.00 m long including nut/washer complete all as specified and directed.

S&F in repair chromium plated overhead shower rose swivel type 80 mm with CP arms 300 mm long complete all as specified and directed.

M/S Priya Trading Agency

jaglalchoudharyandsons

RADHESHYAM PASWAN