Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹15.5 LAWARDED | AWARDED |
Tender Value
₹20.7 L
EMD Value
₹51,800
Closing Date
8 Oct 2025, 9:30 pmClosed
Rural Development and Panchayat Raj Department
PACKAGE NO-04-Paint work and other repair work inside the main hall of Room renovation and repair work of UGD and septic tanks Office, Planning Estimate and Valuation Officers, Installation of grills and pigeon mesh for generators, switch boxes and batteries on 03 sides in the basement of the, building. Aluminium partition work in NREGA branch of Installation of stainless mesh and other works for all windows in the BNG South Dist
RDPR/2025-26/BD/WORK_INDENT19263
RDPR/2025-26/BD/WORK_INDENT19263
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Ramanagaar
₹520
₹51,800
26 Sept 2025
26 Sept 2025
7 Oct 2025
PACKAGE NO-04-Paint work and other repair work inside the main hall of Room renovation and repair work of UGD and septic tanks Office, Planning Estimate and Valuation Officers, Installation of grills and pigeon mesh for generators, switch boxes and batteries on 03 sides in the basement of the, building. Aluminium partition work in NREGA branch of Installation of stainless mesh and other works for all windows in the BNG South Dist
Removing white wash or colour wash by steel brushing and / or scraping,sand papering and preparing wall surface smooth including repairs toscraches including cost of labour, material complete as per s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing false ceiling at all height including providing and fixingof frame work made of special sections, power pressed from M.S. sheetsand galvanized with zinc coating of 120 g/m2 (both ...
Supplying of..TR Invertor type split Air condition erssuitable for operationon A/C supply single phase 50Hz 230Vwithhermeticallysealedinvertercompressorwith aircooledcondenser ,latest R410A /R32refrig...
Installation charges for split type air conditioner with allied works for one in door and one out door unitis to be mount edonsuitable Angle Iron support upto 3.0 Ton split/cassette type A/C. ---- wit...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foaminsulation 3 core 80 standcopperwiringbetweenindoorandoutdoorunitLeaktestingoiland gas charging fo...
Extra for Fabrication supply and fixing of Stand fabricat edusings lotted angle /L angle of size 6mmx50mm form ounting outdoor/indoor A.C. unit/ Batteries. ---- with all lead and lift and loading and...
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS21...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing on wall face unplasticised Rigid PVC water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for th...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing and fixing brass bib cock of approved quality :20 mm nominal bore ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire char...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete 10 litre (full flush) capacity-white. ---- with all lead and lift and loading and unloading c...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing :Circular sha...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- with all lead and lift and loading and unloading charges cost and conve...
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends ,junction box,elbows, screw satan interval of 300 mm as required 50 mm. ---- with all lead an...
SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volt...
Supply of round / square recess/surface mounted rolling type LED Down light with..WGU10 LED Lamp RibFabricatedfromdiecastaluminiumwithwhitepowdercoatedprewiredtomainsconnector hasswivellingunitofalumi...
Removing white wash or colour wash by steel brushing and / or scraping,sand papering and preparing wall surface smooth including repairs toscraches including cost of labour, material complete as per s...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy ---- with all lead and lift ...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy ---- with all lead and lift and loa...
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charg...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . Circular...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe ...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .