Loading
Loading…
Loading…
Tender Value
₹21.2 L
EMD Value
₹42,469
Closing Date
8 Jun 2026, 4:00 pmDue tomorrow
EE MN
O/o EE(M/N) 3rd Floor, Mohan Singh Place, New Delhi
Repairing servicing Installation Testing and commissioning of 13 Nos of 11KV HT VCB Megawin Panels at ESS BD Marg
2026_NDMC_292431_1
01/EE(M/N)/2026-27
Open Tender
Electrical Works
60 days
Mohan Singh Place
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹42,469
1 Jun 2026
1 Jun 2026
8 Jun 2026
1 Jun 2026
8 Jun 2026
1 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Part A : Electrical Work
Installation, Testing & Commissioning of 11kv HT VCB Panel 630Amp (I/C, B/C, O/G) | - | job | 20,000 | - |
| 2 | Supply, Installation ,Testing and commissioning (SITC) of Battery tripping unit alongwith maintenance free batteryes as per specification . | - | No. | 1,29,600.64 | - |
| 3 | Providing Conductive concrete earth grid of 2 Nos interconnected earth electrode with installation and testing connection including connection with application normal soil earthing to deliver earth results not exceeding 2 ohm.i.e HT panel board (chemical earthing) | - | Job | 94,141.84 | - |
| 4 | Providing and fixing 25 mmx5 mm GI strip in 40 mm dia GI pipe in surface or recess as required | - | mtr. | 222.07 | - |
| 5 | Providing and fixing 25 mmx5 mm GI strip in 40 mm dia GI pipe from earth electrode including connection with brass nut , bolt, spring ,washer excavation and refilling etc as required | - | mtr. | 642.54 | - |
| 6 | Supplying and fixing of synthetic insulating MAT 2.5 mm thickness and one meter width suitable for 11 KV HT panel board ISI mark having Di- electric strenth 45 KV , conferming to IS 15625:2006, complete in all respect as per site requirement. | - | mtr. | 6,077.97 | - |
| 7 | Supply and fixing of push on type right angle cable boots (end cap) suitable for 11kv HT cable of size upto 400sqmm/3C for each phase as per requirement ( Make Cabseal/ 3M/ Rachem) (03 No in each set) | - | set | 5,991.53 | - |
| 8 | Repairing, servicing, overhauling and testing of 11kv VCB and their operation mechanism i/c replacement of damaged/burnt parts with new parts and re-fixing as reqd. after cleaning,oiling, greasing , alignment of breakers and anti- oxidant treatment on vaccum interrupter carrier with providing & fixing of space heater. | - | job | 16,500 | - |
| 9 | Cleaning of CTs chambers PTs connections(PT panels) replacement of PT fuses & tightening of all the contacts of 11kv cable end coating with anti-oxidant treatment etc. as required | - | job | 8,200 | - |
| 10 | Cleaning of carbon from bus bars of HT panel board and providing of epoxy insulating coating with antioxidants treatment on 11kv Bus bars and metallic parts up to cable end etc as required including material, tightening of all contacts in bus bar chamber, replacement of damage/ burnt parts with new parts after cleaning and testing the same as required voltage level etc. Checking and proper sealing of holes/ penetration & Gap filling using proper puff sealant and equivalent. | - | job | 12,000 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.09 MB
BOQ_388417.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid