Construction of Community Hall at Adi Dravidar Colony in Sirupakkam panchayat

Amount

Construction of Community Hall @ Adidravidar Colony in Sirupakkam panchayat

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

Filling River Sand including cost and conveyance loading unloading from approved quarry to work site and labour charges for filling, ramming, etc. complete

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance, labour charges etc.

Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc.

Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc.Super Structure

Supply and errecting sheet centering of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete

Supply and fabrication of steel for RCC works including cost and conveyance charges etc

RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete Upto Basement

RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete Above Basement

Brick jelly Lime concrete by using 20 mm brick jelly with lime in the ratio of 32 : 12.5 including cost conveyance of all materials and labour charges for mixing laying compacting well beaten with wooden batens etc complete

Finishing the Top of Roof with one course of Pressed Tiles of size 20 cm x 20 cm x 2 cm laid in cement mortor 1 : 3 and pointing with the same mortor mixed with water proof compound including cost and conveyance off all materials and labour charges etc complete

Special ceiling Plastering with CM 1:3 10mm thick including cost and conveyance charges etc.,

Plastering in CM 1:5, 12mm thick including cost and conveyance charges etc.,

Plastering in CM 1:4 20mm thick including cost and conveyance of all materials and labour charges etc. complete

Paving the floor with Vertified tiles of size 600x600x8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Msand) base mortar over the existing floor including cutting the tiles to the required size with special cutter wherever necessary, la

Supply of the following steel doors, windows and ventilators to Office, etc. complete Main Door - D

Main Door - DDoor - D1

Door - D1Door - D2 pvc door

Door - D2 pvc doorWindow - W

Window - WWindow - W1

Window - W1Ventilator

Ventilator Ventilator

110mm PVC pipe 10Ksc

Filling 40mm ISS HBG metal etc. complete

Filling 20mm ISS HBG metal etc. complete

Supply of Manhole cover 60cm x 60 cm 2 Nos.

Painting Two Coats of OIL Bound Distember of approved colour over one Primer Coat including cost of Paint and labour charges etc complete

Painting Two Coats with Cement Paint of approved colour over one Primer coat including cost of Paint and labour charges etc complete

Painting two coats with ready mixed paint including cost and conveyance charges etc.

Fixing Charges for Steel Door in Position etc complete

Supply and Fixing of Cudapah Slab of 25mm/40mm thick including cost and conveyance of all materials and labour charges etc complete

Fixing Charges for Steel Windows in Position etc complete

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW box 150 mm x 100 mm x 113 mm for 5 A 3 Pin non inter locking cs plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire for PVC PLUG Point S D N o 34

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for OPEN PVC Light Point and Fan Point ( For Eloctronic Regulator ) S D N o 18

Supply and Fixing of 18 W CFL in the existing light point

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing ( S D N o 137 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains ( S D No 64 )

Providing Fan with accessories etc. complete

Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard for incandescent lamp with 60 w Bulb S D No 80

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable pipe b class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N o 69 )

Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard for incandescent lamp with 60 w Bulb S D No 80

Supply and fixing of 1200 mm ( 48" ) A C Ceiling Fan complete with stepped eloctronic 300 w regulator with 1.00 meter down Rod on the existing clamp S D N o 103

Provision for Metre Board

Provision for EB Deposit charges

Providing Sanitary arrangements

Providing Water supply arrangements

Provision for Lock and Key

Providing Rain water Structure

Providing Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SURYAKUMAR S (BID ID -1392510)