SPECIAL REPAIRS TO CERTAIN MARRIED ACCN AT

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 10 mm thick cement plaster in CM 1:6 on brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for rendering 20mm thick cement plaster in CM 1:4 (15mm as 1st coat and5mm in finishing coat using water proofing compound on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed.Note : Water proofing compound and will be measured and paid separately.

Supply integral water proofing compound

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over the alkali resistance priming paint primer over 3mm thick wall care putty complete all as specified and as directed.

M&L for Preparing new plastered external surface of wall and applying two Coats of Acrylic elastomeric exterior waterproof coating (Dr. Fixit Raincoat or of equivalent make mentioned in list of manufacturers herein after) with extra coat on rain lashed walls, dead walls, projections & Parapet wall top on primed surface with Efflorescence resistant penetrating primer (Dr. Fixit Primeseal or of equivalent make mentioned in list of manufacturers herein after) diluted with 50% water, Work shall be executed by engaging the approved applicator of the manufacturer and as approved by GE.

M&L for complete removal of existing treatment of old painted external surface of wall and applying two Coats of Acrylic elastomeric exterior water proof coating (Dr. Fixit Raincoat or of equivalent make mentioned in list of manufacturers herein after) with extra coat on rain lashed walls, dead walls, projections & Parapet wall top on primed surface with Efflorescence resistant penetrating primer (Dr. Fixit Primeseal or of equivalent make mentioned in list of manufacturers herein after) diluted with 50% water. Work shall be executed by engaging the approved applicator of the manufacturer and as approved by GE.

M&L for complete removal of existing treatment of old painted wall surfaces and praparing and applying two coat of oil bound distemper over alkali resistance primimg paint primer over 3.00 mm thick white cement based wall care putty smooth finish etc of approved make & shade on walls and other places complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted ceiling surfaces, preparation of old surfaces and applying two coat of white wash complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Dismantling stone slabs and tiles of any descritpion or thickness in floors/skirting laid bedded in any mortar complete all as specified and directed.

M&L machine cut granite 16-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed by Engineer-in -charge.

S&F machine cut and machine polished, green marble, 16-18mm thick in single piece as in cooking platform bedded, window cill,Jambs, Trade, Riser, landing etc jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including backing coat of rendering 10 mm thick in CM 1:4 all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (desined pattren) (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/dado laid over 15mm thick screed bed in CM 1:6 . set and jointed in neat cement slurry and pointed in white or coloured cement to match

S&F glazed ceramic coloured tiles (300mmx 450mmx7 mm) in vertical surfaces jointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc over 10 mm thick backing coats of cement plaster in CM (1:4) complete all as specified and directed.

Taking down steel/aluminium windows/ventilator of any type any size complete with all fittings.

S&F Powder coated aluminium three track, three shutter (equal width) type window miniumum 15 micron anodised with frame made of aluminium sections of size 91.80 x 31.75 x 1.0mm and shutters made out of aluminium sections 39.4 x17.7 x 1.0mm without sash bars including necessary jointing cleats, glazing clips, rubber packing, anodised snap beadings, screws aluminium fittings lockings arragngements etc including 4.00mm thick sheet glass for glazed shutters and stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire gauge shutter all as specified and as directed, before.

S&F powder coated aluminium ventilator partly fixed and partly louvered type without sash bar section as per minimum 15 micron anodised including necessary jointing, clip, rubber packing, anodised snap beading crews and 4mm thick pin headed glass etc complete.

Dismantiling and removing sunken slab filling of brick bats/cinder/light weight concrete including plastering on sunken floor/sides of floor slab/tiles of toilets in all the floors including all the water and sanitary fixtures and removing all rubbish/debris outside MoD land as per instruction complete all as specified and directed.

The suken floor RCC slab including sides to the full extent of sunken portion in upper floor shall be prepared and plastered with 15 mm thick cement plaster in CM 1:3 with water proofing compound as per manufacturer's instructions and finished even and smooth without using extra cement. When the plaster is cured and dried up, apply a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm confirming to IS 702 over a coat of primer @ 0.70 Kg.Sqm over plastered surface complete all as specified and as directed. Note :- Integral water proofing compound shall be measured and paid separately as "Supply only".

Water proofing treatment to Sunken floor slabe complete as specified bellow and as directed. (a) Provide and lay 4mm thick APP modified torch applied prefabricated five layer water proofing membrane weight not less than 3.60 Kg/Sqm. (b) Apply a uniform coat of blown grade bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS 702 of the surface area.

PCC lean concrete 1:5:10 type E2 laid in layers of not more than 100 mm thick tamping etc complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B0 (12.5 mm graded )stone aggregate as padding concrete over lean concrete.

Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed.

M/L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment

M/L for applying Hot Bitumen @ 0.20 Kg/Sqm & oil based bituminous primer @ 0.10 Kg/Sqm providing and laying 4mm thick. APP modified water proofing membrane weighing not less than 4kg/sqm re-inforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sqm, tearing strength of 180N and with thermal insulation with the mineral / graved finish on upper side and laying with torches application and with 10 cm minimum lap in both direction length wise and width wise all as specified and directed by Engr-in-charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight)

Demolition of brick work/stone masonry built in cement mortar including all quoins arches, pillars all as directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 including demolition.

Dismantling of water tanks exc 500 & n exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered 1000 ltrs capacity hoisted and fixed in position including 25mm dia float ball brass valve and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified

Taking down 15mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified.

Taking down 20mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified.

Taking down 25mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified.

Dismantling /taking down PVC/Cast iron soil/waste pipes 100mm/75mm bore including all fitting like bends etc.

S&F CPVC pipes, SDR 11, 25mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and end oieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete all as specified.

S&F CPVC pipes, SDR 11, 20mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors with concealed complete all as specified.

S&F 25 mm dia gate /sluce valave fixed to pipe complete all as specified and directed.

S&F 20 mm dia gate /sluce valave fixed to pipe complete all as specified and directed.

S&F Vitreous china wash down water closet (Padestal pattern) pan white including bolts and flush pipe, pedestal pan and trap including connections to drain (or outgoing pipe) and flushing pipe etc including seat cover closed type complete fixed in repairs.

S&F Vitreous china white flat back of size 450x300mm wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs.

S&F 10 litre PVC valveless, duel function syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S&F Flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level cistern.

S&F PVC connection low density polythene pipe 15mm dia, 450mm long, heavy duty with PTMT nuts.

S&F waste fittings 32mm dia, brass, chromium plated for glazedware sinks, basins, etc, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete specified and as directed.,

S&F in repairs Bib taps, fancy type, chromium plated with crutch sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs15mm bore brass CP Mixer for mixing hot and cold water screwed iron /PVC pipe with long screwed shanks and fly-nuts, complete all as specified and as directed.

S&F in repairs 15mm stop cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair soap dish of any type fixed to plugs with chromium plated with brass screws complete all as specified and directed.

S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook all as specified and as directed.

S&F in repairs acrylic cabinet mirror of size 450mm X600mm fixed with wooden plugs with cromium plated screw and cup washers, complete all as specified and directed, Make shall be of M/s Commander , M/s Jasmine or equivalent.

S&F 20mm dia towel rail chromium plated 60cm long including bracket fixed with stainless screws complete all as specified.

S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed.

S&F PVC (SWR) pipes of dia 110mm bore double socketed in any length with rubber ring joints fixed to wallsComplete all as specifiedand as directed by Engineer-in-Charge..

S&F PVC (SWR) pipe of 75mm bore in double socketed in any length with rubber ring joints fixed to wallsComplete all as specifiedand as directed by Engineer-in-Charge..

S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore in radiusComplete all as specifiedand as directed by Engineer-in-Charge.

S&F PVC (SWR) bends of 110mm bore in radiusComplete all as specifiedand as directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece double Y equal or unequal of 75mm bore in radiusComplete all as specifiedand as directed by Engineer-in-Charge..

S&F PVC (SWR) branch piece double Y equal or unequal of 110mm bore in radiusComplete all as specifiedand as directed by Engineer-in-Charge..

S&F Stainless steel curtain rails fixed with clump and ornamental brackets, stops, rollers etc fixed in repair incl brakets complete all as specified and directed.

S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked.

S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm made of 12mm square bar conforming to the sample approved and as directed by Engineer- in -charge.

Removal of demolished material/ debries from site out side of the Defence land complete all as specified and directed.

M&L for chajja repairs with 1:2:4 concrete for dubbing and 15 mm thick plaster with water proofing compound including dismantling loose plaster/ rcc and scaffolding and necessary formwork etc compete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply two coat of synthetic enamel paint complete all as specified and as directed.

S&F roof trusses (framed), sunshade frames, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W(Gde-E-250) including taking down all as specified and directed

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including taking down complete all as specified and directed.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165.

Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of n exe 1.5 sqm complete all as specified and as directed incl stacking the materials properly.

Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and as directed incl stacking the materials properly.

S&F for factory made Solid PVC moulded door frame of size 50mm x 47 mm reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F factory made Solid PVC Double moulded door frame of size 50mm x 95mm made out of PVC supplying & Fixing in opening as directed byEngineer -in -charge.

S&F Factory made Moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping and manufacturer's specification & drawing etc, complete all as specified and directed.

Ditto all as SI Item No 77 above but wire gauzed i.e pannel will be of wire gauze in lieu of single side prelam PVC sheet pannel. The wire gauze shall be wrapped on an addtional square 8 mm MS solid tube and and this tube shall be welded to MS tubes. The wire shall be streched to tighten firmily all as specified and directed

S & F 100 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 Complete all as specifiedand as directed by Engineer-in-Charge.

S&F 125mm long Extruded brass handles, fabricated type polishedComplete all as specifiedand as directed by Engineer-in-Charge.

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long.

S&F 150mm Floor door stopper of bass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedComplete all as specifiedand as directed by Engineer-in-Charge.

M&L for 18/19 mm thick Venneered particle board solid core exterior grade with decorative face veneers one face fixed to timber frame-work with screws fixed in repairs complete all as specified and directed.

M&L for second class clean sawn hardwood in scantling fixed in timber framed work for cup board frame complete all as specified and directed.

S&F 50 mm stainless steel butt hinges complete all as specified and as directed

S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 100mm longComplete all as specifiedand as directed by Engineer-in-Charge.

S&F 75 mm long Extruded brass handles, fabricated type polishedComplete all as specifiedand as directed by Engineer-in-Charge.

S&F Magnetic cather for cupboard fixed with fixing arrangement complete all as specified .

S&F 15mm dia Al plain rod with clip fixing in cupboard complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC 1:3:6 Mix Type C1 (using 20 mm graded stone aggregates), 75mm thick as in plinth protection, complete all as specified and as directed.

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. One light point or one fan point or Exhaust fan controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.

All as per item No.2 here in before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately).

S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S & F socket out let, 2 in 1, 3 pin, 5 Amps, 240 volts complete all as specified and directed.

S & F Switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed.

S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed.

S & F switch bell push, flush type 5 Amp. Complete all as specified and directed

S & F Ceiling rose, 3 way PVC insulated body complete all as specified and directed by engineer in charge.

Supply only 20 Watt LED Tube Light (4 feet) Ultra bright, (single side connection) with very high efficacy & THD <15% best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light. Make:- PHOTONNULTRAE2.01213T8SSTL20WLED865SPC Havells OR Equivalent to Halonix/Philips

Supply only in replacement of LED Batten 1x 20W, 220V, AC, with driver, holder excluding LED tube light mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make:- REGALBATTENT8UPTO1X22WSSBSWHNW Havells OR Equivalent to Halonix/Philips

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Crompton or equivlent Bajaj/Philips/Havells

Supply & Fixing of 20 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge. Make:-SZPSLMM020 Shakti/Philips/ Halonix/Havells

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply & fix exhaust fans steel body AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.Note:- Cost of making hole for Exhaust fan of required size at site is deemed to be included in qoted rates.SKU Code-70003 Bajaj Equivalent to Philips/Crompton

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB all as specified and directed

Taking down electric meter of any type and any make single/three phase by dismantling of all electrical connection checked the meter, and Refixed same Nos of meter on wooden board in metal box of suitable size in same Nos of quarter after repair works completed.

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

Supply and fixing MCB TPN/FP 40 To 100 AMP 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.

S&F in replacemen MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed.Make:Havells QVE series or equivlent legerend/standard/indoasian

M&L for sub main wiring drawing through PVC casing and capping with Wiring alongwith earth wire size 4x4.0 sq. mm +2x4 sq. mm earth wire earth wire of FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required .Note:- Four run of 4 sqmm wire and Two run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.

Supply lay and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 35 sq mm 3.5 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as diercted.

S&F in repairs MCB SP 5 To 32 AMP, single pole 240 Volts 10KA ''C''&''B'' curve , as per site requirment,Complete all as specified and directed.

S&F in repairs MCB SPN 6-32 AMP, 240 Volts 10KA 'C' curve , Complete all as specified and directed.

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose Soil complete as specified & directed

Cutting bituminus road as per direction of Engr in Charge for laying of UG cable and match the existing road to the existing system.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/soil complete all as specified and directed

Removing excavated material n. exc. 50 M away and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and as directed.

M&L Sand cushioning for UG cable protection/ducts, consolidated sand compacted with clean dry sand all as directed and specified.

Supplying and laying factory cast un-reinforced precast concrete cable cover, embossed the mark " LT CABLE" class LV, type 1 with peak, size 250mm x 150mm x 40m laid in trenches as specified and as directed .

S&F MCB DB TPN 4 ways double door with 440 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed Make:Havells QVE series or equivlent legerend/standard/indoasian

seema enterprises (BID ID -3120417)

DWARKESH STRUCT-CON (BID ID -3120085)

M/s S.D Construction Co (BID ID -3122620)

SAI SAMARTH ENTERPRISES (BID ID -3122932)

VIJAYA ENTERPRISES (BID ID -3123363)

United Engineers and Contractors (BID ID -3119900)