SPECIAL REPAIRS TO CCD SCHEME PAINTING (SIGMA MK-III) FOR VARIOUS BUILDINGS AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI

Amount

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Rendering 15mm thick in cement mortar CM 1:4 in two layer (First coat 10 mm thick and second 5 mm thick) mixed with water proofing compound @3% by weight of cement (in top layer ) as in window projection/ chajjas / slabs and finished even. (WPC will be measured and paid separetly)

Supply only integral water proofing compound complete all as directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces of wall projected face of chajja, projected face of roof slabs & face and sides of sunshade including preparation of surfaces including cornices, plasters etc complete and applying two coat of exterior emulsion paint in pattern (two or mord colour combination) over one coat of alkali resistant priming paint over 1.5mm thick wall care putty complete all as specified and as directed by the Engr-in-Charge. (Note : Design, pattern & colour will be approved by the GE)

M&L for complete removal of existing treatment from wall projected face of chajja, projected face of roof slabs & face and sides of sunshade including preparation of surfaces including cornices, plasters etc complete and applying two coat of exterior emulsion paint in pattern (two of more colour combinatio) over one coat of alkali resistant primingpaint over 1.5mm thick wall care putty complete all as specified and as directed by the Engr-in-Charge. (Note : Design, pattern & colour will be approved by the GE)

M&L for complete removal of existing paint from steel surfaces by paint removers or burning by blow lamp and cleaning with scrapers any number of coats of any description exceeding 10cm width or girth including preparation of surface and applying two coat of synthetic enamel paint in comoflage pattern (two or mord colour combination) over one coat of one coat red oxide primer complete all as specified and as directed by the Engr-in-Charge. (Note : Design, pattern & colour will be approved by the GE)

Taking down carefully unserviceable distribution boards including disconnecting of incoming and outgoing connections complete all as specified and directed.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

S&F factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed.

Supply and fix MCB SPN 40 to 63 Amp Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and fix MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and fix Sub main wiring complete with two runs of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through PVC conduit in walls all as specified and as directed.

Supply and fix Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through non metallic conduit in walls all as specified and as directed.

Supply and fix Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through PVC conduit in walls all as specified and as directed.

Supply and fix Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through non metallic conduit in walls all as specified and as directed.

S&F blank plate of suitable size for open space in distribution boards complete all as specified and directed.

Supply and fix in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Supply and fix in repair MCCB 125 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Supply and fix in repair MCCB 100 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Supply and fix in repair MCCB 63 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 20 A capacity complete all as specified and directed by Engineer in charge.

M & L in replacement for only twin core PVC insulated unarmoured cable 10 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor complete all as specified and directed by Engr-in-Charge.

M & L in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire

M & L for meter boxes made out of transparent polycarbonate having mounting arrangement for 4 Nos electric meters with suitable capacity TPN bus bar MCB SPN for control each meter and locking arrangement complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

Bharat Trading Company

M/S SATISH KUMAR

M/S R S Traders

M.R. ENTERPRISES

M/S Rakesh Singh

M/S KESRI WORKERS

Mohit Enterprises

M/S V K MEHROTRA