SPECIAL REPAIRS OF DRAIN ALONGWITH PATH AT OR MAP ACCN (JAGDISH ENCLAVE) AT 506 ABW UNDER GE (EAST) JABALPUR

Dismantling stone slab or similar work of paver block ett in paving or in aprons etc any thickness or description laid dry and pointed complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in any position not otherwise specifically provided for complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for 60 mm thick rubber moulded reflective surface PU coated, factory made, coloured, Machine pressed precast concrete interlocking paver blocks/ tiles conforming to IS 15658-2006, M-40 designation of concrete as approved by GE, in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for 80 mm thick rubber moulded reflective surface PU coated, factory made, coloured, Machine pressed precast concrete interlocking paver blocks/ tiles conforming to IS 15658-2006, M-40 designation of concrete as approved by GE, in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

Fixing only 60 mm thick rubber moulded reflective surface PU coated, factory made, coloured, Machine pressed precast concrete interlocking paver blocks/ tiles conforming to IS 15658-2006, M-40 designation of concrete as approved by GE, in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled & rammed including watering, rolled and consolidated to required gradient and camber complete all specified and directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified & directed.

M&L for coloured rubber moulded chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over & including 20 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified & directed.

M&L for 100mm thick Cement Concrete Type B-1, 1:2:4 using 40 mm graded stone aggregate as in path/ hard standing surface finished with broom even and fair complete all as specified and directed.

M&L for forming construction joint 90 mm deep x 10 mm wide filled with grade 'A' sealing compound complete all as specified & directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:6 cement mortar complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:3 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

Excavation in trenches in soft/loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan & getting out complete all as specified & directed.

M&L for Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in surface channels & drains complete all as specified & as directed.

M&L for Extra for forming fair finished drain or channel of inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition & breaking up of 300 mm Internal dia, drain pipes (Salt glazed ware, AC or Reinforced Concrete) set in cement mortar complete all as specified and directed.

Demolition & breaking up of 450 mm Internal dia, drain pipes (Salt glazed ware, AC or Reinforced Concrete) set in cement mortar complete all as specified and directed.

M&L for Reinforced Cement Concrete Pipes, Class NP3, 300 mm bore laid & jointed complete with collars complete all as specified & directed.

M&L for Reinforced Cement Concrete Pipes, Class NP3, 450 mm bore laid & jointed complete with collars complete all as specified & directed.

M&L for Cement Concrete bed Type C-2, 1:3:6 (using 40 mm graded stone aggregate) to 300 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

M&L for Cement Concrete bed Type C-2, 1:3:6 (using 40 mm graded stone aggregate) to 450 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all specified and directed.

M&L for Providing Precast Cement Concrete Type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc. & setting in 1:6 cement mortar including necessary formwork if required complete all as specified & as directed.

S&F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F of Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Form Work to faces of walls, retaining walls, abutments, parapets & staircase railings & similar work including attached pillasters, buttresses, etc., vertical or to batter, rough finished flat surfaces of concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete M-25 (20 mm graded aggregates) in walls, retaining walls, basement walls, ballast walls & the like; any thickness; above top of footings; including attached pillasters & buttresses complete all as specified and directed.

M&L for Reinforced Cement Concrete M-25 (20 mm graded aggregates) in Foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles & mass concrete complete all as specified and directed.

M&L for Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed.

M&L for Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed.

M&L hand packing (any thickness) at back of walls over arches etc with broken stone or boulders use as filter media and raising (or lowering) to the required level complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

M&L for providing Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L Preparation of previously treaterd surfaces over the kerb stone surface and applying one coat of synthetic enamel paint

Schedule of credit amount of Rs 2,13,750.00 to be deducted during AOC

Please Enable Macros to View BoQ information