Repair/maint of boundry wall, drains etc in restricted area under AGE B/R (P-1) at Faridkot Mil Stn

Amount

Dismantling posts or struts (wood, steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed .

S&F angle iron posts and struts in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality complete all as specified and directed

Fixing only angle iron posts and struts in fencing as retrieved from Ser item No 01here-in-before complete all as specified and directed .

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed .

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Dismantling fencing wire mesh, any type complete all as specified and directed .

Supply only mild steel galvanized chain link fencing of any size or type complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.

Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

S&F in repair mild steel flat iron conforming to Fe-290 Gde E-165 quality complete all as specified and directed .

S&F mild steel round bars 10mm dia and over,cut to length,bent to shape conforming to Fe-290 Gde E-165 quality complete all as specified and directed .

M&L for punched tape concertina coil, 600mm diameter ,06 metre openable length,having 50 Nos round per 06 metre, tied with angle iron post with necessary bolts,concertina coil of core wire diameter 2.5mm,blade thickness 0.5mm,blade length 12mm,width of blade 15mm and spacing of blade 26mm complete all as manufacturer and directed . Note: The weight of concertina coil shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account

S&F mild steel screw bolts (machine made),diameter of neck 5 to10mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n. exc. 5cm long including making holes on existing post without taking down complete all as specified and directed .

M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .

S&F in repair galvanised,2strand,steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins etc. complete all as specified and directed .

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for sand filling under floor 25mm thick with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed .

Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc,laid, bedded and pointed in any mortar complete all as specified and directed .

S&F Machine pressed precast concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .

All as per Ser item No 18 here-in-before but except paver blocks. Note:- Paver blocks as retrieved from Ser item No 17 here-in-before shall be used.

M&L for Pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in kerb stone with plain fair faces, smooth finish, including chamfering, weathering, throating etc set in cement mortar 1:4 including excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .

Demolition of cement concrete of any description and in any position not otherwise specificially provided for complete all as specified and directed .

M&L for Preparation of new concrete / bricks surfaces of any description over10 cm width or girth,not otherwise described and applying one coat of synthetic enamel paint, over a coat of primer complete all as specified and directed .

Demolition of brick work or stone/boulder masonry, built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed .

M&L for brick work with sub class 'B' bricks, old size, straight or curved or plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

All as per Ser item No 24 here-in-before but except bricks.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and directed .

M&L for 15 mm thick rendering in cement mortar 1:4, on brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed .

Taking down cement plaster from brick walls /concrete surfaces of any description, including raking out joints,hacking for key,scrubbing down with water etc and its removal from site complete all as specified and directed .

M&L for 5mm thick rough cast over and including 10mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse & cement in the ratio of 1:1:1 over the rendering coat.

Preparation of newly rough cast plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed .

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed .

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 Coarse Sand) the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement Plaster 1:1/2:2 (1 Cement : 1/2 Coarse sand : 2 Stone chipping 10mm nominal size) in panels with grooves all round as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Payment for providing grooves shall be made separately)

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L in repair for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

Taking down old mild steel round bar and re-fixing in the same location or another location after bent to shape by welding/hooking etc complete all as specified and directed .

Dismantling fencing wire mesh and re-fixing in the same location or other location to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

Dismantling of Bricks laid, (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons etc bedded and pointed in any mortar (each layer) complete all as specified and directed.

M&L for Bricks, sub class 'B', laid flat in floors, old size bricks, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for Bricks, sub class 'B', laid on edge in floors, old size bricks, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling ,watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed .

S&F in repair Reinforced concrete pipes of size 300mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar complete all as specified and directed .

M&L for Concrete bed to drain pipes of dia 300mm in cement concrete 1:3:6 type C-2 (using 40mm gradedcrushed stone aggregate) including packing under and haunching against the sides of pipe after laid & tested complete all as specified and direced .

S&F in repair rolled mild steel in plates(plain or chequered) channels,square cut or notched (ordinary or counter sunk) forminf holes ,without any attachment conforming to Fe-290 Gde E-165 quality complete all as specified and directed

S&F in repair rolled mild steel in joist,channel,angle,or tee sections,fixed independently,without connecting plates,etc(cut to ordinary lengths) including welding conforming to Fe-290 Gde E-165 quality complete all as specified and directed

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

M&L for RCC 1:1.5:3, type A1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , shelves and chajjas complete all as specified and directed.

M&L for use and waste of form work to chajjas, soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping ,fair finished surfaces complete all as specified and directed . Note :- A Sum of Rs. 77,897.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 19 (Schedule of credit) of Tender Documents.

SHIV SHAKTI BUILDERS

M/S BSS AND SONS

MS JAIN PAINT AND HARDWARE STORE

mehar buildcon

NEW AMRITSAR CONSTRUCTION COMPANY

M/S RAJESH KUMAR and CO.

msgurjantconstructioncompany