Renovation of First floor of Girls Hostel block 2

Amount

Dismantling wooden door shutter (panelled or glazed), resizing and re-fixing: Dismantling wooden door shutters, resizing according to the changed floor level by cutting and redoing the bottom portion; and re-fixing including cost of fixtures

30 mm thick fully paneled door shutter: Providing and fixing in position fully paneled Nandi/ Mathi wood (approved first class wood) shutters for doors, styles and rails of 30mm thick with bottom and lock rails 180mm wide, top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machinery complete as per specifications

Lath plastering (Drop chejja) with CM 1:3, 50mm thick: KSRB 4-5: Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms center to center both horizontally and vertically, providing and fixing chicken mesh - for drop chajja, facia, backing to cup boards including cost of all materials, labours, providing and removing form work, HOM of machinery, curing, complete as per specifications

GRP door frames 65 x 125 mm size: Providing and fixing 65mm x 125mm size GRP door frame fabricated using E- Glass Chopped Strand Mat (CSM). U.V-stabilized isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooded reinforcement of 6 locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster with fiber reinforcement. Six numbers 260mmx25mmx5mm size ‘S’ shaped M.S. flat hold fast shall be provided with the frame

GRP door frames 65 x 90 mm size: Providing and fixing 65mm x 90mm size GRP door frame fabricated using E- Glass Chopped Strand Mat (CSM). U.V-stabilized isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooded reinforcement of 6 locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster with fiber reinforcement. Six numbers 260mmx25mmx5mm size ‘S’ shaped M.S. flat hold fast shall be provided with the frame

GRP Door shutter 32 mm thick: Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V- stabilized Isophthalic Gelcoat and on layer of 45gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5mm. Expanded polystyrene EPS) structural foam panel of 29mm thickness and a density of 20 kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28x32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall conform to RV/TIFAC Composites Design center Standards and specifications and the door shutters tested in conformation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments

M. S. Grill work: Providing and fixing M. S. grill work for windows, ventilators and other openings using M. S. flats, or M. S. square rods, or combination of M. S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer of zinc chromate, cost of materials, fixtures, scaffoldings, labour and HOM of machinery complete as per specifications

Clay Fret work (Jali) of 7.5 cms thick: Providing and fixing clay fret work (Jali) with smooth surface of approved make and design, fixing using CM 1:3 as per the directions, including cost of all materials, labour, all lead and lifts

Colour anodized double track aluminium windows/ ventilators: KSRB 7.10 : Providing and fixing in position colour anodized aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85 x 31.75 mm. with 1.2mm thick, bottom section weight 0.695kg/m, sides and top sections 1.3mm. thick weight 0.659kg/m; and shutter comprising top and bottom section of size 40mm x 18mm, 1.25mm thick 0.417 kg/m; shutter outer side 40mm x 18mm, 1.25mm.thick weight 0.417kg/m, shutter interlock section 40mm x 26.7mm, 1.1mm thick, weight 0.469 kg/m, the shutter mounted on nylon rollers with approved quality of fixtures such as aluminium handles, tower bolts etc., and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodized 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tennoned and riveted in the assembled frame stiffened with end clip at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, rawl plugs, or teak wood gutties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pre-treated for removal of any rust and protection of further rust formation and coated with greasy materials for non-adhesion of mortar and any other sticky materials, (this coating should be cleaned after installation ) including cost materials, fixtures, labour and HOM of machinery complete as per specifications

Both side polished Cudapa slabs (25mm to 40mm thick): Providing and fixing in position 25mm to 40mm thick both the sides pre-polished Cudapa slabs (for wardrobe racks/ planks) in CM 1:4, including groove cutting in the wall, finishing the groove in CM 1:4 after fixing the slab, including cost of all materials, labour, HOM complete

Laterite masonry for superstructure: Providing and constructing laterite size stone masonry in CM 1:6 using clean sieved approved sand including cost and conveyance of all materials, curing charges etc complete as per specifications, IS 3620/1979 having compressive strength not less than 3.5N/sqmm. for saturated sample - for superstructure in CM 1:6

Brick partition wall in CM 1:4 using 3.5N/sqmm class bricks: KSRB 6-8.3: Providing and constructing partition wall of 10cms thick with ground moulded modular burnt bricks of standard size of class designation 3.5Newton per sqmm with cement mortar 1:4 including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2

CM 1:4 – 20 mm plastering for stone masonry/ concrete surface with waterproofing compound and finishing with floating coat: KSRB 15-3.11: Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry/ Concrete surface; using clean sieved approved sand including providing and mixing waterproofing compound in cement plaster at one kg/square meter, rounding off corners wherever required smooth rendering, and providing a floating coat of cement plastering; and providing and removing scaffolding, including cost of materials, labours, coring complete as per specifications

Cinder concrete for sunken slab: KSRB 8.5: Providing and laying cinder concrete 1:15 using one part of cement and 15 parts of cinder of 12.5 mm nominal size laid on terraces roof or sunken slab, laid to slope, compacting including cost f all materials, curing etc complete as per specification

Cement Concrete M10 mix (1:3:6): KSRB 4.1-7: Providing and laying in position plain cement concrete of mix 1:3:6 (Mix -M10)- with OPC cement at 220 kgs per cum/ with PPC cement, with 20mm and down size graded granite metal coarse aggregates at 0.69cum and fine aggregates at 0.56cum machine mixed, concrete laid in layers not exceeding 15 cms thick , well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications - For Coping/ DPC/ Cill/ foundation/ flooring bed - Specification No. 4.1, 4.2

Rough plastering – CM 1:4 -15 mm: KSRB 15-5.1: Providing 15mm thick rough cement plaster in single coat with cement mortar 1:4, using clean sieved approved sand, to masonry wall for base of dadooing work including rounding off corners, providing and removing scaffolding, including cost of materials, labours, curing complete as per specification

Ceiling plastering: KSRB 15-3.13: Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling using clean sieved approved sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labours, curing complete as per specifications

CM 1:4 – 20 mm plastering for stone masonry/ concrete surface: KSRB 15-3.11: Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry/ Concrete surface using clean sieved approved sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labours, coring complete as per specifications

Vitrified tiles for flooring and skirting: Providing and fixing Vitrified tiles of approved make, quality and colour of size 600x600mm, 10mm thick fixed on existing flooring on a bed of 12 mm thick cement mortar 1:3 mix, flush pointing with white cement using colour pigment, providing spacers at required intervals, including cost of all materials and labour, removing stains etc. complete for flooring and skirting- Makes: Johnson - Marbonite / Kajaria - Kerogress / Equivalent Nitco/ Naveen/ Somany/ equivalent other makes

Flooring with Ceramic tiles: KSRB 14-14.5.2: Providing Ceramic tiles of approved make, shade and colour for flooring, skirting, treads of steps and landings laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing white cement using colour pigment, including cost of materials, curing, labour complete as per specifications – 300x300 mm size tiles -Nitco/ Naveen/ Kajaria/ Johnson/ Regency/ Somany or other equivalent makes

Colour glazed tiles for wall dadooing: KSRB 14-17.2.3: Providing and laying/ fixing colured glazed tiles of size 300x450mm, 6mm thick- for walls, with borders of size 300x100mm set in CM 1:3, pointed with white cement mixed with matching colour pigment including providing and removing scaffolding wherever necessary, cost of materials, labour, curing, cleaning , HOM of equipments etc. complete as per specification - Naveen/ Kajaria/ Johnson/ Regency/Somany/Nitco or equivalent make

Wall putty: Providing and applying two coats of wall putty using white cement putty after scrapping and levelling the surface using steel blade, preparing the surface even and smooth by using different grade sand papers including cost of all materials, labour, scaffolding charges etc complete – over wall and ceiling surface

Plastic emulsion painting for ceiling: Providing and applying painting in two coats with plastic emulsion paint of approved brand (Asian Royale luxury Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) over one coat wall primer of Asian paints Deco Prime wall primer / equivalent on ceiling surface to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications

Plastic emulsion painting for wall: Providing and applying painting in two coats with plastic emulsion paint of approved brand (Asian Royale luxury Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) over one coat wall primer of Asian paints Deco Prime wall primer / equivalent on wall surface to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications

Anti-fungal exterior emulsion paint: Providing and applying anti-fungal exterior emulsion paint in two finishing coats over a coat of primer of approved make [such as Asian Apex / Sherwin Williams /Berger or any other approved equivalent make] as per manufacture specification to external surface at all levels and heights including all labour, scaffolding, cleaning of paint stains, filling cracks with putty, preparing the surface even and sand paper smooth, all lead and lift, painting bands, in different colour/shade, maintaining covering quantity as per manufacture specification etc complete or as directed

Enamel painting on wooden surface: KSRB 15-17.6: Providing and applying painting in two coats on new wood surface and/ or wood-based surface with enamel paint, including primer coat, to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger or equivalent make

Painting to steel work – in two coats: KSRB 15-18.2: Providing and applying enamel metal paint, two coats, including priming coat, over new steel or other metal surface, brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter including cost of all materials, labour etc complete as per specifications. – Asian Apcolite Premium satin enamel/ Nerolac/ Berger or equivalent

Earthwork for foundation – In Hard soil: KSRB 2-2.2: Earthwork excavation for foundation of buildings, column pits, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches, in hard soil not exceeding 3.50 meters in depth, including dressing the bottom and sides of pit and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50 meters after breaking of clods etc complete including cost of labours and HOM of equipment complete as per specifications. Specification No. KBS 2.1 (b)/2.3.5

CPVC plumbing pipes – 20 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold-water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc)- 20mm nominal (Outer dia.) pipes

CPVC plumbing pipes – 40 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold-water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (external work)- 40mm nominal (Outer dia.) pipes

CPVC plumbing pipes – 50 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold-water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (external work)- 50mm nominal (Outer dia.) pipes

Brass Gate valve – 50mm size: KSRB 13-6.3-5: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 50mm nominal bore including cost of materials, labour, HOM of equipment with all leads complete as per specifications. Specification No. 13.2.6/13.3

Brass Gate valve – 40mm size: KSRB 13-6.3-5: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 40mm nominal bore including cost of materials, labour, HOM of equipment with all leads complete as per specifications. Specification No. 13.2.6/13.3

Floor mounted type (pedestal type) English Water closet (European type): Providing white vitreous china clay pedestal type English water closet with P or S trap, with 10ltrs flushing tank (duel flush type) with 40mm dia. flushing pipe, CP brass fittings, with flush pipe, double flapped plastic seat cover, conforming to IS specifications, cutting and making good the wall and floor wherever required, fixing in position as directed including cost of all materials, fixing charges etc complete - Hindware/ Neycer/ Parry/ Cera make/ other equivalent make -white colour

Orissa pan Water -Closet: KSRB 11-4: Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580x440mm with integral type foot rests, 100mm S or P trap, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KSB 11 - Parryware / Hindware / Cera/ equivalent make

SS Angle Cock – 15 mm size: Providing and fixing SS Angle Cock of 15 mm size with wall flange including cost of all materials, labour, transportation, taxes etc complete – Jaquar/ Parryware/JAL/ARK/ equivalent other make

Health Faucet: Providing and fixing Health Faucet with ABS handle and SS tube including cost of all materials, labour, transportation, taxes etc complete - Jaquar/ Parryware/JAL/ARK/ equivalent other make

CP Brass Concealed Stop cock – 15 mm size: Providing and fixing CP Brass Concealed Stop cock – 15 mm size including cost of all materials, labour, transportation, taxes etc complete – Jaquar/ Parryware/JAL/ARK/ equivalent other make

Shower arm with shower rose: KSRB13-6.7-1: Providing and fixing in position chromium plated brass shower arm and rose with wall flange with 15 or 20mm inlet 100mm dia. rose including cost of all materials, labour and HOM of equipment with all leads complete as per specifications. and directions of Engineer's in charge- Specification No. KBS 13.2.16 / 13.3 - Jaquar/ ARK/ Jal or equivalent make

C.P. towel rail of 600mm length: KSRB 11-17.2: Providing and fixing C.P. brass towel rail 600mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P brass screws including cost of materials, labour complete as per specifications

Nahni trap: Providing and fixing PVC Nahni trap of approved quality and make and construction of cistern in CC 1:2:4 and plastered with CM 1:3 wherever necessary – 10 x 7.50 cms size

Bib cock/ Push cock 15mm size: Providing and fixing CP brass Bib cock/ Push cock of 15 mm dia size nominal bore with wall flange including cost of all materials, labour, transportation, HOM etc complete – Jaquar/ ARK/ Jal or equivalent make

600x450mm size Mirror: KSRB 11-15.1: Providing and fixing 600x450mm size bevel lead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with CP screws, washers including cost of all materials, labour complete as per specification

Wall bores: Making wall bores in stone masonry walls up to 0.45 mt width for soil/ water pipe including re-doing with CM 1:4

Filling available excavated earth: KSRB 2.4: Filling available excavated earth (excluding rock) around pipelines/ cables in layers of not exceeding 20cms in depth, compacting of each deposited layer by ramming after watering with all lead and lift including cost of all labours complete as per specifications.

EKADANTHA CONSTRUCTION

BHARATESH V KULAL

sanjeeth

DSOUZA ELECTRICALS

KOTIAN ENGINEERING CONSTRUCTION CONTRACTING