Providing Installation and Commissioning of 300 mm dia machine bore well with 200 mm casing tube well 65 Mtr depth and submersible motor at KVK ETC Pulwama Malangpora SKUAST Kashmir

Amount

Transportation of boring equipment site incl. all sorts of carriage etc . Complete in all respects.

Drilling of 300 MM dia bore bit cost including casing pipe 200 MM dia 6 mm thick MS Casing etc Make Jindal /Surya Prakash inscribed heavy duty Type Heavy

Development of bore well with compressor till sand free water is available, including all sorts of labour charges as required at site for completition of bore well.

P/f of 200 mm Shoe

P/f of 10 HP KSB Motor S. No : Stage 8 Model BPD 242/8ATVMA I 150-8/22

Providing of submersible 10 sq mm flat cable copper Havels / Finolex/Polycab

GI pipe C type with flange after every 10 ft length with welding etc with 4 lengths having perforation standard 2.5 inches dia ID /65mm

Bend GI 100 mm complete

Supplying, installation, testing & commissioning of 20 KVA copper wounded voltage stabilizer with following specification: 1. No. of input phases : Three 2. Frequency : 50HZ ± 3% 3. Capacity : 20 KVA fitted with Voltmeter 0-50 (2-Nos) AE make with roter switch, RYB indication primary and secondary brass terminals with oil 4. Input voltage: 90--200 IP, 3P 155-V 5. Output: 220—200 PN, 400-440V P-P 6. Oil Immersed with oil topping complete with high cut and low cut protection. Make Chinar /Alba /Elnova/Eleient/ABB

MCCB 125 A Make 4 pole 36 KA Hager /Legrand

S/I of Changeover Standard Make 100 Amp TPN

Supply installation testing and commissioning of star delta starter 15 HP range (compatible type), oil immersed with tank (oil filled) with features as below: 1. Semi- Automatic type 2. Under voltage protection 3. Thermal overload protection 4. Single phase preventor protection Kilburn/Equivalent 5. Overload /under load protection The job includes mounting of starter on underneath panel board Complete with internal and external connections etc, Duly tested on load. MakeBentex / Kilburn / L&T

Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr 900 mm x 900 mm) and depth 30 Cm (NS) made out of 2mm thick CRCA sheet having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 200 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd.

2 X 10 sq. mm (19mm) termination

Cable 7/16 AWG for star to delta connection

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. DSR CODE 7.3.1 for 35 Sq mm

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Nuts and bolts of size 70 MM with gas cut washers 22 No

Flat Iron Clamps of size 50 mm

Treading of GI pipes for delivery section and cutting etc

32 mm PVC conduit

20 mm flexible conduit

Note:-The rates quoted should be inclusive of all carriage of materials from source to site of work by mechanical transport/head load complete, services taxes, sales taxes, octori charges etc. and inclusive of structural consultancy charges complete.

M/S MARSHAL TRADERS